P2O5 percentage in the phosphoric acid produced by wet process is about (A) 10 (B) 30(C) 50 (D) 70

P2O5 percentage in the phosphoric acid produced by wet process is
about
(A) 10
(B) 30
(C) 50
(D) 70
by

1 Answer

Answer :

(B) 30
by

Related questions

Triple superphosphate which contains about 46% P2O5 is produced by the reaction of phosphate rock with ortho phosphoric acid of________ percent concentration. (A) 25-28 (B) 52-54 (C) 75-80 (D) > 98

Description : Triple superphosphate which contains about 46% P2O5 is produced by the reaction of phosphate rock with ortho phosphoric acid of________ percent concentration. (A) 25-28 (B) 52-54 (C) 75-80 (D) > 98

Last Answer : (B) 52-54

Phosphoric acid is produced in wet process from phosphate rock and (A) Dilute H2SO4 (B) Concentrated H2SO4 (C) Concentrated NHO3 (D) Concentrated HCl

Description : Phosphoric acid is produced in wet process from phosphate rock and (A) Dilute H2SO4 (B) Concentrated H2SO4 (C) Concentrated NHO3 (D) Concentrated HCl

Last Answer : (A) Dilute H2SO4

P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Description : P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Last Answer : (A) 42-50

P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Description : P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Last Answer : (B) 15-20

Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Description : Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Last Answer : (B) Butyl alcohol

Electric process as compared to wet process (for the manufacture of phosphoric acid) (A) Can use only high grade phosphate rock (B) Is used less frequently (C) Produces a valuable by-product called gypsum (D) Is weak acid process

Description : Electric process as compared to wet process (for the manufacture of phosphoric acid) (A) Can use only high grade phosphate rock (B) Is used less frequently (C) Produces a valuable by-product called gypsum (D) Is weak acid process

Last Answer : (B) Is used less frequently

Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable (C) Gypsum (CaSO4 . 2H2O) is obtained as a by-product in the wet process for manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Description : Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India ... manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Last Answer : (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable

In the manufacture of ortho-phosphoric acid by strong H2SO4 leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesirable (A) CaSO4 .½ H2O and CaSO4 crystals (B) Pyrophosphoric acid (C) Meta-phosphoric acid (D) All (A), (B) and (C)

Description : In the manufacture of ortho-phosphoric acid by strong H2SO4 leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesirable (A) CaSO4 .½ H2O and CaSO4 crystals (B) Pyrophosphoric acid (C) Meta-phosphoric acid (D) All (A), (B) and (C)

Last Answer : (A) CaSO4 .½ H2O and CaSO4 crystals

Steam condenser tubes are made of admiralty brass, in which percentage of zinc & copper are __________ respectively. (A) 70 & 30 (B) 30 & 70 (C) 50 & 50 (D) 90 & 10

Description : Steam condenser tubes are made of admiralty brass, in which percentage of zinc & copper are __________ respectively. (A) 70 & 30 (B) 30 & 70 (C) 50 & 50 (D) 90 & 10

Last Answer : (A) 70 & 30

Glass is corroded by (A) Fluorine (dry or wet) (B) Sulphuric acid (C) Phosphoric acid (D) None of these

Description : Glass is corroded by (A) Fluorine (dry or wet) (B) Sulphuric acid (C) Phosphoric acid (D) None of these

Last Answer : (A) Fluorine (dry or wet)

The percentage of the calcium eliminated in feces is (A) 10–20 (B) 30–40 (C) 50–60 (D) 70–90

Description : The percentage of the calcium eliminated in feces is (A) 10–20 (B) 30–40 (C) 50–60 (D) 70–90

Last Answer : Answer : D

The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Description : The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Last Answer : Answer: Option B

Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Last Answer : Answer: Option C

The relative percentage of N2 , P2O5 and K2O” in a fertilizer

Description : The relative percentage of N2 , P2O5 and K2O” in a fertilizer

Last Answer : Ans. Fertilizer ratio

The percentage of P2O5 in diammonium hydrogen phosphate (NH4)2HPO4 is [CPMT 1992] (A) 23.48 (B) 46.96 (C) 53.78 (D) 71.00

Description : The percentage of P2O5 in diammonium hydrogen phosphate (NH4)2HPO4 is [CPMT 1992] (A) 23.48 (B) 46.96 (C) 53.78 (D) 71.00

Last Answer : (C) 53.78

Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of red phosphorous is due to its polymeric structure (C) Red phosphorous is the most reactive allotropic form of phosphorous (D) Red phosphorous, which is used in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Description : Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of ... in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Last Answer : (C) Red phosphorous is the most reactive allotropic form of phosphorous

The percentage of inactive precursors (monoidotyrosine and diiodotyrosine) in thyroglobulin is (A) 30 (B) 40 (C) 50 (D) 70

Description : The percentage of inactive precursors (monoidotyrosine and diiodotyrosine) in thyroglobulin is (A) 30 (B) 40 (C) 50 (D) 70

Last Answer : Answer : D

In the total proteins, the percentage of albumin is about (A) 20–40 (B) 30–45 (C) 50–70 (D) 80–90

Description : In the total proteins, the percentage of albumin is about (A) 20–40 (B) 30–45 (C) 50–70 (D) 80–90

Last Answer : Answer : C

.What is the percentage of the echant agent used with composit resin restorations? a . 37% of phosphoric acid in water. b. 15% c. 18.5% d. 41%

Description : .What is the percentage of the echant agent used with composit resin restorations? a . 37% of phosphoric acid in water. b. 15% c. 18.5% d. 41%

Last Answer : a . 37% of phosphoric acid in water.

