When a multistage tray tower uses a minimum reflux ratio, it implies (A) Infinite trays and maximum reboiler heat load (B) Infinite trays and minimum reboiler heat load (C) Minimum trays and minimum reboiler heat load (D) Minimum trays and maximum reboiler heat load

When a multistage tray tower uses a minimum reflux ratio, it implies
(A) Infinite trays and maximum reboiler heat load
(B) Infinite trays and minimum reboiler heat load
(C) Minimum trays and minimum reboiler heat load
(D) Minimum trays and maximum reboiler heat load
by

1 Answer

Answer :

(A) Infinite trays and maximum reboiler heat load
by

Related questions

Minimum reflux ratio in a distillation column results in (A) Optimum number of trays (B) Minimum reboiler size (C) Maximum condenser size (D) Minimum number of trays

Description : Minimum reflux ratio in a distillation column results in (A) Optimum number of trays (B) Minimum reboiler size (C) Maximum condenser size (D) Minimum number of trays

Last Answer : (C) Maximum condenser size

Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of theoretical plate calculation for distillation column (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state, (A) Composition of vapors and that of liquid do not vary throughout the column (B) Reboiler load and condenser load are minimum (C) The top and bottom compositions are unchanged with and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Description : A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are ... and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Last Answer : (D) The top and bottom compositions correspond to the maximum enrichment available

In case of binary distillation, increasing the reflux ratio above optimum does not result in the increase of (A) Area between operating line and 45° diagonal x-y diagram (B) Condenser and reboiler surfaces (C) Tower cross-section (D) None of these

Description : In case of binary distillation, increasing the reflux ratio above optimum does not result in the increase of (A) Area between operating line and 45° diagonal x-y diagram (B) Condenser and reboiler surfaces (C) Tower cross-section (D) None of these

Last Answer : (A) Area between operating line and 45° diagonal x-y diagram

Total reflux in a distillation operation requires minimum (A) Reboiler load (B) Number of plates (C) Condenser load (D) All (A), (B) and (C)

Description : Total reflux in a distillation operation requires minimum (A) Reboiler load (B) Number of plates (C) Condenser load (D) All (A), (B) and (C)

Last Answer : (B) Number of plates

On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in (A) Greater degree of separation with a fixed number of trays (B) Increased reboiler load

Description : On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in (A) Greater degree of separation with a fixed number of trays (B) Increased reboiler load

Last Answer : (C) Increased reflux ratio

Can the efficiency of a plate in the distillation tower be greater than 100%? (A) Yes (B) Normally not; but is possible if infinite number of plates are put(C) Never(D) Yes; if the reflux ratio is maximum

Description : Can the efficiency of a plate in the distillation tower be greater than 100%? (A) Yes (B) Normally not; but is possible if infinite number of plates are put (C) Never (D) Yes; if the reflux ratio is maximum

Last Answer : (C) Never

Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Description : Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Last Answer : (B) Use of increased tray spacing

. In a distillation column, with increase in the reflux ratio, the heat removed in the cooler (A) Increases (B) Decreases (C) Remains unaffected (D) And the heat required in reboiler decreases

Description : . In a distillation column, with increase in the reflux ratio, the heat removed in the cooler (A) Increases (B) Decreases (C) Remains unaffected (D) And the heat required in reboiler decreases

Last Answer : (A) Increases

The operating cost of a distillation column at minimum reflux ratio is (A) Minimum (B) Maximum (C) Infinite (D) Zero

Description : The operating cost of a distillation column at minimum reflux ratio is (A) Minimum (B) Maximum (C) Infinite (D) Zero

Last Answer : (A) Minimum

For a binary mixture with low relative volatility, continuous rectification to get pure products will require (A) Low reflux ratio (B) Less number of trays (C) Small cross-section column (D) High reflux ratio

Description : For a binary mixture with low relative volatility, continuous rectification to get pure products will require (A) Low reflux ratio (B) Less number of trays (C) Small cross-section column (D) High reflux ratio

Last Answer : (D) High reflux ratio

In McCabe-Thiele method, at infinite reflux ratio (A) The overhead product is minimum (B) Both the operating lines coincide with diagonal (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In McCabe-Thiele method, at infinite reflux ratio (A) The overhead product is minimum (B) Both the operating lines coincide with diagonal (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) The overhead product is minimum

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

Absorption (liquid-gas system) with evolution of heat as compared to isothermal absorption results in (A) Decreased solute solubility (B) Large minimum liquid to gas (L/G) ratio (C) Large number of trays(D) All (A), (B) and (C)

Description : Absorption (liquid-gas system) with evolution of heat as compared to isothermal absorption results in (A) Decreased solute solubility (B) Large minimum liquid to gas (L/G) ratio (C) Large number of trays (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In McCabe-Thiele method, at infinite reflux ratio (A) Number of plates is maximum (B) Overhead product is maximum (C) Both the operating lines coincide with the diagram (D) None of these

Description : In McCabe-Thiele method, at infinite reflux ratio (A) Number of plates is maximum (B) Overhead product is maximum (C) Both the operating lines coincide with the diagram (D) None of these

Last Answer : (C) Both the operating lines coincide with the diagram

Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a suitable membrane is called dialysis (C) Freeze drying is used for the drying of fish (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Description : Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a ... is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Last Answer : (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

what is she puts 6 cookies on each tray if there are 9 trays how many are them?

