List out the energy conservation techniques in Fans.

List out the energy conservation techniques in Fans.
by

1 Answer

Answer :

Following are energy conservation techniques in Fans :

Use the electronic regulators instead of conventional regulator. The fan used at low speed instead of high speed. Adjust the direction of the ceiling fan so the air blows down. Make sure to turn your ceiling fan “off “when you leave the home and industry. or even more energy savings, purchase a ceiling fan that has earned the ENERGY STAR rating, Whole house fans are large, powerful fans usually 20-48 inches in diameter with a one-quarter to one-half horsepower motor. Don't forget to properly maintain your electric fan and keep it in good working order.  When shopping for an electric fan or any other type of home appliance, it's easy to estimate appliance energy consumption by following this formula below: 

 Wattage x Hours Used Per Day / 1000 = Daily Kilowatt-hour (kWh) Consumption (1 kilowatt [kw] = 1000 watts)

by

Related questions

List out energy conservation techniques to be adopted to reduce losses in the induction motor.

Description : List out energy conservation techniques to be adopted to reduce losses in the induction motor.

Last Answer : Following are the list of energy conservation techniques in electrical motors:  1) Reduction in iron losses by using low loss silicon steel core material laminated to thinner dimension. 2) Using bigger ... balancing. 11) By improving power quality. 12) Operating motor in star mode at light load.

Explain the following energy conservation techniques: (i) By reducing I2R losses in Trans. system (ii) By optimizing distribution voltage.

Description : Explain the following energy conservation techniques: (i) By reducing I2R losses in Trans. system (ii) By optimizing distribution voltage.

Last Answer : i) By reducing I2R losses in Trans:  1. Opting for low resistance All Aluminum Alloy conductors (AAAC) in place of conventional aluminum cored steel reinforced (ACSR) lines. 2. ... line power losses. Thus maintaining the voltages at the specified levels leads to energy savings/conservation.

Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Description : Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Last Answer : Following are the suggestion the energy conservation techniques in following cases :  (i) Motor is running with 70% loaded condition: Use APFC or IPFC for better power factor improvement. Use ... If possible use low capacity motor for above condition. If possible switch off the motor.

Why energy conservation techniques should be adopted in transformers even though its efficiency is 90%?

Description : Why energy conservation techniques should be adopted in transformers even though its efficiency is 90%? 

Last Answer : Reason for energy conservation techniques should be adopted in transformers even though its efficiency is 90% : Transformer performance depends on its efficiency. Transformers used in real-time ... improve the efficiency of the transformer more than 90% as there are no mechanical losses.

State the opportunities for energy conservation techniques in transformers.

Description : State the opportunities for energy conservation techniques in transformers.

Last Answer : Opportunities for energy conservation techniques in transformers: Most of the energy loss that occurs in transformer is due to heat or vibration in the core that also reduces life of ... 9. Use better quality insulation materials to improve overload capacity and decrease dielectric leakages. 

Explain the “mitigation of power theft” and “faulty meter replacement” for energy conservation techniques to reduce commercial losses.

Description : Explain the “mitigation of power theft” and “faulty meter replacement” for energy conservation techniques to reduce commercial losses. 

Last Answer : Energy conservation techniques to reduce commercial losses:  1. Mitigation of Power Theft: Power theft being the most important issue which all of the service providing utilities ... agricultural sector. Prepaid meters may prove effective measures against unauthorized abstraction of energy. 

Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Description : Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Last Answer : (i) Balancing Phase currents: Proper (healthy balanced) three phase loads always draw equal currents in all lines but single phase loads in the 3 phase 4 wire system or loads connected between two ... . 11) Minimize I2R losses. 12) Balance the load currents. 13) Regulate the system voltages.

Explain any two energy conservation techniques in fan.

Description : Explain any two energy conservation techniques in fan.

Last Answer : Following are energy conservation techniques in Fans : 1) Use the electronic regulators instead of conventional regulator: Function of regulator is to control the speed of the fan. The conventional regulators ... 't forget to properly maintain your electric fan and keep it in good working order. 

