Bit stuffing refers to a. inserting a 0 in user stream to differentiate it with a flagb. inserting a 0 in flag stream to avoid ambiguity c. appending a nipple to the flag sequence d. appending a nipple to the use data stream

Bit stuffing refers to
a. inserting a 0 in user stream
to differentiate it with a flag
b. inserting a 0 in flag stream to
avoid ambiguity
c. appending a nipple to the flag
sequence
d. appending a nipple to the use
data stream
by

1 Answer

Answer :

a. inserting a 0 in user stream
to differentiate it with a flag
by

Related questions

To avoid ambiguity, the names assigned to machines must be carefully selected from a ______ with complete control over the binding between the names and IP addresses A. Table B. look up table C. name space D. name table

Description : To avoid ambiguity, the names assigned to machines must be carefully selected from a ______ with complete control over the binding between the names and IP addresses A. Table B. look up table C. name space D. name table

Last Answer : C. name space

Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Description : Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Last Answer : cyclic redundancy codes

A bit-stuffing based framing protocol uses an 8-bit delimiter pattern of 01111110. If the output bit-string after stuffing is 01111100101, then the input bit-string is a. 0111110100 b. 0111110101 c. 0111111101 d. 0111111111

Description : A bit-stuffing based framing protocol uses an 8-bit delimiter pattern of 01111110. If the output bit-string after stuffing is 01111100101, then the input bit-string is a. 0111110100 b. 0111110101 c. 0111111101 d. 0111111111

Last Answer : b. 0111110101

The system is notified of a read or write operation by ___________ a) Appending an extra bit of the address b) Enabling the read or write bits of the devices c) Raising an appropriate interrupt signal d) Sending a special signal along the BUS

Description : The system is notified of a read or write operation by ___________ a) Appending an extra bit of the address b) Enabling the read or write bits of the devices c) Raising an appropriate interrupt signal d) Sending a special signal along the BUS

Last Answer : Sending a special signal along the BUS

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Last Answer : a. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Last Answer : A. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Last Answer : all UDP packets are treated independently by transport layer

the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Description : the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Last Answer : b. 2^(n-1)

Which one of the following is a version of UDP with congestion control? a. datagram congestion control protocol b. stream control transmission protocol c. structured stream transport d. user congestion control protocol

Description : Which one of the following is a version of UDP with congestion control? a. datagram congestion control protocol b. stream control transmission protocol c. structured stream transport d. user congestion control protocol

Last Answer : a. datagram congestion control protocol

Which one of the following is a version of UDP with congestion control? a. datagram congestion control protocol b. stream control transmission protocol c. structured stream transport d. user congestion control protocol

Description : Which one of the following is a version of UDP with congestion control? a. datagram congestion control protocol b. stream control transmission protocol c. structured stream transport d. user congestion control protocol

Last Answer : a. datagram congestion control protocol

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

While inserting a diskette into the diskette drive of a PC, the diskette’s label side should face a. East b. North c. South d. Up

Description : While inserting a diskette into the diskette drive of a PC, the diskette’s label side should face a. East b. North c. South d. Up

Last Answer : Up

What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Description : What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Last Answer : B. Direct sequence

In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Description : In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Last Answer : c. Jam

........... a record means a new record to the file. A) Amending B) Updating C) Editing D) Appending

Description : ........... a record means a new record to the file. A) Amending B) Updating C) Editing D) Appending

Last Answer : D) Appending

Which of the following is not specifically required by the search engines? a. Poor user experience b. Keyword stuffing c. Buying links d. All of the above

Description : Which of the following is not specifically required by the search engines? a. Poor user experience b. Keyword stuffing c. Buying links d. All of the above

Last Answer : d. All of the above

Which of the following items search engines don't want? A. keyword stuffing B. buying links C. poor user experience D. All of the above

Description : Which of the following items search engines don't want? A. keyword stuffing B. buying links C. poor user experience D. All of the above

Last Answer : D. All of the above

Adding bits to synchronize one digital signal to another is called: a. bit stuffing b. bit-synch c. SDH d. WDM

Description : Adding bits to synchronize one digital signal to another is called: a. bit stuffing b. bit-synch c. SDH d. WDM

Last Answer : a. bit stuffing

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : isochronous

Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Last Answer : d. all of the mentioned

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Last Answer : d. all of the mentioned

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

Transport layer aggregates data from different applications into a single stream before passing it to ____________ A. network layer B. data link layer C. application layer D. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ A. network layer B. data link layer C. application layer D. physical layer

