What new breakthrough in mobile phone heat dissipation: successfully developed 0.3mm ultra-thin VC soaking plate with 5W heat dissipation power?

What new breakthrough in mobile phone heat dissipation: successfully developed 0.3mm ultra-thin VC soaking plate with 5W heat dissipation power?
by

1 Answer

Answer :

iBee Parts - Professional Factory Supplier For iPhone Samsung Huawei LCD Screen & Battery Repair Parts Replacement.　   Following heat pipe heat dissipation, VC heat sink technology has been widely used in mid-to-high-end mobile phones . Its biggest advantage is thinness, because mobile phones have increasingly higher requirements for internal space. Recently, the 0.3mm ultra-thin VC soaking plate was successfully developed and reached a stable process level that can be mass-produced.OFILM develops the industry's thinnest VC soaking plate　  According to reports, OFILM breaks through the traditional structure of laying copper mesh or copper powder sintered capillary core. It is the first domestic company to adopt precision etching microstructure integrated capillary core technology, and the
by

Related questions

direct shear test possesses the following disadvantage: (A) A relatively thin thickness of sample permits quick drainage (B) A relatively thin thickness of sample permits quick dissipation of pore pressure developed during the test (C) As the test progresses the area under shear, gradually changes (D) None of these

Description : direct shear test possesses the following disadvantage: (A) A relatively thin thickness of sample permits quick drainage (B) A relatively thin thickness of sample permits quick dissipation of pore pressure ... C) As the test progresses the area under shear, gradually changes (D) None of these

Last Answer : Answer: Option C

A major breakthrough in the studies of cells came with the development of electron microscope. This is because (a) the electron microscope is more powerful than the light microscope as it uses a beam of electrons which has wavelength much longer than that of photons (b) the resolving power of the electron microscope is much higher than that of the light microscope (c) the resolving power of the electron microscope is 200 - 350 nm as compared to 0.1 - 0.2 nm for the light microscope (d) electron beam can pass through thick materials, whereas light microscopy requires thin sections.

Description : A major breakthrough in the studies of cells came with the development of electron microscope. This is because (a) the electron microscope is more powerful than the light microscope as it ... (d) electron beam can pass through thick materials, whereas light microscopy requires thin sections.

Last Answer : (b) the resolving power of the electron microscope is much higher than that of the light microscope

Will I get good results using a flush trim router bit on 3mm carbon fiber plate?

Description : Will I get good results using a flush trim router bit on 3mm carbon fiber plate?

Last Answer : Carbon fiber composite edges will not mangle like Kevlar. It cuts more like fiberglass but downward forces could cause delamination. If you can trap the edges between two layers of support material, you ... . That way particles finer than the bag mesh won't get breathed in by the machinists.

This DRDO lab has successfully launched imported pilot-less target aircraft (PTA)- KD2R5 utilising Mobile Hydro-Pneumatic Launcher (MHPL) developed for ‘Nishant’ UAV (a) VRDE (b) R&DE(E) (c) ADRDE (d) HEMRL

Description : This DRDO lab has successfully launched imported pilot-less target aircraft (PTA)- KD2R5 utilising Mobile Hydro-Pneumatic Launcher (MHPL) developed for ‘Nishant’ UAV (a) VRDE (b) R&DE(E) (c) ADRDE (d) HEMRL

Last Answer : (d) HEMRL

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Last Answer : B. absorption loss

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Last Answer : absorption loss

Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Description : Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Last Answer : (B) 25

A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement

Description : A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement

Last Answer : B. Take a new impression and make new crown

When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Description : When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Last Answer : B. Remake a new crown

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Description : In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Last Answer : (i) +0.5mm, -0 mm in vertical *

A thin, flat & square plate measuring 2 m × 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will remain constant at 30°C, if the convective heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Last Answer : (B) 100

What do you do during the pre reading stage use the 5w organizer?

Description : What do you do during the pre reading stage use the 5w organizer?

Last Answer : Survey the headings and subheadings of the text and ask the fiveW questions.

Solve the equation -5w=-65?

Description : Solve the equation -5w=-65?