List out the energy conservation equipments related to • Lighting system • Induction motor

Description : List out the energy conservation equipments related to • Lighting system • Induction motor

Last Answer : Energy conservation equipments related to:  1. Lighting System:  1. Luxmeter 2. Power Analyzer 3. Voltage Stabilizer 4. Electronic Ballast 5. LED Lamp 6. Control gear or Regulators 7. ... 2. Power Analyzer 3. Digital Voltmeter 4. Digital Ammeter 5. Wattmeter 6. Different types of starter

List the energy conservation technique in induction motor.

Description : List the energy conservation technique in induction motor. 

Last Answer : Following are the list of energy conservation techniques in electrical motors: 1) Reduction in iron losses by using low loss silicon steel core material laminated to thinner dimension. 2) Using bigger length ... at light load. 13) By rewinding in induction motor 14) By motor survey

State the difference between energy conservation and energy audit.

Description : State the difference between energy conservation and energy audit. 

Last Answer : energy conservation Energy audit It is reducing the growth of energy consumption by avoiding unnecessary usage of energy It is an inspection, survey & analysis of energy flows ... Various measuring instruments, with proper sensing elements are required for the energy audit. 

Define Energy conservation.

Description : Define Energy conservation. 

Last Answer : Energy conservation:  Reduction in the amount of energy consumed in a process or system, or by an organization or society, through economy, elimination of waste, and rational use is referred ... electrical power and to increase the efficiency of every machine and material by minimizing the losses.

With example explain how the replacement of lamps in lighting system contributes for energy conservation?

Description : With example explain how the replacement of lamps in lighting system contributes for energy conservation?

Last Answer : Replacement of lamps in lighting system contributes for energy conservation: i. Replacing incandescent lamps by Compact Fluorescent Lamps (CFL's) ii. Replacing conventional fluorescent lamp by energy efficient fluorescent ... lights in place of all other lamps above as feasible (in terms of cost) 

State how 'parallel operation of transformers' helps in energy conservation.

Description : State how 'parallel operation of transformers' helps in energy conservation.

Last Answer : 'Parallel operation of transformers' helps in energy conservation: The transformers operate near their maximum efficiency at around 70 % to 100 % of their rated loads. For a huge load system drawing highly ... if of higher rating may be put in service while the first one may be switched off.

Explain parallel operation of transformer in context of energy conservation.

Description : Explain parallel operation of transformer in context of energy conservation.

Last Answer : Parallel operation of the transformer in context of energy conservation: The transformers operate near their maximum efficiency around 70 % to 100 % of their rated loads. For huge establishments drawing highly ... thus saving its low load losses. This is done as per the requirements of the loads.

Explain the role of adequate maintenance of lighting system in energy conservation.

Description : Explain the role of adequate maintenance of lighting system in energy conservation.

Last Answer : Role of adequate maintenance of lighting system in energy conservation: Illumination level reduces due to accumulation of dirt on lamps and luminaries. Further as the lamps get older their ... should be conducted to take advantage of energy conservation opportunities as user requirements change.

State salient features of Energy conservation Act-2003

Description : State salient features of Energy conservation Act-2003

Last Answer : Salient features of Energy Conservation Act-2003: i) The Central Government to prepare a National Electricity Policy in consultation with State Governments. ii) Thrust to complete the rural ... to undertake generation and generating companies would be free to take up distribution businesses.

Explain energy conservation technique in induction motor by improving mechanical power and transmission efficiency.

Description : Explain energy conservation technique in induction motor by improving mechanical power and transmission efficiency.

Last Answer : Energy Conservation Technique in Induction Motor: To improve the mechanical power and transmission efficiency, proper selection of belt drives and gear drives suitable for particular application is ... . Energy conservation is achieved by using more efficient gears for particular applications. 

