While measuring a chain line between two stations and intervened by a raised ground (A) Vision gets obstructed (B) Chaining gets obstructed (C) Both vision and chaining get obstructed (D) All the above

While measuring a chain line between two stations and intervened by a raised ground
(A) Vision gets obstructed
(B) Chaining gets obstructed
(C) Both vision and chaining get obstructed
(D) All the above
by

1 Answer

Answer :

(A) Vision gets obstructed
by

Related questions

Pick up the correct statement from the following: (A) With both handles in his left hand, the chain man throws out the chain with his right hand and the second chain man assists him to free it from knots (B) The follower of the chaining operation should be more experienced than the leader (C) At the end of the tenth chain length, the two chain men meet and the ten arrows are handed over to the leader (D) All the above

Description : Pick up the correct statement from the following: (A) With both handles in his left hand, the chain man throws out the chain with his right hand and the second chain man assists him to free it from ... the two chain men meet and the ten arrows are handed over to the leader (D) All the above

Last Answer : (D) All the above

Two hill tops and 20 km apart are intervened by a third top . If the top most contour of the three hill tops are of the same value, state whether the line of sight AB (A) Passes clear of hill top C (B) Passes below the hill top C(C) Grazes the hill top C(D) None of these

Description : Two hill tops and 20 km apart are intervened by a third top . If the top most contour of the three hill tops are of the same value, state whether the line of sight AB (A) Passes clear of hill top C (B) Passes below the hill top C (C) Grazes the hill top C (D) None of these

Last Answer : (B) Passes below the hill top C

Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) Measuring angles to the point from at least two stations (C) Measuring angle at one station and distance from other (D) Measuring distance from two points on traverse line

Description : Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) ... at one station and distance from other (D) Measuring distance from two points on traverse line

Last Answer : (B) Measuring angles to the point from at least two stations

The chaining on sloping ground is (A) Easier along the falling gradient (B) Easier along the up gradient (C) Equally convenient along falling as well as up gradient (D) All the above

Description : The chaining on sloping ground is (A) Easier along the falling gradient (B) Easier along the up gradient (C) Equally convenient along falling as well as up gradient (D) All the above

Last Answer : (A) Easier along the falling gradient

14. A siphon is used to connect two reservoirs at different levels intervened by a high ridge. A) True B) False

Description : 14. A siphon is used to connect two reservoirs at different levels intervened by a high ridge. A) True B) False

Last Answer : A

A strainer type well sunk through three previous layers intervened by three impervious aquicludes, draws water from (A) Top most pervious layer (B) Central pervious layer (C) Lowest pervious layer (D) All the pervious layer

Description : A strainer type well sunk through three previous layers intervened by three impervious aquicludes, draws water from (A) Top most pervious layer (B) Central pervious layer (C) Lowest pervious layer (D) All the pervious layer

Last Answer : (D) All the pervious layers

A boy presses a side of a blue pencil to a side of a yellow pencil, holding both pencils vertically. One inch of the pressed side of the blue pencil, measuring from its lower end, is smeared with paint. The yellow pencil is held steady while the boy slides the blue pencil down 1 inch, continueing to press it against the yellow one. He returns the blue pencil to its former position, then again it slides down 1 inch. He continues until he has lowered the blue pencil 5 times and raised it 5 times- 10 moves in all.Supposed that during this time the paint neither dries nor diminishes in quantity. How many inches of each pencil will be sneared with paint after the tenth move? -Riddles

Description : A boy presses a side of a blue pencil to a side of a yellow pencil, holding both pencils vertically. One inch of the pressed side of the blue pencil, measuring from its lower end, is smeared ... in quantity. How many inches of each pencil will be sneared with paint after the tenth move? -Riddles

Last Answer : At the start, 1inch of the yellow pencil gets smeared with wet paint. As the blue pencil is moved downward, a second inch of the blue pencils smears a second inch of the yellow pencil. Each pair ... of moves will smear 5 inches. This together with the initial inch, makes 6 inches for each pencil.

While measuring the distance between two points along upgrade with the help of a 20 m chain, the forward end of the chain is shifted forward through a distance (A) 20 (sin - 1) (B) 20 (cos - 1) (C) 20 (sec - 1) (D) 20 (cosec - 1)

Description : While measuring the distance between two points along upgrade with the help of a 20 m chain, the forward end of the chain is shifted forward through a distance (A) 20 (sin - 1) (B) 20 (cos - 1) (C) 20 (sec - 1) (D) 20 (cosec - 1)

Last Answer : (C) 20 (sec - 1)

A 20m chain was found to be 6cm too long after chaining a distance of 1059m. It was found to be 9cm too short after chaining at the end 1985m. If the chain was correct before commencement of work find the true distance.

