Potential flow is characterised by the (A) Irrotational and frictionless flow(B) Irrotational and frictional flow(C) One in which dissipation of mechanical energy into heat occurs(D) Formation of eddies within the stream

Potential flow is characterised by the
(A) Irrotational and frictionless flow
(B) Irrotational and frictional flow
(C) One in which dissipation of mechanical energy into heat occurs
(D) Formation of eddies within the stream
by

1 Answer

Answer :

(A) Irrotational and frictionless flow
by

Related questions

Laminar flow is characterised by the nonexistence of (A) Pressure fluctuation(B) Eddies(C) Deviating velocities(D) All (A), (B) & (C)

Description : Laminar flow is characterised by the nonexistence of (A) Pressure fluctuation (B) Eddies (C) Deviating velocities (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Bernoulli's equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli's equation? A. Fluid flow is frictionless & irrotational. B. Fluid flow is steady. C. Fluid flow is uniform & turbulent. D. Fluid is compressible. E. Fluid is incompressible. (A) A, C, D (B) B, D, E (C) A, B, E (D) A, D, E

Description : Bernoulli's equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli's equation? A. Fluid flow is frictionless & irrotational. B. Fluid flow is ... A, C, D (B) B, D, E (C) A, B, E (D) A, D, E

Last Answer : (C) A, B, E

The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Description : The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Last Answer : c. Frictional movement of a particle over a surface

The Stoke's stream function applies to the (A) Irrotational flow only (B) Ideal/non i viscous fluids only (C) Cases of axial symmetry (D) None of these

Description : The Stoke's stream function applies to the (A) Irrotational flow only (B) Ideal/non i viscous fluids only (C) Cases of axial symmetry (D) None of these

Last Answer : (C) Cases of axial symmetry

Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Description : Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Last Answer : (A) A forced vortex occurs when fluid rotates as a solid about an axis

The purpose of lubrication in an antifriction bearing is (a) to reduce the friction between balls and races (b) dissipation of frictional heat prevention of corrosion (c) protection of the bearing from dirt and other foreign particles (d) all of the mentioned

Description : The purpose of lubrication in an antifriction bearing is (a) to reduce the friction between balls and races (b) dissipation of frictional heat prevention of corrosion (c) protection of the bearing from dirt and other foreign particles (d) all of the mentioned

Last Answer : (d) all of the mentioned

Potential function is applicable only for __________ flow. (A) Irrotational (B) Turbulent (C) Steady (D) None of these

Description : Potential function is applicable only for __________ flow. (A) Irrotational (B) Turbulent (C) Steady (D) None of these

Last Answer : (A) Irrotational

Heat transfer in the laminar sub-layer in case of a liquid flowing through a pipe, is mostly by (A) Eddies current (B) Conduction (C) Convection (D) None of these

Description : Heat transfer in the laminar sub-layer in case of a liquid flowing through a pipe, is mostly by (A) Eddies current (B) Conduction (C) Convection (D) None of these

Last Answer : (B) Conduction

Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Description : Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Last Answer : (B) 25

If in a flow field, between any two points, then the flow must be (A) Steady, incompressible, irrotational (B) Steady, compressible, irrotational (C) Steady, compressible and along a streamline

Description : If in a flow field, between any two points, then the flow must be (A) Steady, incompressible, irrotational (B) Steady, compressible, irrotational (C) Steady, compressible and along a streamline

Last Answer : (A) Steady, incompressible, irrotational

Bernoulli's equation is not applicable, when the flow is (A) Irrotational (B) Incompressible(C) Viscous(D) All (A), (B) & (C

Description : Bernoulli's equation is not applicable, when the flow is (A) Irrotational (B) Incompressible (C) Viscous (D) All (A), (B) & (C

Last Answer : (D) All (A), (B) & (C)

Bernoulli's equation for steady, frictionless, continuous flow states that the __________ at all sections is same. (A) Total pressure (B) Total energy (C) Velocity head (D) None of these

Description : Bernoulli's equation for steady, frictionless, continuous flow states that the __________ at all sections is same. (A) Total pressure (B) Total energy (C) Velocity head (D) None of these

Last Answer : (B) Total energy

Bernoulli's equation describes the (A) Mechanical energy balance in potential flow (B) Kinetic energy balance in laminar flow (C) Mechanical energy balance in turbulent flow (D) Mechanical energy balance in boundary layer

Description : Bernoulli's equation describes the (A) Mechanical energy balance in potential flow (B) Kinetic energy balance in laminar flow (C) Mechanical energy balance in turbulent flow (D) Mechanical energy balance in boundary layer

Last Answer : (A) Mechanical energy balance in potential flow

The divergent portion of a Venturimeter is made longer than convergent portion in order to (A) Avoid the tendency of breaking away the stream of liquid (B) To minimise frictional losses (C) Both (A) and (B) (D) None of these

