For every 10% increase in the excess air; the fuel consumption increases by __________ percent. (A) 0.1 (B) 0.2 (C) 0.5 (D) 1.0

For every 10% increase in the excess air; the fuel consumption
increases by __________ percent.
(A) 0.1
(B) 0.2
(C) 0.5
(D) 1.0
by

1 Answer

Answer :

(A) 0.1
by

Related questions

As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Description : As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Last Answer : (B) Increases

Too much of excess air in combustion results in high (A) Fuel consumption for the same heat load (B) Stack gas temperature (C) Percentage of oxygen in flue gases (D) All (A), (B) and (C)

Description : Too much of excess air in combustion results in high (A) Fuel consumption for the same heat load (B) Stack gas temperature (C) Percentage of oxygen in flue gases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

High excess air in combustion of fuels results in (A) Increased fuel consumption (B) Incomplete combustion (C) Smoky flame (D) None of these

Description : High excess air in combustion of fuels results in (A) Increased fuel consumption (B) Incomplete combustion (C) Smoky flame (D) None of these

Last Answer : (A) Increased fuel consumption

Sepsis causes a marked metabolic response. Which of the following statement(s) is/are true concerning the metabolic response to sepsis? a. Oxygen consumption is increased in the face of infection b. In a patient with a maximal metabolic rate secondary to trauma, the presence of infection will increase the rate further c. Metabolic rate increases at a rate of approximately 10% for each increase of 1°C in central temperature d. The extent of increase in oxygen consumption relates to the severity of the infection

Description : Sepsis causes a marked metabolic response. Which of the following statement(s) is/are true concerning the metabolic response to sepsis? a. Oxygen consumption is increased in the face of infection ... d. The extent of increase in oxygen consumption relates to the severity of the infection

Last Answer : Answer: a, c, d Oxygen consumption is usually elevated in the infected patient. The extent of this increase is related to the severity of the infection, with peak elevations reaching 50% ... suggest that the metabolic rate increases 10% to 13% for each elevation of 1°C in central temperature

Use of economiser in a boiler plant reduces the fuel consumption for steam generation by about __________ percent. (A) 1 (B) 10 (C) 30 (D) 50

Description : Use of economiser in a boiler plant reduces the fuel consumption for steam generation by about __________ percent. (A) 1 (B) 10 (C) 30 (D) 50

Last Answer : (B) 10

The excess air required for the combustion of pulverised coal is of the order of about __________ percent. (A) 5 (B) 15 (C) 30 (D) 45

Description : The excess air required for the combustion of pulverised coal is of the order of about __________ percent. (A) 5 (B) 15 (C) 30 (D) 45

Last Answer : (B) 15

Furnace oil consumption in a furnace for a given duty employing preheated combination air (at 300°) may be reduced by about __________ percent as compared to the use of atmospheric combustion air. (A) 5 (B) 10 (C) 20 (D) 35

Description : Furnace oil consumption in a furnace for a given duty employing preheated combination air (at 300°) may be reduced by about __________ percent as compared to the use of atmospheric combustion air. (A) 5 (B) 10 (C) 20 (D) 35

Last Answer : (C) 20

Oxygen content in a flue gas was found to be 4%. It implies that excess air used for combustion was around __________ percent. (A) 4 (B) 96 (C) 20 (D) 40

Description : Oxygen content in a flue gas was found to be 4%. It implies that excess air used for combustion was around __________ percent. (A) 4 (B) 96 (C) 20 (D) 40

Last Answer : (C) 20

Advantages of use of preheated combustion air are (A) Saving in fuel consumption (B) Reduction in scale losses (C) Increase in flame temperature (D) All (A), (B) and (C)

Description : Advantages of use of preheated combustion air are (A) Saving in fuel consumption (B) Reduction in scale losses (C) Increase in flame temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following advantages is not associated with the use of preheated air for combustion of a fuel in the furnace? (A) Increase in calorific value of the fuel (B) Increase in flame temperature (C) Reduction in scale losses (D) Saving in fuel consumption

Description : Which of the following advantages is not associated with the use of preheated air for combustion of a fuel in the furnace? (A) Increase in calorific value of the fuel (B) Increase in flame temperature (C) Reduction in scale losses (D) Saving in fuel consumption

Last Answer : (A) Increase in calorific value of the fuel

Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace. (A) Low amount of excess combustion air (B) Large quantity of excess combustion air(C) Hydrocarbon fuel(D) Pulverised coal as fuel

Description : Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace. (A) Low amount of excess combustion air (B) Large quantity of excess combustion air (C) Hydrocarbon fuel (D) Pulverised coal as fuel

Last Answer : (A) Low amount of excess combustion air

'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost. (A) 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Last Answer : (B) 10 to 20

For every 4°C raise in air inlet temperature of an air compressor, the power consumption will increases by_____ a) 2% b) 1% c) 3% d) 4%

Description : For every 4°C raise in air inlet temperature of an air compressor, the power consumption will increases by_____ a) 2% b) 1% c) 3% d) 4%

Last Answer : b) 1%

How promising is the "air lubrication" idea to increase the speed of ships and reduce the consumption of fuel?