Description : A 20m chain was found to be 6cm too long after chaining a distance of 1059m. It was found to be 9cm too short after chaining at the end 1985m. If the chain was correct before commencement of work find the true distance.

Last Answer : Given : Line ABC, AB=1059m, AC=1985m  L= 20m, No error at start, 0.06m too long at B,  0.09m too short  Find : True distance of AC = ? Solution : For part AB L = Length of chain= 20 m e = Average ... Total true distance of AC = True distance of (AB + BC)  = 1060.59 m + 922.52 m  = 1983.11 m

A 20 m chain was found to be 10 cm too short after chaining 1000 m It was found to be 20 cm too short after chaining 1800 m. If the chain was correct before commencement of the work find the true distance.

Description : A 20 m chain was found to be 10 cm too short after chaining 1000 m It was found to be 20 cm too short after chaining 1800 m. If the chain was correct before commencement of the work find the true distance.  

Last Answer : Average error in chain for 1000 m length = (0 + 10) / 2 = 5 cm = 0.05 m too short True length up to 1000 m = (20 - 0.05) x 1000 / 20 = 997.5 m. Average error in chain from 1000 m to 1800 m length = (10 ... 1800 m length = (20 - 0.15) x 800 / 20 = 794.0 m. True distance = 997.5 + 794 = 1791.5 m.

Describe method of measuring distances on ground using chain and arrows.

Description : Describe method of measuring distances on ground using chain and arrows.

Last Answer : Method of measuring distances on ground. 1. Mark the position of survey stations whose distance is to be measured using wooden peg. (say A and B) 2. now, ranging is done if distance ... station B. Thus total horizontal distance will be equal to addition of distances measured of each parts.

If the chain line which runs along N-S direction is horizontal and the ground in E-W direction is sloping (A) It is possible to set offsets correctly on east side (B) It is possible to set offsets correctly on east side (C) It is not possible to set offsets correctly on west side (D) It is possible to set offsets correctly on both sides

Description : If the chain line which runs along N-S direction is horizontal and the ground in E-W direction is sloping (A) It is possible to set offsets correctly on east side (B) It is possible to ... possible to set offsets correctly on west side (D) It is possible to set offsets correctly on both sides

Last Answer : (D) It is possible to set offsets correctly on both sides

Describe stepping method of chaining on sloping ground.

Description : Describe stepping method of chaining on sloping ground.

Last Answer : 1. If A and B are the two points on sloping ground, for which horizontal distance is to be measured. 2. Unfold the chain. By touching handle to station A, stretch it up to maximum possible ... 6. Thus total horizontal distance on sloping ground is calculated as d(AB) = L1+L2+L3 in meters.

Explain Direct method of chaining on sloping ground with neat skeetch.

Description : Explain Direct method of chaining on sloping ground with neat skeetch. 

Last Answer : While chaining on sloping ground, the horizontal distances can be computed by direct method i.e. By stepping. By stepping: It consist in measuring the distance in small horizontal lengths (e.g.L1). Let ... is continued in the correct line with point B. Then length of line AB=L1 +L2 +L3+L4

Explain with neat sketch method of stepping of chaining on sloping ground.

Description : Explain with neat sketch method of stepping of chaining on sloping ground.

Last Answer : Procedure : To measure the horizontal distance between points A & B on sloping ground following steps should be followed ( Refer above figure.) 1. Starting from point A, the chain is unfolded and ... . Finally calculate total chained distance as d(AB) = d(AP1) + d(P2P3) + d(P4P5)

Explain the process of chaining on sloping ground by stepping method with neat sketch.

Description : Explain the process of chaining on sloping ground by stepping method with neat sketch.

Last Answer : The procedure to measure horizontal distance between the points A and B on sloping ground is as follows. 1. Two persons-leader and follower are required for chaining. 2. The follower holds the end of chain at A. The leader goes ... between A and b L = AM, + MN' + NO' + OP' + PQ' + QB'

Describe in brief process of chaining on sloping ground.

Description : Describe in brief process of chaining on sloping ground.

