Nylon-66 is obtained from:

Nylon-66 is obtained from:
by

1 Answer

Answer :

Nylon-66 is obtained from: A. Hexamethylene diamine and adipic acid B. Phenol and formaldehyde C. ... and adipic acid D. Adipic acid and phthalic acid
by
selected by

Related questions

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Last Answer : Nylon 66

______ fiber is used in making bulletproof vests. (1) Nylon-66 (2) Terylene (3) Kevlar (4) Lexan

Description : ______ fiber is used in making bulletproof vests. (1) Nylon-66 (2) Terylene (3) Kevlar (4) Lexan

Last Answer : (3) Kevlar Explanation: Kevlar, a para-aramid synthetic fiber, is used for making bullet proof vests protective inserts.

__________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Description : __________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Last Answer : (A) Teflon

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (B) Nylon-66

Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Last Answer : (C) Higher hardness

Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Description : Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Last Answer : (B) Nylon-66

Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Last Answer : (A) Hexamethylene diamine and adipic acid

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Last Answer : (A) Adipic acid and Hexamethylene diamine

Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

__________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Description : __________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Last Answer : (A) Neoprene

Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR

Description : Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR

Last Answer : (B) Nylon-6

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Last Answer : (B) Nylon-66

Polycaprolactam is nothing but (A) Orlon (B) Nylon-66 (C) Nylon-6 (D) Saran

Description : Polycaprolactam is nothing but (A) Orlon (B) Nylon-66 (C) Nylon-6 (D) Saran

Last Answer : (C) Nylon-6

The inter particle forces between linear chains in nylon-66 are __________ bonds. (A) Hydrogen (B) Covalent (C) Ionic (D) None of these

Description : The inter particle forces between linear chains in nylon-66 are __________ bonds. (A) Hydrogen (B) Covalent (C) Ionic (D) None of these

Last Answer : (A) Hydrogen

__________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Description : __________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Last Answer : (A) Nylon-66

Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Description : Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Last Answer : (B) Nylon-66

Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Last Answer : (A) Terylene

The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid

Description : The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid

Last Answer : (C) Adipic acid

In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these

Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these

Last Answer : (B) Hexamethylene diamine and the adipic acid

Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Description : Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Last Answer : (A) Abrasion resistance

Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Last Answer : (D) None of these

Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (A) Polyisoprene

Clasify the polymers as addition and condenstation polymers. Nylon 66, Buna-S, Polythene.

Description : Clasify the polymers as addition and condenstation polymers. Nylon 66, Buna-S, Polythene.

Last Answer : Ans: Nylon 66 condensation polymer.  Buna-S and polythene—Addition polymer.

Arrange in increasing order of inter molecular forces. Nylon 66, Buna-S and polyethene.

Description : Arrange in increasing order of inter molecular forces. Nylon 66, Buna-S and polyethene.

Last Answer : Ans: Nylon 66 > polyethene> Buna-S 

Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66.  (b) Neoprene, PVC and Nylon 6.

Why are the numbers 6, 6 and 6 put in the name of Nylon 66 and Nylon 6?

Description : Why are the numbers 6, 6 and 6 put in the name of Nylon 66 and Nylon 6?

Last Answer : Ans: Nylon 66 means that it is formed by two monomers each containing six carbon atoms. While in Nylon 6 means that it is formed by a monomer containing six carbon atoms.

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit

Last Answer : (B) Nylon-66

In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Diamine and the ring (B) Dibasic acid and the ring (C) Diamine and the dibasic acid (D) None of these

Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Diamine and the ring (B) Dibasic acid and the ring (C) Diamine and the dibasic acid (D) None of these

Last Answer : (C) Diamine and the dibasic acid

Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Last Answer : (A) Hexamethylene diamine and adipic acid

Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966

Description : Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966

Last Answer : (A) Average degree of polymerisation of the polymer is 1966

P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Description : P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Last Answer : (C) Teflon

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Description : Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Last Answer : (D) None of these

38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene

Description : 38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene

Last Answer : Nylon-66 is an example of elastomer

Nylon-6,6 is obtained from : (a) Adipic acid and hexamethylene diamine (b) Tetrafluoroethylene (c) Vinyl cyanide (d) Vinylbenzene

