Bomb calorimeter is used for the determination of calorific value of the
__________ fuels.
(A) Gaseous
(B) Solid
(C) Liquid
(D) Both (B) and (C)

1 Answer

Answer :

(D) Both (B) and (C)

Related questions

Description : Calorific value of both the solid & liquid fuels can be determined by using __________ calorimeter. (A) Junker's (B) Bomb (C) Boy's (D) None of these

Last Answer : (B) Bomb

Description : Calorific values of both the solid as well as the liquid fuels can be determined by __________ calorimeter. (A) Bomb (B) Boy's (C) Junkers (D) None of these

Last Answer : (A) Bomb

Description : Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Last Answer : (B) 25-30

Description : Junker's calorimeter is used to determine the calorific value of (A) Pulverised coal (B) Gaseous fuels (C) Fuel oil (D) None of these

Last Answer : (B) Gaseous fuels

Description : During its calorific value determination by bomb calorimeter, coal is combusted by (A) Air (B) Oxygen (C) Oxygen enriched air (D) None of these

Last Answer : (C) Oxygen enriched air

Description : Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Description : Bomb calorimeter is used to determine the (where, GCV - Gross Calorific Value. NCV - Net Calorific Value.) (A) GCV at constant pressure (B) GCV at constant volume (C) NCV at constant pressure (D) NCV at constant volume

Last Answer : (C) NCV at constant pressure

Description : Calorific value as determined by bomb calorimeter is the (A) Higher calorific value at constant volume (B) Gross calorific value at constant pressure (C) Lower calorific value at constant pressure (D) Net calorific value at constant volume

Last Answer : (A) Higher calorific value at constant volume

Description : Calorific value of proteins in a living person is less than that in a bomb calorimeter because (A) Digestion and absorption of proteins is less than 100% (B) Respiratory quotient of proteins ... Specific dynamic action of proteins is high (D) Proteins are not completely oxidized in living persons

Last Answer : Answer : D

Description : Calorific value of proteins as determined in a bomb calorimeter is (A) 4 kcal/gm (B) 4.8 kcal/gm (C) 5.4 kcal/gm (D) 5.8 kcal/gm

Last Answer : Answer : C

Description : Fossil fuels mean (A) Solid fuels (B) Liquid fuels (C) Those fuels which are found in the crust of earth (D) Premature fuels with low calorific value

Last Answer : (C) Those fuels which are found in the crust of earth

Description : Which of the following gaseous fuels has the lowest calorific value? (A) Gobar gas (B) Refinery gas (C) Converter gas (D) Blast furnace gas

Last Answer : (D) Blast furnace gas

Description : Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to ... coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Last Answer : (D) Calorific value of natural gas is more than that of LPG

Description : Which of the following gaseous fuels is likely to have the highest gross calorific value? (A) Sewage gas (B) LPG (C) Producer gas (D) Natural gas

Last Answer : (B) LPG

Description : Which of the following gaseous fuels has the highest net calorific value (kcal/Nm3 )? (A) Producer gas (B) Carburetted water gas (C) Natural gas (D) Liquefied petroleum gas

Last Answer : (D) Liquefied petroleum gas

Description : The optimum percentage of excess air for combustion depends upon the__________ of the fuel. (A) Type (solid, liquid or gaseous) (B) Calorific value (C) Sulphur content (D) Ignition temperature

Last Answer : (A) Type (solid, liquid or gaseous)

Description : Liquid fuels have higher calorific value than solid fuels.  A. Yes  B. No

Last Answer : Answer: A

Description : Which of the following statement is incorrect?  A. The liquid fuels consist of hydrocarbons.  B. The liquid fuels have higher calorific value than solid fuels.  C. The solid fuels have higher calorific value than liquid fuels.  D. A good fuel should have low ignition point.

Last Answer : Answer: C

Description : Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are ... __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Last Answer : (B) 900-1000

Description : Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Last Answer : (A) Type of fuels viz. solid, liquid or gaseous

Description : Wobbe index' is a characteristic of (A) Solid fuels (B) Gaseous fuels (C) Liquid fuels (D) Fat coals

Last Answer : (B) Gaseous fuels

Description : Fuels that may classified conveniently in solid, liquid and gaseous.  a. Unleaded fuel  b. Diesel fuel  c. Fossil fuel  d. All of the above

Last Answer : Fossil fuel

Description : ________ fuels produce least amount of harmful gases and do not leave behind solid residue on combustion. a) solid b)gaseous c)liquid d )semi-solid

Last Answer : b)gaseous

Description : A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the (A) Presence of large ... fuel (C) High sulphur content in the fuel (D) Lack of thorough mixing of fuel with air

Last Answer : (D) Lack of thorough mixing of fuel with air

Description : The best method of determining sulphur in crude oil is by the __________ method. (A) Kjeldahl (B) Dumas (C) Bomb calorimeter (D) Junkers calorimeter

Last Answer : (C) Bomb calorimeter

Description : Dryness fraction of wet steam is defined as the ratio of mass of vapour in the mixture to the mass of mixture __________ calorimeter is not used for measuring the dryness fraction of steam. (A) Bomb (B) Separating (C) Bucket (D) Throttling

Last Answer : A) Bomb

Description : Dryness factor of steam is defined as the ratio of the mass of vapor in the mixture to the mass of the mixture. Dryness factor of steam is measured by a __________ calorimeter. (A) Bomb (B) Throttling (C) Junker's (D) Boy's

Last Answer : Option B

Description : Presence of __________ in a dry gaseous fuel does not contribute to its calorific value. (A) Sulphur (B) Oxygen (C) Hydrogen (D) Carbon