Aspirin is produced by heating salicylic acid with (a) acetic anhydride in the presence of phosphoric acid (b) benzoic anhydride in the presence of phosphoric acid (c) methyl alcohol in the presence of sulfuric acid (d) phenol in the presence of sulfuric acid

Description : Aspirin is produced by heating salicylic acid with (a) acetic anhydride in the presence of phosphoric acid (b) benzoic anhydride in the presence of phosphoric acid (c) methyl alcohol in the presence of sulfuric acid (d) phenol in the presence of sulfuric acid

Last Answer : acetic anhydride in the presence of phosphoric acid

5-10-5 fertilisers mean that they contain (A) 5, 10, 5% respectively of N2 , P2O5 and K2O (B) Only 5 to 10% active fertiliser constituents (C) 5 to 10% filler & carrier of soil conditioners (D) None of these

Description : 5-10-5 fertilisers mean that they contain (A) 5, 10, 5% respectively of N2 , P2O5 and K2O (B) Only 5 to 10% active fertiliser constituents (C) 5 to 10% filler & carrier of soil conditioners (D) None of these

Last Answer : (A) 5, 10, 5% respectively of N2 , P2O5 and K2O

By which of the following methods can CH3CONH2 be converted to CH3CN? (a) Oxidize with Na2Cr2O7/H+ (b) Heat with concentrated sulfuric acid (c) Heat to 200°C (d) Warm with P2O5

Description : By which of the following methods can CH3CONH2 be converted to CH3CN? (a) Oxidize with Na2Cr2O7/H+ (b) Heat with concentrated sulfuric acid (c) Heat to 200°C (d) Warm with P2O5

Last Answer : Warm with P2O5

Which of the following statements is False about acetamide? (a) reacts with Br2/NaOH to form tertiary amine (b) undergoes acid-hydrolysis to form acetic acid (c) undergoes dehydration with P2O5 to form a nitrile (d) is a white crystalline solid, soluble in water

Description : Which of the following statements is False about acetamide? (a) reacts with Br2/NaOH to form tertiary amine (b) undergoes acid-hydrolysis to form acetic acid (c) undergoes dehydration with P2O5 to form a nitrile (d) is a white crystalline solid, soluble in water

Last Answer : reacts with Br2/NaOH to form tertiary amine

Acetic anhydride is obtained by the reaction of : (a) Acetic acid and sodium (b) Acetic acid and water (c) Acetic acid and diethyl ether (d) Acetic acid and P2O5

Description : Acetic anhydride is obtained by the reaction of : (a) Acetic acid and sodium (b) Acetic acid and water (c) Acetic acid and diethyl ether (d) Acetic acid and P2O5

Last Answer : Acetic acid and P2O5

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Description : Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Last Answer : (B) 20 to 30

Montecatini process is used for the manufacture of (A) Nitric acid (B) Phosphoric acid (C) Urea (D) Calcium ammonium nitrate (CAN)

Description : Montecatini process is used for the manufacture of (A) Nitric acid (B) Phosphoric acid (C) Urea (D) Calcium ammonium nitrate (CAN)

Last Answer : (C) Urea

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

. In order to be called steel, an alloy should have iron percentage greater than (A) 80 (B) 70 (C) 90 (D) 50

Description : . In order to be called steel, an alloy should have iron percentage greater than (A) 80 (B) 70 (C) 90 (D) 50

Last Answer : (A) 80

A phosphatic fertiliser contains 16% P2O5 . It could be (A) Dicalcium phosphate (B) Superphosphate(C) Triple superphosphate(D) None of these

Description : A phosphatic fertiliser contains 16% P2O5 . It could be (A) Dicalcium phosphate (B) Superphosphate (C) Triple superphosphate (D) None of these

Last Answer : (B) Superphosphate

Base suspension fertiliser essentially contains (A) 13% N2 and 43% P2O5 (B) 43% N2 and 13% P2O5 (C) 43% N2 and 13% K2O (D) 43% K2O and 43% P2O5

Description : Base suspension fertiliser essentially contains (A) 13% N2 and 43% P2O5 (B) 43% N2 and 13% P2O5 (C) 43% N2 and 13% K2O (D) 43% K2O and 43% P2O5

Last Answer : (A) 13% N2 and 43% P2O5

Phosphatic fertiliser is graded based on its __________ content. (A) P2O3 (B) PCl5 (C) P2O5 (D) H3PO4