Description : Nylon-6,6 is obtained from : (a) Adipic acid and hexamethylene diamine (b) Tetrafluoroethylene (c) Vinyl cyanide (d) Vinylbenzene

Last Answer : Adipic acid and hexamethylene diamine

In case of a reversible process (following pvn = constant), work obtained for trebling the volume (v1 = 1 m3 and v23 m3) is maximum, when the value of 'n' is (A) 0 (B) 1 (C) y = 1.44 (D) 1.66

Description : In case of a reversible process (following pvn = constant), work obtained for trebling the volume (v1 = 1 m3 and v23 m3) is maximum, when the value of 'n' is (A) 0 (B) 1 (C) y = 1.44 (D) 1.66

Last Answer : (A) 0

The digits of a two-digit number are in the ratio of 2 : 3 and the number obtained by interchanging the digits is bigger than the original number by 27.What is the original number? 1. 63 2. 48 3. 96 4. 69 5. 66

Description : The digits of a two-digit number are in the ratio of 2 : 3 and the number obtained by interchanging the digits is bigger than the original number by 27.What is the original number? 1. 63 2. 48 3. 96 4. 69 5. 66

Last Answer : Answer- 4 (69) Explanation:- lets digit at tens and ones place be 2x and 3x So,number is 2x*10 + 3x After interchanging number will be 3x*10 +2x so, [3x*10 +2x] – [2x*10 + 3x]27 we get,x=3 so number =69

66. From the nursing history obtained from the client, which information is most likely related to the development of gangrene on the client’s left toe?

Description : 66. From the nursing history obtained from the client, which information is most likely related to the development of gangrene on the client’s left toe?

Last Answer : D. Accidental cut in big toe while cutting toe nails

How do you remove pen ink from nylon, preferably, the do it yourself way?

Description : How do you remove pen ink from nylon, preferably, the do it yourself way?

Last Answer : To remove stains from washables ink - ball-point pen Pour denatured alcohol through the stain. Rub in petroleum jelly. Sponge with non-flammable dry cleaning solvent. Soak in detergent solution. Wash with ... Copyright 1969-1989 by Circulation Service, Inc., P.O. box 7306, Leawood, Kansas 66207

Is it possible to treat nylon (as in of an umbrella) that's defective?

Description : Is it possible to treat nylon (as in of an umbrella) that's defective?

Last Answer : You could spray Scotch-Gard on it.

Are windpants (nylon swishy pants) in fashion? If so, how do I wear them, shirt untucked, do I sag them, windjacket as well?

Description : Are windpants (nylon swishy pants) in fashion? If so, how do I wear them, shirt untucked, do I sag them, windjacket as well?

Last Answer : Swishy nylon pants are probably appropriate for warming up before a marathon. Not so good after getting out of a pool (unless lined with something other than nylon). If you wear them with the jacket, it might ... the jacket. I have no idea why anyone would make fun of you for wearing them . . .

How to find out if your fabric is made with nylon?

Description : How to find out if your fabric is made with nylon?

Last Answer : Take a tiny snip and light it. If it flares it is nylon, if it smolders it is cotton.

What's the difference between microfiber and nylon, specifically in terms of apparel?

Description : What's the difference between microfiber and nylon, specifically in terms of apparel?

Last Answer : Microfiber means the fibers of the cloth are very small (measure less than 1 denier). Nylon is what those fibers are made of. As for a base layer for your hiking trip I would recommend buying ... will stay smelling better for longer. Man made fibers will stink before the end of the first mile.

Which materials possess highest melting temperature? a.ABS b.PLA c.Nylon d.INF

Description : Which materials possess highest melting temperature? a.ABS b.PLA c.Nylon d.INF

Last Answer : c.Nylon

Which material gives finest surface finish in RP? a.ABS b.PLA c.Nylon d.INF

Description : Which material gives finest surface finish in RP? a.ABS b.PLA c.Nylon d.INF

Last Answer : b.PLA

Which material can be efficiently used as a support material? a.ABS b.PLA c.Nylon d.INF

Description : Which material can be efficiently used as a support material? a.ABS b.PLA c.Nylon d.INF

Last Answer : d.INF