The effect of heat used in converting heat energy to mechanical energy is

The effect of heat used in converting heat energy to mechanical energy is
by

1 Answer

Answer :

change of

state of matter.
by

Related questions

Why cannot increase in temperature and expansion not be used for converting heat energy into mechanical energy?

Description : Why cannot increase in temperature and expansion not be used for converting heat energy into mechanical energy?

Last Answer : Increase in temperature cannot be used to convert heat energy in to mechanical energy. Expansion of solids, liquids and gases by heat is very small to make it convert into mechanical energy.

Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : (2) Mechanical energy into electrical energy Explanation: A dynamo is a device for converting mechanical energy into electrical energy, esp. one that produces direct current. A dynamo is an ... were based, including the electric motor, the alternating-current alternator, and the rotary converter.

Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : (2) Mechanical energy into electrical energy Explanation: A dynamo is a device for converting mechanical energy into electrical energy, esp. one that produces direct current. A dynamo is an ... were based, including the electric motor, the alternating-current alternator, and the rotary converter.

The dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) None of these

Description : The dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) None of these

Last Answer : (2) Mechanical energy into electrical energy

Dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : Mechanical energy into electrical energy

The device used for converting mechanical energy into electrical energy is called a/an (a) cell (b) transformer (c) dynamo (d) electric motor

Description : The device used for converting mechanical energy into electrical energy is called a/an (a) cell (b) transformer (c) dynamo (d) electric motor

Last Answer : Ans:(c)

The nerve fiber is capable of converting which stimuli to electrical energy a. Mechanical b. chemical c. Both d. none of them

Description : The nerve fiber is capable of converting which stimuli to electrical energy a. Mechanical b. chemical c. Both d. none of them

Last Answer : Both

Which effect of heat is used in conversion of heat energy into mechanical energy?

Description : Which effect of heat is used in conversion of heat energy into mechanical energy?

Last Answer : Change of liquid to gaseous state of matter is most in designing heat engines.

Clinically, the angiotensin antagonists share the following features of angiotensin converting enzyme inhibitors except: A. Antihypertensive efficacy B. Potential to reverse left ventricular hypertrophy C. Lack of effect on carbohydrate tolerance D. Potential to induce cough in susceptible individuals

Description : Clinically, the angiotensin antagonists share the following features of angiotensin converting enzyme inhibitors except: A. Antihypertensive efficacy B. Potential to reverse left ventricular hypertrophy ... of effect on carbohydrate tolerance D. Potential to induce cough in susceptible individuals

Last Answer : D. Potential to induce cough in susceptible individuals

How does mechanical energy change into heat energy?

Description : How does mechanical energy change into heat energy?

Last Answer : It can convert in several different ways; one common way isthrough friction.

Heat engine uses ______ energy to produce mechanical work. a. Thermal b. Fluid c. Kinetic d. Electric (Ans:a)

Description : Heat engine uses ______ energy to produce mechanical work. a. Thermal b. Fluid c. Kinetic d. Electric (Ans:a)

Last Answer : Which of the following is not an internal Combustion (IC) engine? a. Gas engine b. Wankel engine c. Jet engine d. Stirling engine (Ans:d)

Mechanical energy is the combination of kinetic energy and _______. (1) Heat energy (2) Chemical energy (3) Potential energy (4) Nuclear energy

Description : Mechanical energy is the combination of kinetic energy and _______. (1) Heat energy (2) Chemical energy (3) Potential energy (4) Nuclear energy

Last Answer : (3) Potential energy Explanation: Mechanical energy is the energy possessed by an object due to either its motion or its stored energy of position. The total amount of mechanical energy is merely the sum of potential energy and kinetic energy.

A photoelectric cell converts – (1) Mechanical energy to electric energy (2) Heat energy to mechanical energy (3) Light energy to chemical energy (4) Light energy to electrical energy

Description : A photoelectric cell converts – (1) Mechanical energy to electric energy (2) Heat energy to mechanical energy (3) Light energy to chemical energy (4) Light energy to electrical energy

Last Answer : (4) Light energy to electrical energy Explanation: Photoelectric cell or photocell, device whose electrical characteristics (e.g., current, voltage, or resistance) vary when light is incident ... The most common type consists of two electrodes separated by a light-sensitive semiconductor material.

