Conditioners like finely divided peat are added to the fertiliser to (A) Counteract burning (B) Avoid caking & hardening (C) Produce bulk (D) Increase its solubility

Conditioners like finely divided peat are added to the fertiliser to
(A) Counteract burning
(B) Avoid caking & hardening
(C) Produce bulk
(D) Increase its solubility
by

1 Answer

Answer :

(B) Avoid caking & hardening
by

Related questions

Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ions and forms amino acids(B) Calcium present in the fertiliser helps in correcting the soil acidity(C) Particle size range of a good granular fertiliser is 10-15 mesh and itcontains less moisture as compared to finely divided powder form of fertiliser(D) Ammonium nitrate fertiliser is obtained as a by-product in an integratedsteel plant having by-product coke ovens

Description : Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ... nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Last Answer : (D) Ammonium nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

5-10-5 fertilisers mean that they contain (A) 5, 10, 5% respectively of N2 , P2O5 and K2O (B) Only 5 to 10% active fertiliser constituents (C) 5 to 10% filler & carrier of soil conditioners (D) None of these

Description : 5-10-5 fertilisers mean that they contain (A) 5, 10, 5% respectively of N2 , P2O5 and K2O (B) Only 5 to 10% active fertiliser constituents (C) 5 to 10% filler & carrier of soil conditioners (D) None of these

Last Answer : (A) 5, 10, 5% respectively of N2 , P2O5 and K2O

To counteract the bad effects of strain hardening on a cold formed part, it must be (A) Tempered (B) Normalised (C) Annealed (D) Hardened

Description : To counteract the bad effects of strain hardening on a cold formed part, it must be (A) Tempered (B) Normalised (C) Annealed (D) Hardened

Last Answer : Option C

Particulate' air pollutants are finely divided solids and liquids. Which of the following is not a ‘particulate’? (A) Dust & mists(B) Smoke & fumes(C) Photochemical smog & soot(D) None of these

Description : Particulate' air pollutants are finely divided solids and liquids. Which of the following is not a ‘particulate’? (A) Dust & mists (B) Smoke & fumes (C) Photochemical smog & soot (D) None of these

Last Answer : (D) None of these

Caking coal is desirable for (A) Burning on travelling grate (B) Coke making (C) Burning on firebars (D) All (A), (B) and (C)

Description : Caking coal is desirable for (A) Burning on travelling grate (B) Coke making (C) Burning on firebars (D) All (A), (B) and (C)

Last Answer : (B) Coke making

A travelling grate stoker is meant for the efficient burning of __________ coal. (A) Caking (B) Pulverised (C) Non-caking (D) High ash

Description : A travelling grate stoker is meant for the efficient burning of __________ coal. (A) Caking (B) Pulverised (C) Non-caking (D) High ash

Last Answer : (C) Non-caking

Which of the following fuels is the best for burning on chain grate stoker? (A) Non-caking coal (B) Caking coal (C) Coking coal (D) Pulverised coal

Description : Which of the following fuels is the best for burning on chain grate stoker? (A) Non-caking coal (B) Caking coal (C) Coking coal (D) Pulverised coal

Last Answer : (A) Non-caking coal

Ammonium nitrate (a fertiliser) is coated with limestone powder to (A) Increase its nitrogen content (B) Cut down its production cost (C) Avoid the risk of explosion (D) Add extra nutrient as fertiliser

Description : Ammonium nitrate (a fertiliser) is coated with limestone powder to (A) Increase its nitrogen content (B) Cut down its production cost (C) Avoid the risk of explosion (D) Add extra nutrient as fertiliser

Last Answer : (C) Avoid the risk of explosion

Low temperature oxidation of stored coal results in the (A) Decrease in its caking power & calorific value (B) Decrease in its carbon & hydrogen content (C) Increase in its oxygen content (D) All (A), (B) and (A)

Description : Low temperature oxidation of stored coal results in the (A) Decrease in its caking power & calorific value (B) Decrease in its carbon & hydrogen content (C) Increase in its oxygen content (D) All (A), (B) and (A)

Last Answer : (D) All (A), (B) and (A)

With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre-coated on the filter medium prior to filtration (C) Separated from the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Description : Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Last Answer : Answer: Option D

. Highly caking coals (A) Produce weak coke (B) Produce strong coke (C) May damage the coke oven walls during carbonisation (D) Both (B) and (C)

Description : . Highly caking coals (A) Produce weak coke (B) Produce strong coke (C) May damage the coke oven walls during carbonisation (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina

Description : Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina

Last Answer : (B) Iron

Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream?(A) Sedimentation tank(B) Circular clarifier(C) Mechanical flocculation(D) Chemical coagulation

Description : Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream? (A) Sedimentation tank (B) Circular clarifier (C) Mechanical flocculation (D) Chemical coagulation

Last Answer : (D) Chemical coagulation

The main use of salt in the diet is to - (1) increase the solubility of the food particles in water. (2) produce in small amounts the hydrochloric acid required for the digestion of food (3) ease the process of cooking (4) make the taste of the food better

Description : The main use of salt in the diet is to - (1) increase the solubility of the food particles in water. (2) produce in small amounts the hydrochloric acid required for the digestion of food (3) ease the process of cooking (4) make the taste of the food better

Last Answer : (2) produce in small amounts the hydrochloric acid required for the digestion of food Explanation: Salt plays a primary role in the processes of digestion and absorption. Salt activates ... hydrochloric acid. Hydrochloric acid is a very important digestive secretion, which lines the stomach walls.

