In a size reduction crushing operation, the feed size is 10 to 50 mm, while the product size is 2 to 10 mm. This is a case of __________ crushing. (A) Primary (B) Secondary (C) Fine

In a size reduction crushing operation, the feed size is 10 to 50 mm,
while the product size is 2 to 10 mm. This is a case of __________ crushing.
(A) Primary
(B) Secondary
(C) Fine
by

1 Answer

Answer :

(C) Fine
by

Related questions

In a size reduction crushing operation, feed size is 100 to 300 mm. while the product size is 10 to 50 mm. This is a case of the __________ crushing. (A) Primary (B) Secondary (C) Fine (D) Ultrafine

Description : In a size reduction crushing operation, feed size is 100 to 300 mm. while the product size is 10 to 50 mm. This is a case of the __________ crushing. (A) Primary (B) Secondary (C) Fine (D) Ultrafine

Last Answer : (B) Secondary

In a size reduction crushing operation, feed size is 300 to 1500 mm while the product size is 100 to 300 mm. This is a case of the __________ crushing. (A) Secondary (B) Fine (C) Primary (D) Ultrafine

Description : In a size reduction crushing operation, feed size is 300 to 1500 mm while the product size is 100 to 300 mm. This is a case of the __________ crushing. (A) Secondary (B) Fine (C) Primary (D) Ultrafine

Last Answer : (C) Primary

Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size (C) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Description : Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed ... ) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Last Answer : (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size

In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Description : In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will just take hold of a particle and draw it in the crushing zone (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing (D) Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Description : Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will ... Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Last Answer : (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing

Energy consumption in a crusher decreases with increase in the (A) Size of the product (at constant feed size) (B) Capacity of the crushing machine (C) Size of feed (at constant reduction ratio) (D) All (A), (B) & (C)

Description : Energy consumption in a crusher decreases with increase in the (A) Size of the product (at constant feed size) (B) Capacity of the crushing machine (C) Size of feed (at constant reduction ratio) (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not exceed 4 (C) Both the rolls run necessarily at the same speed (D) Reduction ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed

. In case of a hammer crusher, the (A) Feed may be highly abrasive (Moh's scale >5) (B) Minimum product size is 3 mm (C) Maximum feed size may be 50 mm (D) Rotor shaft carrying hammers can be vertical or horizontal

Description : . In case of a hammer crusher, the (A) Feed may be highly abrasive (Moh's scale >5) (B) Minimum product size is 3 mm (C) Maximum feed size may be 50 mm (D) Rotor shaft carrying hammers can be vertical or horizontal

Last Answer : (D) Rotor shaft carrying hammers can be vertical or horizontal

Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of materials (C) Size enlargement (opposite of size reduction) is not a mechanical operation (D) A 'dust catcher' is simply an enlargement in a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Description : Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of ... a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Last Answer : (C) Size enlargement (opposite of size reduction) is not a mechanical operation

Gravity stamp mill is meant for the __________ crushing. (A) Primary (B) Intermediate (C) Fine (D) Ultrafine

Description : Gravity stamp mill is meant for the __________ crushing. (A) Primary (B) Intermediate (C) Fine (D) Ultrafine

Last Answer : (C) Fine

According to Bond crushing law, the work required to form particle of size 'D' from very large feed is (where (S/V)p and (S/V) f are surface to volume ratio of the product and feed respectively). (A) (S/V)p (B) √(S/V)p (C) (S/V) 2 p (D) (S/V) f

Description : According to Bond crushing law, the work required to form particle of size 'D' from very large feed is (where (S/V)p and (S/V) f are surface to volume ratio of the product and feed respectively). (A) (S/V)p (B) √(S/V)p (C) (S/V) 2 p (D) (S/V) f

Last Answer : (B) √(S/V)

Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a particle of a particular size is proportional to the square root of the surface to volume ratio of the product (C) Work required in crushing is proportional to the new surface created (D) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Description : Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a ... ) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Last Answer : (C) Work required in crushing is proportional to the new surface created

Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers (C) States that the work required to form particle of any size from very large feed is proportional to the square root of the volume to surface ratio of the product (D) States that the work required for the crushing is proportional to the new surface created

Description : Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers ( ... (D) States that the work required for the crushing is proportional to the new surface created

Last Answer : (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law

Angle of nip of the crushing rolls does not depend upon the (A) Diameter of the rolls (B) Speed of the rolls (C) Product size (D) Feed size

