List out the different technical losses that takes place in Transmission and Distribution system.

List out the different technical losses that takes place in Transmission and Distribution system.

by

1 Answer

Answer :

Different technical losses that takes place in Transmission and Distribution system:

1) Losses due to random growth of sub transmission &distribution system. planned growth/expansion maintains the losses to optimum values as the system conductors and other components are judiciously selected. 2) Losses due to large scale rural electrification through long 11KV & LT lines unbalanced loading 3) Losses due to many stages of transformation. (Large no. of transformers). 4) Un balance loading on three phases 5) Losses due to unsatisfactory reactive power compensation. 6) Losses due to poor quality of equipment used. 

by

Related questions

Explain how technical losses can be reduced by use of energy efficient transformer in Transmission and Distribution system.

Description : Explain how technical losses can be reduced by use of energy efficient transformer in Transmission and Distribution system.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

With neat diagram explain use of “reactive power controller” to reduce technical losses in transmission and distribution system.

Description : With neat diagram explain use of “reactive power controller” to reduce technical losses in transmission and distribution system.

Last Answer : Reactive power compensation in Transmission and Distribution systems: The reactive power is present in lines due to the reactive loads and device/ component reactance. This leads to heavy currents for active ... switched to the line as per the requirement of lagging or leading reactive VA. 

Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Description : Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Last Answer : (i) Balancing Phase currents: Proper (healthy balanced) three phase loads always draw equal currents in all lines but single phase loads in the 3 phase 4 wire system or loads connected between two ... . 11) Minimize I2R losses. 12) Balance the load currents. 13) Regulate the system voltages.

State and explain any four technical losses in transmission and distribution systems.

Last Answer : Technical losses: i) Copper losses ii) Unbalance loading iii) Long length of distribution lines iv) Conductor of inadequate size v) Various losses in transformer vi) Long distance between transformer and ... be the season behind this which is due to less interest of the line men in their work.

State and explain any four commercial losses in transmission and distribution system.

Description : State and explain any four commercial losses in transmission and distribution system.

Last Answer : Skin effects Carvana effect  Core loss  Over current 

Explain scenario of transmission and distribution losses at national level.

Description : Explain scenario of transmission and distribution losses at national level.

Last Answer : Scenario of transmission and distribution losses at national level: i) T & D losses in India are the highest in the world. Inadequate investment in T&D network is one of the main reasons ... . According to planning commission report, the target is to minimize these losses to 18% upto 2018.

State commercial losses in transmission and distribution systems. Also state the remedies for the same.

Description : State commercial losses in transmission and distribution systems. Also state the remedies for the same.

Last Answer : Following are the commercial losses in Transmission Distribution systems: 1) Make unauthorized extension of loads. ( Direct Hooking) 2) Errors in meter reading & recording (faulty meter). 3) By ... turn reduces the energy requirements by some scale in turn leading to saving in energy sources.

State the losses in secondary distribution system.

Description : State the losses in secondary distribution system. 

Last Answer : The losses in secondary distribution system: a) Technical losses: 1. Due to poor voltage 2. Due to unbalance load 3. Due poor quality of transformer & its components 4. Due to poor quality ... of induction type of energy meter. 3. Lack of administration. 4. Energy theft 5. Unmetered supply

Explain the following energy conservation techniques: (i) By reducing I2R losses in Trans. system (ii) By optimizing distribution voltage.

Description : Explain the following energy conservation techniques: (i) By reducing I2R losses in Trans. system (ii) By optimizing distribution voltage.

Last Answer : i) By reducing I2R losses in Trans:  1. Opting for low resistance All Aluminum Alloy conductors (AAAC) in place of conventional aluminum cored steel reinforced (ACSR) lines. 2. ... line power losses. Thus maintaining the voltages at the specified levels leads to energy savings/conservation.

State the working principle and operation of Automatic power factor controller used in Transmission and Distribution system.

Description : State the working principle and operation of Automatic power factor controller used in Transmission and Distribution system.

Last Answer : Diagram of Automatic over factor controller Automatic Power factor control: The pf controller is used to maintain the pf at unity across the lines it is connected. Maintaining the pf at ... the load demand in the system is increased. 8. Check if power transformer compensation is provided.

List out energy conservation techniques to be adopted to reduce losses in the induction motor.

Description : List out energy conservation techniques to be adopted to reduce losses in the induction motor.

Last Answer : Following are the list of energy conservation techniques in electrical motors:  1) Reduction in iron losses by using low loss silicon steel core material laminated to thinner dimension. 2) Using bigger ... balancing. 11) By improving power quality. 12) Operating motor in star mode at light load.

