Which is the most suitable for the concert-ration of highly concentrated solution? (A) Open pan evaporation (B) Long tube vertical evaporator (C) Agitated film evaporator (D) None of these

Which is the most suitable for the concert-ration of highly concentrated

solution?

(A) Open pan evaporation

(B) Long tube vertical evaporator

(C) Agitated film evaporator

(D) None of these

by

1 Answer

Answer :

(A) Open pan evaporation

by

Related questions

Which is the most suitable for the concentration of foamy & frothy liquors? (A) Agitated film evaporator (B) Long tube vertical evaporator (C) Open pan evaporator (D) None of these

Description : Which is the most suitable for the concentration of foamy & frothy liquors? (A) Agitated film evaporator (B) Long tube vertical evaporator (C) Open pan evaporator (D) None of these

Last Answer : (B) Long tube vertical evaporator

Viscous & heat sensitive liquids are concentrated in __________ evaporators. (A) Open pan (B) Long tube (C) Agitated film (D) None of these

Description : Viscous & heat sensitive liquids are concentrated in __________ evaporators. (A) Open pan (B) Long tube (C) Agitated film (D) None of these

Last Answer : (C) Agitated film

Which of the following is used for the concentration of rubber latex? (A) Agitated film evaporator (B) Long tube vertical evaporator (C) Short tube evaporator (D) Calandria

Description : Which of the following is used for the concentration of rubber latex? (A) Agitated film evaporator (B) Long tube vertical evaporator (C) Short tube evaporator (D) Calandria

Last Answer : (A) Agitated film evaporator

Forced circulation evaporators are useful for the concentration of viscous, salting and scale forming liquors. Which of the following is a forced circulation evaporator? (A) Long vertical evaporator (B) Horizontal tube evaporator (C) Agitated film evaporator (D) Calandria vertical tube evaporator

Description : Forced circulation evaporators are useful for the concentration of viscous, salting and scale forming liquors. Which of the following is a forced circulation evaporator? (A) Long vertical evaporator (B) Horizontal tube evaporator (C) Agitated film evaporator (D) Calandria vertical tube evaporator

Last Answer : (C) Agitated film evaporator

Agitated film evaporator is suitable for concentrating __________ liquids. (A) Foaming (B) Viscous (C) Very thin (D) Corrosive

Description : Agitated film evaporator is suitable for concentrating __________ liquids. (A) Foaming (B) Viscous (C) Very thin (D) Corrosive

Last Answer : (B) Viscous

Open pan evaporators are preferred to be used, when the solution to be concentrated is (A) Scaling (B) Highly viscous (C) Corrosive (D) Salty

Description : Open pan evaporators are preferred to be used, when the solution to be concentrated is (A) Scaling (B) Highly viscous (C) Corrosive (D) Salty

Last Answer : (B) Highly viscous

Fruit juice (a heat sensitive material) can be concentrated in a __________ evaporator. (A) Long tube (B) Falling film (C) High pressure (D) None of these

Description : Fruit juice (a heat sensitive material) can be concentrated in a __________ evaporator. (A) Long tube (B) Falling film (C) High pressure (D) None of these

Last Answer : (B) Falling film

The suitable evaporator for concentration of foaming liquids is a __________ evaporator. (A) Long tube (B) Short tube (C) Vacuum (D) Falling film

Description : The suitable evaporator for concentration of foaming liquids is a __________ evaporator. (A) Long tube (B) Short tube (C) Vacuum (D) Falling film

Last Answer : (A) Long tube

In case of a vertical tube evaporator, with increase in the liquor level, the __________ is increased. (A) Velocity of circulation (B) Liquor-film co-efficient (C) Both (A) and (B) (D) Neither (A) and (B)

Description : In case of a vertical tube evaporator, with increase in the liquor level, the __________ is increased. (A) Velocity of circulation (B) Liquor-film co-efficient (C) Both (A) and (B) (D) Neither (A) and (B)

Last Answer : (D) Neither (A) and (B)