Description : Angle of nip of the crushing rolls does not depend upon the (A) Diameter of the rolls (B) Speed of the rolls (C) Product size (D) Feed size

Last Answer : (B) Speed of the rolls

Size reduction of the __________ can be suitably done by ball mills, crushing rolls and rod mills. (A) Metalliferous ores (B) Non-metallic ores (C) Basic slags (D) Asbestos & mica

Description : Size reduction of the __________ can be suitably done by ball mills, crushing rolls and rod mills. (A) Metalliferous ores (B) Non-metallic ores (C) Basic slags (D) Asbestos & mica

Last Answer : (A) Metalliferous ores

General crushing equation is given by d(P/m) = -K (dD̅S /D̅ n S ). Bond's crushing law is obtained by solving this equation for n = __________ and feed of infinite size. (A) 1 (B) 1.5 (C) 2 (D) 2.5

Description : General crushing equation is given by d(P/m) = -K (dD̅S /D̅ n S ). Bond's crushing law is obtained by solving this equation for n = __________ and feed of infinite size. (A) 1 (B) 1.5 (C) 2 (D) 2.5

Last Answer : (B) 1.5

Generally the strength of concrete is represented by the crushing stress of concrete cube of size [ A ] 50 mm [ B ] 100 mm [ C ] 150 mm [ D ] 250 mm

Description : Generally the strength of concrete is represented by the crushing stress of concrete cube of size [ A ] 50 mm [ B ] 100 mm [ C ] 150 mm [ D ] 250 mm

Last Answer : [ C ] 150 mm

Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement operation (D) Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should be multiplied with __________ to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Description : Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should ... to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Last Answer : (C) 1.34

Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Description : Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a(A) Buhrstone mill(B) Ball mill(C) Crushing rolls(D) Hammer mill

Description : For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a (A) Buhrstone mill (B) Ball mill (C) Crushing rolls (D) Hammer mill

Last Answer : (A) Buhrstone mill

Size reduction of asbestos and mica is done by (A) Hammer mills (B) Rod mills (C) Gyratory crushers (D) Crushing rolls

Description : Size reduction of asbestos and mica is done by (A) Hammer mills (B) Rod mills (C) Gyratory crushers (D) Crushing rolls

Last Answer : (A) Hammer mills

For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to(A) The new surface created(B) The size reduction ratio(C) The change in volume due to crushing(D) None of these

Description : For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to (A) The new surface created (B) The size reduction ratio (C) The change in volume due to crushing (D) None of these

Last Answer : (A) The new surface created

. Which of the following equations is Rittinger's crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, Ds̅a & D̅sb = volume surface mean diameter of feed & product respectively.) (A) P/m = K/ √Dp (B) P/m = K . ln D̅sa /D̅sb (C) P/m = K . (1/ D̅sb - 1/Ds̅a ) (D) None of these

Description : . Which of the following equations is Rittinger's crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, Ds̅a & D̅sb = volume surface mean diameter of feed & product respectively.) (A) P/m = K/ ... K . ln D̅sa /D̅sb (C) P/m = K . (1/ D̅sb - 1/Ds̅a ) (D) None of these

Last Answer : (C) P/m = K . (1/ D̅sb - 1/Ds̅a )

During size reduction by a jaw crusher, the energy consumed decreases with the (A) Decreasing size of product at constant size of feed (B) Decreasing machine capacity (C) Increasing size of feed at constant reduction ratio (D) None of these

Description : During size reduction by a jaw crusher, the energy consumed decreases with the (A) Decreasing size of product at constant size of feed (B) Decreasing machine capacity (C) Increasing size of feed at constant reduction ratio (D) None of these

Last Answer : (C) Increasing size of feed at constant reduction ratio

Which of the following crushing laws is most accurately applicable to the fine grinding of materials? (A) Bond's crushing law (B) Kick's law (C) Rittinger's law (D) None of these

Description : Which of the following crushing laws is most accurately applicable to the fine grinding of materials? (A) Bond's crushing law (B) Kick's law (C) Rittinger's law (D) None of these

Last Answer : (C) Rittinger's law

Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Description : Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Last Answer : (C) Fine grinding

In case of a ball mill, (A) Coarse feed requires a larger ball (B) Fine feed requires a larger ball (C) Operating speed should be more than the critical speed (D) None of these

Description : In case of a ball mill, (A) Coarse feed requires a larger ball (B) Fine feed requires a larger ball (C) Operating speed should be more than the critical speed (D) None of these

