State the advantages of adoption of cogeneration system in an industry.

State the advantages of adoption of cogeneration system in an industry.
by

1 Answer

Answer :

The advantages of adoption of cogeneration system in an industry: 1) Co-generation can meet both power & heat needs. 2) Less costly. 3) Very high efficiency. 4) Reduction in emission of pollutants due to reduced fuel consumption. 5) A much more efficient use of primary energy can be achieved than with a separate production of electricity & heat. 6) In this system heat generated is by-product in electricity generating process. 7) It can maintain grid stability. 8) Due to decentralization of electricity it avoids transmission losses & makes system more efficient.

by

Related questions

State and explain the factors that govern the selection of cogeneration system for an industry.

Description : State and explain the factors that govern the selection of cogeneration system for an industry.

Last Answer : The factors that govern the selection of cogeneration system for an industry: The factors that govern the selection of cogeneration systems are very much site/situation specific. The local factors ... require is generated. If required energy demand is higher electricity purchased from grid. 

State the advantages of cogeneration.

Description : State the advantages of cogeneration. 

Last Answer : Advantages of co-generation: 1) Co-generation can meet both power & heat requirements. 2) Less cost than conventional generation. 3) Higher system efficiency due to energy wastage is highly ... reduces due to cogeneration plant is located in same premises. 10) It can maintain grid stability 

State the need of cogeneration in present scenario.

Description : State the need of cogeneration in present scenario.

Last Answer : Need for co-generation in present scenario: 1. In conventional power plant efficiency is only 35% & remaining 65% of energy is lost. 2. The conventional system uses energy of fuel ... economical solution to energy shortages. 4. Increases financial capital. 5. Increases environmental value. 

State the factor governing the selection of cogeneration system. write advantages of cogeneration.

Description : State the factor governing the selection of cogeneration system. write advantages of cogeneration.

Last Answer : Factor governing the selection of cogeneration system: 1) electrical load matching 2) thermal load matching 3) Electrical load matching 4) Thermal load matching 5)Thermal to electrical energy ratio ... Very high efficiency. 4) Reduction in emission of pollutants due to reduced fuel consumption. 

Write factors used for governing the selection of cogeneration system and state the advantages of cogeneration.

Description : Write factors used for governing the selection of cogeneration system and state the advantages of cogeneration.

Last Answer : Factor governing the selection of cogeneration system: 1) electrical load matching 2) thermal load matching 3) Electrical load matching 4) Thermal load matching 5)Thermal to electrical energy ... ) Very high efficiency. 4) Reduction in emission of pollutants due to reduced fuel consumption.

State advantages of electronic ballast compare to electrical ballast.

Description : State advantages of electronic ballast compare to electrical ballast.

Last Answer : advantages of electronic ballast compare to electrical ballast: 1. Instant light 2. Lighter in weight 3. power saving is up to 35% 4. Heat output is negligible, that reduces load on air conditioning. 5. Improved power factor 6. Operates at low voltage 7. Enhances life of lamp

State any four advantages of soft starter.

Description : State any four advantages of soft starter.

Last Answer : Advantages of soft starter: 1. Very low line voltage drops on motor operation 2. Reduced energy losses in the lines 3. System efficiency increases 4. Very smooth starting & operation 5. As ... may lead to lower MD billing. 13. Less mechanical maintenance. 14. Saving in operating costs.

The waste heat recovery unit (WHRU) is a tool involved in _______. a) Regeneration b) Cogeneration c) Both ‘a’ and ‘b’ d) None of the above

Description : The waste heat recovery unit (WHRU) is a tool involved in _______. a) Regeneration b) Cogeneration c) Both ‘a’ and ‘b’ d) None of the above

Last Answer : Cogeneration

Explain any four advantages of amorphous transformer.

Description : Explain any four advantages of amorphous transformer.

Last Answer : Advantages of amorphous core transformer: 1) Lowest hysteresis loss. 2) Low eddy current loss. 3) Low temperature rise. 4) Up to 75% energy saving using amorphous metal than conventional metal. 5 ... capacity. 9) High Reliability. 10) Excellent short circuit capacity. 11) Less maintenance cost. 

State the losses in secondary distribution system.

Description : State the losses in secondary distribution system. 

Last Answer : The losses in secondary distribution system: a) Technical losses: 1. Due to poor voltage 2. Due to unbalance load 3. Due poor quality of transformer & its components 4. Due to poor quality ... of induction type of energy meter. 3. Lack of administration. 4. Energy theft 5. Unmetered supply

State the working principle and operation of Automatic power factor controller used in Transmission and Distribution system.

Description : State the working principle and operation of Automatic power factor controller used in Transmission and Distribution system.

Last Answer : Diagram of Automatic over factor controller Automatic Power factor control: The pf controller is used to maintain the pf at unity across the lines it is connected. Maintaining the pf at ... the load demand in the system is increased. 8. Check if power transformer compensation is provided.