Explain the following Energy conservation methods of electrical motor : (a) Rewinding of motors (b) Operating in star mode

Description : Explain the following Energy conservation methods of electrical motor : (a) Rewinding of motors (b) Operating in star mode

Last Answer : Energy conservation methods of an electric motor:  (a) Rewinding of motors: i) During rewinding by preserving the original winding characteristics (material quality, design and structure). It is ... in the lines also reduces leading to lower copper losses in motor and decrease line losses.

Discuss how power factor tariff results into energy conservation.

Description : Discuss how power factor tariff results into energy conservation.

Last Answer : Power factor tariff results into energy conservation: i) Applying incentives and penalties according to power factor is an effective way, which enables consumer to improve power factor so that he can ... finally leads to reduction in the current drawn by the load and helps for energy conservation.

Discuss the role of replacement of old lamps by new more energy efficient lamps in the conservation of energy.

Description : Discuss the role of replacement of old lamps by new more energy efficient lamps in the conservation of energy.

Last Answer : Role of replacement of old lamps by new more energy efficient lamps in the conservation of energy: i) Replacing incandescent lamps by Compact Fluorescent lamps: High wattage incandescent lamps are ... lamps of same luminous output. By these replacements, much more energy can be conserved.

Explain the need of energy conservation in present scenario.

Description : Explain the need of energy conservation in present scenario.

Last Answer : Need of energy conservation in present scenario: 1. Fossil fuels like coal, oil which have taken no. of years to form and now they are on the verge of depleting soon. 2. In last ... protection and integrated economic and social development. 9. Energy saved is as good as energy generated. 

Draw block diagram of microprocessor based centrallized control equipment of energy conservation and explain it.

Description : Draw block diagram of microprocessor based centrallized control equipment of energy conservation and explain it.

Last Answer : Microprocessor based centralized control equipment of energy conservation: The sensors are employed to get the values/levels of quantities to be controlled like intensity of light, speed of machine ... using the RAM. The requisite signals are given to the control gear for controlling loads. 

What is Time of Day tariff? How it help in energy conservation?

Description : What is Time of Day tariff? How it help in energy conservation?

Last Answer : Time-off-day tariff:- In addition to basic tariff (Maximum Demand Tariff / KVA Maximum Demand Tariff / Load factor tariff /also the tariff in which P.F. of industrial consumer is taken ... the rated load for longer times of the day their overall efficiency gets higher helping to conserve energy.

State any four periodical maintenance which is necessary in transformer to achieve energy conservation.

Description : State any four periodical maintenance which is necessary in transformer to achieve energy conservation.

Last Answer : Periodical maintenance necessary in transformer to achieve energy conservation: Proper periodical maintenance leads in Energy conservation 1) Check Voltage, current, temperature and other parameters. 2) ... breather and silica gel. 5) Check cooling arrangement. 6) Check Insulation resistance.

Explain energy conservation technique in induction motor by minimizing idle and redundant running of motor.

Last Answer : Energy conservation technique in induction motor by minimizing idle and redundant running of motor: 1) Loss of energy as the no load power drawn is approximately about 12% to 16% of rated ... to unnecessary line losses. 4) Reduction in overall system energy efficiency over period of time.

State the need of energy conservation in transformer.

Description : State the need of energy conservation in transformer. 

Last Answer : Need of energy conservation in transformer: In electrical power system, transformers are used to change the voltage levels of different sections as per the need of economic and efficient operation of ... for some other good reason. Therefore, there is need of energy conservation in transformer.

State the need of energy conservation in electrical motor.

Description : State the need of energy conservation in electrical motor.

Last Answer : Need of energy conservation in Electrical motors: 1. Induction motors are used as electrical drives in industrial, commercial and residential sectors. 2. Considering all industrial applications, 70% of ... system. 8. To adopt advanced technology in design and to use better quality materials.

Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Description : Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Last Answer : Energy conservation techniques by installation of separate transformer / servo stabilizer: The luminous efficiency of lamps depends upon the voltage applied across the terminals. It gives its best ... the voltage constant in that installation for giving best luminous efficiency of lamps.