A moving car possesses - (1) sound energy (2) mechanical energy (3) heat energy (4) (d)chemical energy

Description : A moving car possesses - (1) sound energy (2) mechanical energy (3) heat energy (4) (d)chemical energy

Last Answer : (2) mechanical energy Explanation: A moving baseball possesses mechanical energy due to both its high speed (kinetic energy) and its vertical position above the ground (gravitational potential energy).

A steam engine converts the heat energy of steam into _____. (1) Electrical energy (2) Chemical energy (3) Mechanical energy (4) Thermal energy

Description : A steam engine converts the heat energy of steam into _____. (1) Electrical energy (2) Chemical energy (3) Mechanical energy (4) Thermal energy

Last Answer : (3) Mechanical energy Explanation: Steam engine, machine for converting heat energy into mechanical energy using steam as a medium, or working fluid.

The energy consumed by an AC motor, as strictly reactive power, is _____________. A. used to do mechanical work B. used to establish the magnetic field of the motor C. lost as heat generated by the windings D. lost in doing work to turn the motor itself

Description : The energy consumed by an AC motor, as strictly reactive power, is _____________. A. used to do mechanical work B. used to establish the magnetic field of the motor C. lost as heat generated by the windings D. lost in doing work to turn the motor itself

Last Answer : Answer: B

Potential flow is characterised by the (A) Irrotational and frictionless flow(B) Irrotational and frictional flow(C) One in which dissipation of mechanical energy into heat occurs(D) Formation of eddies within the stream

Description : Potential flow is characterised by the (A) Irrotational and frictionless flow (B) Irrotational and frictional flow (C) One in which dissipation of mechanical energy into heat occurs (D) Formation of eddies within the stream

Last Answer : (A) Irrotational and frictionless flow

A thermoelectric engine which consists of two dissimilar electric conductors connected at two junctions maintained at different temperatures, converts (a) Electric energy into heat energy [IES-2006] (b) Heat energy into electric energy (c) Mechanical work into electric energy (d) Electric energy into mechanical work

Description : A thermoelectric engine which consists of two dissimilar electric conductors connected at two junctions maintained at different temperatures, converts (a) Electric energy into heat energy [IES-2006] (b ... energy (c) Mechanical work into electric energy (d) Electric energy into mechanical work  

Last Answer : (b) Heat energy into electric energy  

The following is the correct order of energy conversion in thermal power plants a. Chemical energy – Mechanical energy – Electrical energy b. Mechanical energy – Chemical energy – Electrical energy c. Wind energy – Mechanical energy – Electrical energy d. Heat energy – Electrical energy – Mechanical energy.

Description : The following is the correct order of energy conversion in thermal power plants a. Chemical energy - Mechanical energy - Electrical energy b. Mechanical energy - Chemical energy - Electrical energy c ... - Mechanical energy - Electrical energy d. Heat energy - Electrical energy - Mechanical energy.

Last Answer : a. Chemical energy – Mechanical energy – Electrical energy

A boiler is a device used to create steam by applying __________to water a) Light energy b) heat energy c) Wind energy d) mechanical energy

Description : A boiler is a device used to create steam by applying __________to water a) Light energy b) heat energy c) Wind energy d) mechanical energy

Last Answer : b) heat energy

When brakes are applied on a moving vehicle the kinetic energy is converted to A. Mechanical energy B. Heat energy C. Electrical energy D. Potential energy

Description : When brakes are applied on a moving vehicle the kinetic energy is converted to A. Mechanical energy B. Heat energy C. Electrical energy D. Potential energy

Last Answer : B. Heat energy

Study of transformation of heat energy to mechanical energy to other forms of energy.  a. Thermodynamics  b. Physics  c. Mechanics  d. None of the above