Last Answer : (A) Coarse feed requires a larger ball

A 45-year-old solicitor had an onset of severe, crushing, substernal chest pain while attending a football match. He collapsed on his way to the car. Bystander Cardiorespiratory Resuscitation was begun immediately and continued until arrival in Casualty where an endotracheal tube was inserted and ventilation was maintained on 100% oxygen. Investigations revealed: pH 7.13 PaO2 560 mmHg PaCO2 18 mmHg Bicarbonate 5.8 SaO2 98% Based on these laboratory values, which of the following statements best describes his current pathophysiology? 1) He is demonstrating a primary respiratory alkalosis 2) He probably developed a large right to left intracardiac shunt 3) His anion gap is probably normal 4) His oxyhemoglobin curve is shifted to the left 5) His pulmonary artery pressure is probably elevated

Description : A 45-year-old solicitor had an onset of severe, crushing, substernal chest pain while attending a football match. He collapsed on his way to the car. Bystander Cardiorespiratory Resuscitation ... His oxyhemoglobin curve is shifted to the left 5) His pulmonary artery pressure is probably elevated

Last Answer : Answers-5 This young patient with severe central chest pain has probably arrested due to myocardial infarction and arrhythmia. His gases reveal high PO2 following 100% O2 but severe acidosis ... no left to right shunting and high pulmonary pressures would be expected after this arrest scenario.

The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Half the angle of nip, (α), for a roll crusher is given by (where, dr, dp and df are diameters of crushing rolls, feed particles and rolls gap respectively). (A) cos α = (dr + dp)/(dr + df) (B) cos α = (dr + df)/(dr + dp) (C) tan α = (dr + dp)/(dr + df) (D) sin α = (dr + dp)/(dr + df)

Description : Half the angle of nip, (α), for a roll crusher is given by (where, dr, dp and df are diameters of crushing rolls, feed particles and rolls gap respectively). (A) cos α = (dr + dp)/(dr + df) (B) cos α = (dr + df)/(dr + dp) (C) tan α = (dr + dp)/(dr + df) (D) sin α = (dr + dp)/(dr + df)

Last Answer : (A) cos α = (dr + dp)/(dr + df)

For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Description : For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Last Answer : (B) 10-60

The capacity of a gyratory crusher is __________ that of a jaw crusher with the same gape, handling the same feed & for the same product size range. (A) Same as (B) 2.5 times (C) 5 times (D) 10 times

Description : The capacity of a gyratory crusher is __________ that of a jaw crusher with the same gape, handling the same feed & for the same product size range. (A) Same as (B) 2.5 times (C) 5 times (D) 10 times

Last Answer : (B) 2.5 times

Sizing of very fine particles of the order of 5 to 10 microns is done by elutriation, which is a __________ operation. (A) Clarification(B) Sedimentation(C) Flocculation(D) Classification

Description : Sizing of very fine particles of the order of 5 to 10 microns is done by elutriation, which is a __________ operation. (A) Clarification (B) Sedimentation (C) Flocculation (D) Classification

Last Answer : (D) Classification

Which of the following terminology is not used for size reduction of materials to fine sizes or powders? (A) Comminution (B) Dispersion (C) Pulverisation (D) Compression

Description : Which of the following terminology is not used for size reduction of materials to fine sizes or powders? (A) Comminution (B) Dispersion (C) Pulverisation (D) Compression

Last Answer : (D) Compression

General mechanism of size reduction in intermediate and fine grinder is by (A) Cutting action (B) Compression (C) Compression and tearing (D) Impact and attrition

Description : General mechanism of size reduction in intermediate and fine grinder is by (A) Cutting action (B) Compression (C) Compression and tearing (D) Impact and attrition

Last Answer : (D) Impact and attrition

Froth floatation is used for (A) Washing fine coal dust (< 0.5 mm size) (B) Washing lump coal (> 80 mm size) (C) Removing ash from the coal based on difference in specific gravity of coal and ash

Description : Froth floatation is used for (A) Washing fine coal dust (< 0.5 mm size) (B) Washing lump coal (> 80 mm size) (C) Removing ash from the coal based on difference in specific gravity of coal and ash

Last Answer : (A) Washing fine coal dust (< 0.5 mm size)

In case of a hammer crusher, the final product size depends on the (A) Feed rate (B) Rotor speed(C) Clearance between hammer & grinding plates(D) All (A), (B) and (C

