Cyclones are used primarily for separating (A) Solids (B) Solids from fluids (C) Liquids (D) Solids from solids

Cyclones are used primarily for separating
(A) Solids
(B) Solids from fluids
(C) Liquids
(D) Solids from solids
by

1 Answer

Answer :

(B) Solids from fluids
by

Related questions

Diaphragm pumps are used to transport (A) Solids (B) Liquids (C) Fluids (D) Slurries

Description : Diaphragm pumps are used to transport (A) Solids (B) Liquids (C) Fluids (D) Slurries

Last Answer : (D) Slurries

Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these

Description : Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these

Last Answer : (B) Fine

The process by which fine solids is removed from liquids is termed as (A) Decantation (B) Flocculation (C) Sedimentation (D) Classification

Description : The process by which fine solids is removed from liquids is termed as (A) Decantation (B) Flocculation (C) Sedimentation (D) Classification

Last Answer : (C) Sedimentation

__________ are mixed using ribbon blenders. (A) Lumpy solids and low viscosity liquids (B) Dry powders (C) High viscosity liquids (D) Thick pastes

Description : __________ are mixed using ribbon blenders. (A) Lumpy solids and low viscosity liquids (B) Dry powders (C) High viscosity liquids (D) Thick pastes

Last Answer : (B) Dry powders

Which of the following is generally considered as opaque surface towards radiations? (A) Gases (B) Solids (C) Liquids (D) Both (B) and (C)

Description : Which of the following is generally considered as opaque surface towards radiations? (A) Gases (B) Solids (C) Liquids (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Description : Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Last Answer : (D) All 'a', 'b' & 'c

Particulate' air pollutants are finely divided solids and liquids. Which of the following is not a ‘particulate’? (A) Dust & mists(B) Smoke & fumes(C) Photochemical smog & soot(D) None of these

Description : Particulate' air pollutants are finely divided solids and liquids. Which of the following is not a ‘particulate’? (A) Dust & mists (B) Smoke & fumes (C) Photochemical smog & soot (D) None of these

Last Answer : (D) None of these

In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Description : In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Last Answer : (C) Same

Kopp's rule is used to calculate the heat capacity of (A) Solids (B) Liquids (C) Gases (D) All (A), (B) & (C)

Description : Kopp's rule is used to calculate the heat capacity of (A) Solids (B) Liquids (C) Gases (D) All (A), (B) & (C)

Last Answer : (A) Solids

In industrial operations fluids with temperature less than __________ are set as the limit for waste heat recovery because of the risk of condensation of corrosive liquids a. 80C b. 100C c. 120C d. 200C

Description : In industrial operations fluids with temperature less than __________ are set as the limit for waste heat recovery because of the risk of condensation of corrosive liquids a. 80C b. 100C c. 120C d. 200C

Last Answer : 100C

Globulins contained in human blood plasma are primarily involved in (a) osmotic balance of body fluids (b) oxygen transport in the blood (c) clotting of blood (d) defence mechanisms of body.

Description : Globulins contained in human blood plasma are primarily involved in (a) osmotic balance of body fluids (b) oxygen transport in the blood (c) clotting of blood (d) defence mechanisms of body.

Last Answer : (d) defence mechanisms of body.

Dengue fever is transmitted primarily bya. contact with body fluids. b. contaminated water and food. c. arthropods. d. None of the above( A-C) is correct.

Description : Dengue fever is transmitted primarily by a. contact with body fluids. b. contaminated water and food. c. arthropods. d. None of the above( A-C) is correct.

Last Answer : d. None of the above( A-C) is correct.

During metamorphonism, changes in the bulk composition of a rock occur primarily as a result of _____? a) Increase in pressure b) Increases in temperature c) Reaction with hydrothermal fluids d) All of these

Description : During metamorphonism, changes in the bulk composition of a rock occur primarily as a result of _____? a) Increase in pressure b) Increases in temperature c) Reaction with hydrothermal fluids d) All of these

Last Answer : Increase in pressure

Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Description : Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Last Answer : d. Friction between dry surfaces

What connections do you have between the reading and your Mixing Solids and Liquids investigation?

Description : What connections do you have between the reading and your Mixing Solids and Liquids investigation?

Last Answer : well reading is more diffrent then sold and liquid

What is the speed of particles in liquids compared to solids ?

Description : What is the speed of particles in liquids compared to solids ?

Last Answer : Liquid particles have a higher velocity than solids.

How did you separate the solids from the liquids?

Description : How did you separate the solids from the liquids?

Last Answer : Solids can often be removed from a liquid by filtering theliquid, or by settling, where solids either settle to the bottom orfloat to the top.

What seismic waves can travel through solids and liquids?

Description : What seismic waves can travel through solids and liquids?

Last Answer : What is the answer ?

What can liquids and gases do that solids can not?

Description : What can liquids and gases do that solids can not?

Last Answer : Need answer

What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Last Answer : B. A solute and a solvent

Speed of sound is greater in solids than in liquids?

Description : Speed of sound is greater in solids than in liquids?

Last Answer : – Because the solids have high elasticity

A fractionating column is a glass apparatus used to (a) Separate magnetic solids from nonmagnetic solids (b) Separate a mixture in water (c) Separate two or more liquids (d) Extract oils from vegetable matter

Description : A fractionating column is a glass apparatus used to (a) Separate magnetic solids from nonmagnetic solids (b) Separate a mixture in water (c) Separate two or more liquids (d) Extract oils from vegetable matter

Last Answer : Ans:(c)

Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are called oils. (c) When hydrolyzed, they produce glycerol and carboxylate salts. (d) Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Description : Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are ... low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Last Answer : Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Which statement is false? (a) Many alkanes are soluble in water. (b) All alkanes have a lower density than water. (c) At room temperature some alkanes are liquids, some solids, some gases. (d) All alkanes burn

Description : Which statement is false? (a) Many alkanes are soluble in water. (b) All alkanes have a lower density than water. (c) At room temperature some alkanes are liquids, some solids, some gases. (d) All alkanes burn

Last Answer : Many alkanes are soluble in water

What is the advantage of flash pasteurization? a. It Doesn't Get As Hot b. It Is Faster c. It Is Also Used For Solids, Not Just Liquids d. It Also Sterilizes The Liquid

Description : What is the advantage of flash pasteurization? a. It Doesn't Get As Hot b. It Is Faster c. It Is Also Used For Solids, Not Just Liquids d. It Also Sterilizes The Liquid

Last Answer : b. It Is Faster

Why do gases expand faster than liquids and solids?

Description : Why do gases expand faster than liquids and solids?

Last Answer : Because the particles of gases are widely disturbed i.e. their particles are far apart from each other and they free to move. Other

Coulomb friction is the friction between (A) Bodies having relative motion (B) Two dry surfaces (C) Two lubricated surfaces (D) Solids and liquids

Description : Coulomb friction is the friction between  (A) Bodies having relative motion  (B) Two dry surfaces  (C) Two lubricated surfaces  (D) Solids and liquids 

Last Answer : (A) Bodies having relative motion 

Halitosis and a sour taste in the mouth are signs and symptoms associated most directly with a) esophageal diverticula. Because the diverticula may retain decomposed food, halitosis and a sour taste in the mouth are frequent complaints. b) achalasia. Achalasia presents as difficulty in swallowing both liquids and solids. c) gastroesophageal reflux. Gastroesophageal reflux presents as burning in the esophagus, indigestion, and difficulty in or pain upon swallowing. d) hiatal hernia. Hiatal hernia presents as heartburn, regurgitation, and dysphagia in many patients while at least 50% are asymptomatic.

Description : Halitosis and a sour taste in the mouth are signs and symptoms associated most directly with a) esophageal diverticula. Because the diverticula may retain decomposed food, halitosis and a sour ... as heartburn, regurgitation, and dysphagia in many patients while at least 50% are asymptomatic.

Last Answer : a) esophageal diverticula. Because the diverticula may retain decomposed food, halitosis and a sour taste in the mouth are frequent complaints.

Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity

Description : Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity

Last Answer : Answer: Option A

Which of the following have the highest thermal conductivities?  a. liquids  b. gases  c. metals  d. solids other than metals

Description : Which of the following have the highest thermal conductivities?  a. liquids  b. gases  c. metals  d. solids other than metals

Last Answer : metals

Solids and liquids have  (a) one value of specific heat (ft) two values of specific heat  (c) three values of specific heat  (d) no value of specific heat  (e) one value under some conditions and two values under other conditions.

Description : Solids and liquids have  (a) one value of specific heat (ft) two values of specific heat  (c) three values of specific heat  (d) no value of specific heat  (e) one value under some conditions and two values under other conditions.

Last Answer : Answer : a

Forces in ionic crystalline solids are primarily which of the following? w)covalent x)electrostatic y)Van der Waals z)magnetic

Description : Forces in ionic crystalline solids are primarily which of the following? w)covalent x)electrostatic y)Van der Waals z)magnetic

Last Answer : ANSWER: X -- ELECTROSTATIC

Choose the wrong statement (A) Viscosity of a fluid is that property which determines the amount of its resistance to a shearing force (B) Viscosity is due primarily to interaction between fluid molecules (C) Viscosity of liquids decreases with increase in temperature (D) Viscosity of liquid

Description : Choose the wrong statement (A) Viscosity of a fluid is that property which determines the amount of its resistance to a shearing force (B) Viscosity is due primarily to interaction between fluid molecules (C) Viscosity of liquids decreases with increase in temperature (D) Viscosity of liquid

Last Answer : Answer: Option D

Sedimentation on commercial scale occurs in (A) Classifiers (B) Thickeners (C) Rotary drum filters (D) Cyclones

Description : Sedimentation on commercial scale occurs in (A) Classifiers (B) Thickeners (C) Rotary drum filters (D) Cyclones

Last Answer : (C) Rotary drum filters

Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Description : Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Last Answer : (D) Sorting classifier

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Description : Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Last Answer : (B) 2 to 5°

Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Description : Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Last Answer : (B) Have very wide boiling points

__________ diffusion is used for separating the isotopes of methane. (A) Thermal (B) Pressure (C) Concentration (D) Force

Description : __________ diffusion is used for separating the isotopes of methane. (A) Thermal (B) Pressure (C) Concentration (D) Force

Last Answer : (A) Thermal

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent for extractive distillation? (A) Cost (B) Availability(C) Toxicity(D) Selectivity

Description : Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent ... ? (A) Cost (B) Availability (C) Toxicity (D) Selectivity

Last Answer : (D) Selectivity

A refractory wall separating the stock and the source of heat is provided in a (A) Updraft kiln (B) Muffle furnace (C) Continuous furnace (D) None of these

Description : A refractory wall separating the stock and the source of heat is provided in a (A) Updraft kiln (B) Muffle furnace (C) Continuous furnace (D) None of these

Last Answer : (B) Muffle furnace

Dryness fraction of wet steam is defined as the ratio of mass of vapour in the mixture to the mass of mixture __________ calorimeter is not used for measuring the dryness fraction of steam. (A) Bomb (B) Separating (C) Bucket (D) Throttling

Description : Dryness fraction of wet steam is defined as the ratio of mass of vapour in the mixture to the mass of mixture __________ calorimeter is not used for measuring the dryness fraction of steam. (A) Bomb (B) Separating (C) Bucket (D) Throttling

Last Answer : A) Bomb

__________ calorimeter is normally used for measuring the dryness fraction of steam, when it is very low. (A) Bucket (B) Throttling (C) Separating (D) A combination of separating & throttling

Description : __________ calorimeter is normally used for measuring the dryness fraction of steam, when it is very low. (A) Bucket (B) Throttling (C) Separating (D) A combination of separating & throttling

Last Answer : (D) A combination of separating & throttling

In which season is the frequency of tropical cyclones in the Bay of Bengal maximum? -General Knowledge

Description : In which season is the frequency of tropical cyclones in the Bay of Bengal maximum? -General Knowledge

Last Answer : The answer is 'After summer'

Why do the tropical cyclones not occur close to the equator? -Do You Know?

Description : Why do the tropical cyclones not occur close to the equator? -Do You Know?

Last Answer : This is due to The Weak Coriolis Force. The Coriolis force is quite different at the equator than it is at the Poles. In fact, the magnitude is zero at the equator. Because there is no turning of ... get deflected due to this force in both the hemisphere... So, on equators cyclones are not formed.

What are tropical cyclones of the Bay of Bengal usually called? -Do You Know?

Description : What are tropical cyclones of the Bay of Bengal usually called? -Do You Know?

Last Answer : Hurricanes The tropical cyclones of the Bay of Bengal are usually called Hurricanes. The Bay of Bengal is one of the major centres of the world for breeding tropical storms.

In which season is the frequency of tropical cyclones in the Bay of Bengal maximum? -Do You Know?

Description : In which season is the frequency of tropical cyclones in the Bay of Bengal maximum? -Do You Know?

Last Answer : After summer season the frequency of tropical cyclones in the Bay of Bengal maximum because at that time their is high pressure area.

In which season is the frequency of tropical cyclones in the Bay of Bengal maximum? -General Knowledge

Description : In which season is the frequency of tropical cyclones in the Bay of Bengal maximum? -General Knowledge

Last Answer : After summer season the frequency of tropical cyclones in the Bay of Bengal maximum because at that time their is high pressure area.