Description : The divergent portion of a Venturimeter is made longer than convergent portion in order to (A) Avoid the tendency of breaking away the stream of liquid (B) To minimise frictional losses (C) Both (A) and (B) (D) None of these

Last Answer : Answer: Option C

When an isolated thermodynamic system executes a process, (A) Work is done (B) Heat transfer takes place (C) Mass flow occurs across the boundary of the system (D) No chemical reaction takes place within the system

Description : When an isolated thermodynamic system executes a process, (A) Work is done (B) Heat transfer takes place (C) Mass flow occurs across the boundary of the system (D) No chemical reaction takes place within the system

Last Answer : D) No chemical reaction takes place within the system

Choose the best definition of dielectric loss. a) Absorption of electric energy by dielectric in an AC field b) Dissipation of electric energy by dielectric in a static field c) Dissipation of heat by dielectric d) Product of loss tangent and relative permittivity

Description : Choose the best definition of dielectric loss. a) Absorption of electric energy by dielectric in an AC field b) Dissipation of electric energy by dielectric in a static field c) Dissipation of heat by dielectric d) Product of loss tangent and relative permittivity

Last Answer : a) Absorption of electric energy by dielectric in an AC field

Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal to that leaving the Venturimeter(B) Discharge of fluid through a Venturimeter depends upon the gagedifference irrespective of the orientation of Venturimeter(C) Venturimeter occupies less space than an orificemeter(D) Venturimeter incurs less power loss compared to an equivalentorificemeter

Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter

Last Answer : (C) Venturimeter occupies less space than an orificemeter

In an incompressible flow of fluid, the fluid (A) Temperature remains constant (B) Compressibility is greater than zero (C) Density does not change with pressure & temperature (D) Is frictionless

Description : In an incompressible flow of fluid, the fluid (A) Temperature remains constant (B) Compressibility is greater than zero (C) Density does not change with pressure & temperature (D) Is frictionless

Last Answer : (C) Density does not change with pressure & temperature

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

What happens when a chemical bond is formed? (1) energy is always absorbed (2) energy in always released (3) more energy is released than is absorbed (4) energy is neither released nor absorbed Correct (4) Answer – (1) energy is always absorbed Explanation: If a bond is broken, energy is released; and if a bond is formed, energy must have been absorbed. As these occur, a change in the chemical energy of the system also occurs. Within each bond of a molecule is an experimentally determined amount of enemy that upon the breaking of that bond is released into the chemical system. The energy within these bonds are 'stored' and can be easily thought of as potential energy. Upon the breaking of these bonds the energy is released thereby creating usable energy.

Description : What happens when a chemical bond is formed? (1) energy is always absorbed (2) energy in always released (3) more energy is released than is absorbed (4) energy is neither released nor ... as potential energy. Upon the breaking of these bonds the energy is released thereby creating usable energy.

Last Answer : Silver nitrate solution is kept in brown bottles in laboratory because - (1) it reacts with ordinary white bottles (2) brown bottles stops the passage of light through it (3) brown bottles do not react with it (4) brown bottles react with it

A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Description : A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Last Answer : Ans :c

Total mechanical losses ( frictional losses , pumping loss in intake and exhaust and power accessories) will amount to a.10-20 % ihp b.2-10 % ihp c.20-30 % ihp d.30 -50 % ihp

Description : Total mechanical losses ( frictional losses , pumping loss in intake and exhaust and power accessories) will amount to a.10-20 % ihp b.2-10 % ihp c.20-30 % ihp d.30 -50 % ihp

Last Answer : a.10-20 % ihp

The heated parts of an electrical machine dissipate heat into their surroundings by which of the following modes of heat dissipation ? (a) Conduction (b) Convection (c) Radiation (d) All ofthe above

Description : The heated parts of an electrical machine dissipate heat into their surroundings by which of the following modes of heat dissipation ? (a) Conduction (b) Convection (c) Radiation (d) All ofthe above

Last Answer : (d) All ofthe above

Mechanical energy is the combination of kinetic energy and _______. (1) Heat energy (2) Chemical energy (3) Potential energy (4) Nuclear energy

Description : Mechanical energy is the combination of kinetic energy and _______. (1) Heat energy (2) Chemical energy (3) Potential energy (4) Nuclear energy

Last Answer : (3) Potential energy Explanation: Mechanical energy is the energy possessed by an object due to either its motion or its stored energy of position. The total amount of mechanical energy is merely the sum of potential energy and kinetic energy.

