Promoter is added to the catalyst to improve its (A) Porosity (B) Sensitivity (C) Surface area (D) None of these

Promoter is added to the catalyst to improve its
(A) Porosity
(B) Sensitivity
(C) Surface area
(D) None of these
by

1 Answer

Answer :

(B) Sensitivity
by

Related questions

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

Helium-mercury method is used for the measurement of the __________ of the catalyst. (A) Surface area (B) Porosity (C) Pore volume (D) Both (B) & (C)

Description : Helium-mercury method is used for the measurement of the __________ of the catalyst. (A) Surface area (B) Porosity (C) Pore volume (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Description : If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Last Answer : (B) Porosity is of less importance

Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates is not used to derive BET equation? (A) Langmuir's assumption applies to every adsorbed layer (B) There is no dynamic equilibrium between successive layer (C) The adsorbed layer may be polymolecular in thickness and the heat of adsorption in each layer (except the first one) is involved in each of the evaporation process (D) None of these

Description : Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates ... (except the first one) is involved in each of the evaporation process (D) None of these

Last Answer : (B) There is no dynamic equilibrium between successive layer

Promoter (A) Initiates a chemical reaction and is a catalyst by itself (B) Alters the position of equilibrium in a reversible reaction (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals(D) All (A), (B) and (C)

Description : Promoter (A) Initiates a chemical reaction and is a catalyst by itself (B) Alters the position of equilibrium in a reversible reaction (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals (D) All (A), (B) and (C)

Last Answer : (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals

BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed

Description : BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed

Last Answer : (A) Specific surface of a porous catalyst

Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Last Answer : (C) K2O

Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Description : Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Last Answer : (C) V2O5

Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Last Answer : (B) K2O

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in __________ of the catalyst. (A) Stabilisation (B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

A catalyst promoter (A) Improves the activity of a catalyst (B) Acts as a catalyst support (C) Itself has very high activity (D) All (A), (B) and (C)

Description : A catalyst promoter (A) Improves the activity of a catalyst (B) Acts as a catalyst support (C) Itself has very high activity (D) All (A), (B) and (C)

Last Answer : (A) Improves the activity of a catalyst

Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Description : Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Last Answer : (B) 60

Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in a reaction involving many steps is the fastest step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Description : Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in ... step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Last Answer : (A) A lower temperature favours the reaction of lower activation energy

Helium-mercury method can be used to determine the __________ of the catalyst particle. (A) Pore volume (B) Solid density (C) Porosity (D) All (A), (B), & (C)

Description : Helium-mercury method can be used to determine the __________ of the catalyst particle. (A) Pore volume (B) Solid density (C) Porosity (D) All (A), (B), & (C)

Last Answer : (D) All (A), (B), & (C)

A substance which increases the efficiency of a catalyst is termed as: A. Promoter (Answer) B. Activator C. Retarder D. Super catalyst

Description : A substance which increases the efficiency of a catalyst is termed as: A. Promoter (Answer) B. Activator C. Retarder D. Super catalyst

Last Answer : A. Promoter (Answer)

Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre-coated on the filter medium prior to filtration (C) Separated from the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

A catalyst inhibitor (A) Lessens its selectivity (B) May be useful for suppressing undesirable side reactions (C) Is added in small quantity during the catalyst manufacture itself (D) All (A), (B) and (C

Description : A catalyst inhibitor (A) Lessens its selectivity (B) May be useful for suppressing undesirable side reactions (C) Is added in small quantity during the catalyst manufacture itself (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Description : A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Considering the endothermic dissociation of CaCO3 in a closed vessel (CaCO3 ⇌ CaO + CO2 ), the pressure of CO2 increases, if (A) A catalyst is added (B) The temperature is increased (C) An inert gas is pumped keeping the temperature constant (D) None of these

Description : Considering the endothermic dissociation of CaCO3 in a closed vessel (CaCO3 ⇌ CaO + CO2 ), the pressure of CO2 increases, if (A) A catalyst is added (B) The temperature is increased (C) An inert gas is pumped keeping the temperature constant (D) None of these

Last Answer : (B) The temperature is increased

A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler (C) Helps in increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Description :  A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler ... increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Last Answer : (D) All 'a', 'b', & 'c'

The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Description : The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Last Answer : (D) Shape and porosity of the body

The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Description : The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Last Answer : (D) Shape and porosity of the body

When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Description : When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Last Answer : D. detector sensitivity

When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Description : When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Last Answer : d. Detector sensitivity

Catalyst carriers (A) Have very high selectivity (B) Increase the activity of a catalyst (C) Provide large surface area with a small amount of active material (D) Inhibit catalyst poisoning

Description : Catalyst carriers (A) Have very high selectivity (B) Increase the activity of a catalyst (C) Provide large surface area with a small amount of active material (D) Inhibit catalyst poisoning

Last Answer : (C) Provide large surface area with a small amount of active material

(A) Measures the catalyst surface area directly (B) Operates at very high pressure (C) Is made entirely of stainless steel (D) None of these

Description : BET apparatus (A) Measures the catalyst surface area directly (B) Operates at very high pressure (C) Is made entirely of stainless steel (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the determination of catalyst surface area and pore size distribution (C) A higher temperature favours the reaction of higher activation energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

B.E.T. method of finding out surface area of a catalyst, uses the extension of __________ isotherm. (A) Langmuir (B) Freundlich (C) Tempkin (D) None of these

Description : B.E.T. method of finding out surface area of a catalyst, uses the extension of __________ isotherm. (A) Langmuir (B) Freundlich (C) Tempkin (D) None of these

Last Answer : (A) Langmuir

__________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2(C) CO2(D) He

Description : __________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2 (C) CO2 (D) He

Last Answer : (A) N2

. B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Description : . B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Last Answer : (C) Surface area

How does intermittent fasting improve insulin sensitivity?