Last Answer : In direct method which is also known as stepping method horizontal distance is directly measured as shown in fig. Horizontal distance between A and B is required to be measured. Procedure: i) A ... iii) The next step start from the C and the method is continued till point B reached. 

A male patient 30 years old with visual acuity of 6/6 in both eyes. Twelve hours ago he presented with drop of vision of the left eye. On examination, visual acuity was 6/6 in the right eye and 6/60 in the left eye. Fundus examination showed blurred edges of the left optic disc. The most probable diagnosis is: a. Raised intra cranial pressure b. Raised ocular tension c. Central retinal artery occlusion d. Optic neuritis

Description : A male patient 30 years old with visual acuity of 6/6 in both eyes. Twelve hours ago he presented with drop of vision of the left eye. On examination, visual acuity was 6/6 in the ... : a. Raised intra cranial pressure b. Raised ocular tension c. Central retinal artery occlusion d. Optic neuritis

Last Answer : ANSWER: D

What do you think would have happened had the United States not intervened in Europe in the two World Wars?

Description : What do you think would have happened had the United States not intervened in Europe in the two World Wars?

Last Answer : Two words: Soviet Union.

A composite beam is composed of two equal strips one of brass and other of steel. If the temperature is raised (A) Steel experiences tensile force (B) Brass experiences compressive force (C) Composite beam gets subjected to a couple (D) All the above

Description : A composite beam is composed of two equal strips one of brass and other of steel. If the  temperature is raised  (A) Steel experiences tensile force  (B) Brass experiences compressive force  (C) Composite beam gets subjected to a couple  (D) All the above

Last Answer : (D) All the above

What consideration would you have while selecting survey stations and survey lines in a chain survey?

Description : What consideration would you have while selecting survey stations and survey lines in a chain survey?

Last Answer : Following points to be considered while selecting survey stations and survey lines 1) Main survey station should be mutually visible. 2) All triangles should be well conditioned. 3) The survey line should lie ... of the area so as to form the frame work of triangles on it to cover maximum area. 

State any four precautions to be taken while selecting stations for chain surveying.

Description : State any four precautions to be taken while selecting stations for chain surveying.

Last Answer : Following are the precautions to be taken while selecting station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole to ... level ground. 9) The survey lines should run as far as possible nearer to object.

What does He has obstructed the Administration of Justice by refusing his Assent to laws for establishing judiciary powers mean?

Description : What does He has obstructed the Administration of Justice by refusing his Assent to laws for establishing judiciary powers mean?

Last Answer : It means that King George was making it difficult (or impossible ) to process court cases and administer justice by refusing to agree to local laws establishing courts. This charge pertains to a ... injured individuals to sue the injurer for redress, life, liberty, and property will be insecure.

Wounds are classified according to the likelihood of bacterial contamination. Which of the following statement(s) is/are true concerning wound classifications? a. A clean-contaminated wound would be that associated with an elective colon resection with adequate mechanical and antibiotic bowel preparation b. A contaminated wound would include a resection of obstructed bowel with gross spillage of intestinal contents c. In a clean wound, no viscus is entered d. Antibiotic prophylaxis should be administered for all clean-contaminated and contaminated wounds and selectively in patients involving a clean wound

Description : Wounds are classified according to the likelihood of bacterial contamination. Which of the following statement(s) is/are true concerning wound classifications? a. A clean-contaminated wound would ... all clean-contaminated and contaminated wounds and selectively in patients involving a clean wound

Last Answer : Answer: a, b, c, d Wounds are classified under three classes according to the likelihood of bacterial contamination: 1) clean (no viscus is entered; e.g., herniorrhaphy); 2) clean- ... tenet involves cases in which a prosthetic material may be used (artificial joint, heart valve, tissue patch)

The presence of air bubble in blood stream is dangerous to life because- (1) Air combines with blood forming a complex (2) The flow of blood increases manifold (3) The flow of blood is obstructed (4) The pressure of blood increases manifold

Description : The presence of air bubble in blood stream is dangerous to life because- (1) Air combines with blood forming a complex (2) The flow of blood increases manifold (3) The flow of blood is obstructed (4) The pressure of blood increases manifold

Last Answer : (3) The flow of blood is obstructed Explanation: The presence of air bubble in blood, known as air embolism occludes blood vessels. The flow of blood is obstructed causing strokes, heart attacks, ... blood from reaching the target organ and cause ischemia. It can lead to heart attack and death.