State and explain any four commercial losses in transmission and distribution system.

Description : State and explain any four commercial losses in transmission and distribution system.

Last Answer : Skin effects Carvana effect  Core loss  Over current 

State the needs and benefits of star labelling.

Description : State the needs and benefits of star labelling. 

Last Answer : Needs of star labelling: * Star labelling is meanly required to recognize quality of product * Star labelling is also required to determine life and efficiency of the product. * Star labels ... emission and air pollution will be reduces. 5. Market efficiency and compilation will be improve. 

State the difference between energy conservation and energy audit.

Description : State the difference between energy conservation and energy audit. 

Last Answer : energy conservation Energy audit It is reducing the growth of energy consumption by avoiding unnecessary usage of energy It is an inspection, survey & analysis of energy flows ... Various measuring instruments, with proper sensing elements are required for the energy audit. 

State and explain the desirable characteristics of a Tariff.

Description : State and explain the desirable characteristics of a Tariff. 

Last Answer : The desirable characteristics of a Tariff: 1. It should be easy to understand to consumer. 2. Easy to calculate. 3. Tariff should be attractive i.e. It should not be too high or ... industrial consumer, in addition to basic tariff incentives and penalty related to PF and LF should be considered.

State and explain "power factor tariff'.

Description : State and explain "power factor tariff'.

Last Answer : Power Factor Tariff:- In addition to basic tariff (Maximum Demand Tariff / KVA Maximum Demand Tariff / Load factor tariff) the tariff in which P.F. of industrial consumer is taken into consideration. ... consumer/H.T/ commercial consumers with contract demand above 80 kw/ 100Kva/107 hp consumer.

State how 'parallel operation of transformers' helps in energy conservation.

Description : State how 'parallel operation of transformers' helps in energy conservation.

Last Answer : 'Parallel operation of transformers' helps in energy conservation: The transformers operate near their maximum efficiency at around 70 % to 100 % of their rated loads. For a huge load system drawing highly ... if of higher rating may be put in service while the first one may be switched off.

State the significant features of Energy Efficient Motor.

Description : State the significant features of Energy Efficient Motor.

Last Answer : Significant features of Energy Efficient Motor: 1. Material used is of high quality. ( High flux density & High current density) 2. Due to high quality material luminous used are ... Less (negligible) maintenance. 7. Operating temperature with standing capacity is more without any problem.

State the different types of tariffs. Explain any one.

Description : State the different types of tariffs. Explain any one.

Last Answer : Different types of tariffs: i) Simple tariff ii) Flat rate tariff iii) Block rate tariff iv) Two part tariff v) Maximum demand tariff vi) Power factor tariff vii) Three part tariff viii) Time- ... the rates are low. So that the consumers are encouraged to use the electricity during non-peak hours.

State two benefits and applications of variable frequency drives.

Description : State two benefits and applications of variable frequency drives. 

Last Answer : Benefits and applications of variable frequency drives: The variable frequency drive helps to conserve electrical energy and gives the following benefits: 1) Energy saving due to optimum use for applications ... 4) Process control drives. 5) Textile industry machines. 6) Paper industry machines. 

State the opportunities for energy conservation techniques in transformers.

Description : State the opportunities for energy conservation techniques in transformers.

Last Answer : Opportunities for energy conservation techniques in transformers: Most of the energy loss that occurs in transformer is due to heat or vibration in the core that also reduces life of ... 9. Use better quality insulation materials to improve overload capacity and decrease dielectric leakages. 

State commercial losses in transmission and distribution systems. Also state the remedies for the same.

Description : State commercial losses in transmission and distribution systems. Also state the remedies for the same.

Last Answer : Following are the commercial losses in Transmission Distribution systems: 1) Make unauthorized extension of loads. ( Direct Hooking) 2) Errors in meter reading & recording (faulty meter). 3) By ... turn reduces the energy requirements by some scale in turn leading to saving in energy sources.

State salient features of Energy conservation Act-2003

Description : State salient features of Energy conservation Act-2003

Last Answer : Salient features of Energy Conservation Act-2003: i) The Central Government to prepare a National Electricity Policy in consultation with State Governments. ii) Thrust to complete the rural ... to undertake generation and generating companies would be free to take up distribution businesses.

State ABC analysis related to energy audit.

Description : State ABC analysis related to energy audit.

Last Answer : ABC analysis related to energy audit: ABC analysis provides a mechanism for identifying different categories of activities/stocks/items that will require different management and controls. i) A ... management technique which helps energy audit process to achieve the goal of energy audit. 

What is energy flow diagram? State its significance from Energy Audit point of view.

Description : What is energy flow diagram? State its significance from Energy Audit point of view.

Last Answer : Example energy flow diagram: Significance of energy flow diagram: 1. Energy flow diagram, also known as Sankey diagram, is a specific type of flow diagram in which the width of the arrow is ... from left of the diagram. The outputs (useful and leakages/losses of energy) are shown in diagram.

State the incentives and penalties related with power factor tariff.

Description : State the incentives and penalties related with power factor tariff.

Last Answer : Incentives and penalties related with power factor tariff: In addition to basic tariff (Maximum Demand Tariff / KVA Maximum Demand Tariff / Load factor tariff) the tariff in which P.F. of ... industrial consumer/H.T/ commercial consumers with contract demand above 80 kw/ 100Kva/107 hp consumer.

State the objectives of tariff systems.

Description : State the objectives of tariff systems.

Last Answer : Objectives of tariff system: 1) Recover judiciously and legally capital investment made on electricity generation, transmission & distribution. 2) Recover judiciously and legally the cost of operation, supplies ... for high power factor. 8) Gain a suitable profit on the capital investment.

State any four periodical maintenance which is necessary in transformer to achieve energy conservation.

Description : State any four periodical maintenance which is necessary in transformer to achieve energy conservation.

Last Answer : Periodical maintenance necessary in transformer to achieve energy conservation: Proper periodical maintenance leads in Energy conservation 1) Check Voltage, current, temperature and other parameters. 2) ... breather and silica gel. 5) Check cooling arrangement. 6) Check Insulation resistance.

State and explain any four technical losses in transmission and distribution systems.

Last Answer : Technical losses: i) Copper losses ii) Unbalance loading iii) Long length of distribution lines iv) Conductor of inadequate size v) Various losses in transformer vi) Long distance between transformer and ... be the season behind this which is due to less interest of the line men in their work.

State the need of energy conservation in transformer.

Description : State the need of energy conservation in transformer. 

Last Answer : Need of energy conservation in transformer: In electrical power system, transformers are used to change the voltage levels of different sections as per the need of economic and efficient operation of ... for some other good reason. Therefore, there is need of energy conservation in transformer.

State the need of energy conservation in electrical motor.

Description : State the need of energy conservation in electrical motor.

Last Answer : Need of energy conservation in Electrical motors: 1. Induction motors are used as electrical drives in industrial, commercial and residential sectors. 2. Considering all industrial applications, 70% of ... system. 8. To adopt advanced technology in design and to use better quality materials.

State and explain any four factors governing selection of induction motor.

Description : State and explain any four factors governing selection of induction motor.

Last Answer : The factors governing the selection of Induction motor: 1) Load torque required at normal speed matches with available torque of motor. 2) Break down torque or pull out torque or maximum torque ... If selecting energy efficient motor the cost benefit analysis over the long run must be worked out.

Define the following terms and state their units: (i) Luminous intensity, (ii) Luminous flux

Description : Define the following terms and state their units: (i) Luminous intensity, (ii) Luminous flux

Last Answer : i) Luminous intensity: This is defined as the luminous flux emitted into a solid angle of space in a specific direction. Its unit is the candela.  OR  The luminous flux per unit solid angle ( ... energy radiated by the light source in all direction. The unit of luminous flux is lumen (lm) 

State the functions of National Productivity Councils

Description : State the functions of National Productivity Councils

Last Answer : Functions of National Productivity Councils: i. Consultancy to organizations on productivity improvement ii. Training to personnel at different levels iii. Dissemination of Productivity information ... . iv. Productivity Research and Database v. Productivity Publications vi. Productivity Awards

Did the adoption of joint capabilities integration and development system ( JCIDS) allow DoD to do?

Description : Did the adoption of joint capabilities integration and development system ( JCIDS) allow DoD to do?

Last Answer : What is the answer ?

What is the reason behind the adoption of 'GRADE' system instead of our old' MARKS' system? Options: A) It will improve the quality of assessment. B) It will improve teacher student relationship. C) It will eliminate the differentiation between students on marks basis. D) Grading system is easier than marks system.

Description : What is the reason behind the adoption of 'GRADE' system instead of our old' MARKS' system? Options: A) It will improve the quality of assessment. B) It will improve teacher student ... eliminate the differentiation between students on marks basis. D) Grading system is easier than marks system.

Last Answer : C) It will eliminate the differentiation between students on marks basis. 

Explain how technical losses can be reduced by use of energy efficient transformer in Transmission and Distribution system.

Description : Explain how technical losses can be reduced by use of energy efficient transformer in Transmission and Distribution system.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

List out the energy conservation equipments related to • Lighting system • Induction motor

Description : List out the energy conservation equipments related to • Lighting system • Induction motor

Last Answer : Energy conservation equipments related to:  1. Lighting System:  1. Luxmeter 2. Power Analyzer 3. Voltage Stabilizer 4. Electronic Ballast 5. LED Lamp 6. Control gear or Regulators 7. ... 2. Power Analyzer 3. Digital Voltmeter 4. Digital Ammeter 5. Wattmeter 6. Different types of starter

Explain the following energy conservation techniques: (i) By reducing I2R losses in Trans. system (ii) By optimizing distribution voltage.

Description : Explain the following energy conservation techniques: (i) By reducing I2R losses in Trans. system (ii) By optimizing distribution voltage.

Last Answer : i) By reducing I2R losses in Trans:  1. Opting for low resistance All Aluminum Alloy conductors (AAAC) in place of conventional aluminum cored steel reinforced (ACSR) lines. 2. ... line power losses. Thus maintaining the voltages at the specified levels leads to energy savings/conservation.

With example explain how the replacement of lamps in lighting system contributes for energy conservation?

Description : With example explain how the replacement of lamps in lighting system contributes for energy conservation?

Last Answer : Replacement of lamps in lighting system contributes for energy conservation: i. Replacing incandescent lamps by Compact Fluorescent Lamps (CFL's) ii. Replacing conventional fluorescent lamp by energy efficient fluorescent ... lights in place of all other lamps above as feasible (in terms of cost) 

List out the different technical losses that takes place in Transmission and Distribution system.

Description : List out the different technical losses that takes place in Transmission and Distribution system.

Last Answer : Different technical losses that takes place in Transmission and Distribution system: 1) Losses due to random growth of sub transmission &distribution system. planned growth/expansion maintains ... unsatisfactory reactive power compensation. 6) Losses due to poor quality of equipment used. 

Explain the role of adequate maintenance of lighting system in energy conservation.

Description : Explain the role of adequate maintenance of lighting system in energy conservation.

Last Answer : Role of adequate maintenance of lighting system in energy conservation: Illumination level reduces due to accumulation of dirt on lamps and luminaries. Further as the lamps get older their ... should be conducted to take advantage of energy conservation opportunities as user requirements change.

Write any four merits of co-generation system.

Description : Write any four merits of co-generation system.

Last Answer : Merits of co-generation system: 1) Co-generation can meet both power & heat needs. 2) Less cost than conventional generation. 3) Higher system efficiency as energy wastage is ... Due to decentralization of electricity supply it avoids transmission losses & makes system more flexible.

With a neat diagram, explain gas engine co-generation system.

Description : With a neat diagram, explain gas engine co-generation system.

Last Answer : Gas engine co-generation system:  Spark Ignition Gas Engine: These engines have shaft efficiency near about 35% but low capital cost/kW comparing to compression idnition engine. Temperature rangr ... ignition engines require complex cooling system as compared to spark ignition gas engine.

With a neat diagram, explain back pressure steam turbine co-generation system.

Description : With a neat diagram, explain back pressure steam turbine co-generation system.

Last Answer : Back pressure steam turbine co-generation system: In this type steam enters the turbine chamber at High Pressure and expands to Low or Medium Pressure. Enthalpy difference is used for generating power / work. ... , the overall thermal efficiency of the system could reach as much as 90 percent.

With neat diagram explain use of “reactive power controller” to reduce technical losses in transmission and distribution system.

Description : With neat diagram explain use of “reactive power controller” to reduce technical losses in transmission and distribution system.

Last Answer : Reactive power compensation in Transmission and Distribution systems: The reactive power is present in lines due to the reactive loads and device/ component reactance. This leads to heavy currents for active ... switched to the line as per the requirement of lagging or leading reactive VA. 

With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Description : With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Last Answer : (i) Steam turbine co-generation system: The two types of steam turbines most widely used are the backpressure and the extraction. Another variation of the steam turbine topping ... power. The exhaust or the extracted steam from the steam turbine provides the required thermal energy.

Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Description : Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Last Answer : (i) Balancing Phase currents: Proper (healthy balanced) three phase loads always draw equal currents in all lines but single phase loads in the 3 phase 4 wire system or loads connected between two ... . 11) Minimize I2R losses. 12) Balance the load currents. 13) Regulate the system voltages.

Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Description : Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Last Answer : Energy conservation techniques by installation of separate transformer / servo stabilizer: The luminous efficiency of lamps depends upon the voltage applied across the terminals. It gives its best ... the voltage constant in that installation for giving best luminous efficiency of lamps.

Describe the following energy conservation methods of lighting system. i) By replacing lamp sources ii) Using light control gears.

Description : Describe the following energy conservation methods of lighting system. i) By replacing lamp sources ii) Using light control gears.

Last Answer : Energy conservation methods of lighting system:  i) By replacing lamp sources:  Installation of energy efficient fluorescent lamps in place of Conventional fluorescent lamps. Installation of ... (HF) electronic ballasts in place of conventional ballasts which saves energy up to 35%.