Diesel index (an alternative index for expressing the quality of diesel) is
(A) Determined by using a test engine
(B) Not related to aniline point
(C) Equal to cetane number plus 3
(D) All (A), (B) & (C)

1 Answer

Answer :

(C) Equal to cetane number plus 3

Related questions

Description : High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor

Last Answer : (B) It is highly paraffinic in nature

Description : Aniline point is the temperature at which (A) Equal weight of diesel & the aniline are completely miscible (B) Equal weight of aniline & the test sample are completely miscible (C) Equal volume of aniline & the test sample are completely miscible (D) Aniline vaporises

Last Answer : (C) Equal volume of aniline & the test sample are completely miscible

Description : Diesel index is defined as (A) (°API) × (Aniline Point, °F)/100 (B) (°API) × (Aniline Point, °C)/100 (C) (°API) × (100)/Aniline Point, °F (D) (°API) × (100)/Aniline Point, °C

Last Answer : (A) (°API) × (Aniline Point, °F)/100

Description : High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

Last Answer : (C) Is highly paraffinic

Description : The tendency of a diesel engine to knock increases if a. engine speed is increased b. engine power is increased c. cetane number of the fuel is increased d. compression ratio is increased

Last Answer : ANSWER d. compression ratio is increased

Description : A fuel of cetane number 40 has the same ignition quality as a mixture of a) 40% cetane and 60% alpha methyl naphthalene b) 40% alpha methyl naphthalene and 60% cetane c) 40% petrol and 60% diesel d) 40% diesel and 60% petrol

Last Answer : Answer: a Explanation: A fuel of cetane number 40 has the same ignition quality as a mixture of 40% cetane and 60% alpha methyl naphthalene as cetane number is counted on cetane percentage.

Description : Ignition quality of diesel is expressed by a. octane number b. cetane number c. calorific value d. carbon content

Last Answer : ANSWER b. cetane number

Description : Cetane number of a diesel fuel is the measure of its (A) Ignition delay (B) Smoke point (C) Viscosity (D) Oxidation stability

Last Answer : (A) Ignition delay

Description : Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Last Answer : (C) Petrol increases its octane number

Description : Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) ... (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Last Answer : (C) Same as

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Description : Cetane number of diesel used in trucks may be about (A) 50 (B) 14 (C) 35 (D) 85

Last Answer : (A) 50

Description : Which of the following additives improves the cetane number of diesel? (A) Amyl nitrate (B) Ethyl mercaptan (C) Naphthenic acid (D) Tetra ethyl lead

Last Answer : (B) Ethyl mercaptan

Description : Cetane number of high speed diesel must be ≥ (A) 30 (B) 45 (C) 75 (D) 95

Last Answer : (B) 45

Description : Diesel used in naval applications has a minimum cetane number of (A) 25 (B) 35 (C) 45 (D) 65

Last Answer : (C) 45

Description : Which of the following is an additive used for improving the cetane number of diesel? (A) Tetraethyl lead (B) Tetramethyllead (C) Ethyl nitrate or acetone (D) None of these

Last Answer : (A) Tetraethyl lead

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

Description : Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Last Answer : (B) Paraffin

Description : Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline

Last Answer : (C) Naphtha

Description : Aniline point of high speed diesel may be about __________ °C. (A) 35 (B) 70 (C) 105 (D) 150

Last Answer : (B) 70

Description : What would be an equal alternative to the diesel engine in transport trucks?

Last Answer : Really, really, really, really, really strong ostriches, a whole team of them would get up enough speed…eventually.

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

Description : For the best results of efficient combustion, high speed diesel engines need an approximate cetane number of a. 100 b. 50 c. 10 d. 5

Last Answer : ANSWER b. 50

Description : A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (A) Viscosity index

Description : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Last Answer : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Description : Cetane number is a measure of a. ignition quality b. addition in fuel c. calorific value of fuel d. viscosity of the fuel

Last Answer : ANSWER a. ignition quality

Description : Ignition quality of petrol is expressed by a. Octane number b. cetane number c. calorific value d. self-ignition temperature

Last Answer : ANSWER a. Octane number

Description : The quality of petrol is expressed in terms of – (1) Cetane number (2) Gold number (3) Octane number (4) Added unlead compounds

Last Answer : (3) Octane number Explanation: Octane rating or octane number is a standard measure of the of the ignition quality of has (gasoline or petrol). Higher this number, the less ... premature burning in the combustioncharnber) when burnt in a standard (spark-ignition internal combustion) engine.

Description : The quality of petrol is expressed in terms of (1) Cetane number (2) Gold number (3) Octane number (4) Added unlead compounds

Last Answer : Octane number

Description : Index number expressing the relative sizes of both coarse and fine aggregates, is called (A) Proportioning of aggregates (B) Fineness modulus (C) Grading of aggregates (D) None of these

Last Answer : Answer: Option B

Description : Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Last Answer : (C) Aromatic

Description : Which of the following tests is not done for transformer oil? (A) Flash point and acid value (B) Aniline point (C) Dielectric strength (D) Copper strip corrosion test

Last Answer : (B) Aniline poin

Description : Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Last Answer : (B) Octane number

Description : Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Last Answer : (A) 0.42 × (% distilled at 204°C)

Description : Flash point of diesel/kerosene (>50°C) is determined by the (A) Abel apparatus (B) Pensky-Martens apparatus (C) Saybolt chromometer (D) None of these

Last Answer : (A) Abel apparatus

Description : Aniline reacts with bromine water to form (a) Bromobenzene (b) m-Bromoaniline (c) 2,4,6-Tribromoaniline (d) o- plus p-Bromoaniline

Last Answer : 2,4,6-Tribromoaniline

Description : Pick out the correct statement. (A) Compression ratio of an Otto engine is comparatively higher than a diesel engine (B) Efficiency of an Otto engine is higher than that of a diesel ... Diesel engine normally operates at lower compression ratio than an Otto engine for an equal output of work

Last Answer : (B) Efficiency of an Otto engine is higher than that of a diesel engine for the same compression ratio

Description : Reference fuels for knock rating of SI engine fuels would include (a) Iso octane alpha methyl naphthalene (b) Normal octance and aniline (c) Isooctance and n octane (d) N heptane and iso octane

Last Answer : Ans : d

Description : The Philippine Standards on Auditing issued by AASC a. Need to be applied on all audit related. b. Require that in no circumstances would an auditor may judge it necessary to depart from a PSA, ... for the purpose of expressing an opinion. d. Must not apply to other related activities of auditors

Last Answer : Apply to independent examination of financial statements of any entity when such an examination is conducted for the purpose of expressing an opinion.

Description : The Philippine Standards on Auditing issued by AASC: a. Apply to independent examination of financial statements of any entity when such an examination is conducted for the purpose of expressing an ... though such a departure may result to more effective achievement of the objective of an audit

Last Answer : Apply to independent examination of financial statements of any entity when such an examination is conducted for the purpose of expressing an opinion

Description : Spark plug is provided in a/an (A) Engine having carburettor (B) Diesel engine (C) Compression ignition engine (D) Both (B) & (C)

Last Answer : (A) Engine having carburettor

Description : Cetane number of alpha methyl naphthalene is assumed to be (A) 0 (B) 100 (C) 50 (D) ∞

Last Answer : (A) 0

Description : Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Last Answer : (A) Aromatics

Description : Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Last Answer : (C) Luminosity number

Description : For same compression ratio a. Diesel cycle has lower efficiency than Otto cycle b. Diesel cycle has higher efficiency than Otto cycle c. Diesel cycle and Otto cycle have equal efficiencies d. Depends upon the load on engine

Last Answer : Answer a. Diesel cycle has lower efficiency than Otto cycle

Description : Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (C) Aniline point

Description : Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Last Answer : (A) High viscosity index lube oil

Description : High speed diesel A) is used on high speed engine B) has lower fule value then l.s.d per litre. C)both (a) & (b) D)none of the above

Last Answer : C)both (a) & (b)

Description : State the difference between turbocharger & VGT used in diesel engine.

Last Answer : Difference between turbocharger and VGT Sr. No. Parameter Turbocharger VGT 1 Fuel efficiency Lower fuel efficiency as compared to VGT Improved fuel efficiency by20% 2 ... required. 6 Engine response Sluggish response at low speeds Quick responsive engine

Description : A mixture containing 65% of iso-octane and 35% of normal heptane will have a) cetane number 65 b) octane number 65 c) cetane number 35 d) octane number 35

Last Answer : Answer: b Explanation: A mixture containing 65% of iso-octane and 35% of normal heptane will have octane number 65 as octane number is the number percentage containing iso-octane.