Description : Methyl benzoate on hydrolysis gives (a) Acetic acid (b) Benzoic acid (c) Picric acid (d) Phenylacetic acid
Last Answer : Benzoic acid
Description : Benzaldehyde reacts with acetic anhydride in the presence of sodium acetate at 180°C to give : (a) Mandelic acid (b) Cinnamic acid (c) Malonic acid (d) Benzoic acid
Last Answer : Cinnamic acid
Description : Ethyl acetoacetate undergoes acid-hydrolysis with dilute HCl to form (a) Acetoacetic acid (b) Succinic acid (c) Acetic acid (d) Adipic acid
Last Answer : Acetoacetic acid
Description : In beri beri there will be accumulation of _________ in blood. (A) Aceto acetic acid (B) β−hydroxy butyric acid (C) Pyruvic acid (D) Methyl malonic acid
Last Answer : Answer : C
Description : In beri beri there will be accumulation of _______ in blood. (A) Aceto acetic acid (B) β-OH butyric acid (C) Pyruvic acid (D) Methyl malonic acid
Description : Which one of the following is used as preservative for foodstuff? (1) Sodium Benzoate (2) Picric acid (3) Glycerine (4) Sodium Chloride
Last Answer : (1) Sodium Benzoate Explanation: Sodium benzoate is a preservative. It is bacteriostatic and fungistatic under acidic conditions. It is most widely used in acidic foods such as salad dressings (vinegar), ... (vinegar), and condiments. It is also used as a preservative in medicines and cosmetics.
Description : Hydrochloric acid is also known as - (1) Galic acid (2) Picric acid (3) Muriatic acid (4) Chloric acid
Last Answer : (3) Muriatic acid Explanation: Hydrochloric acid was historically called acidum sails, muriatic acid, and spirits of salt because it was produced from rock salt and green vitriol and later ... similar substances common salt and sulfuric acid. Hydrochloric acid is found naturally in gastric acid.
Description : Which of the following compounds is least acidic? (a) HCl (b) Phenol (c) Acetylene (d) Picric acid
Last Answer : Acetylene
Description : Which of the following is used as an antifreeze? (a) Ethylene glycol (b) Glycerol (c) Diethyl ether (d) Picric acid
Last Answer : Ethylene glycol
Description : Hydrochloric acid is also known as (1) Galic acid (2) Picric acid (3) Muriatic acid (4) Chloric acid
Last Answer : Muriatic acid
Description : Which one of the following is used as preservative for foodstuff ? (1) Sodium Benzoate (2) Picric acid (3) Glycerine (4) Sodium Chloride
Last Answer : Sodium Benzoate
Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite
Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.
Description : The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum
Last Answer : Styrene
Description : Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8
Last Answer : Nylon-6,6
Description : Nylon-6,6 is obtained from : (a) Adipic acid and hexamethylene diamine (b) Tetrafluoroethylene (c) Vinyl cyanide (d) Vinylbenzene
Last Answer : Adipic acid and hexamethylene diamine
Description : Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene
Last Answer : Phenol and formaldehyde
Description : In adipic acid, HOOC(CH2)nCOOH, n is equal to (a) 1 (b) 2 (c) 3 (d) 4
Last Answer : 4
Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite
Last Answer : Nylon 66
Description : Picric acid is:
Last Answer : Picric acid is: A. B. C. D.