When brakes are applied on a moving vehicle the kinetic energy is converted to A. Mechanical energy B. Heat energy C. Electrical energy D. Potential energy

Description : When brakes are applied on a moving vehicle the kinetic energy is converted to A. Mechanical energy B. Heat energy C. Electrical energy D. Potential energy

Last Answer : B. Heat energy

Superconductivity is a material property associated with - (1) cooling a substance without a phase change (2) frictionless liquid flow (3) a loss of thermal resistance (4) a loss of electrical resistance

Description : Superconductivity is a material property associated with - (1) cooling a substance without a phase change (2) frictionless liquid flow (3) a loss of thermal resistance (4) a loss of electrical resistance

Last Answer : (3) a loss of thermal resistance Explanation: Superconductivity is a phenomenon of exactly zero electrical resistance and expulsion of magnetic flux fields occurring in certain materials, called superconductors.

A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero.  A. Isentropic flow  B. Isobaric flow  C. Steady flow  D. Uniform flow

Description : A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero.  A. Isentropic flow  B. Isobaric flow  C. Steady flow  D. Uniform flow

Last Answer : Isentropic flow

The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Description : The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Last Answer : (B) Increasing temperatures both on the surface and within the solid

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

A fluid element has a velocity V = -y 2 . xi + 2yx 2 . j. The motion at (x, y) = (1/√2, 1) is (A) Rotational and incompressible (B) Rotational and compressible (C) Irrotational and compressible (D) Irrotational and incompressible

Description : A fluid element has a velocity V = -y 2 . xi + 2yx 2 . j. The motion at (x, y) = (1/√2, 1) is (A) Rotational and incompressible (B) Rotational and compressible (C) Irrotational and compressible (D) Irrotational and incompressible

Last Answer : (B) Rotational and compressible

What new breakthrough in mobile phone heat dissipation: successfully developed 0.3mm ultra-thin VC soaking plate with 5W heat dissipation power?

Description : What new breakthrough in mobile phone heat dissipation: successfully developed 0.3mm ultra-thin VC soaking plate with 5W heat dissipation power?

Last Answer : iBee Parts - Professional Factory Supplier For iPhone Samsung Huawei LCD Screen & Battery Repair Parts Replacement. Following heat pipe heat dissipation, VC heat sink technology has ... first domestic company to adopt precision etching microstructure integrated capillary core technology, and the

What is heat dissipation ?

Last Answer : dissipation reaction is when a compound breaks down into one or more compounds or elements by applying heat. For example: PCl5 + heat = PCl3 + PCl2

Unnecessary and frequent applications of varnish to the generator windings to repair defective insulation will result in ____________. A. heavy coatings of varnish interfering with heat dissipation B. deficient air gap clearance and eventual damage to the casing C. failure of the rectifier assembly D. a built-up of varnish without changing generator operation

Description : Unnecessary and frequent applications of varnish to the generator windings to repair defective insulation will result in ____________. A. heavy coatings of varnish interfering with heat dissipation B. ... of the rectifier assembly D. a built-up of varnish without changing generator operation

Last Answer : Answer: A

How the heat dissipation is improved by providing the cooling tubes?

Description : How the heat dissipation is improved by providing the cooling tubes?

Last Answer : The cooling tubes will improve the circulation of oil. The circulation of oil is due to effective pressure heads produced by columns of oil in tubes. The improvement in cooling is accounted by taking the specific heat dissipation due to convection as 35% more than that without tubes.

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Last Answer : B. absorption loss

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Last Answer : absorption loss

The mcrease in heat dissipation by air blasts is due to increase in (a) conduction (b) convection (e) radiation (d) any ofthe above

Description : The mcrease in heat dissipation by air blasts is due to increase in (a) conduction (b) convection (e) radiation (d) any ofthe above

Last Answer : (b) convection

A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 - 1 shell and tube heat exchanger is available. The best arrangement is (A) Counter flow with process stream on shell side (B) Counter flow with process stream on tube side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Description : A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 ... side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Last Answer : (A) Counter flow with process stream on shell side

The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Description : The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Last Answer : (3) to reduce heat loss by radiation Explanation: Polished surfaces are poor radiators of heat. So loss of heat on that account is reduced and the electric iron remains hotter than otherwise.

The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Description : The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Last Answer : (3) to reduce heat loss by radiation Explanation: Polished surfaces are poor radiators of heat. So loss of heat on that account is reduced and the electric iron remains hotter than otherwise.