Description : In case of a hammer crusher, the final product size depends on the (A) Feed rate (B) Rotor speed (C) Clearance between hammer & grinding plates (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Description : Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Last Answer : Answer: D

Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Description : Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Last Answer : (A) 0.2 to 0.8

or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Description : or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (C) 500

Pore size of the molecular sieve 5A is __________ mm. (A) 5 (B) 0.5 (C) 0.05 (D) 50

Description : Pore size of the molecular sieve 5A is __________ mm. (A) 5 (B) 0.5 (C) 0.05 (D) 50

Last Answer : (B) 0.5

In case of imprisonment for non-payment of fine, if a part of the fine is paid, such sentence (a) Shall be reduced proportionately (b) Shall not be reduced in direct proportion to the fine paid (c) Shall be reduced but subject to the discretion of the court as to the quantum of reduction (d) All of the above.

Description : In case of imprisonment for non-payment of fine, if a part of the fine is paid, such  sentence (a) Shall be reduced proportionately (b) Shall not be reduced in direct proportion to the fine paid ( ... subject to the discretion of the court as to the quantum of  reduction (d) All of the above.

Last Answer : (a) Shall be reduced proportionately

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Out of the following size reduction equipments, the maximum feed size can be accepted by the (A) Tube mill (B) Ball mill (C) Jaw crusher (D) Jet pulveriser

Description : Out of the following size reduction equipments, the maximum feed size can be accepted by the (A) Tube mill (B) Ball mill (C) Jaw crusher (D) Jet pulveriser

Last Answer : (C) Jaw crusher

Which of the following achieves the least reduction ratio for a given feed size? (A) Jaw crusher (B) Roll crusher (C) Cone crusher (D) Gyratory crusher

Description : Which of the following achieves the least reduction ratio for a given feed size? (A) Jaw crusher (B) Roll crusher (C) Cone crusher (D) Gyratory crusher

Last Answer : (B) Roll crusher

Secondary hardening in steels arises out of the (A) Precipitation of fine alloy carbides at high temperatures (B) Refinement of ferrite grain size by working (C) Decomposition of retained austenite upon heat treatment (D) Precipitation of complex inter-metallic upon heat treatment

Description : Secondary hardening in steels arises out of the (A) Precipitation of fine alloy carbides at high temperatures (B) Refinement of ferrite grain size by working (C) Decomposition of retained austenite upon heat treatment (D) Precipitation of complex inter-metallic upon heat treatment

Last Answer : Option C

There are a multitude of various dressings available. Which of the following statement(s) is/are true concerning options for surgical dressings? a. Hydrocolloids, such as karaya compounds, offer the primary advantage of increased absorptive ability b. Films, such as Op-site, provide a water impermeable environment to achieve a dry wound c. Impregnates are fine gauze impregnated with a variety of substances such as antibiotics or moisturizing agents that adhere tightly to the wound and do not require a secondary dressing d. Absorptive powders and paste are highly useful in debriding necrotic and fibrous material from wounds and absorbing wound serum

Description : There are a multitude of various dressings available. Which of the following statement(s) is/are true concerning options for surgical dressings? a. Hydrocolloids, such as karaya compounds, offer ... are highly useful in debriding necrotic and fibrous material from wounds and absorbing wound serum

Last Answer : Answer: a, d Although the simplest dressing of gauze and tape combined with the use of antibacterial ointment can achieve moist wound healing in most patients. A multitude of other ... agents have high absorbency for tissue wound fluid and debride necrotic and fibrous material from the wound

Reduction ratio of crushers is the (A) Ratio of feed opening to discharge opening (B) Ratio of discharge opening to feed opening (C) Determining factor for minimum dia of the feed and the product (D) None of these

Description : Reduction ratio of crushers is the (A) Ratio of feed opening to discharge opening (B) Ratio of discharge opening to feed opening (C) Determining factor for minimum dia of the feed and the product (D) None of these

Last Answer : (A) Ratio of feed opening to discharge opening

The reduction ratio for grinders is defined as (where, Df and Dp are average diameters of feed and product respectively). (A) Df /Dp (B) Dp /Df (C) Df - Dp (D) None of these

Description : The reduction ratio for grinders is defined as (where, Df and Dp are average diameters of feed and product respectively). (A) Df /Dp (B) Dp /Df (C) Df - Dp (D) None of these

Last Answer : (A) Df /Dp