Economy of an evaporator is influenced by the (A) Steam pressure (B) Feed temperature (C) Number of effect (D) Both (B) & (C)

Economy of an evaporator is influenced by the

(A) Steam pressure

(B) Feed temperature

(C) Number of effect

(D) Both (B) & (C)

by

1 Answer

Answer :

(D) Both (B) & (C)

by

Related questions

Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature (C) Double pipe heat exchangers are mostly used in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

Economy of a multiple effect evaporator is not influenced much by the (A) Boiling point elevations (B) Temperature of the feed (C) Rate of heat transfer (D) Ratio of the weight of the thin liquor to thick liquor

Description : Economy of a multiple effect evaporator is not influenced much by the (A) Boiling point elevations (B) Temperature of the feed (C) Rate of heat transfer (D) Ratio of the weight of the thin liquor to thick liquor

Last Answer : (A) Boiling point elevations

A backward feed multiple effect evaporator is better than forward feed for concentrating cold feed, because it provides (A) Higher economy (B) Lower capacity (C) Both (A) & (B) (D) Lower economy

Description : A backward feed multiple effect evaporator is better than forward feed for concentrating cold feed, because it provides (A) Higher economy (B) Lower capacity (C) Both (A) & (B) (D) Lower economy

Last Answer : (A) Higher economy

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

The actual temperature drop across the heating surface in an evaporator depends on the (A) Feed (B) Depth of liquid over heating surface (C) Pressure difference between steam chest and vapour space (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface in an evaporator depends on the (A) Feed (B) Depth of liquid over heating surface (C) Pressure difference between steam chest and vapour space (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

What is the steam economy in case of a single effect evaporator system? (A) 1 (B) > 1 (C) < 1 (D) 0.1

Description : What is the steam economy in case of a single effect evaporator system? (A) 1 (B) > 1 (C) < 1 (D) 0.1

Last Answer : (C) < 1

Steam economy in case of a triple effect evaporator will be (A) 1(B) < 1 (C) > 1 (D) Between 0 and 1

Description : Steam economy in case of a triple effect evaporator will be (A) 1 (B) < 1 (C) > 1 (D) Between 0 and 1

Last Answer : (C) > 1

A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Description : A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Last Answer : (C) Higher steam economy

Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward feeding in multiple effect evaporation (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

Steam consumption in kg/hr in case of an evaporator is given by (where, C & E are capacity the economy of the evaporator respectively).(A) C/E (B) E/C (C) CE (D) 1/CE

Description : Steam consumption in kg/hr in case of an evaporator is given by (where, C & E are capacity the economy of the evaporator respectively). (A) C/E (B) E/C (C) CE (D) 1/CE

Last Answer : (A) C/E

Reason for operating an evaporator in multiple effects is to secure (A) Increased steam economy (B) Decreased steam consumption (C) Both (A) and (B) (D) Increased capacity

Description : Reason for operating an evaporator in multiple effects is to secure (A) Increased steam economy (B) Decreased steam consumption (C) Both (A) and (B) (D) Increased capacity

Last Answer : (C) Both (A) and (B)

In a forward feed multiple effect evaporator, the pressure is (A) Highest in last effect (B) Lowest in last effect (C) Same in all effects (D) Dependent on the number of effects

Description : In a forward feed multiple effect evaporator, the pressure is (A) Highest in last effect (B) Lowest in last effect (C) Same in all effects (D) Dependent on the number of effects

Last Answer : (B) Lowest in last effect

The number of kg vaporised per kg of steam fed to the evaporator is defined as (A) Capacity (B) Rate of evaporation (C) Economy (D) Rate of vaporisation

Description : The number of kg vaporised per kg of steam fed to the evaporator is defined as (A) Capacity (B) Rate of evaporation (C) Economy (D) Rate of vaporisation

Last Answer : (C) Economy

. In a backward feed multiple effect evaporator (A) Feed is introduced in the first effect (B) Feed flows from low pressure to high pressure (C) No pumps are required between successive effects (D) None of these