Explain reactive power compensation in Transmission and Distribution systems.

Description : Explain reactive power compensation in Transmission and Distribution systems.

Last Answer : Reactive power compensation in Transmission and Distribution systems: The reactive power is present in lines due to the reactive loads and device/ component reactances. This leads to heavy ... Diagram shows a scheme of reactive power compensation used in transmission and distribution systems. 

Explain the “mitigation of power theft” and “faulty meter replacement” for energy conservation techniques to reduce commercial losses.

Description : Explain the “mitigation of power theft” and “faulty meter replacement” for energy conservation techniques to reduce commercial losses. 

Last Answer : Energy conservation techniques to reduce commercial losses:  1. Mitigation of Power Theft: Power theft being the most important issue which all of the service providing utilities ... agricultural sector. Prepaid meters may prove effective measures against unauthorized abstraction of energy. 

What are technical system losses ?

Description : What are technical system losses ?

Last Answer : Waste due to transportation, waste due to equipment, waste due to own use of power plant.

Explain energy conservation technique in induction motor by improving mechanical power and transmission efficiency.

Description : Explain energy conservation technique in induction motor by improving mechanical power and transmission efficiency.

Last Answer : Energy Conservation Technique in Induction Motor: To improve the mechanical power and transmission efficiency, proper selection of belt drives and gear drives suitable for particular application is ... . Energy conservation is achieved by using more efficient gears for particular applications. 

List the different types of tariff.

Description : List the different types of tariff.

Last Answer : Various types of Tariff:-  1) Flat-demand Tariff  2) Simple-demand Tariff or Uniform Tariff  3) Flat-rate Tariff  4) Step-rate Tariff  5) Block-rate Tariff  6) Two-part Tariff  7) Maximum demand Tariff ... c) KW and KVAR Tariff 10) TOD (Time of Day) Tariff 11) TOU ( Time of Usage) Tariff

List out the energy conservation equipments related to • Lighting system • Induction motor

Description : List out the energy conservation equipments related to • Lighting system • Induction motor

Last Answer : Energy conservation equipments related to:  1. Lighting System:  1. Luxmeter 2. Power Analyzer 3. Voltage Stabilizer 4. Electronic Ballast 5. LED Lamp 6. Control gear or Regulators 7. ... 2. Power Analyzer 3. Digital Voltmeter 4. Digital Ammeter 5. Wattmeter 6. Different types of starter

List out the energy conservation techniques in Fans.

Description : List out the energy conservation techniques in Fans.

Last Answer : Following are energy conservation techniques in Fans : Use the electronic regulators instead of conventional regulator. The fan used at low speed instead of high speed. Adjust the direction of the ceiling ... Day / 1000 = Daily Kilowatt-hour (kWh) Consumption (1 kilowatt [kw] = 1000 watts)

List out the factors to be considered to select electrical drives for an application.

Description : List out the factors to be considered to select electrical drives for an application.

Last Answer : Following are the factors to be considered to select electrical drives for an application:  1) Load torque required at normal speed matches with available torque of motor. 2) Break down torque ... selecting an energy efficient motor the cost benefit analysis over the long run must be worked out.

List the energy conservation technique in induction motor.

Description : List the energy conservation technique in induction motor. 

Last Answer : Following are the list of energy conservation techniques in electrical motors: 1) Reduction in iron losses by using low loss silicon steel core material laminated to thinner dimension. 2) Using bigger length ... at light load. 13) By rewinding in induction motor 14) By motor survey

List functions of MEDA.

Description : List  functions of MEDA. 

Last Answer : Functions of MEDA:  1. To decide long term energy conservation policy's for Maharashtra state. 2. To coordinate with central government organization i.e NPC, MNRE etc for energy conservation policy ... our society. 6. To decide penalty, incentive, subsidy for energy conservation at state level. 

Petroff’s equation is used to find out (A) Load carrying capacity of the bearing (B) Frictional losses in the bearing (C) Unit bearing pressure on the bearing (D) Pressure distribution around the periphery of the journal

Description : Petroff’s equation is used to find out (A) Load carrying capacity of the bearing (B) Frictional losses in the bearing (C) Unit bearing pressure on the bearing (D) Pressure distribution around the periphery of the journal

Last Answer : (B) Frictional losses in the bearing

Line losses in a distribution circuit are kept to a minimum by __________. A. adding rubber insulation conductors to the circuit B. using higher current and lower voltage C. increasing the number of thermal relays in the circuit D. using higher voltage and lower current

Description : Line losses in a distribution circuit are kept to a minimum by __________. A. adding rubber insulation conductors to the circuit B. using higher current and lower voltage C. increasing the number of thermal relays in the circuit D. using higher voltage and lower current

