Heat sensitive materials can be concentrated in an evaporator employing (A) Vacuum (B) High pressure (C) High residence time (D) None of these

Heat sensitive materials can be concentrated in an evaporator employing
(A) Vacuum
(B) High pressure
(C) High residence time
(D) None of these
by

1 Answer

Answer :

(A) Vacuum
by

Related questions

Heat sensitive materials can be concentrated in an evaporator employing (A) Vacuum (B) High pressure (C) High residence time (D) None of these

Description : Heat sensitive materials can be concentrated in an evaporator employing (A) Vacuum (B) High pressure (C) High residence time (D) None of these

Last Answer : (A) Vacuum

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward feeding in multiple effect evaporation (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

Fruit juice (a heat sensitive material) can be concentrated in a __________ evaporator. (A) Long tube (B) Falling film (C) High pressure (D) None of these

Description : Fruit juice (a heat sensitive material) can be concentrated in a __________ evaporator. (A) Long tube (B) Falling film (C) High pressure (D) None of these

Last Answer : (B) Falling film

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Description : In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Last Answer : (C) Foaming of the solution

For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Description : For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Last Answer : (B) Vacuum

A dephlegmator is a (A) Total condenser (B) Vacuum evaporator (C) Partial condenser (D) Double pipe heat exchanger

Description : A dephlegmator is a (A) Total condenser (B) Vacuum evaporator (C) Partial condenser (D) Double pipe heat exchanger

Last Answer : (C) Partial condenser

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

Molecular distillation is (A) High temperature distillation (B) For heat-sensitive materials (C) Very low pressure distillation (D) Both (B) and (C)

Description : Molecular distillation is (A) High temperature distillation (B) For heat-sensitive materials (C) Very low pressure distillation (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

High pressure at the bottom of a distillation tower handling heat sensitive materials results in (A) Thermal decomposition of bottoms (B) Increased relative volatility (C) Erosion of the tower (D) Very efficient operation

Description : High pressure at the bottom of a distillation tower handling heat sensitive materials results in (A) Thermal decomposition of bottoms (B) Increased relative volatility (C) Erosion of the tower (D) Very efficient operation

Last Answer : (A) Thermal decomposition of bottoms

The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has an elevation of boiling point (B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point

Pick out the wrong statement. (A) For the compressible cake, voidage & the specific resistance of the cake can be assumed to be constant (B) Cake resistance is independent of the pressure drop (C) Crushing of explosive materials are done by employing dry-grinding (D) Gyratory crusher is a coarse crusher

Description : Pick out the wrong statement. (A) For the compressible cake, voidage & the specific resistance of the cake can be assumed to be constant (B) Cake resistance is independent of the pressure ... Crushing of explosive materials are done by employing dry-grinding (D) Gyratory crusher is a coarse crusher

Last Answer : (B) Cake resistance is independent of the pressure drop

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Viscous & heat sensitive liquids are concentrated in __________ evaporators. (A) Open pan (B) Long tube (C) Agitated film (D) None of these

Description : Viscous & heat sensitive liquids are concentrated in __________ evaporators. (A) Open pan (B) Long tube (C) Agitated film (D) None of these

Last Answer : (C) Agitated film

The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping (C) Most concentrated liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Description : The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping ... liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Last Answer : (C) Most concentrated liquid is at highest temperature

Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Description : Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Last Answer : (B) Vacuum

Which is the most suitable for the concert-ration of highly concentrated solution? (A) Open pan evaporation (B) Long tube vertical evaporator (C) Agitated film evaporator (D) None of these

Description : Which is the most suitable for the concert-ration of highly concentrated solution? (A) Open pan evaporation (B) Long tube vertical evaporator (C) Agitated film evaporator (D) None of these

Last Answer : (A) Open pan evaporation

Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Description : Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Last Answer : (C) Multiple effect evaporator

Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Description : Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Last Answer : (A) Liquid extraction

The suitable evaporator for concentration of foaming liquids is a __________ evaporator. (A) Long tube (B) Short tube (C) Vacuum (D) Falling film