Description : How promising is the "air lubrication" idea to increase the speed of ships and reduce the consumption of fuel?

Last Answer : I think passive systems, like shark skin like surfaces, will be more promising than active systems, as those also consume energy. I am also not sure how the bubbles would affect the vessels buoyancy.

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Description : The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Last Answer : (C) 85

If the interest rate of 10% per period is compounded half yearly, the actual annual return on the principal will be __________ percent. (A) 10 (B) 20 (C) > 20 (D) < 20

Description : If the interest rate of 10% per period is compounded half yearly, the actual annual return on the principal will be __________ percent. (A) 10 (B) 20 (C) > 20 (D) < 20

Last Answer : (C) > 20

Identify the correct statement for air compressors. a. For every 5.5oC drop in the inlet air temperature, the increase in energy consumption is by 2%. b. For every 4 oC rise in the inlet air temperature, the decrease in energy consumption is by 1% c. For every 4 oC rise in the inter air temperature, the increase in energy consumption is by 1% d. The energy consumption remains same irrespective of inlet air temperature

Description : Identify the correct statement for air compressors. a. For every 5.5oC drop in the inlet air temperature, the increase in energy consumption is by 2%. b. For every 4 oC rise in ... increase in energy consumption is by 1% d. The energy consumption remains same irrespective of inlet air temperature 

Last Answer : c. For every 4 oC rise in the inter air temperature, the increase in energy consumption is by 1% 

An economiser in a boiler........ A]Increases steam pressure. B]Increases steam flow C]Decreases fuel consumption D]Decreases steam pressure

Description : An economiser in a boiler........ A]Increases steam pressure. B]Increases steam flow C]Decreases fuel consumption D]Decreases steam pressure

Last Answer : C]Decreases fuel consumption

How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Description : How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Last Answer : c. Decreases with a forward C of G

How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Description : How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Last Answer : c. Decreases with a forward C of G

A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6.26, CO : 1.56, O2 : 3.91, H2O :15.66, N2 : 72.60 (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02 (C) CO2 : 6.39, CO : 1.60, O2 : 3.99, H2O:25.96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Description : A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6 ... 96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Last Answer : (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02

Preheating of __________ the flame temperature. (A) The gaseous fuel before combustion decreases (B) Combustion air decreases (C) Either the fuel or the air or both, increases (D) Either the fuel or the air does not affect

Description : Preheating of __________ the flame temperature. (A) The gaseous fuel before combustion decreases (B) Combustion air decreases (C) Either the fuel or the air or both, increases (D) Either the fuel or the air does not affect

Last Answer : (C) Either the fuel or the air or both, increases

Overfire burning in a furnace is a phenomenon characterised by (A) Supply of excess fuel (B) Supply of excess air (C) Burning carbon monoxide and other incombustible in upper zone of furnace by supplying more air (D) None of these

Description : Overfire burning in a furnace is a phenomenon characterised by (A) Supply of excess fuel (B) Supply of excess air (C) Burning carbon monoxide and other incombustible in upper zone of furnace by supplying more air (D) None of these

Last Answer : (C) Burning carbon monoxide and other incombustible in upper zone of furnace by supplying more air

Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to volatile matter percentage in coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Description : Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to ... coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Last Answer : (D) Calorific value of natural gas is more than that of LPG

Use of excess of combustion air in the combustion of fuels results in (A) Heat losses (B) Long flame (C) Condensation of water vapour from the fuel gas (D) None of these

Description : Use of excess of combustion air in the combustion of fuels results in (A) Heat losses (B) Long flame (C) Condensation of water vapour from the fuel gas (D) None of these

Last Answer : (A) Heat losses

A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the (A) Presence of large quantity of hydrogen in the fuel (B) Low calorific value of the fuel (C) High sulphur content in the fuel (D) Lack of thorough mixing of fuel with air

Description : A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the (A) Presence of large ... fuel (C) High sulphur content in the fuel (D) Lack of thorough mixing of fuel with air