Last Answer : Answer: D

Premium on issue of shares can be used for -----------. A. distribution of dividend B. writing of f capital losses C. transferring to general reserve D. paying fees to directors

Description : Premium on issue of shares can be used for -----------. A. distribution of dividend B. writing of f capital losses C. transferring to general reserve D. paying fees to directors

Last Answer : B. writing of

Distribution transformers have core losses:

Description : Distribution transformers have core losses:  (1) More than full load copper losses (2) Equal to full load copper losses (3) Less than full load copper losses (4) W Negligible compared to full load copper losses

Last Answer : Distribution transformers have core losses:  Less than full load copper losses.

Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Description : Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Last Answer : A. Transmission system engineering

The Centre-State financial distribution takes place on the recommendation by which ministry? -Do You Know?

Description : The Centre-State financial distribution takes place on the recommendation by which ministry? -Do You Know?

Last Answer : answer:

The Centre-State financial distribution takes place on the recommendation by which ministry? -Do You Know?

Description : The Centre-State financial distribution takes place on the recommendation by which ministry? -Do You Know?

Last Answer : answer:

Financial distribution between the Union and the State takes place on the basis of the recommendations of which one of the following? (1) The National Development Council (2) The Inter-State Council (3) The Planning Commission (4) The Finance Commission

Description : Financial distribution between the Union and the State takes place on the basis of the recommendations of which one of the following? (1) The National Development Council (2) The Inter-State Council (3) The Planning Commission (4) The Finance Commission

Last Answer : (4) The Finance Commission Explanation: The Finance Commission is constituted by the President under article 280 of the Constitution, mainly to give its recommendations on distribution of tax revenues between the Union and the States and amongst the States themselves.

The Centre-State financial distribution takes place on the recommendation by which ministry?

Description : The Centre-State financial distribution takes place on the recommendation by which ministry?

Last Answer : Finance Minister

_______ takes place when at least one party to a potential exchange thinks about the means of achieving desired responses from other parties. A. Marketing management B. Forecasting C. Segmentation D. Targeting E. Distribution

Description : _______ takes place when at least one party to a potential exchange thinks about the means of achieving desired responses from other parties. A. Marketing management B. Forecasting C. Segmentation D. Targeting E. Distribution

Last Answer : A. Marketing management

1. Which is used extensively for genetic engineering in plant? 2. The Centre-State financial distribution takes place on the recommendation by which ministry? 3. At the time of short-circuit, what will be the current in the circuit? 4. Which country is the biggest producer of mango? 5. What was the capital of Kakatiya dynasty?

Description : 1. Which is used extensively for genetic engineering in plant? 2. The Centre-State financial distribution takes place on the recommendation by which ministry? 3. At the time of short-circuit, what ... first in producing teak? 20. By whom was the agitation against the partition of Bengal led?

Last Answer : Answer : 1 1. Agrobacterium tumefaciens 2. Finance Minister 3. Increases heavily 4. India 5. Warangal 6. Bentham 7. September 8 8. RNA 9. Eyre 10. M. G. Ranade 11. Attorney General 12. ... Mission 16. October 8 17. Salinity 18. Government of India Act, 1935 19. Thailand 20. Surendranath Banerjee

A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Description : A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Last Answer : Ans: 0.04, 1160 W

What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna compared to the output power of the transmitter C. The ratio of the signal in the backward direction D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

What are the three types of line losses associated with transmission lines?

Description : What are the three types of line losses associated with transmission lines?

Last Answer : Copper, dielectric, and radiation.

State and explain the losses in transmission line.

Description : State and explain the losses in transmission line.

Last Answer : Losses in Transmission Line:- There are three ways in which energy, applied to a transmission may desperate before reaching the load. They are 1) Radiation Losses:- Its occurs when a ... down voltage of the dielectric insulator. Generally when corona occurs, the transmission line is destroyed.

For a transmission line with negligible losses, the lagging reactive power...

Description : For a transmission line with negligible losses, the lagging reactive power (VAR) delivered at The receiving end, for a given receiving end voltage, is directly proportional to the?

Last Answer : For a transmission line with negligible losses, the lagging reactive power (VAR) delivered at The receiving end, for a given receiving end voltage, is directly proportional to the line voltage drop.

State the different types of tariffs. Explain any one.

Description : State the different types of tariffs. Explain any one.

Last Answer : Different types of tariffs: i) Simple tariff ii) Flat rate tariff iii) Block rate tariff iv) Two part tariff v) Maximum demand tariff vi) Power factor tariff vii) Three part tariff viii) Time- ... the rates are low. So that the consumers are encouraged to use the electricity during non-peak hours.