Description : what is she puts 6 cookies on each tray if there are 9 trays how many are them?

Last Answer : 81

Fenske equation determines the (A) Maximum number of ideal plates (B) Height of the distillation column (C) Minimum number of theoretical plates (D) Optimum reflux ratio

Description : Fenske equation determines the (A) Maximum number of ideal plates (B) Height of the distillation column (C) Minimum number of theoretical plates (D) Optimum reflux ratio

Last Answer : (C) Minimum number of theoretical plates

For a distillation column operating at minimum reflux, the (A) Concentration of liquid and vapour leaving a plate will be same (B) Reflux ratio will be maximum (C) Number of plates required will be maximum

Description : For a distillation column operating at minimum reflux, the (A) Concentration of liquid and vapour leaving a plate will be same (B) Reflux ratio will be maximum (C) Number of plates required will be maximum

Last Answer : (C) Number of plates required will be maximum

Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant. (A) Agitated vessel (B) Sieve tray column (C) Bubble cap column (D) Packed tower

Description : Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant. (A) Agitated vessel (B) Sieve tray column (C) Bubble cap column (D) Packed tower

Last Answer : (A) Agitated vessel

Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Description : Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Last Answer : (A) Wetted wall

Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty? (A) Grid tray tower (B) Perforated tray tower (C) Wetted wall tower (D) Bubble cap tower

Description : Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty? (A) Grid tray tower (B) Perforated tray tower (C) Wetted wall tower (D) Bubble cap tower

Last Answer : (D) Bubble cap tower

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

In which system is Cooling of hot water is done on tray as step by? a) Mechanical draught cooling system b) Hyperbolic cooling tower c) Atmospheric cooling tower d) Wet cooling tower

Description : In which system is Cooling of hot water is done on tray as step by? a) Mechanical draught cooling system b) Hyperbolic cooling tower c) Atmospheric cooling tower d) Wet cooling tower

Last Answer : Atmospheric cooling tower

In which system is Cooling of hot water is done on tray as step by? a. Mechanical draught cooling system b. Hyperbolic cooling tower c. Atmospheric cooling tower d. Wet cooling tower

Description : In which system is Cooling of hot water is done on tray as step by? a. Mechanical draught cooling system b. Hyperbolic cooling tower c. Atmospheric cooling tower d. Wet cooling tower

Last Answer : Atmospheric cooling tower

. In which system is Cooling of hot water is done on tray as step by? a) Mechanical draught cooling system b) Hyperbolic cooling tower c) Atmospheric cooling tower d) Wet cooling tower

Description : . In which system is Cooling of hot water is done on tray as step by? a) Mechanical draught cooling system b) Hyperbolic cooling tower c) Atmospheric cooling tower d) Wet cooling tower

Last Answer : Atmospheric cooling tower

The minimum number of theoretical plates is required for achieving a given separation in distillation column with (A) No reflux (B) Total reflux (C) Zero reflux ratio (D) Minimum reflux ratio

Description : The minimum number of theoretical plates is required for achieving a given separation in distillation column with (A) No reflux (B) Total reflux (C) Zero reflux ratio (D) Minimum reflux ratio

Last Answer : (B) Total reflux

As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first and then more and more rapidly (C) Total cost first decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Description : As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first ... decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Last Answer : (C) Total cost first decreases and then increases

At minimum reflux ratio for a given separation (A) Number of plates is zero (B) Number of plates is infinity (C) Minimum number of the theoretical plates is required (D) Separation is most efficient

Description : At minimum reflux ratio for a given separation (A) Number of plates is zero (B) Number of plates is infinity (C) Minimum number of the theoretical plates is required (D) Separation is most efficient

Last Answer : (B) Number of plates is infinity

At what value of reflux ratio, number of theoretical plates in a distillation column is minimum? (A) 0 (B) 1 (C) ∞ (D) < 1

Description : At what value of reflux ratio, number of theoretical plates in a distillation column is minimum? (A) 0 (B) 1 (C) ∞ (D) < 1

Last Answer : (C) ∞

If Rm is the minimum reflux ratio, the optimum reflux ratio may be around __________ Rm. (A) 1.2 to 1.5 (B) 2.5 to 3 (C) 3 to 4 (D) 5

Description : If Rm is the minimum reflux ratio, the optimum reflux ratio may be around __________ Rm. (A) 1.2 to 1.5 (B) 2.5 to 3 (C) 3 to 4 (D) 5

Last Answer : (A) 1.2 to 1.5

For water-ethanol system, the minimum reflux ratio (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve (B) Is computed from the intercept of the operating line (C) Cannot be computed (D) Is the optimum reflux ratio

Description : For water-ethanol system, the minimum reflux ratio (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve (B) Is computed from the intercept of the operating line (C) Cannot be computed (D) Is the optimum reflux ratio

Last Answer : (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve

In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Description : In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Last Answer : (A) Total

At __________ reflux, theoretical number of plates in a distillation coloumn is calculated using Fenske-Underwood equation. (A) Operating (B) Total (C) Minimum (D) Maximum permissible

Description : At __________ reflux, theoretical number of plates in a distillation coloumn is calculated using Fenske-Underwood equation. (A) Operating (B) Total (C) Minimum (D) Maximum permissible

Last Answer : (B) Total

For a multistage compressor, the polytropic efficiency is A. the efficiency of all stages combined together B. the efficiency of one stage C. Constant throughout for all the stages D. a direct consequence of the pressure ratio

Description : For a multistage compressor, the polytropic efficiency is A. the efficiency of all stages combined together B. the efficiency of one stage C. Constant throughout for all the stages D. a direct consequence of the pressure ratio

Last Answer : ANSWER : C

For a fixed number of ideal stages in a distillation column, as the reflux ratio is increased, the difference in composition between the top and bottomproduct streams(A) Increases(B) Decreases(C) Remain unaffected(D) Passes through a maximum

Description : For a fixed number of ideal stages in a distillation column, as the reflux ratio is increased, the difference in composition between the top and bottom product streams (A) Increases (B) Decreases (C) Remain unaffected (D) Passes through a maximum

Last Answer : (A) Increases

Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1 (C) When a vertical plate is heated in infinite air environmental under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Description : Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 ... under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Last Answer : (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1

The speed at which the shaft runs so that the additional deflection of the shaft from the axis of rotation becomes ___________, is known as critical or whirling speed. (A) zero (B) minimum (C) maximum (D) infinite

Description : The speed at which the shaft runs so that the additional deflection of the shaft from the axis of rotation becomes ___________, is known as critical or whirling speed. (A) zero (B) minimum (C) maximum (D) infinite

Last Answer : (D) infinite

If the stress produced by a prismatic bar is equal to the working stress, the area of the cross￾section of the prismatic bar, becomes (A) Zero (B) Infinite (C) Maximum (D) Minimum

Description : If the stress produced by a prismatic bar is equal to the working stress, the area of the cross￾section of the prismatic bar, becomes  (A) Zero  (B) Infinite  (C) Maximum  (D) Minimum

Last Answer : (B) Infinite 

The direct cost of a project with respect to normal time is (A) minimum (B) Maximum (C) Zero (D) Infinite

Description : The direct cost of a project with respect to normal time is (A) minimum (B) Maximum (C) Zero (D) Infinite

Last Answer : (A) minimum

When a motor is just started, back emf is almost ______: a. Infinite b. zero c. minimum d. maximum

Description : When a motor is just started, back emf is almost ______: a. Infinite b. zero c. minimum d. maximum

Last Answer : d. maximum

The endurance or fatigue limit is defined as the maximum value of the stress which a polished standard specimen can withstand without failure, for infinite number of cycles, when subjected to (a) static load (b) dynamic load (c) static as well as dynamic load (d) completely reversed load

Description : The endurance or fatigue limit is defined as the maximum value of the stress which a polished standard specimen can withstand without failure, for infinite number of cycles, when subjected to (a) static load (b) dynamic load (c) static as well as dynamic load (d) completely reversed load

Last Answer : (d) completely reversed load

Which of the following is considered equivalent to one theoretical stage in Mc-Cabe Thiele's method? (A) Partial condenser (B) Total condenser (C) Reboiler (D) Both (B) and (C)

Description : Which of the following is considered equivalent to one theoretical stage in Mc-Cabe Thiele's method? (A) Partial condenser (B) Total condenser (C) Reboiler (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Reboiler is considered as one theoretical plate, because (A) Of the assumption that vapour and liquid leaving the reboiler are in equilibrium (B) Vapour is recycled to the column (C) Reboiler itself contains one plate (D) None of these

Description : Reboiler is considered as one theoretical plate, because (A) Of the assumption that vapour and liquid leaving the reboiler are in equilibrium (B) Vapour is recycled to the column (C) Reboiler itself contains one plate (D) None of these

Last Answer : (A) Of the assumption that vapour and liquid leaving the reboiler are in equilibrium

What are some of the consequences of an undersized kettle type reboiler?

Description : What are some of the consequences of an undersized kettle type reboiler?

Last Answer : The effect will be a decrease in the boiling coefficient. A boiling coefficient depends on a nucleate boiling component and a two-phase component that depends on the recirculation rate. An ... entrainment or even a two-phase mixture going back to the tower. Source: Gulley Computer Associates

What factors go into designing the vapor space of kettle type reboiler?

Description : What factors go into designing the vapor space of kettle type reboiler?

Last Answer : The size of the kettle is determined by several factors. One factor is to provide enough space to slow the vapor velocity down enough for nearly all the liquid droplets to fall back down by ... is typically 8 inches. It is higher for high heat flux kettles. Source: Gulley Computer Associates