Cathode rays when obstructed by metal cause emission of - (1) γ – ray (2) X – ray (3) α – ray (4) β – ray

Description : Cathode rays when obstructed by metal cause emission of - (1) γ – ray (2) X – ray (3) α – ray (4) β – ray

Last Answer : B. X – ray

The presence of air bubble in blood stream is dangerous to life because (1) Air combines with blood forming a complex (2) The flow of blood increases manifold (3) The flow of blood is obstructed (4) The pressure of blood increases manifold

Description : The presence of air bubble in blood stream is dangerous to life because (1) Air combines with blood forming a complex (2) The flow of blood increases manifold (3) The flow of blood is obstructed (4) The pressure of blood increases manifold

Last Answer : The flow of blood is obstructed

Polymyalgia rheumatica associated with 1) raised creatinine kinase 2) increased alkaline phosphotase 3) sudden loss of vision in one eye 4) shoulder and pelvic girdle pain in 40 year old man 5) erythema nodosum

Description : Polymyalgia rheumatica associated with 1) raised creatinine kinase 2) increased alkaline phosphotase 3) sudden loss of vision in one eye 4) shoulder and pelvic girdle pain in 40 year old man 5) erythema nodosum

Last Answer : Answers-2 Liver enzymes elevated in most patients. Visual disturbances suggestive of temporal arteritis, due to ischaemic changes in ciliary arteries (optic neuritis/infarction) and less commonly due to central artery occlusion. Raised CK in polymyositis. PMR is rare before the age of 50 years.

The distance between steps for measuring downhill to obtain better accuracy (A) Decreases with decrease of slope (B) Increases with increase of slope (C) Decreases with increase of slope (D) Decreases with decrease of weight of the chain

Description : The distance between steps for measuring downhill to obtain better accuracy (A) Decreases with decrease of slope (B) Increases with increase of slope (C) Decreases with increase of slope (D) Decreases with decrease of weight of the chain

Last Answer : (C) Decreases with increase of slope

Measuring with a 30 m chain, 0.01 m too short, introduces (A) Positive compensating error (B) Negative compensating error (C) Positive cumulative error (D) Negative cumulative error

Description : Measuring with a 30 m chain, 0.01 m too short, introduces (A) Positive compensating error (B) Negative compensating error (C) Positive cumulative error (D) Negative cumulative error

Last Answer : (C) Positive cumulative error

A standard steel tape of length 30 m and cross-section 15 × 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 × 106 kg/cm2 , the correction to be applied is (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Description : A standard steel tape of length 30 m and cross-section 15 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of ... (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Last Answer : (A) - 0.000909 m

Due to perturbation of the orbit, satellite orbit parameters are frequently updated on measurements carried out by its (A) Six ground stations (B) Five ground stations (C) Four ground stations (D) Three ground stations

Description : Due to perturbation of the orbit, satellite orbit parameters are frequently updated on measurements carried out by its (A) Six ground stations (B) Five ground stations (C) Four ground stations (D) Three ground stations

Last Answer : Answer: Option B

Greater accuracy in linear measurements, is obtained by (A) Tacheometry (B) Direct chaining (C) Direct taping (D) All the above

Description : Greater accuracy in linear measurements, is obtained by (A) Tacheometry (B) Direct chaining (C) Direct taping (D) All the above

Last Answer : (C) Direct taping

The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Description : The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Last Answer : (B) Telescopic alidade

The depth of the ground water table may be ascertained by (A) Looking through the well in the vicinity (B) Standing on the well in the vicinity (C) Measuring the depth of water in the well (D) None of the abov

Description : The depth of the ground water table may be ascertained by (A) Looking through the well in the vicinity (B) Standing on the well in the vicinity (C) Measuring the depth of water in the well (D) None of the abov

Last Answer : Answer: Option C

What is the metaphor in again the spector raised a cryand shook his chain and wrung his shadowy hand?

Description : What is the metaphor in again the spector raised a cryand shook his chain and wrung his shadowy hand?

Last Answer : It is doomed to wander through the world -- oh, woe is me! -- and witness what it cannot share, but might have shared on earth, and turned to happiness!' Again the spectre raised a cry, and shook its chain and wrung its shadowy hands. `You are fettered,' said Scrooge, trembling.