Why two thin shirts can keep us warmer than a single thick shirt in winter ? (1) Two thin shirts become thicker so prevent transmission of heat (2) Air layer between two shirts works as good conductor (3) Air layer between two shirts behaves like insulating media (4) No radiation of heat takes place

Description : Why two thin shirts can keep us warmer than a single thick shirt in winter ? (1) Two thin shirts become thicker so prevent transmission of heat (2) Air layer between two shirts works as good conductor (3) Air layer between two shirts behaves like insulating media (4) No radiation of heat takes place

Last Answer : Air layer between two shirts behaves like insulating media

Order processing A)is the receipt and transmission of sales order information. B)is the second stage in a physical distribution system. C)involves four main tasks. D)is the same as order handling. E)is characterised by electronic processing.

Description : Order processing A)is the receipt and transmission of sales order information. B)is the second stage in a physical distribution system. C)involves four main tasks. D)is the same as order handling. E)is characterised by electronic processing.

Last Answer : A)is the receipt and transmission of sales order information.

A 3-phase 4 wire system is commonly used on (a) primary transmission (b) secondary transmission (c) primary distribution (d) secondary distribution

Description : A 3-phase 4 wire system is commonly used on (a) primary transmission (b) secondary transmission (c) primary distribution (d) secondary distribution

Last Answer : (d) secondary distribution

The permissible voltage variation in transmission and distribution system is:

Description : The permissible voltage variation in transmission and distribution system is:  (A) ± 0.1% (B) ± 1% (C) ±10% (D) ± 25%

Last Answer : The permissible voltage variation in transmission and distribution system is: ±10%

State and explain the factors that govern the selection of cogeneration system for an industry.

Description : State and explain the factors that govern the selection of cogeneration system for an industry.

Last Answer : The factors that govern the selection of cogeneration system for an industry: The factors that govern the selection of cogeneration systems are very much site/situation specific. The local factors ... require is generated. If required energy demand is higher electricity purchased from grid. 

State the advantages of adoption of cogeneration system in an industry.

Description : State the advantages of adoption of cogeneration system in an industry.

Last Answer : The advantages of adoption of cogeneration system in an industry: 1) Co-generation can meet both power & heat needs. 2) Less costly. 3) Very high efficiency. 4) Reduction in ... . 8) Due to decentralization of electricity it avoids transmission losses & makes system more efficient.

With example explain how the replacement of lamps in lighting system contributes for energy conservation?

Description : With example explain how the replacement of lamps in lighting system contributes for energy conservation?

Last Answer : Replacement of lamps in lighting system contributes for energy conservation: i. Replacing incandescent lamps by Compact Fluorescent Lamps (CFL's) ii. Replacing conventional fluorescent lamp by energy efficient fluorescent ... lights in place of all other lamps above as feasible (in terms of cost) 

Explain the role of adequate maintenance of lighting system in energy conservation.

Description : Explain the role of adequate maintenance of lighting system in energy conservation.

Last Answer : Role of adequate maintenance of lighting system in energy conservation: Illumination level reduces due to accumulation of dirt on lamps and luminaries. Further as the lamps get older their ... should be conducted to take advantage of energy conservation opportunities as user requirements change.

Write any four merits of co-generation system.

Description : Write any four merits of co-generation system.

Last Answer : Merits of co-generation system: 1) Co-generation can meet both power & heat needs. 2) Less cost than conventional generation. 3) Higher system efficiency as energy wastage is ... Due to decentralization of electricity supply it avoids transmission losses & makes system more flexible.

With a neat diagram, explain gas engine co-generation system.

Description : With a neat diagram, explain gas engine co-generation system.

Last Answer : Gas engine co-generation system:  Spark Ignition Gas Engine: These engines have shaft efficiency near about 35% but low capital cost/kW comparing to compression idnition engine. Temperature rangr ... ignition engines require complex cooling system as compared to spark ignition gas engine.

With a neat diagram, explain back pressure steam turbine co-generation system.

Description : With a neat diagram, explain back pressure steam turbine co-generation system.

Last Answer : Back pressure steam turbine co-generation system: In this type steam enters the turbine chamber at High Pressure and expands to Low or Medium Pressure. Enthalpy difference is used for generating power / work. ... , the overall thermal efficiency of the system could reach as much as 90 percent.

With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Description : With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Last Answer : (i) Steam turbine co-generation system: The two types of steam turbines most widely used are the backpressure and the extraction. Another variation of the steam turbine topping ... power. The exhaust or the extracted steam from the steam turbine provides the required thermal energy.