Which is the controlling factor for a drum drier? (A) Diffusion (B) Heat transfer

Which is the controlling factor for a drum drier?
(A) Diffusion
(B) Heat transfer
by

1 Answer

Answer :

(B) Heat transfer
by

Related questions

Which of the following is not a continuous drier? (A) Drum drier (B) Spray drier (C) Tunnel drier (D) Tray drier

Description : Which of the following is not a continuous drier? (A) Drum drier (B) Spray drier (C) Tunnel drier (D) Tray drier

Last Answer : (D) Tray drier

Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Description : Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Last Answer : (A) Rotary

Which of the following is a controlling factor in very fast heterogeneous reaction? (A) Heat and mass transfer effects (B) Pressure (C) Temperature (D) Composition of reactant

Description : Which of the following is a controlling factor in very fast heterogeneous reaction? (A) Heat and mass transfer effects (B) Pressure (C) Temperature (D) Composition of reactant

Last Answer : (A) Heat and mass transfer effects

The controlling resistance in a rotary drum vacuum filter is the __________ resistance.(A) Piping (B) Cake (C) Filter medium (D) None of these

Description : The controlling resistance in a rotary drum vacuum filter is the __________ resistance. (A) Piping (B) Cake (C) Filter medium (D) None of these

Last Answer : (B) Cake

JD factor for mass transfer is a function of Reynolds number. Mass transfer by molecular diffusion from a single drop to surrounding still air is given by (A) Nsh = 2 (B) Nst = 2 (C) Nsc = 2 (D) None of these

Description : JD factor for mass transfer is a function of Reynolds number. Mass transfer by molecular diffusion from a single drop to surrounding still air is given by (A) Nsh = 2 (B) Nst = 2 (C) Nsc = 2 (D) None of these

Last Answer : (A) Nsh = 2

Controlling heat transfer film co-efficient is the one, which offers __________ resistance to heat transfer. (A) No (B) The least (C) The largest (D) Lower

Description : Controlling heat transfer film co-efficient is the one, which offers __________ resistance to heat transfer. (A) No (B) The least (C) The largest (D) Lower

Last Answer : (C) The largest

__________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction. (A) Gas film diffusion (B) Ash diffusion (C) Chemical reaction (D) None of these

Description : __________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction. (A) Gas film diffusion (B) Ash diffusion (C) Chemical reaction (D) None of these

Last Answer : (C) Chemical reaction

Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Description : Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Last Answer : (B) Film diffusion

For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (C) Chemical reaction

If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Description : If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Last Answer : (B) Porosity is of less importance

For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (B) Diffusion through ash layer

If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Description : If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Last Answer : (A) Film

Analogy between mass and heat transfer is not applicable in case of (A) Same velocity profile or equal eddy diffusivities (B) Thermal or pressure mass diffusion (C) Viscous heating or chemical reaction (D) Both (B) and (C)

Description : Analogy between mass and heat transfer is not applicable in case of (A) Same velocity profile or equal eddy diffusivities (B) Thermal or pressure mass diffusion (C) Viscous heating or chemical reaction (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Which of the following is not a batch drier? (A) Truck drier (B) Agitated pan drier (C) Fluidised bed drier (D) Vacuum shelf drier

Description : Which of the following is not a batch drier? (A) Truck drier (B) Agitated pan drier (C) Fluidised bed drier (D) Vacuum shelf drier

Last Answer : (C) Fluidised bed drier

The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of the following resistance (s) is (are) controlling? (A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Description : The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of ... A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Last Answer : (B) Gas side

Washer and drier - front or top load?

Description : Washer and drier - front or top load?

Last Answer : I personally prefer top loaders. I have had multiples of each. While the front-loading one was better on the clothes and used less water they broke down a lot. It seemed like something would ... really had any problems with even the cheapest of top loaders. Your local laundromat will agree with me.

Why do some bathroom appliances (hair drier, electric ravors, ect) have those buttons on the plug?

Description : Why do some bathroom appliances (hair drier, electric ravors, ect) have those buttons on the plug?

Last Answer : Appliance Leakage Circuit Interrupter to prevent accidental electrocution. It renders the device inoperable in certain abnormal circumstances, like say, immersion in water.

I 'm getting dry day by day I am a 21 year old boy. I have been masturbating for about 4-5 years. But I noticed that one morning at the beginning of 2018, I suddenly woke up. I can't find the reason. My body is deceitful. At night, bad thoughts go round and round in my head. I am very worried about my body. Towards the end of 2019, this problem still exists in me. My body is getting much drier than before. Tell me what to do now ??

Description : I 'm getting dry day by day I am a 21 year old boy. I have been masturbating for about 4-5 years. But I noticed that one morning at the beginning of 2018, I suddenly woke up. I can't find the ... , this problem still exists in me. My body is getting much drier than before. Tell me what to do now ??

Last Answer : : You should give up masturbation altogether. You should also give up pornography , pornographic stories (chati) etc. These are just as physically damaging as they are emotionally damaging. In ... and Adequate amount of blood circulation in the body will eliminate the physical problems. Insha Allah

Want to make thin body fat ? I am 23 years old . But a thin, dry and unhealthy body compared to my age. There is no one in the varsity class who is 2nd drier than me . But I do not mourn any disease. In this case, would you seek the help of a specialist ?

Description : Want to make thin body fat ? I am 23 years old . But a thin, dry and unhealthy body compared to my age. There is no one in the varsity class who is 2nd drier than me . But I do not mourn any disease. In this case, would you seek the help of a specialist ?

Last Answer : You need to eat enough nutritious food. Such as: Vitamins , sugars , proteins , fats, etc. should be eaten. Fish should be eaten more. You can eat Zinc, Multivit, Aristovit, Vita Gold . You can ... a factor as to why they're doing so poorly. (Take these medicines with the advice of any specialist)

Can you put a silk duvet in the drier?

Description : Can you put a silk duvet in the drier?

Last Answer : No, It is not recommended to put a silk duvet in the dryer which will most likely burn the fabric. They are usually from what I've found to be dry-clean only.

Is there a way to vent a drier inside safely?

Description : Is there a way to vent a drier inside safely?

Last Answer : There are a couple ways to vent a dryer, my personal favorite is the dryer vent vacuum. They also have dryer vent hoods, and kits available for installation that will increase the effectiveness of your dryer.

During the monsoon season rainfall decreases from the Ganga delta to the Punjab plains. It is because: (a) monsoon current moves westward along the Ganga plain and becomes drier (b) western regions are warmer than the eastern region (c) hills do not form barriers for winds (d) the area is far away from the sea

Description : During the monsoon season rainfall decreases from the Ganga delta to the Punjab plains. It is because: (a) monsoon current moves westward along the Ganga plain and becomes drier (b) western regions are warmer than ... (c) hills do not form barriers for winds (d) the area is far away from the sea

Last Answer : Ans: (a)

The most important constituent of varnish, is (A) Drier (B) Solvent (C) Resin (D) All the above

Description : The most important constituent of varnish, is (A) Drier (B) Solvent (C) Resin (D) All the above

Last Answer : Answer: Option D

Linseed oil is used in paints as (A) Thinner (B) Vehicle (C) Base (D) Drier

Description : Linseed oil is used in paints as (A) Thinner (B) Vehicle (C) Base (D) Drier

Last Answer : Answer: Option D

Turpentine oil is used in paints as (A) Thinner (B) Vehicle (C) Base (D) Drier

Description : Turpentine oil is used in paints as (A) Thinner (B) Vehicle (C) Base (D) Drier

Last Answer : Answer: Option A

Linseed oil is used in Paints as a a) Vehicle b) Base c) Drier* d) Thinner

Description : Linseed oil is used in Paints as a a) Vehicle b) Base c) Drier* d) Thinner

Last Answer : c) Drier*

Write the applications of spray drier.

Description : Write the applications of spray drier.

Last Answer : Spray drier can be used for drying of: 1) Any substance in solution or suspension 2) Thermolabile substances, 3) Extracts, gelatin citric acid, 4) Soaps and detergents also can be dried using spray drier.

Give principle, working and use of fluidized bed drier.

Description : Give principle, working and use of fluidized bed drier. 

Last Answer : Principle: If a gas is allowed to flow upward through a bed of solid particle at a velocity greater than the settling velocity of the particle, particle partially suspended in the gas stream. The ... process for tablet preparation It is used in coating. Used for drying of filter cake.

Stefan's law describes the mass transfer by (A) Diffusion (B) Bulk flow (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : Stefan's law describes the mass transfer by (A) Diffusion (B) Bulk flow (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b'

Molecular diffusion is caused by the (A) Transfer of molecules from low concentration to high concentration region (B) Thermal energy of the molecules (C) Activation energy of the molecules (D) Potential energy of the molecules

Description : Molecular diffusion is caused by the (A) Transfer of molecules from low concentration to high concentration region (B) Thermal energy of the molecules (C) Activation energy of the molecules (D) Potential energy of the molecules

Last Answer : (B) Thermal energy of the molecules

Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Last Answer : (A) Mass transfer co-efficient

Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Description : Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Last Answer : (D) A counter diffusion at an almost equal molar rate

Component A is diffusing in a medium B. The flux NA relative to a stationary point is equal to the flux due to molecular diffusion, if (A) Mass transfer is accompanied by reaction (B) Diffusion of A is in stagnant medium B (C) Molecular mean free path is high (D) There is equimolar counter diffusion

Description : Component A is diffusing in a medium B. The flux NA relative to a stationary point is equal to the flux due to molecular diffusion, if (A) Mass transfer is accompanied by reaction (B ... stagnant medium B (C) Molecular mean free path is high (D) There is equimolar counter diffusion

Last Answer : (D) There is equimolar counter diffusion

Pick out the wrong statement. (A) The Reynolds analogy for mass transfer is given by Lewis relation and is applicable, when Schmidt number is one (B) Sherwood number for flow in pipes can be expressed as the ratio of the concentration gradient at wall to the overall concentration difference (C) According to film theory for equimolar counter diffusion, the mass transfer coefficient is given by DAB(B)P - 3, Q - 2 (D) The z-component of the total mass flux of a component A in binary mixture of A and B is given by - Dab'.dCA/dz

Description : Pick out the wrong statement. (A) The Reynolds analogy for mass transfer is given by Lewis relation and is applicable, when Schmidt number is one (B) Sherwood number for flow in pipes can be expressed ... flux of a component A in binary mixture of A and B is given by - Dab'.dCA/dz

Last Answer : (C) According to film theory for equimolar counter diffusion, the mass transfer coefficient is given by DAB(B)P - 3, Q - 2

The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving force. and, Kp= M.T.C. for diffusion of a gas through a stagnant inert gas with pressure as driving force.) (A) Kc = Kp = Km (B) Kc = Kp /RT = Km . RT/P (C) Kc = Kp . RT = Km . RT/p (D) None of these

Description : The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving ... (C) Kc = Kp . RT = Km . RT/p (D) None of these

Last Answer : (C) Kc = Kp . RT = Km . RT/p

Experimental determination of __________ is done by wetted wall column method. (A) Diffusion co-efficient (B) Mass transfer co-efficient (C) NTU (D) None of these

Description : Experimental determination of __________ is done by wetted wall column method. (A) Diffusion co-efficient (B) Mass transfer co-efficient (C) NTU (D) None of these

Last Answer : (B) Mass transfer co-efficient

Pick out the wrong statement. (A) Mass transfer co-efficient does not account for gas-liquid diffusion (B) Diffusion co-efficient and mass transfer co-efficient are not same in any mass transfer operation

Description : Pick out the wrong statement. (A) Mass transfer co-efficient does not account for gas-liquid diffusion (B) Diffusion co-efficient and mass transfer co-efficient are not same in any mass transfer operation

Last Answer : (A) Mass transfer co-efficient does not account for gas-liquid diffusion

A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the process is limited by (A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Description : A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the ... A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Last Answer : (A) Diffusion within the pellet

Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below the operating line (C) In case of an absorber, the operating line is always above the equilibrium curve (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Description : Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below ... (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Last Answer : (B) In case of a stripper, the equilibrium curve is always below the operating line

Which of the following is the most controlling factor for the rate of bubble detachment from the hot solid surface? (A) Liquid density (B) Liquid viscosity (C) Hot surface temperature (D) Interfacial tension

Description : Which of the following is the most controlling factor for the rate of bubble detachment from the hot solid surface? (A) Liquid density (B) Liquid viscosity (C) Hot surface temperature (D) Interfacial tension

Last Answer : (D) Interfacial tension

Most important factor affecting threshing efficiency a)peripheral speed of the drum b)cylinder concave clearance c)moisture content of crop d)feed rate

Description : Most important factor affecting threshing efficiency a)peripheral speed of the drum b)cylinder concave clearance c)moisture content of crop d)feed rate

Last Answer : a)peripheral speed of the drum

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Baffles are provided in heat exchangers to increase the (A) Fouling factor (B) Heat transfer area (C) Heat transfer co-efficient (D) Heat transfer rate

Description : Baffles are provided in heat exchangers to increase the (A) Fouling factor (B) Heat transfer area (C) Heat transfer co-efficient (D) Heat transfer rate

Last Answer : (C) Heat transfer co-efficient

jH factor for heat transfer is not a function of the __________ number. (A) Reynolds (B) Nusselt (C) Grashoff (D) Both (B) & (C)

Description : jH factor for heat transfer is not a function of the __________ number. (A) Reynolds (B) Nusselt (C) Grashoff (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

For turbulent flow in a tube, the heat transfer co-efficient is obtained from the Dittus-Boelter correlation. If the tube diameter is halved and the flow rate is doubled, then the heat transfer co-efficient will change by a factor of (A) 1 (B) 1.74 (C) 6.1 (D) 37

Description : For turbulent flow in a tube, the heat transfer co-efficient is obtained from the Dittus-Boelter correlation. If the tube diameter is halved and the flow rate is doubled, then the heat transfer co-efficient will change by a factor of (A) 1 (B) 1.74 (C) 6.1 (D) 37

Last Answer : (C) 6.1

Overall heat transfer co-efficient of a particular tube is U1 . If the same tube with some dirt deposited on either side has coefficient U2 , then (A) U1 = U2 (B) U2 > U1 (C) U1 > U2 (D) U1 = dirt factor - U2

Description : Overall heat transfer co-efficient of a particular tube is U1 . If the same tube with some dirt deposited on either side has coefficient U2 , then (A) U1 = U2 (B) U2 > U1 (C) U1 > U2 (D) U1 = dirt factor - U2

Last Answer : (A) U1 = U2

jH factor for heat transfer depends upon the __________ number. (A) Biot (B) Nusselt (C) Reynolds (D) Prandtl

Description : jH factor for heat transfer depends upon the __________ number. (A) Biot (B) Nusselt (C) Reynolds (D) Prandtl

Last Answer : (C) Reynolds