Description : The suitable evaporator for concentration of foaming liquids is a __________ evaporator. (A) Long tube (B) Short tube (C) Vacuum (D) Falling film

Last Answer : (A) Long tube

The purpose of providing bleed points in the evaporator is to (A) Admit the feed (B) Remove the product (C) Facilitate removal of non-condensable gases (D) Create vacuum

Description : The purpose of providing bleed points in the evaporator is to (A) Admit the feed (B) Remove the product (C) Facilitate removal of non-condensable gases (D) Create vacuum

Last Answer : (C) Facilitate removal of non-condensable gases

The purpose of providing a 'catchall' in the vapor line of an evaporator is to (A) Create vacuum (B) Regulate the vapor flow (C) Vent the non-condensable gases (D) Arrest the entrained liquid

Description : The purpose of providing a 'catchall' in the vapor line of an evaporator is to (A) Create vacuum (B) Regulate the vapor flow (C) Vent the non-condensable gases (D) Arrest the entrained liquid

Last Answer : (D) Arrest the entrained liquid

In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Description : In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Last Answer : (A) Increases

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

Low-temperature ____ evaporators are used for heat-sensitive foods. a. ultrafiltration c. vacuum b. osmosis d. drum

Description : Low-temperature ____ evaporators are used for heat-sensitive foods. a. ultrafiltration c. vacuum b. osmosis d. drum

Last Answer : c. vacuum

Heat sensitive materials like certain pharmaceuticals and food stuffs can be dried in a/an __________ dryer. (A) Indirect tray (B) Spray (C) Freeze (D) None of these

Description : Heat sensitive materials like certain pharmaceuticals and food stuffs can be dried in a/an __________ dryer. (A) Indirect tray (B) Spray (C) Freeze (D) None of these

Last Answer : (C) Freeze

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Description : In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Last Answer : (C) Positive pressure exists in the furnace

Test specimen for determination of refractoriness under load (RUL) of a refractory is heated in a (A) Furnace employing neutral atmosphere (B) Carbon resistance furnace (C) Reducing atmosphere (D) Furnace employing negative pressure

Description : Test specimen for determination of refractoriness under load (RUL) of a refractory is heated in a (A) Furnace employing neutral atmosphere (B) Carbon resistance furnace (C) Reducing atmosphere (D) Furnace employing negative pressure

Last Answer : (B) Carbon resistance furnace

. In a backward feed multiple effect evaporator (A) Feed is introduced in the first effect (B) Feed flows from low pressure to high pressure (C) No pumps are required between successive effects (D) None of these

Description : . In a backward feed multiple effect evaporator (A) Feed is introduced in the first effect (B) Feed flows from low pressure to high pressure (C) No pumps are required between successive effects (D) None of these

Last Answer : (B) Feed flows from low pressure to high pressure

Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Description : Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Last Answer : (B) Reduce drying temperature

Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased severity of cracking (C) At low pressure, the yield of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Description : Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased ... of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Last Answer : (D) Greater depth of cracking gives lower octane number gasoline

Mean residence time is equal to the space time, when (A) The feed rate is measured at temperature and pressure in the reactor (B) The temperature, pressure and the density of reaction mixture remains constant throughout the reactor (C) There is no change in number of moles in gaseous reaction (D) All (A), (B) and (C)

Description : Mean residence time is equal to the space time, when (A) The feed rate is measured at temperature and pressure in the reactor (B) The temperature, pressure and the density of reaction mixture remains constant throughout ... no change in number of moles in gaseous reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

or the same heat transfer area and the terminal conditions, the ratio of the capacities of a single effect evaporator to a triple effect evaporator is (A) 3 (B) 0.33 (C) 1 (D) 1.33

Description : or the same heat transfer area and the terminal conditions, the ratio of the capacities of a single effect evaporator to a triple effect evaporator is (A) 3 (B) 0.33 (C) 1 (D) 1.33

Last Answer : (C) 1

Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Description : In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Last Answer : (B) Decreases