Last Answer : 60

What sound intensity corresponds to a sound-intensity level of 50dB? A. 1 x 10-6W/m2 B. 1 x 10-7W/m2 C. 1 x 10-8W/m2 D.1 x 10-5W/m2

Description : What sound intensity corresponds to a sound-intensity level of 50dB? A. 1 x 10-6W/m2 B. 1 x 10-7W/m2 C. 1 x 10-8W/m2 D.1 x 10-5W/m2

Last Answer : B. 1 x 10-7W/m2

Which of the following statements is incorrect? A. You should leverage the 5W (+1H) technique to plan and design a dashboard. B. Google Data Studio, Kilpfolio, and Tableau are some tools that help you create effective dashboards. C. You should provide usability-related (heuristics) recommendations without actual data in your dashboards. D. Designing an effective dashboard (or report) is similar to developing a website.

Description : Which of the following statements is incorrect? A. You should leverage the 5W (+1H) technique to plan and design a dashboard. B. Google Data Studio, Kilpfolio, and Tableau are some tools ... your dashboards. D. Designing an effective dashboard (or report) is similar to developing a website.

Last Answer : C. You should provide usability-related (heuristics) recommendations without actual data in your dashboards

When four resistances of 2W 1W; 5W 2W; 10W 5W and 15W 10 W are connected in parallel,

Description : When four resistances of 2W 1W; 5W 2W; 10W 5W and 15W 10 W are connected in parallel, the greatest power is absorbed by • 2 W, 1 W • 5 W, 2 W • 10 W, 5W • 15 W, 10 W

Last Answer : When four resistances of 2W 1W; 5W 2W; 10W 5W and 15W 10 W are connected in parallel, the greatest power is absorbed by 2 W, 1 W

Will the next 'ultra portable' mac be a thin client?

Description : Will the next 'ultra portable' mac be a thin client?

Last Answer : answer:I dont think you should wait if you want a PMP. First of all, the Apple ultra-portable will reportedly be worth around $ 1500 (according to a bunch of sources). You can get a ... the night before the day of the actual announcement but even he is not allowed to disclose that information)

What is bigger 0.3mm or 0.13mm?

Description : What is bigger 0.3mm or 0.13mm?

Last Answer : The first one.

The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Description : The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Last Answer : b. 6mm ( ¼ inch)

The gap between probing face and probing shoe should be. (i) 0.4 mm (ii) 0.2mm * (iii) 3mm (iv) 1mm.

Description : The gap between probing face and probing shoe should be. (i) 0.4 mm (ii) 0.2mm * (iii) 3mm (iv) 1mm.

Last Answer : (ii) 0.2mm *

What is heat dissipation ?

Last Answer : dissipation reaction is when a compound breaks down into one or more compounds or elements by applying heat. For example: PCl5 + heat = PCl3 + PCl2

Unnecessary and frequent applications of varnish to the generator windings to repair defective insulation will result in ____________. A. heavy coatings of varnish interfering with heat dissipation B. deficient air gap clearance and eventual damage to the casing C. failure of the rectifier assembly D. a built-up of varnish without changing generator operation

Description : Unnecessary and frequent applications of varnish to the generator windings to repair defective insulation will result in ____________. A. heavy coatings of varnish interfering with heat dissipation B. ... of the rectifier assembly D. a built-up of varnish without changing generator operation

Last Answer : Answer: A

How the heat dissipation is improved by providing the cooling tubes?

Description : How the heat dissipation is improved by providing the cooling tubes?

Last Answer : The cooling tubes will improve the circulation of oil. The circulation of oil is due to effective pressure heads produced by columns of oil in tubes. The improvement in cooling is accounted by taking the specific heat dissipation due to convection as 35% more than that without tubes.

The purpose of lubrication in an antifriction bearing is (a) to reduce the friction between balls and races (b) dissipation of frictional heat prevention of corrosion (c) protection of the bearing from dirt and other foreign particles (d) all of the mentioned

Description : The purpose of lubrication in an antifriction bearing is (a) to reduce the friction between balls and races (b) dissipation of frictional heat prevention of corrosion (c) protection of the bearing from dirt and other foreign particles (d) all of the mentioned

Last Answer : (d) all of the mentioned

Choose the best definition of dielectric loss. a) Absorption of electric energy by dielectric in an AC field b) Dissipation of electric energy by dielectric in a static field c) Dissipation of heat by dielectric d) Product of loss tangent and relative permittivity

Description : Choose the best definition of dielectric loss. a) Absorption of electric energy by dielectric in an AC field b) Dissipation of electric energy by dielectric in a static field c) Dissipation of heat by dielectric d) Product of loss tangent and relative permittivity

Last Answer : a) Absorption of electric energy by dielectric in an AC field

Potential flow is characterised by the (A) Irrotational and frictionless flow(B) Irrotational and frictional flow(C) One in which dissipation of mechanical energy into heat occurs(D) Formation of eddies within the stream

Description : Potential flow is characterised by the (A) Irrotational and frictionless flow (B) Irrotational and frictional flow (C) One in which dissipation of mechanical energy into heat occurs (D) Formation of eddies within the stream

Last Answer : (A) Irrotational and frictionless flow

The mcrease in heat dissipation by air blasts is due to increase in (a) conduction (b) convection (e) radiation (d) any ofthe above

Description : The mcrease in heat dissipation by air blasts is due to increase in (a) conduction (b) convection (e) radiation (d) any ofthe above

Last Answer : (b) convection

The heated parts of an electrical machine dissipate heat into their surroundings by which of the following modes of heat dissipation ? (a) Conduction (b) Convection (c) Radiation (d) All ofthe above

Description : The heated parts of an electrical machine dissipate heat into their surroundings by which of the following modes of heat dissipation ? (a) Conduction (b) Convection (c) Radiation (d) All ofthe above

Last Answer : (d) All ofthe above

In furnaces operating at very high temperature (say) 1250°C, e.g. soaking pit), the maximum heat transfer takes place by (A) Conduction (B) Convection (C) Radiation (D) Cannot be predicted

Description : In furnaces operating at very high temperature (say) 1250°C, e.g. soaking pit), the maximum heat transfer takes place by (A) Conduction (B) Convection (C) Radiation (D) Cannot be predicted

Last Answer : (C) Radiation

Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Description : Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Last Answer : (A) By-product coke ovens

Minimum vertical clearance (VC) for a slab/ girder bridges with discharge of 0-30 cumecs is a) 300 mm b) 1500 mm c) 1800 mm d) 600 mm*

Description : Minimum vertical clearance (VC) for a slab/ girder bridges with discharge of 0-30 cumecs is a) 300 mm b) 1500 mm c) 1800 mm d) 600 mm*

Last Answer : d) 600 mm*

To announce the development of a new surgical breakthrough, a hospital management team feels it needs to get wide media coverage. Under these circumstances, which one of the following would probably be its best alternative? A)Captioned photograph B)Feature article C)Third party endorsement D)Television advertisement E)Press conference

Description : To announce the development of a new surgical breakthrough, a hospital management team feels it needs to get wide media coverage. Under these circumstances, which one of the following ... )Captioned photograph B)Feature article C)Third party endorsement D)Television advertisement E)Press conference

Last Answer : E)Press conference

What cars have this bolt pattern 5x114.3mm 5x4.5 inches?

Description : What cars have this bolt pattern 5x114.3mm 5x4.5 inches?

Last Answer : Acura, 1991-08AMC Eagle, 1989-93AMC, AMX, Concord, 1960-85Chrysler 300M, 1998-04Chrysler Concorde, 1993-04Chrysler Prowler, 1997-02Chrysler Sebring, 1995-08Chrysler Town and Country van, 1988-07Dodge ... full size car, 1957-77Ford Escape, 2001-08Ford Explorer, 1990-08And several hundred more.

What cars have this bolt pattern 5x114.3mm 5x4.5 inches?

Description : What cars have this bolt pattern 5x114.3mm 5x4.5 inches?

Last Answer : Acura, 1991-08AMC Eagle, 1989-93AMC, AMX, Concord, 1960-85Chrysler 300M, 1998-04Chrysler Concorde, 1993-04Chrysler Prowler, 1997-02Chrysler Sebring, 1995-08Chrysler Town and Country van, 1988-07Dodge ... full size car, 1957-77Ford Escape, 2001-08Ford Explorer, 1990-08And several hundred more.