Description : . In a backward feed multiple effect evaporator (A) Feed is introduced in the first effect (B) Feed flows from low pressure to high pressure (C) No pumps are required between successive effects (D) None of these

Last Answer : (B) Feed flows from low pressure to high pressure

Kg of liquid evaporated per hour in an evaporator is defined as its (A) Capacity (B) Economy (C) Steam load (D) None of these

Description : Kg of liquid evaporated per hour in an evaporator is defined as its (A) Capacity (B) Economy (C) Steam load (D) None of these

Last Answer : (A) Capacity

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Description : In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Last Answer : (A) Increases

Through what is feed water from hot-well is passed through, before entering steam and water drum in Lamont boiler? a. Evaporator tubes b. Economizer c. Distributor header d. Circulating pump

Description : Through what is feed water from hot-well is passed through, before entering steam and water drum in Lamont boiler? a. Evaporator tubes b. Economizer c. Distributor header d. Circulating pump

Last Answer : b. Economizer

The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Description : For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Last Answer : (B) Vacuum

Economy of a multiple effect evaporator depends upon the (A) Heat balance consideration (B) Rate of heat transfer (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Economy of a multiple effect evaporator depends upon the (A) Heat balance consideration (B) Rate of heat transfer (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Heat balance consideration

Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Description : Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Last Answer : (B) 1-1.3

Small scale evaporation is done in a (A) Heat exchanger (B) Condenser(C) Multiple effect evaporator(D) Steam jacketed kettle

Description : Small scale evaporation is done in a (A) Heat exchanger (B) Condenser (C) Multiple effect evaporator (D) Steam jacketed kettle

Last Answer : (D) Steam jacketed kettle

In a forward feed multiple effect evaporator unit (A) Viscosity of liquid is highest in first effect (B) Transfer from effect to effect is done by pumps (C) No pump is required to withdraw the product from the last effect (D) None of these

Description : In a forward feed multiple effect evaporator unit (A) Viscosity of liquid is highest in first effect (B) Transfer from effect to effect is done by pumps (C) No pump is required to withdraw the product from the last effect (D) None of these

Last Answer : (D) None of these

In a single effect evaporator, the economy is (A) 1 (B) < 1 (C) > 1 (D) None of these

Description : In a single effect evaporator, the economy is (A) 1 (B) < 1 (C) > 1 (D) None of these

Last Answer : (B) < 1

In a multiple effect evaporator, the effect of boiling point elevation is to (A) Reduce the capacity (B) Reduce the economy (C) Increase the economy (D) None of these

Description : In a multiple effect evaporator, the effect of boiling point elevation is to (A) Reduce the capacity (B) Reduce the economy (C) Increase the economy (D) None of these

Last Answer : (A) Reduce the capacity

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Explain the type of multiple effect evaporator feed arrangement used for handling viscous liquid.

Description : Explain the type of multiple effect evaporator feed arrangement used for handling viscous liquid.

Last Answer : Backward feed arrangement  If the liquid is very viscous, then we have to adopt backward feed arrangement. In this arrangement, the feed solution and vapour flow is in opposite direction. Fresh feed is ... Not very common as it need pump. At low values of feed temperature higher economy.

The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has an elevation of boiling point (B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point

Multiple effect evaporators ar used to (A) Increase the steam economy & decrease the capacity (B) Increase the steam economy & the capacity (C) Decrease the steam economy & the capacity (D) Decrease the steam economy & increase the capacity

Description : Multiple effect evaporators ar used to (A) Increase the steam economy & decrease the capacity (B) Increase the steam economy & the capacity (C) Decrease the steam economy & the capacity (D) Decrease the steam economy & increase the capacity

Last Answer : (B) Increase the steam economy & the capacity

Evaporation by thermo compression results in the (A) Saving of steam (B) Realisation of multiple effect economy in a single effect (C) Both (A) and (B) (D) None of these