Last Answer : A. network layer

Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned

Description : Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned

Last Answer : d) all of the mentioned

12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Description : 12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Last Answer : c. 768 kbps

Report generatorsare usedto A. store data input bya user B. retrieve information from files C. answer queries D. both (b)and (c) E. None of the above

Description : Report generatorsare usedto A. store data input bya user B. retrieve information from files C. answer queries D. both (b)and (c) E. None of the above

Last Answer : both (b)and (c)

Which layers of the OSI determines the interface often system with the user? A) Network B) Application C) Data link D) Session

Description : Which layers of the OSI determines the interface often system with the user? A) Network B) Application C) Data link D) Session

Last Answer : B) Application

Which layer provides interface between network support layers and user support layers? a. session layer b. data link layer c. transport layer d. network layer

Description : Which layer provides interface between network support layers and user support layers? a. session layer b. data link layer c. transport layer d. network layer

Last Answer : c. transport layer

State weather the following statement is true or false for ISDN – Integrated Services Digital Network ISDN is an effort to standardize subscriber services, provide user/network interfaces 2). the goal of ISDN is to form a Local area network that provides Peer-to-Peer connectivity over digital media 3). It is a set of protocols that combines digital telephony and data transport services A. 1. True, 2. false, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Description : State weather the following statement is true or false for ISDN - Integrated Services Digital Network ISDN is an effort to standardize subscriber services, provide user/network interfaces 2). the goal of ISDN is to form a Local ... C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : A. 1. True, 2. false, 3. true

The data recording format in most of the modern magnetic tape is a. 7-bit ASCII b. 7-bit EBCDIC c. 8-bit ASCII d. 8-bit EBCDIC

Description : The data recording format in most of the modern magnetic tape is a. 7-bit ASCII b. 7-bit EBCDIC c. 8-bit ASCII d. 8-bit EBCDIC

Last Answer : 8-bit EBCDIC

The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Last Answer : DTE/DCE interface

High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Description : Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Simple parity check

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

The _____schemeuses data patterns of size 2 and encodes the 2-bit patterns as one signal element belonging to a four-level signal. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above

Description : The _____schemeuses data patterns of size 2 and encodes the 2-bit patterns as one signal element belonging to a four-level signal. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above

Last Answer : 2B1Q

The data rate is sometimes calledthe ___ rate. A) baud B) bit C) signal D) none of the above

Description : The data rate is sometimes calledthe ___ rate. A) baud B) bit C) signal D) none of the above

Last Answer : bit

The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

Description : The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

Last Answer : data; signal

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

The layer that transmits data in the form of bit streams using electrical and mechanicalsystems is in the OSI model. a. Physical layer b. Transport Layer c. Network Layer d. Data Link Layer

Description : The layer that transmits data in the form of bit streams using electrical and mechanicalsystems is in the OSI model. a. Physical layer b. Transport Layer c. Network Layer d. Data Link Layer

Last Answer : a. Physical layer

The arranging of data in a logical sequence is calleda. Sortingb. Classifyingc. Reproducingd. Summarizing

Description : The arranging of data in a logical sequence is called a. Sorting b. Classifying c. Reproducing d. Summarizing

Last Answer : Sorting

An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Description : An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Last Answer : Frame check sequence

Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception of acknowledgement? a. Provision of sequence number in the header of message b. Provision of checksum computation c. Both a & b d. None of the above

Description : Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception ... message b. Provision of checksum computation c. Both a & b d. None of the above

Last Answer : Provision of sequence number in the header of message

______ refers to the physical or logicalarrangement of a network. A) Data flow B) Mode ofoperation C) Topology D) None of the above

Description : ______ refers to the physical or logicalarrangement of a network. A) Data flow B) Mode ofoperation C) Topology D) None of the above

Last Answer : Topology

______ refers totwo characteristics: when data should be sent and how fast it can be sent. A) Semantics B) Syntax C) Timing D) none of the above

Description : ______ refers totwo characteristics: when data should be sent and how fast it can be sent. A) Semantics B) Syntax C) Timing D) none of the above

Last Answer : Timing

_____ refers tothe structure or format of the data, meaning the order in which they are presented. A) Semantics B) Syntax C) Timing D) All of theabove

Description : _____ refers tothe structure or format of the data, meaning the order in which they are presented. A) Semantics B) Syntax C) Timing D) All of theabove

Last Answer : Syntax

The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can receive and send datasimultaneously C. can sendor receive data one ata time D. can do one way data transmission only E. None of the above

Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above

Last Answer : can do one way data transmission only