Last Answer : (D) Lack of thorough mixing of fuel with air

Short/intense flame is produced during combustion of gaseous fuel by using (A) High amount/current of combustion air(B) Low amount/current of combustion air(C) Preheated secondary air(D) Very little excess air

Description : Short/intense flame is produced during combustion of gaseous fuel by using (A) High amount/current of combustion air (B) Low amount/current of combustion air (C) Preheated secondary air (D) Very little excess air

Last Answer : (A) High amount/current of combustion air

A carbonaceous fuel (containing no H2 or hydrocarbons) is burnt and the resulting flue gas contains 21% CO2 . It means that (A) 21% excess air has been used for combustion (B) 21% excess oxygen has been used for combustion (C) Complete combustion of fuel has taken place (D) No excess air has been used for combustion

Description : A carbonaceous fuel (containing no H2 or hydrocarbons) is burnt and the resulting flue gas contains 21% CO2 . It means that (A) 21% excess air has been used for combustion (B) 21% excess oxygen has ... (C) Complete combustion of fuel has taken place (D) No excess air has been used for combustion

Last Answer : (C) Complete combustion of fuel has taken place

Supply of excess air for complete combustion of fuel is necessitated to facilitate (A) Its thorough mixing with air (B) Attainment of chemical equilibrium (C) Attainment of high temperature (D) None of these

Description : Supply of excess air for complete combustion of fuel is necessitated to facilitate (A) Its thorough mixing with air (B) Attainment of chemical equilibrium (C) Attainment of high temperature (D) None of these

Last Answer : (A) Its thorough mixing with air

Overfire burning" in a furnace is a phenomenon characterised by the (A) Supply of excess fuel (B) Supply of excess air (C) Burning of carbon monoxide and other incombustibles in upper zone of furnace by supplying more air (D) None of these

Description : Overfire burning" in a furnace is a phenomenon characterised by the (A) Supply of excess fuel (B) Supply of excess air (C) Burning of carbon monoxide and other incombustibles in upper zone of furnace by supplying more air (D) None of these

Last Answer : (C) Burning of carbon monoxide and other incombustibles in upper zone of furnace by supplying more air

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

The main drawback of supplying more excess air in the combustion of fuel is the (A) Excessive power requirement of air blower (B) Enhanced sensible heat loss in the flue gas (C) Intermittent and uncontrolled combustion of the fuel (D) High exit flue gas temperature from the furnace

Description : The main drawback of supplying more excess air in the combustion of fuel is the (A) Excessive power requirement of air blower (B) Enhanced sensible heat loss in the flue gas (C) Intermittent and uncontrolled combustion of the fuel (D) High exit flue gas temperature from the furnace

Last Answer : (B) Enhanced sensible heat loss in the flue gas

The optimum percentage of excess air for combustion depends upon the__________ of the fuel.(A) Type (solid, liquid or gaseous)(B) Calorific value(C) Sulphur content(D) Ignition temperature

Description : The optimum percentage of excess air for combustion depends upon the__________ of the fuel. (A) Type (solid, liquid or gaseous) (B) Calorific value (C) Sulphur content (D) Ignition temperature

Last Answer : (A) Type (solid, liquid or gaseous)

White smoke coming out of the chimney of a furnace indicates the useof(A) Low excess air(B) Very high excess air(C) Gaseous fuel in the furnace(D) Liquid fuel in the furnace

Description : White smoke coming out of the chimney of a furnace indicates the useof (A) Low excess air (B) Very high excess air (C) Gaseous fuel in the furnace (D) Liquid fuel in the furnace

Last Answer : (B) Very high excess air

Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that (A) Pure oxygen has been used for combustion (B) Nitrogen percentage in the fuel is very high (C) Excess air has been used for combustion (D) Hydrogen is not present in the fuel

Description : Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that (A) Pure oxygen has been used for combustion ... very high (C) Excess air has been used for combustion (D) Hydrogen is not present in the fuel

Last Answer : (C) Excess air has been used for combustion

In an isothermal process on an ideal gas, the pressure increases by 0.5 percent. The volume decreases by about __________ percent. (A) 0.25 (B) 0.5 (C) 0.75 (D) 1

Description : In an isothermal process on an ideal gas, the pressure increases by 0.5 percent. The volume decreases by about __________ percent. (A) 0.25 (B) 0.5 (C) 0.75 (D) 1

Last Answer : (B) 0.5

Sasi is a badham merchant in kerala. He has badham in sealed wooden boxes of 15kg each. The price of the badham increases by Rs.30 per kg for every year, but at the same time, 10% of the badham are eaten by rodents every year. If the price of a 1 kg of fresh badham is Rs.240, what is the change in his profits if he sells a sealed box after one year of storage, rather than selling it fresh ?( In Rs.)