Describe the following energy conservation methods of lighting system. i) By replacing lamp sources ii) Using light control gears.

Description : Describe the following energy conservation methods of lighting system. i) By replacing lamp sources ii) Using light control gears.

Last Answer : Energy conservation methods of lighting system:  i) By replacing lamp sources:  Installation of energy efficient fluorescent lamps in place of Conventional fluorescent lamps. Installation of ... (HF) electronic ballasts in place of conventional ballasts which saves energy up to 35%.

Describe the following energy conservation methods of electrical motor. i) By motor survey ii) By matching loads with motor rating

Description : Describe the following energy conservation methods of electrical motor. i) By motor survey ii) By matching loads with motor rating

Last Answer : Energy conservation methods of electrical motor:  1) By Motor Survey: Large industries have a massive population of LT motors. Load survey of LT motors can be taken-up methodically to ... -speed motors, eddy-current couplings, fluid couplings, and solid-state electronic variable speed drives.

Explain energy conservation technique “by improving power quality” for induction motor.

Description : Explain energy conservation technique “by improving power quality” for induction motor.

Last Answer : Energy conservation method in induction motor by improving power quality: Electrical energy can be conserved by improving the power quality. It can be achieved by avoiding voltage unbalance, maintaining ... losses can be minimized by using harmonic filter thus reducing the harmonics in the system.

Suggest energy conservation techniques to be used in automobile workshop.

Description : Suggest energy conservation techniques to be used in automobile workshop.

Last Answer : 1.Take advantage of the used-oil exemption rule by installing an oil-drip heater for your facility. you can burn your used oil and generate heat at your facility reducing the disposal costs associated ... watt LED exit lights. These lights last longer (up to 25 years) and reduce maintenance costs.

Explain any four proper fanning techniques which can be used for soil conservation. -SST 10th

Description : Explain any four proper fanning techniques which can be used for soil conservation. -SST 10th

Last Answer : Soil conservation includes all those measures which help in protecting the soil from erosion or degradation. (i) Crop rotation : If the same crop is sown in the same field, year ... have contributed significantly to the stabilisation of sand dunes and in establishing the desert in western India.

List out the different technical losses that takes place in Transmission and Distribution system.

Description : List out the different technical losses that takes place in Transmission and Distribution system.

Last Answer : Different technical losses that takes place in Transmission and Distribution system: 1) Losses due to random growth of sub transmission &distribution system. planned growth/expansion maintains ... unsatisfactory reactive power compensation. 6) Losses due to poor quality of equipment used. 

List out the factors to be considered to select electrical drives for an application.

Description : List out the factors to be considered to select electrical drives for an application.

Last Answer : Following are the factors to be considered to select electrical drives for an application:  1) Load torque required at normal speed matches with available torque of motor. 2) Break down torque ... selecting an energy efficient motor the cost benefit analysis over the long run must be worked out.

List the different types of tariff.

Description : List the different types of tariff.

Last Answer : Various types of Tariff:-  1) Flat-demand Tariff  2) Simple-demand Tariff or Uniform Tariff  3) Flat-rate Tariff  4) Step-rate Tariff  5) Block-rate Tariff  6) Two-part Tariff  7) Maximum demand Tariff ... c) KW and KVAR Tariff 10) TOD (Time of Day) Tariff 11) TOU ( Time of Usage) Tariff

List functions of MEDA.

Description : List  functions of MEDA. 

Last Answer : Functions of MEDA:  1. To decide long term energy conservation policy's for Maharashtra state. 2. To coordinate with central government organization i.e NPC, MNRE etc for energy conservation policy ... our society. 6. To decide penalty, incentive, subsidy for energy conservation at state level. 

Explain how technical losses can be reduced by use of energy efficient transformer in Transmission and Distribution system.