The main use of salt in the diet is to (1) increase the solubility of the food particles in water (2) produce in small amounts the hydrochloric acid required for the digestion of food (3) ease the process of cooking (4) make the taste of the food better

Description : The main use of salt in the diet is to (1) increase the solubility of the food particles in water (2) produce in small amounts the hydrochloric acid required for the digestion of food (3) ease the process of cooking (4) make the taste of the food better

Last Answer : produce in small amounts the hydrochloric acid required for the digestion of food

What soil is best for planting a Yucca? Should I avoid peat compost?

Description : What soil is best for planting a Yucca? Should I avoid peat compost?

Last Answer : Yucca plants differ from most other types of plants. Their adaptation to desert environments means they prefer soil that is more sandy and dry with a high alkaline level. Yucca plants do not tolerate wet ... to have high levels of moisture and would likely not be good to add to Yucca plant soil.

Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total surface area of 6291456 `cm^(2)

Description : Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total surface area of 6291456 `cm^(2)

Last Answer : Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total ... B. `80` C. `20` D. `22`

A finely divided substance is more effective as adsorbent.

Description : A finely divided substance is more effective as adsorbent.

Last Answer : Explain the following : A finely divided substance is more effective as adsorbent.

Explain why finely divided substance is more effective as adsorbent?

Description : Explain why finely divided substance is more effective as adsorbent?

Last Answer : Explain why finely divided substance is more effective as adsorbent?

Themit consists of a finely divided mixture of iron oxide and copper. a) True b) False

Description : Themit consists of a finely divided mixture of iron oxide and copper. a) True b) False

Last Answer : b) False

Standard unit of turbidity of water is in one litre of distilled water, one milligram of finely divided (A) Silica (B) Mud (C) Clay (D) Organic matter

Description : Standard unit of turbidity of water is in one litre of distilled water, one milligram of finely divided  (A) Silica  (B) Mud  (C) Clay  (D) Organic matter 

Last Answer : (A) Silica 

Turbidity of water may be caused due to (A) Suspended clay (B) Suspended silt (C) Finely divided organic material (D) All the above

Description : Turbidity of water may be caused due to  (A) Suspended clay  (B) Suspended silt  (C) Finely divided organic material  (D) All the above 

Last Answer : (D) All the above 

Weathering of coal during storage causes (A) Reduction in coal size (B) Increase in its friability (C) Decrease in its caking capacity (D) All (A), (B) and (C)

Description : Weathering of coal during storage causes (A) Reduction in coal size (B) Increase in its friability (C) Decrease in its caking capacity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With increase in moisture content of coal, its (A) Calorific value increases (B) Caking properties diminish (C) Swelling during carbonisation becomes excessive (D) None of these

Description : With increase in moisture content of coal, its (A) Calorific value increases (B) Caking properties diminish (C) Swelling during carbonisation becomes excessive (D) None of these

Last Answer : (B) Caking properties diminish

The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Description : The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Last Answer : Answer: Option C

Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C) With increase in oxygen content, moisture holding capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C ... capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Finely ground calcium aluminate & silicate is a/an (A) Cermet (B) Cement (C) Abrasive (D) Explosive

Description : Finely ground calcium aluminate & silicate is a/an (A) Cermet (B) Cement (C) Abrasive (D) Explosive

Last Answer : (B) Cement

Vulcanisation of rubber does not increase its (A) Softness (B) Oxidation resistance (C) Weight & strength (D) Elasticity & water solubility

Description : Vulcanisation of rubber does not increase its (A) Softness (B) Oxidation resistance (C) Weight & strength (D) Elasticity & water solubility

Last Answer : (A) Softness

Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Description : Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Last Answer : Option C

Improper storage condition results in the weathering of coal and spontaneous combustion, which increases its (A) Caking index (B) Yield of carbonised products (C) Friability & oxygen content (D) Calorific value

Description : Improper storage condition results in the weathering of coal and spontaneous combustion, which increases its (A) Caking index (B) Yield of carbonised products (C) Friability & oxygen content (D) Calorific value

Last Answer : (C) Friability & oxygen content

The weathering index of a coal (A) Gives an idea of the fusion temperature of ash (B) Is related to its calorific value (C) Is a measure of its size stability, when stored & exposed to weather (D) Is a measure of its caking tendency