If number of coils are 8 and wire diameter of spring 3mm, then solid length is given by? a) None of the listed b) 27mm c) 24mm d) 21mm

Description : If number of coils are 8 and wire diameter of spring 3mm, then solid length is given by? a) None of the listed b) 27mm c) 24mm d) 21mm

Last Answer : c) 24mm

A spherical pressure vessel is made of thin magnesium plate 0.25 cm thick. The main diameter of the sphere is 600 cm and allowable stress in tension is 900 kg/cm2. The safe internal gas pressure for the vessel would be a) 0.5 kg/cm2 b) 1.5 kg/cm2 c) 4.5 kg/cm2 d) 5.7 kg/cm2

Description : A spherical pressure vessel is made of thin magnesium plate 0.25 cm thick. The main diameter of the sphere is 600 cm and allowable stress in tension is 900 kg/cm2. The safe internal gas pressure for the vessel would be a) 0.5 kg/cm2 b) 1.5 kg/cm2 c) 4.5 kg/cm2 d) 5.7 kg/cm2

Last Answer : b) 1.5 kg/cm2

A ultra-super critical boiler was developed in the US in ……. a) 1950s b) 1970s c) 1960s d) 1940s

Description : A ultra-super critical boiler was developed in the US in ……. a) 1950s b) 1970s c) 1960s d) 1940s

Last Answer : a) 1950s

Do you know a lot of people who have or had a breakthrough case of COVID?

Description : Do you know a lot of people who have or had a breakthrough case of COVID?

Last Answer : What is a breakthrough case?

HRT patches... has anyone had breakthrough hot flushes while using patches?

Description : HRT patches... has anyone had breakthrough hot flushes while using patches?

Last Answer : I take it you mean hot flashes. I am using the patch also. It only means your doctor needs to adjust your dosage. Good luck! :-)

Have you ever been right on the edge of a positive emotional breakthrough? Did you get to the other side?

Description : Have you ever been right on the edge of a positive emotional breakthrough? Did you get to the other side?

Last Answer : answer:Yes and Yes. There were years I spent in a relationship I knew I would eventually leave but I was getting on my feet and he was actively supporting me in this. Friends and family would ask, how can ... , I know it's so uncool to make sacrifices these days but I can say mine were worth it.

What will Apple's next breakthrough product be?

Description : What will Apple's next breakthrough product be?

Last Answer : answer:An app called: how to say I don’t care without looking like a jerk. *I’m not techy. *But I do care that he passed away… Just not about another gadget

Name great thinkers/inventors/etc who had "breakthrough" during movements?

Description : Name great thinkers/inventors/etc who had "breakthrough" during movements?

Last Answer : The original “Eureka!” man—Archimedes—was stepping into a bath.

Must one REALLY have a breakdown before they can have a breakthrough??

Description : Must one REALLY have a breakdown before they can have a breakthrough??

Last Answer : I think he is full of shit. XD Not everyone has to go through major drama before they learn an important thing or overcome a problem ;)

What technology breakthrough are you looking forward to?

Description : What technology breakthrough are you looking forward to?

Last Answer : ask-publicing and tweeting from my brain. pure electric cars that are cheap and as reliable as gas vehicles. a netbook from apple.

Karl Lienstater discovered which medical breakthrough in 1901?

Description : Karl Lienstater discovered which medical breakthrough in 1901?

Last Answer : ABO Blood Groups

Was a significant technological breakthrough that occurred during the paleolithic era?

Description : Was a significant technological breakthrough that occurred during the paleolithic era?

Last Answer : What is the answer ?

What was the first transportation breakthrough resulting in increased availability of goods to consumers?

Description : What was the first transportation breakthrough resulting in increased availability of goods to consumers?

Last Answer : canals

Are you ready to try out this breakthrough bread baking equipment?

Description : Are you ready to try out this breakthrough bread baking equipment?

Last Answer : Many people enjoy making their own bread at home. We are sure your product is very interesting!