Description : Explain how technical losses can be reduced by use of energy efficient transformer in Transmission and Distribution system.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

State the significant features of Energy Efficient Motor.

Description : State the significant features of Energy Efficient Motor.

Last Answer : Significant features of Energy Efficient Motor: 1. Material used is of high quality. ( High flux density & High current density) 2. Due to high quality material luminous used are ... Less (negligible) maintenance. 7. Operating temperature with standing capacity is more without any problem.

Explain with flow chart the energy audit procedure.

Description : Explain with flow chart the energy audit procedure.

Last Answer : Energy audit procedure: Energy audit is conducted in a following way: The planning of energy audit is decided by conducting meeting with working personnel in the industry. The complete ... the authority. During implementation, the feedbacks are taken to judge the effectiveness of the strategy.

State ABC analysis related to energy audit.

Description : State ABC analysis related to energy audit.

Last Answer : ABC analysis related to energy audit: ABC analysis provides a mechanism for identifying different categories of activities/stocks/items that will require different management and controls. i) A ... management technique which helps energy audit process to achieve the goal of energy audit. 

Explain stepwise the “Detailed energy audit” procedure.

Description : Explain stepwise the “Detailed energy audit” procedure.

Last Answer : A) Start up meeting: For this programme, we proceed with this meeting. If then continue us until implementation of energy saving measures. B) Analysis of energy used: Identify where ... are considered, the analysis of energy loss and measurement of insulation level is also considered.

What is energy flow diagram? State its significance from Energy Audit point of view.

Description : What is energy flow diagram? State its significance from Energy Audit point of view.

Last Answer : Example energy flow diagram: Significance of energy flow diagram: 1. Energy flow diagram, also known as Sankey diagram, is a specific type of flow diagram in which the width of the arrow is ... from left of the diagram. The outputs (useful and leakages/losses of energy) are shown in diagram.

List down any five Designated Consumers notified under the Energy Conservation Act.

Description : List down any five Designated Consumers notified under the Energy Conservation Act.

Last Answer : (1) Aluminium, (2) Cement, (3) Chloralkali, (4) Fertiliser, (5) Steel, (6) Pulp & Paper,  (7)Thermal Power Plants, (8) Textile, (9) Railways.

List any SIX methods of energy conservation in boilers.

Description : List any SIX methods of energy conservation in boilers.

Last Answer : List any six methods of energy conservation in boilers Following methods can conserve energy in boilers 1) Reduction radiation and convention losses 2) Waste heat recovery for heating to ... pressure and temperature 8) Periodic energy audit. Periodic preventive maintenance of all components.

List out basic transformation techniques. Explain scaling transformation with respect to 2D.

Description : List out basic transformation techniques. Explain scaling transformation with respect to 2D.

Last Answer : Basic transformations techniques are: Translation Scaling Rotation Scaling Transformation Scaling means to change the size of object. This change can either be positive or negative. To change ... . If we provide values greater than 1, then we can increase the size of the object. 

State the needs and benefits of star labelling.

Description : State the needs and benefits of star labelling. 

Last Answer : Needs of star labelling: * Star labelling is meanly required to recognize quality of product * Star labelling is also required to determine life and efficiency of the product. * Star labels ... emission and air pollution will be reduces. 5. Market efficiency and compilation will be improve. 

State the advantages of cogeneration.

Description : State the advantages of cogeneration. 

Last Answer : Advantages of co-generation: 1) Co-generation can meet both power & heat requirements. 2) Less cost than conventional generation. 3) Higher system efficiency due to energy wastage is highly ... reduces due to cogeneration plant is located in same premises. 10) It can maintain grid stability 

State the losses in secondary distribution system.

Description : State the losses in secondary distribution system. 

Last Answer : The losses in secondary distribution system: a) Technical losses: 1. Due to poor voltage 2. Due to unbalance load 3. Due poor quality of transformer & its components 4. Due to poor quality ... of induction type of energy meter. 3. Lack of administration. 4. Energy theft 5. Unmetered supply