Economy of a multiple effect evaporator is not influenced much by the (A) Boiling point elevations (B) Temperature of the feed (C) Rate of heat transfer (D) Ratio of the weight of the thin liquor to thick liquor

Description : Economy of a multiple effect evaporator is not influenced much by the (A) Boiling point elevations (B) Temperature of the feed (C) Rate of heat transfer (D) Ratio of the weight of the thin liquor to thick liquor

Last Answer : (A) Boiling point elevations

Small scale evaporation is done in a (A) Heat exchanger (B) Condenser(C) Multiple effect evaporator(D) Steam jacketed kettle

Description : Small scale evaporation is done in a (A) Heat exchanger (B) Condenser (C) Multiple effect evaporator (D) Steam jacketed kettle

Last Answer : (D) Steam jacketed kettle

Economy of a multiple effect evaporator depends upon the (A) Heat balance consideration (B) Rate of heat transfer (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Economy of a multiple effect evaporator depends upon the (A) Heat balance consideration (B) Rate of heat transfer (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Heat balance consideration

Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature (C) Double pipe heat exchangers are mostly used in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10

A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Description : A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Last Answer : (C) Higher steam economy

nswer: Option B 559. Heat release during phase change is observed in case of a/an (A) Boiler (B) Condenser (C) Evaporator (D) All (A), (B) & (C)

Description : nswer: Option B 559. Heat release during phase change is observed in case of a/an (A) Boiler (B) Condenser (C) Evaporator (D) All (A), (B) & (C)

Last Answer : (B) Condenser

Which of the following statements about septic shock are true? A. A circulating myocardial depressant factor may account for the cardiac dysfunction sometimes seen with shock due to sepsis or SIRS. B. A cardiac index (CI) of 6 liters per minute per square meter of body surface, a pulmonary capillary wedge pressure of 15 mm. Hg, and a systemic vascular resistance index (SVRI) of 800 dynes-sec/(cm 5-m 2) is a hemodynamic profile consistent with septic shock. C. An increase in SvO 2 in septic patients may be explained by the finding of anatomic arteriovenous shunts. D. Results of human trials employing antimediator therapy, such as antiendotoxin antibodies, IL-1 receptor antagonist, and tumor necrosis factor (TNF) antibodies, have confirmed animal studies that demonstrate a significant im

Description : Which of the following statements about septic shock are true? A. A circulating myocardial depressant factor may account for the cardiac dysfunction sometimes seen with shock due to sepsis or ... animal studies that demonstrate a significant improvement in survival with the use of such agents.

Last Answer : Answer: AB DISCUSSION: Shock due to sepsis or SIRS frequently manifests as a hyperdynamic cardiovascular response, consisting of an elevated CI and a decreased SVR or SVRI. Occasionally, ... been encouraging thus far in human clinical trials, despite the promising results from many animal studies

A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Description : A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Last Answer : torr

For better COP of refrigerator, the pressure range corresponding to temperature in evaporator and condenser must be (a) small (b) high (c) equal (d) anything

Description : For better COP of refrigerator, the pressure range corresponding to temperature in evaporator and condenser must be (a) small (b) high (c) equal (d) anything

Last Answer : Ans: a

Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is proportional to the number of times the fluid crosses the bundle between baffles (C) Propagation velocity for travel of heat radiation through vacuum is equal to the velocity of the light (D) The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Description : Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is ... The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Last Answer : (A) Heat transfer by radiation cannot occur across an absolute volume

Economy of an evaporator is influenced by the (A) Steam pressure (B) Feed temperature (C) Number of effect (D) Both (B) & (C)

Description : Economy of an evaporator is influenced by the (A) Steam pressure (B) Feed temperature (C) Number of effect (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

The actual temperature drop across the heating surface in an evaporator depends on the (A) Feed (B) Depth of liquid over heating surface (C) Pressure difference between steam chest and vapour space (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface in an evaporator depends on the (A) Feed (B) Depth of liquid over heating surface (C) Pressure difference between steam chest and vapour space (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)