Description : Sasi is a badham merchant in kerala. He has badham in sealed wooden boxes of 15kg each. The price of the badham increases by Rs.30 per kg for every year, but at the same time, 10% of the badham are ... if he sells a sealed box after one year of storage, rather than selling it fresh ?( In Rs.)

Last Answer : Price of 1kg fresh batham= Rs.240 Therefore, price of 15kg = Rs.15*240= 3600  10% of 15kg which eaten by rodents = 10 x 15/100 = 1.5kg.  So, End of Year he had 15kg - 1.5kg = 13.5kg So, ... box with badham for Rs.3600 and sell that for Rs. 3645  So, profit = 3645-3600= Rs.45 more money he get.

Combustion of fuel in a furnace with oxygen enriched air results in higher (A) Flue gas volume (B) Flame temperature (C) Fuel consumption (D) Stack loss

Description : Combustion of fuel in a furnace with oxygen enriched air results in higher (A) Flue gas volume (B) Flame temperature (C) Fuel consumption (D) Stack loss

Last Answer : (B) Flame temperature

Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Description : Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Last Answer : (B) Increases its consumption in the furnace

Pure carbon is completely burnt in oxygen. The flue gas analysis is 70%CO2 , 20%CO and 10%O2 . The percent excess oxygen used is (A) 20 (B) 12.5 (C) 0 (D) 10

Description : Pure carbon is completely burnt in oxygen. The flue gas analysis is 70%CO2 , 20%CO and 10%O2 . The percent excess oxygen used is (A) 20 (B) 12.5 (C) 0 (D) 10

Last Answer : (C) 0

Oxygen percentage in the flue gas coming out of a gaseous fuel fired furnace should be ideally about __________ percent. (A) < 2 (B) < 5 (C) < 8 (D) < 10

Description : Oxygen percentage in the flue gas coming out of a gaseous fuel fired furnace should be ideally about __________ percent. (A) < 2 (B) < 5 (C) < 8 (D) < 10

Last Answer : (A) < 2

Scavenging is usually done to increase the a. thermal efficiency b. speed c. power output d. fuel consumption

Description : Scavenging is usually done to increase the a. thermal efficiency b. speed c. power output d. fuel consumption

Last Answer : ANSWER c. power output

Heat recovery provides valuable energy sources and ....... consumption. a) Reduce energy b) Increase energy c) Increase fuel d) Reduce fuel

Description : Heat recovery provides valuable energy sources and ....... consumption. a) Reduce energy b) Increase energy c) Increase fuel d) Reduce fuel

Last Answer : Reduce energy

Velocity of flame propagation in SI engine is maximum for a fuel air mixture which is (a) 10% richer than stoichiometric (b) Equal to stoichiometric (c) More than 10% richer than stoichiometric (d) 10% leaner than stoichiometric

Description : Velocity of flame propagation in SI engine is maximum for a fuel air mixture which is (a) 10% richer than stoichiometric (b) Equal to stoichiometric (c) More than 10% richer than stoichiometric (d) 10% leaner than stoichiometric

Last Answer : Ans :a

Major sources of noise in furnace operation arises from air inspirators, combustion, side wall vibrations and fluctuation in the process heat load. A 50% increase in fuel firing rate may increase the furnace noise level by about __________ decibels. (A) 3 (B) 30(C) 7 (D) 70

Description : Major sources of noise in furnace operation arises from air inspirators, combustion, side wall vibrations and fluctuation in the process heat load. A 50% increase in fuel firing rate may increase the furnace noise level by about __________ decibels. (A) 3 (B) 30 (C) 7 (D) 70

Last Answer : (A) 3

Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is more than that of coarse sand (C) If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Description : Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is ... the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Last Answer : Answer: Option D

If the activity level increases 10%, total variable costs will A. remain the same B. increase by more than 10% C. decrease by less than 10% D. increase by10%

Description : If the activity level increases 10%, total variable costs will A. remain the same B. increase by more than 10% C. decrease by less than 10% D. increase by10%

Last Answer : D. increase by10%

Thermal nuclear reactors using enriched uranium as fuel contains a maximum of __________ percent fissile material i.e. U-235. (A) 1 (B) 2 (C) 3 (D) 7

Description : Thermal nuclear reactors using enriched uranium as fuel contains a maximum of __________ percent fissile material i.e. U-235. (A) 1 (B) 2 (C) 3 (D) 7

Last Answer : (C) 3

Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Description : Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Last Answer : (D) 85