Last Answer : (B) Oxygen

Description : Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas ... is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Last Answer : (B) Acetylene gas cannot be used for illumination purpose

Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper

Last Answer : (A) Molybdenum stainless steel

Description : The main reason for making the copper calorimeter (used in bomb calorimeter) silvery white and shining/polished is to (A) Minimise its corrosion (B) Avoid radiation heat loss (C) Make it look attractive (D) None of these

Last Answer : (B) Avoid radiation heat loss

Description : C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Last Answer : (D) May increase or decrease, depends on combustibles

Description : With increase in calorific value of fuels, their adiabatic flame temperatures (A) Increase (B) Decrease (C) Remain unchanged (D) May increase or decrease; depends on the quantity of products of combustion

Last Answer : (D) May increase or decrease; depends on the quantity of products of combustion

Description : Which of the following fuels has the highest calorific value per unit mass (kcal/kg)? (A) Coal (B) Kerosene (C) Natural gas (D) Furnace oil

Last Answer : (D) Furnace oil

Description : Out of the following fuels, the difference between gross and net calorific value will be minimum in case of (A) Coke oven gas (B) Water gas (C) Natural gas (D) Blast furnace gas

Last Answer : (D) Blast furnace gas

Description : Coal tar fuels (CTF) as compared to petroleum based fuel oils have higher (A) Calorific value (B) Higher C/H ratio (C) Sulphur content (D) Difference in gross & net calorific value

Last Answer : (B) Higher C/H ratio

Description : Out of the following fuels, the difference between the net and gross calorific value is maximum in case of (A) Pitch (B) Fuel oil (C) Blast furnace gas (D) Bituminous coal

Last Answer : (B) Fuel oil

Description : If the specific heat of gaseous products of combustion of a fuel is high, the abiabatic flame temperature will be (A) Low (B) High (C) Very high, if the fuel is of low calorific value (D) None of these

Last Answer : (A) Low(A) Low

Description : Describe with neat sketch of working of bomb calorimeter

Last Answer : working of bomb calorimeter:   The calorimeter is made of austenitic steel which provides considerable resistant to corrosion and enables it to withstand high pressure. In the calorimeter use of a strong ... the calorimeter. From the above data the calorific value of the fuel can be found.  

Description : (i) Draw the neat sketch of bomb calorimeter. (ii) Write any three sources of air leakage in steam condenser.

Last Answer : (i)   (ii) Sources of air leakage in condenser: i) Air leak through joints and packing. ii) Air also comes in condenser with the steam. iii) In jet condensers dissolved air in the cooling water enters the condenser. 

Description : (i) Explain construction and working of geothermal power plant. (ii) Explain the construction and working of bomb calorimeter.

Last Answer : (i) Geothermal power plant: Construction and Working: geothermal power plant which consists of the following main components: Underground steam storage, steam separator, steam separator, turbine and Generator. Steam is ... . From the above data the calorific value of the fuel can be found. 

Description : Among the fuels given below, the one with highest calorific value is – (1) Coke (2) Coal (3) Wood (4) Natural gas

Last Answer : (4) Natural gas Explanation: The calorific values of different fuels (in Kcal/kg) in dry state are: Wood: 3500; Coal: 4000-7000; Coke: 6500; and Natural Gas: 8600 Kcal/kg.

Description : Compare the following fuels on the basis of calorific value and knocking. LPG, CNG and bio-diesel 

Last Answer : Parameter LPG CNG Bio-diesel Calorific value 46.4MJ/Kg LPG has consistent & higher calorific value.  52.34 MJ/Kg Which is higher than LPG. 37.27 MJ/Kg this ... 65 which is higher than petro-diesel. So intensity of knocking is less in biodiesel compared to petro diesel.

Description : Among the fuels given below, the one with highest calorific value is (1) Coke (2) Coal (3) Wood (4) Natural gas

Last Answer : Natural gas

Description : During combustion of gaseous fuels, deficiency of air (A) Lengthens the flame (B) Tends to shorten the flame (C) Does not affect the flame length (D) Increases the flame temperature

Last Answer : (A) Lengthens the flame

Description : In the context of the chemical process industries, the term BOD is normally associated with the (A) Characterisation of solid wastes (B) Organic concentration in gaseous effluents (C) Characterisation of liquid effluents (D) Characterisation of boiler feed water

Last Answer : (C) Characterisation of liquid effluents

Description : One of the methods of purification of leach liquor is ion exchange, which involves (A) Exchange between two liquid phases (B) Exchange between a gaseous phase and a liquid phase (C) Exchange between a liquid phase and an organic resin phase (D) Exchange between a solid phase and a gas phase

Last Answer : (C) Exchange between a liquid phase and an organic resin phase

Description : Liquid fuels have lower efficiency than solid fuels.  A. True  B. False

Last Answer : Answer: B

Description : Compare liquid fuels with solid fuels.

Last Answer : S.N. Solid fuel Liquid fuel  1 Require more space for storage. Require less space for storage. 2 Lower calorific value Higher calorific value 3 Difficult control ... ash produced 5 deterioration of the oil in storage Non-deterioration of the oil in storage

Description : Give examples of different types of fuels. Also state any two advantages of liquid fuels over solid fuels.

Last Answer : Examples of different types of fuels:- 1. Indian Coal : It contain 30 to 40 % ash but sulphur content is less than 1%.. 2. Imported coal: It contents low ash about 10% but sulphur ... can be controlled to match the load requirements. 13. Rapid and efficient starting of the boilers from cold.