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Steam is routed through the tube in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Short tube vertical (D) Long tube vertica

Description : Steam is routed through the tube in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Short tube vertical (D) Long tube vertica

Last Answer : (B) Horizontal tube

A __________ evaporator employs an annular downtake.(A) Basket type (B) Horizontal (C) Long tube vertical (D) None of these

Description : A __________ evaporator employs an annular downtake. (A) Basket type (B) Horizontal (C) Long tube vertical (D) None of these

Last Answer : (A) Basket type

Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Description : Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Last Answer : (B) 1-1.3

For evaporation of viscous solution in a multiple effect evaporator, the preferred feeding scheme is (A) Forward (B) Backward (C) Parallel (D) None of these

Description : For evaporation of viscous solution in a multiple effect evaporator, the preferred feeding scheme is (A) Forward (B) Backward (C) Parallel (D) None of these

Last Answer : (B) Backward

In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Description : In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Last Answer : (C) Foaming of the solution

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

Which of the following is not a batch drier? (A) Truck drier (B) Agitated pan drier (C) Fluidised bed drier (D) Vacuum shelf drier

Description : Which of the following is not a batch drier? (A) Truck drier (B) Agitated pan drier (C) Fluidised bed drier (D) Vacuum shelf drier

Last Answer : (C) Fluidised bed drier

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Description : In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Last Answer : (B) Decreases

In case of a vertical tube evaporator, with increase in the liquor level, the (A) Capacity of the evaporator is decreased (B) Capacity of the evaporator is increased (C) True temperature drop increases (D) Both (B) and (C)

Description : In case of a vertical tube evaporator, with increase in the liquor level, the (A) Capacity of the evaporator is decreased (B) Capacity of the evaporator is increased (C) True temperature drop increases (D) Both (B) and (C)

Last Answer : (A) Capacity of the evaporator is decreased

Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature (C) Double pipe heat exchangers are mostly used in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

Highly viscous liquids & pastes are agitated by (A) Propellers (B) Turbine agitators (C) Multiple blade paddles (D) None of these

Description : Highly viscous liquids & pastes are agitated by (A) Propellers (B) Turbine agitators (C) Multiple blade paddles (D) None of these

Last Answer : (C) Multiple blade paddles

e-KYC is possible only for those who have _______ A. PAN Card B. Driving License C. Ration Card D. Aadhaar Number E. None of the Above

Description : e-KYC is possible only for those who have _______ A. PAN Card B. Driving License C. Ration Card D. Aadhaar Number E. None of the Above

Last Answer : D. Aadhaar Number Explanation: e-KYC is possible only for those who have Aadhaar numbers. While using e-KYC service, you have to authorise the Unique Identification Authority of India (UIDAI), ... data comprising name, age, gender, and photograph of the individual, electronically to the bank/BC.

Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Description : Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Last Answer : (D) Boiling of a liquid on a hot surface

Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Description : Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Last Answer : (C) Nickel

For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Description : For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Last Answer : (B) Vacuum

Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward feeding in multiple effect evaporation (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

The number of kg vaporised per kg of steam fed to the evaporator is defined as (A) Capacity (B) Rate of evaporation (C) Economy (D) Rate of vaporisation

Description : The number of kg vaporised per kg of steam fed to the evaporator is defined as (A) Capacity (B) Rate of evaporation (C) Economy (D) Rate of vaporisation

Last Answer : (C) Economy

Small scale evaporation is done in a (A) Heat exchanger (B) Condenser(C) Multiple effect evaporator(D) Steam jacketed kettle

Description : Small scale evaporation is done in a (A) Heat exchanger (B) Condenser (C) Multiple effect evaporator (D) Steam jacketed kettle

Last Answer : (D) Steam jacketed kettle

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis

Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Description : Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Last Answer : (C) Multiple effect evaporator

Heat sensitive materials can be concentrated in an evaporator employing (A) Vacuum (B) High pressure (C) High residence time (D) None of these

Description : Heat sensitive materials can be concentrated in an evaporator employing (A) Vacuum (B) High pressure (C) High residence time (D) None of these