Description : Phosphatic fertiliser is graded based on its __________ content. (A) P2O3 (B) PCl5 (C) P2O5 (D) H3PO4

Last Answer : (C) P2O5

The substance used as a smoke screen in warfare is (A) C2H2 (B) SiCl4 (C) P2O5 (D) PCl5

Description : The substance used as a smoke screen in warfare is (A) C2H2 (B) SiCl4 (C) P2O5 (D) PCl5

Last Answer : Option B

An AC circuit has a capacitive reactance of 30 ohms in addition to an inductive reactance of 40 ohms connected in series. What is the reactance of the circuit? A. 8.37 ohms B. 10.00 ohms C. 50.00 ohms D. 70.00 ohms

Description : An AC circuit has a capacitive reactance of 30 ohms in addition to an inductive reactance of 40 ohms connected in series. What is the reactance of the circuit? A. 8.37 ohms B. 10.00 ohms C. 50.00 ohms D. 70.00 ohms

Last Answer : Answer: B

What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.66 C. 0.30 D. 0.10

Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.66 C. 0.30 D. 0.10

Last Answer : B. 0.66

What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.10 C. 0.66 D. 0.30

Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.10 C. 0.66 D. 0.30

Last Answer : C. 0.66

Divide 30 by 1/2 and add 10. What is the answer? 25 50 65 70

Description : Divide 30 by 1/2 and add 10. What is the answer? 25 50 65 70

Last Answer : 50

Explain the manufacturing process of phosphoric acid with chemical reaction and process flow diagram.

Description : Explain the manufacturing process of phosphoric acid with chemical reaction and process flow diagram. 

Last Answer : Phosphoric acid by wet process 1. H2SO4 leaching Reaction: Process: Phosphate rock is ground and fed to chute where a recycle stream of weak phosphoric acid washes into reaction ... Phosphoric acid is recovered in triple effect evaporator and CaCl2 is separated from final settler.

The amount of benzene present in pure Benzol is about __________ percent. (A) 30 (B) 50 (C) 70 (D) 90

Description : The amount of benzene present in pure Benzol is about __________ percent. (A) 30 (B) 50 (C) 70 (D) 90

Last Answer : (C) 70

Seed germination percentage of rough lemon is: a. 50-60% b. 60-70% c. 70-80% d. 80-90%

Description : Seed germination percentage of rough lemon is: a. 50-60% b. 60-70% c. 70-80% d. 80-90%

Last Answer : 60-70%

If the radius of curvature of a hill road is 50 m, the percentage grade compensation should be (A) 60/R (B) 70/R (C) 75/R (D) 80/R

Description : If the radius of curvature of a hill road is 50 m, the percentage grade compensation should be (A) 60/R (B) 70/R (C) 75/R (D) 80/R

Last Answer : Answer: Option C

Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Description : Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Last Answer : Answer: Option D

The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Description : The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Last Answer : (c) 70 to 80%

The percentage of alumina and silica in good fire clay vary respectively is (A) 25, 75 (B) 30, 70 (C) 35, 65 (D) All of these

Description : The percentage of alumina and silica in good fire clay vary respectively is (A) 25, 75 (B) 30, 70 (C) 35, 65 (D) All of these

Last Answer : Answer: Option A

A retailer of Real Dry deodorant prices a can at £2.00; it cost the retailer £1.40. What is the, markup as a percentage of the selling price? A)3.0 percent B)30 percent C)70.0 percent D)20.0 percent

Description : A retailer of Real Dry deodorant prices a can at £2.00; it cost the retailer £1.40. What is the, markup as a percentage of the selling price? A)3.0 percent B)30 percent C)70.0 percent D)20.0 percent

Last Answer : B)30 percent

Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Description : Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (B) 50

What is the active agent in most home (night guard) bleaching solutions? a. 2-5% carbamide peroxide b. 10 - 15% Phosphoric acid c. 10 - 15% carbamide peroxide d. 35% hydrogen peroxide e. 5 - 10% citric acid Attention:

Description : What is the active agent in most home (night guard) bleaching solutions? a. 2-5% carbamide peroxide b. 10 - 15% Phosphoric acid c. 10 - 15% carbamide peroxide d. 35% hydrogen peroxide e. 5 - 10% citric acid Attention:

Last Answer : c. 10 - 15% carbamide peroxide

Catalyst used in the isomerisation is (A) Aluminium chloride (B) Alumina (C) Nickel (D) Phosphoric acid

Description : Catalyst used in the isomerisation is (A) Aluminium chloride (B) Alumina (C) Nickel (D) Phosphoric acid

Last Answer : (A) Aluminium chloride

Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Last Answer : (A) Phosphoric acid on kieselguhr

Platinum and silver are corroded by (A) Caustic soda solution (B) Phosphoric acid (C) Sulphuric acid (10%) (D) None of these

Description : Platinum and silver are corroded by (A) Caustic soda solution (B) Phosphoric acid (C) Sulphuric acid (10%) (D) None of these

Last Answer : (D) None of these