While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection should be obtained by actually drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Description : While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection ... drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Last Answer : (B) Draw short rays sufficient to contain the points sought

Which problem can frequently occur in backward chaining algorithm? a) Repeated states b) Incompleteness c) Complexity d) Both Repeated states & Incompleteness

Description : Which problem can frequently occur in backward chaining algorithm? a) Repeated states b) Incompleteness c) Complexity d) Both Repeated states & Incompleteness

Last Answer : d) Both Repeated states & Incompleteness

It's common knowledge that 20/20 vision is as good as it gets. But where does this phrase originate?

Description : It's common knowledge that 20/20 vision is as good as it gets. But where does this phrase originate?

Last Answer : answer:20/20 vision 20/40 is worse than 20/20/

Water gets evaporated from water surfaces and land surfaces, get converted into water drops at lower temperatures, flows over ground surface and finally meets its source, i.e. lake, sea, etc. This entire process is generally known as (A) Hydrological cycle (B) Water cycle (C) Evaporation and precipitation cycle (D) All the above

Description : Water gets evaporated from water surfaces and land surfaces, get converted into water drops at lower temperatures, flows over ground surface and finally meets its source, i.e. lake, sea, etc. This ... Hydrological cycle (B) Water cycle (C) Evaporation and precipitation cycle (D) All the above

Last Answer : (D) All the above

During percussion drilling (A) Ground water observations are hindered due to entry of the slurry in the soil below the bottom of the hole (B) Caving or mixing of strata are caused in soft soils or cohesionless soils (C) The soil to a considerable depth below the bottom of the hole gets disturbed (D) All the above

Description : During percussion drilling (A) Ground water observations are hindered due to entry of the slurry in the soil below the bottom of the hole (B) Caving or mixing of strata are caused in soft soils or ... The soil to a considerable depth below the bottom of the hole gets disturbed (D) All the above

Last Answer : Answer: Option D

Is diesel fuel sold at all national chain gas stations?

Description : Is diesel fuel sold at all national chain gas stations?

Last Answer : Diesel is a very widely used form of fuel. It it almost certain that basically every gas station you pass by will have diesel fuel. Also, Diesel is very clean and efficient.

Littoral drift (A) Is the raised line of sand, parallel to the sea coast (B) Is the slow movement of surface water at sea caused by the wind (C) Is a current parallel to the shore, caused due to tangential component of the wind (D) Is a current perpendicular to the shore line caused due to wind

Description : Littoral drift (A) Is the raised line of sand, parallel to the sea coast (B) Is the slow movement of surface water at sea caused by the wind (C) Is a current parallel to the shore, caused due to tangential component of the wind (D) Is a current perpendicular to the shore line caused due to wind

Last Answer : (C) Is a current parallel to the shore, caused due to tangential component of the wind

Chain surveying is well adopted for (A) Small areas in open ground (B) Small areas with crowded details (C) Large areas with simple details (D) Large areas with difficult details

Description : Chain surveying is well adopted for (A) Small areas in open ground (B) Small areas with crowded details (C) Large areas with simple details (D) Large areas with difficult details

Last Answer : (A) Small areas in open ground

To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab in line with AB. A ray is then drawn towards and at the table is oriented by back ray method. The orientation so obtained, is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Last Answer : (C) Manifold and correct

The difference of levels between two stations A and B is to be determined. For best results, the instrument station should be (A) Equidistant from A and B (B) Closer to the higher station (C) Closer to the lower station (D) As far as possible from the line AB

Description : The difference of levels between two stations A and B is to be determined. For best results, the instrument station should be (A) Equidistant from A and B (B) Closer to the higher station (C) Closer to the lower station (D) As far as possible from the line AB

Last Answer : (A) Equidistant from A and B

A bird perches on a bare high power line and nothing happens to it. A man standing on the ground touches the same line and gets a fatal shock. Why?

Description : A bird perches on a bare high power line and nothing happens to it. A man standing on the ground touches the same line and gets a fatal shock. Why?

Last Answer : Ans: When bird perches on a live high power line, no current passes through the body of bird because there is no potential difference between live wire and the body of bird as the potential of ... potential difference between his hands and feet, a large current flows through his body to the earth.

While measuring with a metallic tape of 30 m length pull should be applied (A) 1 kg (B) 2 kg (C) 3 kg (D) 4 kg

Description : While measuring with a metallic tape of 30 m length pull should be applied  (A) 1 kg  (B) 2 kg  (C) 3 kg  (D) 4 kg 

Last Answer : (C) 3 kg