In frictional fluid flow, the quantity, (P/ρ) + (V 2 /2gc) + gz/gc) is (A) Constant along a streamline (B) Not constant along a streamline (C) Increased in the direction of flow (D) None of these

Description : In frictional fluid flow, the quantity, (P/ρ) + (V 2 /2gc) + gz/gc) is (A) Constant along a streamline (B) Not constant along a streamline (C) Increased in the direction of flow (D) None of these

Last Answer : (B) Not constant along a streamline

The frictional resistance in laminar flow does not depend on the (A) Area of surface in contact (B) Flow velocity (C) Fluid temperature (D) Pressure of flow

Description : The frictional resistance in laminar flow does not depend on the (A) Area of surface in contact (B) Flow velocity (C) Fluid temperature (D) Pressure of flow

Last Answer : (A) Area of surface in contact

Boundary layer separation is characterised by one of the conditions given below, where 'Re' is the Reynolds number for the flow. Select the appropriate conditions. (A) Re << 1, accelerating flow (B) Re >> 1, accelerating flow (C) Re << 1, decelerating flow (D) Re >>1, decelerating flow

Description : Boundary layer separation is characterised by one of the conditions given below, where 'Re' is the Reynolds number for the flow. Select the appropriate conditions. (A) Re > 1, accelerating flow (C) Re >1, decelerating flow

Last Answer : (D) Re >>1, decelerating flow

Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces(B) A hydrometer used for the determination of specific gravities of liquidsworks on the principle of buoyant forces(C) In case of unsteady fluid flow, the velocity at any given point does notchange with time(D) Turbulent fluid flow is characterised by the rapid fluctuation ofinstantaneous pressure & velocity at a poin

Description : Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces (B) A hydrometer used for the determination of ... Turbulent fluid flow is characterised by the rapid fluctuation of instantaneous pressure & velocity at a poin

Last Answer : (C) In case of unsteady fluid flow, the velocity at any given point does not change with time

A plug-flow reactor is characterised by (A) High capacity (B) Presence of axial mixing (C) Presence of lateral mixing (D) Constant composition and temperature of reaction mixture

Description : A plug-flow reactor is characterised by (A) High capacity (B) Presence of axial mixing (C) Presence of lateral mixing (D) Constant composition and temperature of reaction mixture

Last Answer : (C) Presence of lateral mixing

During which stage or phase of bone healing after fracture is devitalized tissue removed and new bone reorganized into its former structural arrangement? a) Remodeling Remodeling is the final stage of fracture repair. b) Inflammation During inflammation, macrophages invade and debride the fracture area. c) Revascularization Revascularization occurs within about 5 days after the fracture. d) Reparative Callus formation occurs during the reparative stage but is disrupted by excessive motion at the fracture site.

Description : During which stage or phase of bone healing after fracture is devitalized tissue removed and new bone reorganized into its former structural arrangement? a) Remodeling Remodeling is the final stage of ... occurs during the reparative stage but is disrupted by excessive motion at the fracture site.

Last Answer : a) Remodeling Remodeling is the final stage of fracture repair.

During which stage or phase of bone healing after fracture does callus formation occur? a) Reparative Callus formation occurs during the reparative stage but is disrupted by excessive motion at the fracture site b) Remodeling Remodeling is the final stage of fracture repair during which the new bone is reorganized into the bone’s former structural arrangement. c) Inflammation During inflammation, macrophages invade and debride the fracture area. d) Revascularization Revascularization occurs within about 5 days after the fracture.

Description : During which stage or phase of bone healing after fracture does callus formation occur? a) Reparative Callus formation occurs during the reparative stage but is disrupted by excessive motion ... the fracture area. d) Revascularization Revascularization occurs within about 5 days after the fracture.

Last Answer : a) Reparative Callus formation occurs during the reparative stage but is disrupted by excessive motion at the fracture site

7. Which of the following statements is/are true? a. Business Investment Spending occurs when individuals buy stock in the stock market b. Productivity is the United States grew very slowly between 1973 and 1996 c. Because of discouraged workers, the official unemployment rate is too high d. “Full employment” occurs when there is no frictional unemployment

Description : 7. Which of the following statements is/are true? a. Business Investment Spending occurs when individuals buy stock in the stock market b. Productivity is the United States grew very slowly ... unemployment rate is too high d. Full employment occurs when there is no frictional unemployment

Last Answer : b. Productivity is the United States grew very slowly between 1973 and 1996

Match List-I (Type of Unemployment) with List-II (Characteristics) and select the correct answer using the codes given below: L ist-I L ist -I I (Type of (Char acter ist ics) Unem ployment ) A. Seasonal I. Occurs during boom or recession in the economy B. Frictional II. An absence of demand for a certain type of workers C. Disguised III. Occurs when moving from one job to another D. Structural IV. Actual contribution by the additional labour is nil E. Cyclical V. Job opportunities during certain months in the year

Description : Match List-I (Type of Unemployment) with List-II (Characteristics) and select the correct answer using the codes given below: L ist-I L ist -I I (Type of (Char acter ist ics) Unem ... contribution by the additional labour is nil E. Cyclical V. Job opportunities during certain months in the year

Last Answer : (1) A-V, B-III, C-IV, D-II, E-I