Description : Study of transformation of heat energy to mechanical energy to other forms of energy.  a. Thermodynamics  b. Physics  c. Mechanics  d. None of the above

Last Answer : Thermodynamics

An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Description : An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Last Answer : Answer: D

Thermocouples convert a. heat energy into electrical energy b. heat energy into light energy c. heat energy into mechanical energy d. mechanical energy into heat energy

Description : Thermocouples convert a. heat energy into electrical energy b. heat energy into light energy c. heat energy into mechanical energy d. mechanical energy into heat energy

Last Answer : d. mechanical energy into heat energy

A photo-electric cell converts (1) mechanical energy to electric energy (2) heat energy to mechanical energy (3) light energy to chemical energy (4) light energy to electrical energy

Description : A photo-electric cell converts (1) mechanical energy to electric energy (2) heat energy to mechanical energy (3) light energy to chemical energy (4) light energy to electrical energy

Last Answer : light energy to electrical energy

What is converting stored energy?

Description : What is converting stored energy?

Last Answer : Feel Free to Answer

What is a energy converting organelle found in plants and algae cells?

Description : What is a energy converting organelle found in plants and algae cells?

Last Answer : What is the answer ?

What is a typical process of converting wind energy into electrical energy?

Description : What is a typical process of converting wind energy into electrical energy?

Last Answer : Propellers are turned by the wind, and they turn generators.

There are two properties of the cell necessary to maintain nonequilibrium cellular composition; the first is selectivity and the second is energy conversion. Which of the following statement(s) is/are true concerning energy converting transport? a. The site of energy conversion and transport in the plasma membrane involves the phospholipid component b. The Na+-K++-ATPase derives energy from hydrolysis of extracellular ATP c. In some systems, energy inherent in the transmembrane ion gradient can be used to drive transport of a second species d. Examples of species transported via secondary active transport include hydrogen ions, calcium, amino acids and glucose

Description : There are two properties of the cell necessary to maintain nonequilibrium cellular composition; the first is selectivity and the second is energy conversion. Which of the following statement(s ... transported via secondary active transport include hydrogen ions, calcium, amino acids and glucose

Last Answer : Answer: c, d The selectivity of the plasma membrane, although impressive, cannot account for the nonequilibrium composition of living cells. A cell can be maintained in a nonequilibrium state only by ... to drive the transport of a second species such as protons, calcium, amino acids, or glucose

In plants, __________ is the process of converting stored energy into energy for plant growth. a. Transpiration b. Photosynthesis c. Respiration d. Pollination

Description : In plants, __________ is the process of converting stored energy into energy for plant growth. a. Transpiration b. Photosynthesis c. Respiration d. Pollination

Last Answer : Respiration

Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Description : Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Last Answer : (B) Mechanical draft cooling tower

Is heat an electromagnetic wave or mechanical wave?

Description : Is heat an electromagnetic wave or mechanical wave?

Last Answer : Radiant heat is electromagnetic radiation.Thermal heat is the micro kinetic energy of the component atomsor molecules of a material substance.The "or" of the question can not be answered because there is no"or" involved.

When a solid-state component of an electronic circuit is mounted to a metallic mass, the general purpose of that mass is to ____________. A. prevent vibration damage to delicate components B. prevent mechanical damage to solid-state components C. dissipate stray magnetic currents D. act as a heat sink

Description : When a solid-state component of an electronic circuit is mounted to a metallic mass, the general purpose of that mass is to ____________. A. prevent vibration damage to delicate components B. prevent ... damage to solid-state components C. dissipate stray magnetic currents D. act as a heat sink

Last Answer : Answer: D

Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low interfacial tension (C) When Henry's law constant is very small, then the mass transfer rate is controlled by the gas film resistance (D) Taylor-Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Description : Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low ... Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Last Answer : (A) Mechanical agitation is required, if the system has low interfacial tension

The main purpose of providing fins on heat transfer surface is to increase the (A) Temperature gradient (B) Mechanical strength of the equipment (C) Heat transfer area (D) Heat transfer co-efficient

Description : The main purpose of providing fins on heat transfer surface is to increase the (A) Temperature gradient (B) Mechanical strength of the equipment (C) Heat transfer area (D) Heat transfer co-efficient

Last Answer : (C) Heat transfer area

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Description : The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Last Answer : joule

Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to?  a) 4,190,000 joules  b) 8,390,000 joules  c) 839,000 joules  d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Description : Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to?  a) 4,190,000 joules  b) 8,390,000 joules  c) 839, ... d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Last Answer : 419 000 joules

How many joules of work is the equivalent of 15000 cal of heat?  a) 62850 joules  b) 3579.95 joules  c) 14995.81 joules  d) 15004.19 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Description : How many joules of work is the equivalent of 15000 cal of heat?  a) 62850 joules  b) 3579.95 joules  c) 14995.81 joules  d) 15004.19 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Last Answer : 62850 joules

Sensitivity to hot and cold foods soon after cavity preparation and placement of GIC and composite resin in an upper incisor tooth is due to: A. Mechanical trauma due to cavity preparation B. Chemical C. Heat from GIC settings

Description : Sensitivity to hot and cold foods soon after cavity preparation and placement of GIC and composite resin in an upper incisor tooth is due to: A. Mechanical trauma due to cavity preparation B. Chemical C. Heat from GIC settings

Last Answer : A. Mechanical trauma due to cavity preparation

What is the process of converting solid ice into a gas called?

Description : What is the process of converting solid ice into a gas called?

Last Answer : A: Sublimation.

A transformer is a device for (a) stepping up (or down) DC voltage (b) generating electricity (c) stepping up (or down) AC voltage (d) converting AC into DC

Description : A transformer is a device for (a) stepping up (or down) DC voltage (b) generating electricity (c) stepping up (or down) AC voltage (d) converting AC into DC

Last Answer : Ans:(c)

'Chlorination' is 1. A process of converting chlorides into chlorine 2. Adding small amounts of chlorine to impure water 3. A chemical reaction in which chlorine is formed 4. An addition reaction of ethylene and chlorine The correct statements are: (a) 1 and 4 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2

Description : 'Chlorination' is 1. A process of converting chlorides into chlorine 2. Adding small amounts of chlorine to impure water 3. A chemical reaction in which chlorine is formed 4. An addition reaction of ethylene and chlorine The correct statements are: (a) 1 and 4 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2

Last Answer : Ans:(b)

The process of converting liquid oil into solids saturated fats by passing hydrogen gas is

Description : The process of converting liquid oil into solids saturated fats by passing hydrogen gas is

Last Answer : called hydrogenation.

Is Excel 2013 supposed to lead you Transpose for converting vertical to horizontal list, if not what does?

Description : Is Excel 2013 supposed to lead you Transpose for converting vertical to horizontal list, if not what does?

Last Answer : You can just type =transpose( then highlight your cells

Is there an Excel formula for calculating a length of time and converting it to decimals?

Description : Is there an Excel formula for calculating a length of time and converting it to decimals?

Last Answer : answer:If you are keeping time to the quarter hour, then the decimals are really decimals: i.e., hundredths of an hour. So you don't need a formula. It's simple subtraction, the same ... as you stick to quarter hours and use decimals, those numbers are great tools for several work-related purposes.

Audio help with converting an Xbox to a monitor?

Description : Audio help with converting an Xbox to a monitor?

Last Answer : buy a pair of headphones and hook them up to the xbox. Your not getting sound because DVI doesn’t do audio.

Help converting .Wma to .Mp3 on PC?

Description : Help converting .Wma to .Mp3 on PC?

Last Answer : answer:iTunes will automatically convert WMAs to whatever your current Import setting is. 1) Change the import format to MP3 (or AAC or whatever you want for a destination file) Choose Edit -> Preferences ... good program, but I think it's overly complicated for a simple conversion, so I use iTunes.