Description : The weathering index of a coal (A) Gives an idea of the fusion temperature of ash (B) Is related to its calorific value (C) Is a measure of its size stability, when stored & exposed to weather (D) Is a measure of its caking tendency

Last Answer : (C) Is a measure of its size stability, when stored & exposed to weather

Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable (C) Gypsum (CaSO4 . 2H2O) is obtained as a by-product in the wet process for manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Description : Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India ... manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Last Answer : (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable

Auxin antagonists compounds interact with auxins as: a. Counteract b. Increase c. Decrease d. None of the above

Description : Auxin antagonists compounds interact with auxins as: a. Counteract b. Increase c. Decrease d. None of the above

Last Answer : Counteract

(2) Nitrogen, Phosphorous and Sodium Explanation: Fertilizer (or fertiliser) is any organic or inorganic material of natural or synthetic origin (other than liming materials) that is added to a soil to supply one or more plant nutrients essential to the growth of plants. The three elements most needed in common fertilisers are Nitrogen.

Description : (2) Nitrogen, Phosphorous and Sodium Explanation: Fertilizer (or fertiliser) is any organic or inorganic material of natural or synthetic origin (other than liming materials) that is added to a ... essential to the growth of plants. The three elements most needed in common fertilisers are Nitrogen.

Last Answer : Metal are good conductors, because – (1) they contain free electrons (2) the molecules in them are very close to each other (3) the molecules in them collide very freely (4) they contain reflecting surface

The setting and hardening of cement after addition of water is due to a) Binding action of water b) Evaporation of water c) Hydration and hydrolysis of some constituent compounds of cement* d) Additional hardening compounds added to cement

Description : The setting and hardening of cement after addition of water is due to a) Binding action of water b) Evaporation of water c) Hydration and hydrolysis of some constituent compounds of cement* d) Additional hardening compounds added to cement

Last Answer : c) Hydration and hydrolysis of some constituent compounds of cement*

During the absorption of HCl gas in water (to produce liquid HCl), the gas is kept above dew point to (A) Increase the rate of absorption (B) Avoid corrosion (C) Reduce the cooling water circulation rate (D) None of these

Description : During the absorption of HCl gas in water (to produce liquid HCl), the gas is kept above dew point to (A) Increase the rate of absorption (B) Avoid corrosion (C) Reduce the cooling water circulation rate (D) None of these

Last Answer : (B) Avoid corrosion

____ is a selective process that can be controlled to produce various levels of hardening. a. Winterization c. Hydrogenization b. Bleaching d. Degumming

Description : ____ is a selective process that can be controlled to produce various levels of hardening. a. Winterization c. Hydrogenization b. Bleaching d. Degumming

Last Answer : c. Hydrogenization

The increase in hardness of metal due to its cold working is termed as the __________ hardening. (A) Work (B) Age (C) Induction (D) Flame

Description : The increase in hardness of metal due to its cold working is termed as the __________ hardening. (A) Work (B) Age (C) Induction (D) Flame

Last Answer : (A) Work

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

________ cannot increase the fatigue strength of a material. (A) Grain refining (B) Grain coarsening (C) Surface hardening (D) Shot peening

Description : ________ cannot increase the fatigue strength of a material. (A) Grain refining (B) Grain coarsening (C) Surface hardening (D) Shot peening

Last Answer : (B) Grain coarsening

Cold working of a material results in increase in hardness, which is termed as the __________ hardening. (A) Cold (B) Work (C) Age (D) Induction

Description : Cold working of a material results in increase in hardness, which is termed as the __________ hardening. (A) Cold (B) Work (C) Age (D) Induction

Last Answer : (B) Work

Between 230 and 370°C, blue brittleness is caused in mild steel because of the (A) Immobility of dislocation (B) Strain-ageing (C) Increase in Young's modulus (D) Strain hardening

Description : Between 230 and 370°C, blue brittleness is caused in mild steel because of the (A) Immobility of dislocation (B) Strain-ageing (C) Increase in Young's modulus (D) Strain hardening

Last Answer : Option B

Low temperature oxidation of coal during storage does not decrease its (A) Oxygen content (B) Caking power (C) Calorific value (D) None of these

Description : Low temperature oxidation of coal during storage does not decrease its (A) Oxygen content (B) Caking power (C) Calorific value (D) None of these

Last Answer : (D) None of these

Low temperature oxidation of coal resulting from bad storage conditions does not decrease its (A) Caking power (B) Calorific value (C) Hydrogen content (D) Oxygen content

Description : Low temperature oxidation of coal resulting from bad storage conditions does not decrease its (A) Caking power (B) Calorific value (C) Hydrogen content (D) Oxygen content

Last Answer : (D) Oxygen content

Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten

Description : Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten

Last Answer : (A) Caking capacity

Washing of coal decreases its (A) Caking index (B) Mineral matter content (C) Ash content (D) Both (B) and (C)

Description : Washing of coal decreases its (A) Caking index (B) Mineral matter content (C) Ash content (D) Both (B) and (C)

Last Answer : (B) Mineral matter content