Description : Picric acid is a yellow coloured compound. Its chemical name is
Last Answer : Picric acid is a yellow coloured compound. Its chemical name is A. m-nitrobenzoic acid B. 2, 4, 6-trinitrophenol C. trinitrotoluene D. trinitroaniline
Description : Alkaloids are NOT precipitated by (A) Mayer's reagent (B) Dragendroff Reagent (C) Picric acid (D) Millon's reagent
Last Answer : (D) Millon's reagent
Description : A biochemical indication of vitamin B12 deficiency can be obtained by measuring the urinary excretion of (A) Pyruvic acid (B) Malic acid (C) Methyl malonic acid (D) Urocanic acid
Description : In pernicious anemia, Urine contains high amounts of (A) Methyl malonic acid(B) FIGLU (C) VMA (D) 5 HIAA
Last Answer : Answer : A
Description : Methyl malonic aciduria is seen in a deficiency of (A) Vitamin B6 (B) Folic acid (C) Thiamine (D) Vitamin B12
Last Answer : Answer : D
Description : This abnormal metabolite may be responsible for the neurological manifestation of pernicious anemia. (A) Taurine (B) Methyl malonic acid (C) Xanthurenic acid (D) Phenyl pyruvic acid
Last Answer : Answer : B
Description : Methyl malonic aciduria is seen in the deficiency of (A) Vitamin B6 (B) Folic acid (C) Thiamine (D) Vitamin B12
Description : This abnormal metabolite may be responsible for the neurological manifestation of pernicious anemia: (A) Taurine (B) Methyl malonic acid (C) Xantherunic acid (D) Phenyl pyruvic acid
Description : An example of competitive inhibition of an enzyme is the inhibition of a. Succinic dehydrogenase by malonic acid b. Cytochrome oxidase by cyanide c. Hexokinase by glucose-6-phosphate d. Carbonic anhydrase by carbon dioxide
Last Answer : Ans: A
Description : The metabolic reaction requiring vitamin B12 but not folate is: A. Conversion of malonic acid to succinic acid B. Conversion of homocysteine to methionine C. Conversion of serine to glycine D. Thymidylate synthesis
Last Answer : A. Conversion of malonic acid to succinic acid
Description : Aspartate amino transferase uses the following for transamination: (A) Glutamic acid and pyruvic acid (B) Glutamic acid and oxaloacetic acid (C) Aspartic acid and pyruvic acid (D) aspartic acid and keto adipic acid
Description : The end product of omega-oxidation of fatty acids having an even number of carbon atoms is (A) Adipic acid (B) Suberic acid (C) Both (A) and (B) (D) None of these
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite
Last Answer : (B) Nylon-66
Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these
Last Answer : (A) Hexamethylene diamine and adipic acid
Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol
Last Answer : (A) Adipic acid and Hexamethylene diamine
Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these
Last Answer : (D) None of these
Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin
Description : The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid
Last Answer : (C) Adipic acid
Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these
Last Answer : (B) Hexamethylene diamine and the adipic acid
Description : Nylon-6 is manufactured from (A) Caprolactam (B) Adipic acid and Hexamethylenediamine (C) Maleic anhydride and Hexamethylenediamine (D) Sebacic acid and Hexamethylenediamine
Last Answer : (A) Caprolactam
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit
Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol
Description : Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these
Description : Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid
Description : Synthetic detergents are made from – (1) Sodium stearate (2) Sodium salt of benzene sulphonic acid (3) Sodium salt of benzene carboxylic acid (4) Sodium palmitate
Last Answer : (2) Sodium salt of benzene sulphonic acid Explanation: Synthetic detergents are made from sodium salt of benezene sulphonic acid.
Description : Why does solubility decreases with increasing molecular mass in carboxylic acid ?
Last Answer : Ans. Because of increase in alkyl chain length which is hydrophobic in nature.
Description : During preparation of esters from a carboxylic acid and an alcohol in the presence of an acid catalyst, water or the ester formed should be removed as soon as it is formed.
Last Answer : Ans. The formation of esters from a carboxylic acid and an alcohol in the presence of acid catalyst in a reversible reaction. To shift the equilibrium in the forward direction, the water or ester formed should be removed as fast as it is formed.
Description : Esters can be formed by nucleophilic substitution reactions of : (a) carboxylic acids and alcohols ; acid-catalyzed (b) acid chlorides and alcohols (c) both of the above (d) neither of the above
Last Answer : both of the above
Description : Amides undergo hydrolysis under acidic conditions to give (a) Carboxylic acid and amine (b) Carboxylic acid and ammonium ion (c) Carboxylate ion and ammonium ion (d) Carboxylate ion and amine
Last Answer : Carboxylic acid and ammonium ion
Description : Consider a small aliphatic 1° amine, 1° alcohol, ester, carboxylic acid, and amide, all of similar molecular weight. Which one is most likely to have the highest boiling point? (a) The amide (b) The alcohol (c) The ester (d) The carboxylic acid
Last Answer : The amide