Last Answer : (A) Vacuum

Heat sensitive materials can be concentrated in an evaporator employing (A) Vacuum (B) High pressure (C) High residence time (D) None of these

Description : Heat sensitive materials can be concentrated in an evaporator employing (A) Vacuum (B) High pressure (C) High residence time (D) None of these

Last Answer : (A) Vacuum

Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Description : Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Last Answer : (B) Fruit juices, milk & its products and caustic soda solution

The advantage of dry compression is that (a) it permits higher speeds to be used (b) it permits complete evaporation in the evaporator (c) it results in high volumetirc and mechanical efficiency (d) all of the above

Description : The advantage of dry compression is that (a) it permits higher speeds to be used (b) it permits complete evaporation in the evaporator (c) it results in high volumetirc and mechanical efficiency (d) all of the above

Last Answer : Ans: d

Multiple effect evaporation is generally recommended, when the (A) Large scale evaporation of liquor is needed (B) Corrosive liquids are to be concentrated

Description : Multiple effect evaporation is generally recommended, when the (A) Large scale evaporation of liquor is needed (B) Corrosive liquids are to be concentrated

Last Answer : (A) Large scale evaporation of liquor is needed

The rate of evaporation from reservoirs may be determined by (A) Pan-measurement method (B) Empirical formulae (C) Storage equation method (D) All the above

Description : The rate of evaporation from reservoirs may be determined by (A) Pan-measurement method (B) Empirical formulae (C) Storage equation method (D) All the above

Last Answer : Answer: Option D

Evaporator tubes are generally (A) Horizontal (B) Vertical (C) Inclined (D) Random

Description : Evaporator tubes are generally (A) Horizontal (B) Vertical (C) Inclined (D) Random

Last Answer : (B) Vertical

Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Description : Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Last Answer : (A) Decreased capacity

Intermittent tube cleaning is possible to be done in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Calandria (D) None of these

Description : Intermittent tube cleaning is possible to be done in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Calandria (D) None of these

Last Answer : (A) Basket type

Tubes are held between top and bottom tube sheets in Calandria type evaporator by keeping (A) Both the tube sheets fixed (B) Both the tube sheets floating (C) The top tube sheet floating and bottom tube sheet fixed (D) The top tube sheet fixed and the bottom tube-sheet floating

Description : Tubes are held between top and bottom tube sheets in Calandria type evaporator by keeping (A) Both the tube sheets fixed (B) Both the tube sheets floating (C) The top tube sheet floating and bottom tube sheet fixed (D) The top tube sheet fixed and the bottom tube-sheet floating

Last Answer : (A) Both the tube sheets fixed

Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : ANSWER: A

Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : B. Water has very high specific heat capacity (Answer)

Air can be cooled and dehumidified by A. circulating chilled water in tube across air flow B. placing evaporator coil across air flow C. spraying chilled water to air D. all of the mentioned

Description : Air can be cooled and dehumidified by A. circulating chilled water in tube across air flow B. placing evaporator coil across air flow C. spraying chilled water to air D. all of the mentioned

Last Answer : ANSWER : D

What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Description : What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Last Answer : a. Saturated steam

Write construction and disadvantages of short tube evaporator.

Description : Write construction and disadvantages of short tube evaporator.

Last Answer : Construction:   It consists of number of tubes which are from 1 to 2 meters in length and from 40- 80 mm in diameter. About 1000 tubes are fitted in a vessel upto 2.5 meter or ... It is quite complicated and expensive in construction. 2. Difficult to clean. 3. Maintenance is costly.

__________ is the most suitable for compounding rubber and plastic solids. (A) Banbury mixer (B) Pan mixer (C) Pug mill (D) Charge can mixer

Description : __________ is the most suitable for compounding rubber and plastic solids. (A) Banbury mixer (B) Pan mixer (C) Pug mill (D) Charge can mixer

Last Answer : (A) Banbury mixer

. An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Description : . An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Last Answer : (A) 4000