Description : Evaporation by thermo compression results in the (A) Saving of steam (B) Realisation of multiple effect economy in a single effect (C) Both (A) and (B) (D) None of these

Last Answer : (C) Both (A) and (B)

Steam is routed through the tube in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Short tube vertical (D) Long tube vertica

Description : Steam is routed through the tube in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Short tube vertical (D) Long tube vertica

Last Answer : (B) Horizontal tube

Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

The purpose of providing bleed points in the evaporator is to (A) Admit the feed (B) Remove the product (C) Facilitate removal of non-condensable gases (D) Create vacuum

Description : The purpose of providing bleed points in the evaporator is to (A) Admit the feed (B) Remove the product (C) Facilitate removal of non-condensable gases (D) Create vacuum

Last Answer : (C) Facilitate removal of non-condensable gases

In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Description : In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Last Answer : (B) Decreases

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10

Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Description : Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Last Answer : (A) Decreased capacity

The effect of changing the evaporator temperature on COP as compared to that of changing the condenser temperature (in vapour compression refrigeration system) is (A) Less pronounced (B) More pronounced (C) Equal (D) Data insufficient, can't be predicted

Description : The effect of changing the evaporator temperature on COP as compared to that of changing the condenser temperature (in vapour compression refrigeration system) is (A) Less pronounced (B) More pronounced (C) Equal (D) Data insufficient, can't be predicted

Last Answer : (B) More pronounced

. In evaporators, lowering the feed temperature (A) Increases the heating area required (B) Reduces the economy (C) Both (A) and (B) (D) Decreases the heating area required

Description : . In evaporators, lowering the feed temperature (A) Increases the heating area required (B) Reduces the economy (C) Both (A) and (B) (D) Decreases the heating area required

Last Answer : (C) Both (A) and (B)

Multiple effect evaporation accounts for (A) Steam economy (B) Lower operating costs(C) Investment economy(D) None of these

Description : Multiple effect evaporation accounts for (A) Steam economy (B) Lower operating costs (C) Investment economy (D) None of these

Last Answer : (A) Steam economy

For a cold dilute feed to produce thick viscous liquor, backward feeding as compared to forward feeding results in (A) Increased economy (B) Decreased economy (C) Lower capacity (D) No effect on economy

Description : For a cold dilute feed to produce thick viscous liquor, backward feeding as compared to forward feeding results in (A) Increased economy (B) Decreased economy (C) Lower capacity (D) No effect on economy

Last Answer : (A) Increased economy

For hot feed, forward feeding as compared to backward feeding results in __________ economy. (A) Increased (B) Decreased (C) No effect on (D) None of these

Description : For hot feed, forward feeding as compared to backward feeding results in __________ economy. (A) Increased (B) Decreased (C) No effect on (D) None of these

Last Answer : (A) Increased

What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Description : What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Last Answer : a. Saturated steam

The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during feed water treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Description : The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during ... treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Last Answer : (C) Release of non-condensable gas from water in the boiler

Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water(B) Cooling and freezing of water kills the bacteria present in it(C) With increasing boiler operating pressure of steam, the maximumallowable concentration of silica in feed water goes on decreasing(D) Dissolved oxygen content in high pressure boiler feed water should benil

Description : Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water (B) Cooling and freezing of water kills the ... goes on decreasing (D) Dissolved oxygen content in high pressure boiler feed water should be nil

Last Answer : (B) Cooling and freezing of water kills the bacteria present in it

The delivery pressure of boiler feed water pump compared to the boiler steam pressure is (A) Same (B) Slightly less (C) Slightly more (D) Much more

Description : The delivery pressure of boiler feed water pump compared to the boiler steam pressure is (A) Same (B) Slightly less (C) Slightly more (D) Much more

Last Answer : (C) Slightly more

Define capacity and economy of evaporator.

Description : Define capacity and economy of evaporator.

Last Answer : The capacity of an evaporator is defined as the number of kilogram of water evaporated per hour. The economy of an evaporator is defined as the number of kilogram of water evaporated per kilogram of steam fed to the evaporator.

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis