Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Filtration should be stopped in a filter press, if the
(A) Cake becomes very dense
(B) Liquor stops flowing out to the discharge
(C) Filtration pressure rises suddenly
(D) Both (B) & (C
by

1 Answer

Answer :

(D) Both (B) & (C
by

Related questions

. In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Description : . In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Last Answer : (C) Deplugging the filter medium

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) (A) S (B) 1/R (C) 1/μ (D) All (A), (B) & (C)

Description : Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) (A) S (B) 1/R (C) 1/μ (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre-coated on the filter medium prior to filtration (C) Separated from the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Description : Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Last Answer : (C) Increase the porosity of the cake

A filter press is (A) A batch filter (B) Not suitable, if the liquid is the main product (C) Having prohibitively high maintenance cost (D) Not suitable for wide range of materials under varying operating conditions of cake thickness and pressure

Description : A filter press is (A) A batch filter (B) Not suitable, if the liquid is the main product (C) Having prohibitively high maintenance cost (D) Not suitable for wide range of materials under varying operating conditions of cake thickness and pressure

Last Answer : (A) A batch filter

Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Description : Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Last Answer : (A) Increase the porosity

During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Description : During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Description : In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Last Answer : (C) Laminar

Flow of filtrate through the cake in a plate and frame filter press is best described by the __________ equation. (A) Kozeny-Carman (B) Hagen-Poiseuille’s (C) Fanning's (D) Kremser

Description : Flow of filtrate through the cake in a plate and frame filter press is best described by the __________ equation. (A) Kozeny-Carman (B) Hagen-Poiseuille’s (C) Fanning's (D) Kremser

Last Answer : (A) Kozeny-Carman

Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Description : Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Last Answer : (D) None of these

Shell and leaf filter as compared to plate and frame filter (A) Entails less labor cost(B) Facilitates filtration under higher pressure(C) Provides more effective washing(D) All (A), (B) & (C)

Description : Shell and leaf filter as compared to plate and frame filter (A) Entails less labor cost (B) Facilitates filtration under higher pressure (C) Provides more effective washing (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

If the field circuits of an unloaded salient pole synchronous motor gets suddenly open circuited, then (A) The motor stops. (B) It continues to run at the same speed. (C) Its runs at the slower speed. (D) It runs at a very high speed.

Description : If the field circuits of an unloaded salient pole synchronous motor gets suddenly open circuited, then (A) The motor stops. (B) It continues to run at the same speed. (C) Its runs at the slower speed. (D) It runs at a very high speed.

Last Answer : Ans: B The motor continues to run at the same speed because synchronous motor speed does not depend upon load, Nα f.

Cake resistance is (A) Important in the beginning of filtration (B) Decreased with the time of filtration (C) Independent of pressure drop (D) None of these

Description : Cake resistance is (A) Important in the beginning of filtration (B) Decreased with the time of filtration (C) Independent of pressure drop (D) None of these

Last Answer : (D) None of these

A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The initial pressure drop during filtration is (A) ½w 2 . R 2 . ρL (B) ½w 2 . δ 2 . ρL (C) ½w 2 . δρL (2R + δ) (D) ½w 2 . R . ρL(R + 2δ)

Description : A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The ... . ρL (C) ½w 2 . δρL (2R + δ) (D) ½w 2 . R . ρL(R + 2δ)

Last Answer : (C) ½w 2 . δρL (2R + δ)

Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Description : Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Tank filter (e.g., Nutsche filter) is (A) A high pressure filter (B) A continuous filter (C) Used for small scale filtration work (D) A leaf filter

Description : Tank filter (e.g., Nutsche filter) is (A) A high pressure filter (B) A continuous filter (C) Used for small scale filtration work (D) A leaf filter

Last Answer : (C) Used for small scale filtration work

During washing of filter at the end of constant pressure filtration, the rate of washing equals the rate of filtration (A) At time zero (B) At the end of filtration

Description : During washing of filter at the end of constant pressure filtration, the rate of washing equals the rate of filtration (A) At time zero (B) At the end of filtration

Last Answer : (B) At the end of filtration

A storm is predicted if atmospheric pressure – (1) Rises suddenly (2) Rises gradually (3) Falls suddenly (4) Falls gradually

Description : A storm is predicted if atmospheric pressure – (1) Rises suddenly (2) Rises gradually (3) Falls suddenly (4) Falls gradually

Last Answer : (3) Falls suddenly Explanation: Atmospheric pressure is basically the weight of air in the atmosphere above the reservoir, so the level of mercury continues to change until the weight of mercury in the ... reduces the weight of air above the reservoir so the mercury level drops to a lower level.

A storm is predicted if atmospheric pressure (1) rises suddenly (2) rises gradually (3) falls suddenly (4) falls gradually

Description : A storm is predicted if atmospheric pressure (1) rises suddenly (2) rises gradually (3) falls suddenly (4) falls gradually

Last Answer :  falls suddenly

Which statement regarding air temperature is NOT trueCool air rises and warm air falls.Air heats up more quickly than land.Warm air is less dense than cool air.Air heats up more quickly than water?

Description : Which statement regarding air temperature is NOT trueCool air rises and warm air falls.Air heats up more quickly than land.Warm air is less dense than cool air.Air heats up more quickly than water?

Last Answer : Cool air rises and warm air falls is false. Cool air is denser than warm air, and therefore warm air will rise above cold air.

A balloon filled with helium rises in air because – (1) air exerts an upward force on the balloon (2) the balloon is weightless (3) helium is less dense than air (4) helium pushes down on the air below the balloon

Description : A balloon filled with helium rises in air because – (1) air exerts an upward force on the balloon (2) the balloon is weightless (3) helium is less dense than air (4) helium pushes down on the air below the balloon

Last Answer : (3) helium is less dense than air Explanation: A gas balloon is any balloon that stays aloft due to being filled with a gas less dense than air or lighter than air (such as helium ... balloons) as the dominant form of airship. as balloons remained popular throughout the age before powered flight.

A balloon filled with helium rises in air because (1) air exerts an upward force on the balloon (2) the balloon is weightless (3) helium is less dense than air (4) helium pushes down on the air below the balloon

Description : A balloon filled with helium rises in air because (1) air exerts an upward force on the balloon (2) the balloon is weightless (3) helium is less dense than air (4) helium pushes down on the air below the balloon

Last Answer : helium is less dense than air

A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Description : A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Last Answer : Answer: Option A

Venturimeter is used to (A) Measure the velocity of a flowing liquid (B) Measure the pressure of a flowing liquid (C) Measure the discharge of liquid flowing in a pipe (D) Measure the pressure difference of liquid flowing between two points in a pipe line

Description : Venturimeter is used to (A) Measure the velocity of a flowing liquid (B) Measure the pressure of a flowing liquid (C) Measure the discharge of liquid flowing in a pipe (D) Measure the pressure difference of liquid flowing between two points in a pipe line

Last Answer : Answer: Option C

Check in a centrifugal pump is (A) Provided in the discharge line (B) Generally a globe valve (C) Provided to prevent liquid from backing up through the pump when the pump is turned off or accidently stops running (D) All (A), (B) and (C)

Description : Check in a centrifugal pump is (A) Provided in the discharge line (B) Generally a globe valve (C) Provided to prevent liquid from backing up through the pump when the pump is turned off or accidently stops running (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Two water tanks A and B of equal square base of sides 3 feet are shown below. Water flows from tank A to tank B through a tube. What will be the volume (in cubic feet) of water in Tank A when the water stops flowing?

Description : Two water tanks A and B of equal square base of sides 3 feet are shown below. Water flows from tank A to tank B through a tube. What will be the volume (in cubic feet) of water in Tank A when the water stops flowing? 

Last Answer : 13.5

__________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Description : __________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Last Answer : (C) Pressure filter thickener

When air is warm, it rises and leaves an area of low pressure which becomes filled with sinking cold air. After a hot, sunny day, the land cools faster than the sea. What is likely to happen after a hot, sunny day on the sea shore?

Description : When air is warm, it rises and leaves an area of low pressure which becomes filled with sinking cold air. After a hot, sunny day, the land cools faster than the sea. What is likely to happen after a hot, sunny day on the sea shore?

Last Answer : When air is warm, it rises and leaves an area of low pressure which becomes filled with sinking cold air. After a hot, sunny day, the land cools faster than the sea. What is likely to happen after a hot, sunny day on the sea shore?

A man decided to go for a walk. He made numerous stops during his stroll, hoping to hear some good news each time he stopped. Despite his usual excellent sense of direction, he realized he had been walking in circles. He was certain of this, as he noticed his favorite number 8 kept reappearing before his eyes. After continuing his walk for a long time, he finally received the good news he had been hoping for; and he then returned home, a little poorer than when he had started, but glad to be leaving with the sweet love of his life. What was going on in this bizarre-sounding narrative, and who/what was the sweet love of his life which was mentioned? -Riddles

Description : A man decided to go for a walk. He made numerous stops during his stroll, hoping to hear some good news each time he stopped. Despite his usual excellent sense of direction, he realized he had ... bizarre-sounding narrative, and who/what was the sweet love of his life which was mentioned? -Riddles

Last Answer : The man gave a monetary donation to participate in a cake walk. Eventually, his number was called for the space he was standing on, and he went home with the dessert he truly loved ———— a beautiful cake!

Range of compressibility co-efficient of the commercial compressible cake obtained in filtration operation is (A) 0.01 to 0.1(B) 0.1 to 0.3 (C) 0.2 to 0.8 (D) 0.2 to 0.4

Description : Range of compressibility co-efficient of the commercial compressible cake obtained in filtration operation is (A) 0.01 to 0.1 (B) 0.1 to 0.3 (C) 0.2 to 0.8 (D) 0.2 to 0.4

Last Answer : (C) 0.2 to 0.8

A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Description : A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Last Answer : (B) Incompressible cake and laminar

Do you find it moral when a person becomes quite wealthy from liquor?

Description : Do you find it moral when a person becomes quite wealthy from liquor?

Last Answer : I’m not sure I understand what this has to do with morality.

With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases(B) Increases linearly(C) Decreases(D) Is not affected

Description : With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases (B) Increases linearly (C) Decreases (D) Is not affected

Last Answer : (A) Increases

Filter medium resistance is important during the __________ of filtration. (A) Early stages (B) Final stages (C) Entire process (D) None of these

Description : Filter medium resistance is important during the __________ of filtration. (A) Early stages (B) Final stages (C) Entire process (D) None of these

Last Answer : (A) Early stages

Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Description : Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Last Answer : (A) Open sand

Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Description : Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Last Answer : (B) 3 to 6

Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500(D) 4000 to 5000

Description : Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500 (D) 4000 to 5000

Last Answer : (B) 100 to 200

Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Description : Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Last Answer : (B) Boiling

In a trickling filter A. Filtration process is used B. Biological action is used C. Neither A. nor B. D. Both A. and B.

Description : In a trickling filter A. Filtration process is used B. Biological action is used C. Neither A. nor B. D. Both A. and B.

Last Answer : ANS: B

A world-famous magician and his young assistant were observed walking slowly along in a department store when suddenly they both stopped walking and began to slowly rise from the floor. The two continued to rise majestically until they had reached a height of 20 feet. Numerous store customers and a security guard witnessed the event, but no one seemed shocked by what they had seen, and no report of the occurrence ever reached the news media. The secrets of magic are not supposed to be revealed, but how would you speculate the magician and his assistant accomplished this feat, and why didn’t the onlookers express amazement? -Riddles

Description : A world-famous magician and his young assistant were observed walking slowly along in a department store when suddenly they both stopped walking and began to slowly rise from the floor. The two ... and his assistant accomplished this feat, and why didn't the onlookers express amazement? -Riddles

Last Answer : The magician and his assistant were simply using an escalator to go up to the next floor in the department store.

Is it true that when an alcoholic stops drinking suddenly that he would get sick?

Description : Is it true that when an alcoholic stops drinking suddenly that he would get sick?

Last Answer : Yes, withdrawal can be deadly. It can cause uncontrolled seizures and all sorts of scary things.

You know about those RETRACTABLE pen drives? Does anyone know how to get this type of pen drive working again once it suddenly stops working?

Description : You know about those RETRACTABLE pen drives? Does anyone know how to get this type of pen drive working again once it suddenly stops working?

Last Answer : Is the drive recognized at all? Try it in another computer, if it’s still not working it may be fried.

Fred is listening to the raido when it suddenly stops playing. Nobody is with Fred and nobody touches the radio. A few seconds later, the radio resumes playing.How can this be? -Riddles

Description : Fred is listening to the raido when it suddenly stops playing. Nobody is with Fred and nobody touches the radio. A few seconds later, the radio resumes playing.How can this be? -Riddles

Last Answer : Fred was driving his car through a tunnel.

A truck of mass 5 ton is travelling on a horizontal road with 36 km hr^-1 stops on travelling 1 km after its engine fails suddenly.

Description : A truck of mass 5 ton is travelling on a horizontal road with 36 km hr^-1 stops on travelling 1 km after its engine fails suddenly.

Last Answer : A truck of mass 5 ton is travelling on a horizontal road with 36 km hr-1 stops on travelling ... similar distance same how much will the fraction be?

If a driver in front stops suddenly and a collision occurs it and is the fault of?

Description : If a driver in front stops suddenly and a collision occurs it and is the fault of?

Last Answer : It depends on the state, jurisdiction, and sometimes even theinsurance company; however, in many cases, the vehicle from behindis At Fault.Most traffic investigators (whether they be law enforcement orwith ... time, it'sgenerally because they were following too close to the vehicle infront of them.

If the engine of a motor car moving up with an angle of 45 slope with a speed of 63kmh stops working suddenly how car move before coming to rest if it weighs 19600 and frictional force is 2000?

Description : If the engine of a motor car moving up with an angle of 45 slope with a speed of 63kmh stops working suddenly how car move before coming to rest if it weighs 19600 and frictional force is 2000?

Last Answer : Need answer