Description : How does intermittent fasting improve insulin sensitivity?

Last Answer : During fasting, when we restrict the intake of food, our body tissues do not have any other choice but to burn the accumulated fat for energy. The fat deposits become the fuel ... powerful. Thus, intermittent fasting is one of the most efficient insulin stabilizers to control glucose fluctuations.

What will be the effect on equilibrium if (i) a catalyst is added to it (ii) An inert gas is added at constant volume

Description : What will be the effect on equilibrium if (i) a catalyst is added to it (ii) An inert gas is added at constant volume

Last Answer : Ans. (i) The state of equilibrium is not disturbed on adding catalyst rather it is attained quickly. (ii) No effect on state of equilibrium

What happens when a catalyst is added to a system at equilibrium? A The reaction follows an alternative pathway of lower activation energy. B The heat of reaction decreases. C The potential energy of the reactants decreases. D The potential energy of the products decreases. E The rate of chemical reaction decreases.

Description : What happens when a catalyst is added to a system at equilibrium? A The reaction follows an alternative pathway of lower activation energy. B The heat of reaction decreases. C The potential ... decreases. D The potential energy of the products decreases. E The rate of chemical reaction decreases.

Last Answer : A The reaction follows an alternative pathway of lower activation energy.

The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion of the resin. C. Produces porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Description : The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion ... porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Last Answer : B. Produces porosity on the internal portion of the resin.

Rough surface/Porosity of porcelain is a result of: A. Lack of compression/ condensation B. Sudden high temperature

Description : Rough surface/Porosity of porcelain is a result of: A. Lack of compression/ condensation B. Sudden high temperature

Last Answer : A. Lack of compression/ condensation

Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total surface area of 6291456 `cm^(2)

Description : Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total surface area of 6291456 `cm^(2)

Last Answer : Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total ... B. `80` C. `20` D. `22`

Fillers such as zinc oxide and carbon black are added to the crude natural rubber before vulcanisation in order to improve its (A) Elasticity (B) Strength (C) Plasticity (D) Weathering characteristics

Description : Fillers such as zinc oxide and carbon black are added to the crude natural rubber before vulcanisation in order to improve its (A) Elasticity (B) Strength (C) Plasticity (D) Weathering characteristics

Last Answer : (D) Weathering characteristics

Phenols are added in gasoline to (A) Improve the octane number(B) Act as an antioxidant(C) Reduce its viscosity(D) Increase its pour point

Description : Phenols are added in gasoline to (A) Improve the octane number (B) Act as an antioxidant (C) Reduce its viscosity (D) Increase its pour point

Last Answer : (B) Act as an antioxidant

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication(C) Develop new improved properties not present in the original resin(D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resin (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Description : The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Last Answer : (A) 3

Plasticisers are added to polymers to improve their (A) Tensile strength (B) Softness & flexibility (C) Acid resistance (D) Alkali resistance

Description : Plasticisers are added to polymers to improve their (A) Tensile strength (B) Softness & flexibility (C) Acid resistance (D) Alkali resistance

Last Answer : (B) Softness & flexibility

__________ are added in lacquers to remove film brittleness and to improve adhereness. (A) Film forming materials (B) Plasticisers (C) Diluents (D) Solvents

Description : __________ are added in lacquers to remove film brittleness and to improve adhereness. (A) Film forming materials (B) Plasticisers (C) Diluents (D) Solvents

Last Answer : (B) Plasticisers

Rosin soap is added during paper manufacture to (A) Impart adhesive properties (B) Improve opacity (C) Impart resistance to penetration by liquids (D) None of these

Description : Rosin soap is added during paper manufacture to (A) Impart adhesive properties (B) Improve opacity (C) Impart resistance to penetration by liquids (D) None of these

Last Answer : (C) Impart resistance to penetration by liquids

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Lead is added to 60:40 brass primarily to improve (A) Machinability (B) Corrosion resistance (C) Fluidity (D) Strength

Description : Lead is added to 60:40 brass primarily to improve (A) Machinability (B) Corrosion resistance (C) Fluidity (D) Strength

Last Answer : (A) Machinability

.In full dentures porosity in the most thickest area is due to:** A. Gaseous porosity B. Shrinkage porosity

Description : .In full dentures porosity in the most thickest area is due to:** A. Gaseous porosity B. Shrinkage porosity

Last Answer : A. Gaseous porosity

Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Description : Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The importance of diffusion in a catalyst are increased by (A) Large catalyst particle size (B) An active surface of the catalyst (C) Small pore diameter (D) All (A), (B) and (C)

Description : The importance of diffusion in a catalyst are increased by (A) Large catalyst particle size (B) An active surface of the catalyst (C) Small pore diameter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction