Humid volume is the total volume in m3 of 1 kg of (A) Vapour laden gas at 1 atm. and room temperature (B) Gas plus its accompanying vapour at 1 atm. and room temperature (C) Gas plus its accompanying vapour at 1 atm. and gas temperature (D) Vapour laden gas at 1 atm. and gas temperature

Humid volume is the total volume in m3 of 1 kg of
(A) Vapour laden gas at 1 atm. and room temperature
(B) Gas plus its accompanying vapour at 1 atm. and room temperature
(C) Gas plus its accompanying vapour at 1 atm. and gas temperature
(D) Vapour laden gas at 1 atm. and gas temperature
by

1 Answer

Answer :

(C) Gas plus its accompanying vapour at 1 atm. and gas temperature
by

Related questions

Heat in BTU necessary to increase the temperature of 1 lb of gas and its accompanying vapour by 1°F is called the (A) Latent heat (B) Humid heat (C) Specific heat (D) Sensible heat

Description : Heat in BTU necessary to increase the temperature of 1 lb of gas and its accompanying vapour by 1°F is called the (A) Latent heat (B) Humid heat (C) Specific heat (D) Sensible heat

Last Answer : (C) Specific heat

At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Description : At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room ... which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Last Answer : (C) 0.4

Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Description : Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Last Answer : (B) 1000°C and 10 atm

Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction (C) The equilibrium constant of a reaction depends upon temperature only (D) The conversion for a gas phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Description : Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With ... phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Last Answer : (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction

Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification (B) Heating and dehumidification at almost constant wet bulb temperature (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Description : Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification ... (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Last Answer : (B) Heating and dehumidification at almost constant wet bulb temperature

The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration

Description : The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration

Last Answer : d) kW / Ton of Refrigeration

Weight of 1 m3 of humid air as compared to 1 m3 of dry air, under the same conditions, is (A) Less (B) More (C) Same (D) Unpredictable

Description : Weight of 1 m3 of humid air as compared to 1 m3 of dry air, under the same conditions, is (A) Less (B) More (C) Same (D) Unpredictable

Last Answer : (A) Less

Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Description : Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Last Answer : Answer : a

The specific volume of air is expressed as the volume of: a. 1 kg of air at 101.325 kPa in cm3 b. 0.833 kg of air at standard pressure and temperature in m3 c. 1 kg of air at 101.325 kPa and 21 degrees Celsius in m3 d. 1 g of air occupied at any temperature and pressure e. 1 kg of air, regardless of temperature and pressure

Description : The specific volume of air is expressed as the volume of: a. 1 kg of air at 101.325 kPa in cm3 b. 0.833 kg of air at standard pressure and temperature in m3 c. 1 kg of air at 101.325 ... d. 1 g of air occupied at any temperature and pressure e. 1 kg of air, regardless of temperature and pressure

Last Answer : Answer: C

The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Last Answer : (A) 3.6 AVS.ρ

If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is (A) 0.31 (B) 0.107 (C) 0.017 (D) 0.215

Description : If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is (A) 0.31 (B) 0.107 (C) 0.017 (D) 0.215

Last Answer : (D) 0.215

Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat of the substance): 0.20 kCal/kg oC DT (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Last Answer : 21600

An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively. The humidity of air sample expressed as kg of water vapour/kg of dry air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Description : An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively ... air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Last Answer : (D) 0.152

The volume of standard air is _____ m3/kg of dry air. a. 0.533 b. 0.633 c. 0.733 d. 0.833 e. 0.933

Description : The volume of standard air is _____ m3/kg of dry air. a. 0.533 b. 0.633 c. 0.733 d. 0.833 e. 0.933

Last Answer : Answer: D

An odd shaped body weighing 7.5 kg and occupying 0.01 m3 volume will be completely submerged in a fluid having specific gravity of (A) 1 (B) 1.2 (C) 0.8 (D) 0.75

Description : An odd shaped body weighing 7.5 kg and occupying 0.01 m3 volume will be completely submerged in a fluid having specific gravity of (A) 1 (B) 1.2 (C) 0.8 (D) 0.75

Last Answer : Answer: Option D

A liquid compressed in cylinder has a volume of 0.04 m3 at 50 kg/cm² and a volume of 0.039 m3 at 150 kg/cm². The bulk modulus of elasticity of liquid is (A) 400 kg/cm² (B) 4000 kg/cm² (C) (D)

Description : A liquid compressed in cylinder has a volume of 0.04 m3 at 50 kg/cm² and a volume of 0.039 m3 at 150 kg/cm². The bulk modulus of elasticity of liquid is (A) 400 kg/cm² (B) 4000 kg/cm² (C) (D)

Last Answer : Answer: Option B

Humid volume, at a given temperature is a/an __________ function of humidity. (A) Inverse (B) Exponential (C) Linear (D) Logarithmic

Description : Humid volume, at a given temperature is a/an __________ function of humidity. (A) Inverse (B) Exponential (C) Linear (D) Logarithmic

Last Answer : (C) Linear

The humid volume may be increased by increasing the (A) Temperature at constant humidity (B) Humidity at constant temperature (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The humid volume may be increased by increasing the (A) Temperature at constant humidity (B) Humidity at constant temperature (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

When `PtE_(6)` vapour mixed with an equal volume of Xe, the gases combined immediatedly at room temperature and produces a yellow solid X at `66^(@)C`

Description : When `PtE_(6)` vapour mixed with an equal volume of Xe, the gases combined immediatedly at room temperature and produces a yellow solid X at `66^(@)C`

Last Answer : When `PtE_(6)` vapour mixed with an equal volume of Xe, the gases combined immediatedly at room temperature and produces ... ]^(+) [Pt_(2)F_(11)]^(-)`

In acoustics, if the volume of the room is 200 m3 then at what frequency the coefficient of absorption is measured? A. 120 kHz B. 120 Hz C. 100 Hz D. 150 Hz

Description : In acoustics, if the volume of the room is 200 m3 then at what frequency the coefficient of absorption is measured? A. 120 kHz B. 120 Hz C. 100 Hz D. 150 Hz

Last Answer : B. 120 Hz

Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge stream is mixed with superheated steam at 400 0C, 1 atm and specific volume of 3.11 m 3 /kg. Calculate the amount of superheated steam at 300 0C produced and the volumetric flow rate of the 400 0C steam.

Description : Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C  and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge ... amount of superheated steam at 300 0C produced and the volumetric flow rate of the  400 0C steam.

Last Answer : Solution 1. Mass balance of water 1200 + m1 = m2 ………………………………………… (1) …………………….1 mark 2. Energy balance (1200 kg/h)(2676 kJ/kg) + m1(3278 kJ/kg)

A gas (density = 1.5 kg/m3 , viscosity = 2 × 10 ‒5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The pressure drop for another gas, with density of 1.5 kg/m3and viscosity of 3 × 10 ‒5kg/m.s flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Description : A gas (density = 1.5 kg/m3 , viscosity = 2 10 -5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The ... flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Last Answer : (B) 12600 Pa/m

Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated liquid can absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Description : Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated ... absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Last Answer : An ideal gas is a gas that is not a superheated vapor

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

In saturated gas, the (A) Vapour is in equilibrium with the liquid at the gas temperature (B) Vapour is in equilibrium with the liquid at the room temperature (C) Partial pressure of vapour equals the vapour pressure of the liquid at room temperature (D) None of these

Description : In saturated gas, the (A) Vapour is in equilibrium with the liquid at the gas temperature (B) Vapour is in equilibrium with the liquid at the room temperature (C) Partial pressure of vapour equals the vapour pressure of the liquid at room temperature (D) None of these

Last Answer : (A) Vapour is in equilibrium with the liquid at the gas temperature

Relative humidity is the ratio of the (A) Partial pressure of the vapour to the vapour pressure of the liquid at room temperature (B) Partial pressure of the vapour to the vapour pressure of the liquid at gas temperature (C) Actual humidity to saturation humidity (D) None of these

Description : Relative humidity is the ratio of the (A) Partial pressure of the vapour to the vapour pressure of the liquid at room temperature (B) Partial pressure of the vapour to the vapour pressure of the liquid at gas temperature (C) Actual humidity to saturation humidity (D) None of these

Last Answer : (B) Partial pressure of the vapour to the vapour pressure of the liquid at gas temperatur

According to IS:456-2000, the total acid soluble chlorides in concrete is restricted to________ of concrete [ A ] 0.2 kg/m3 [ B ] 0.4 kg/m3 [ C ] 2 kg/m3 [ D ] 4 kg/m3

Description : According to IS:456-2000, the total acid soluble chlorides in concrete is restricted to________ of concrete [ A ] 0.2 kg/m3 [ B ] 0.4 kg/m3 [ C ] 2 kg/m3 [ D ] 4 kg/m3

Last Answer : [ B ] 0.4 kg/m3

According to IS:456-2000, the total acid soluble chlorides in concrete is restricted to________ of concrete [ A ] 0.2 kg/m3 [ B ] 0.4 kg/m3 [ C ] 2 kg/m3 [ D ] 4 kg/m3

Description : According to IS:456-2000, the total acid soluble chlorides in concrete is restricted to________ of concrete [ A ] 0.2 kg/m3 [ B ] 0.4 kg/m3 [ C ] 2 kg/m3 [ D ] 4 kg/m3

Last Answer : [ B ] 0.4 kg/m3

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to that of vapour phase (B) Vapour phase behaves as an ideal gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Description : To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to ... gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Description : The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Last Answer : (A) 500

The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller

Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller

Last Answer : kW/Ton of Refrigeration

The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER

Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER

Last Answer : kW/Ton of Refrigeration

Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into heating the roof. The specific heat of concrete is about 900 J/kg, and the density is about 2,300 kg/m3 .  a. 7.9 °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

When vapour is cooled at constant total system volume, the _______ changes. A Volume. B PRESSURE C Temperature. D None of the mentioned.

Description : When vapour is cooled at constant total system volume, the _______ changes. A Volume. B PRESSURE C Temperature. D None of the mentioned.

Last Answer : B PRESSURE

When vapour is cooled at constant total system volume, the _______ changes. A] Volume. B] Pressure C] Temperature. D] None of the mentioned

Description : When vapour is cooled at constant total system volume, the _______ changes. A] Volume. B] Pressure C] Temperature. D] None of the mentioned

Last Answer : B] Pressure

Will Osama Bin laden die before he has the chance to see the inside of a court room?

Description : Will Osama Bin laden die before he has the chance to see the inside of a court room?

Last Answer : I heard a story once suggesting that he died some years back of kidney failure. I don’t believe it, but I’d say that it couldn’t happen to a better person.

A bed consists of particles of density 2000 kg/m3 . If the height of the bed is 1.5 metres and its porosity 0.6, the pressure drop required to fluidise the bed by air is (A) 25.61 kPa (B) 11.77 kPa (C) 14.86 kPa (D) 21.13 kPa

Description : A bed consists of particles of density 2000 kg/m3 . If the height of the bed is 1.5 metres and its porosity 0.6, the pressure drop required to fluidise the bed by air is (A) 25.61 kPa (B) 11.77 kPa (C) 14.86 kPa (D) 21.13 kPa

Last Answer : (B) 11.77 kPa

The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Description : The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Last Answer : (A) 3.6 W.D.V.ρ

Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m). (A) 3.6 V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Last Answer : (A) 3.6 V.W.Dr.ρ

Calorific value of pitch creosote mixture (PCM) i.e., C.T.F.-200 is about (A) 8800 kcal/m3 (B) 8800 kcal/kg (C) Same as that of coal middling (D) 25000 kcal/kg

Description : Calorific value of pitch creosote mixture (PCM) i.e., C.T.F.-200 is about (A) 8800 kcal/m3 (B) 8800 kcal/kg (C) Same as that of coal middling (D) 25000 kcal/kg

Last Answer : (B) 8800 kcal/kg

Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500

Description : Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500

Last Answer : (B) 500

Unit of mass velocity is (A) kg/hr (B) kg/m2 . hr (C) kg/m2 (D) kg/m3 . hr

Description : Unit of mass velocity is (A) kg/hr (B) kg/m2 . hr (C) kg/m2 (D) kg/m3 . hr

Last Answer : (B) kg/m2 . hr

. A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Description : . A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Last Answer : (A) 4.4 KPa

Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Description : Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Last Answer : (B) 60

For an incompressible fluid, the bulk modulus of elasticity is (A) 5 kg/m3 (B) ∞ N/m2 (C) 1 N (D) 0 N/m

Description : For an incompressible fluid, the bulk modulus of elasticity is (A) 5 kg/m3 (B) ∞ N/m2 (C) 1 N (D) 0 N/m

Last Answer : (B) ∞ N/m2

At absolute zero, volume of gas is equal to A. 0 m3 B. 1 m3 C. 2 m3 D. 3 m3

Description : At absolute zero, volume of gas is equal to A. 0 m3 B. 1 m3 C. 2 m3 D. 3 m3

Last Answer : 0 m3

A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Description : A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Last Answer : 12 kJ