In Lurgi coal gasifier, (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Larger quantity of coal can be processed

In Lurgi coal gasifier,
(A) Coking coals cannot be used
(B) Low carbon conversion efficiency is achieved
(C) Entrainment of solids is higher
(D) Larger quantity of coal can be processed
by

1 Answer

Answer :

(D) Larger quantity of coal can be processed
by

Related questions

In the Lurgi coal gasifier (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Large quantity of coal can be processed

Description : In the Lurgi coal gasifier (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Large quantity of coal can be processed

Last Answer : (D) Large quantity of coal can be processed

A coal gasifier operating at 20 atm. (e.g. Lurgi gasifier) as compared to one operating at atmospheric pressure (e.g. Kopper-Totzek or Winkler gasifier) will produce a gas having (A) Higher methane content and thus higher calorific value (B) Higher carbon monoxide content(C) Lower carbon dioxide content(D) None of these

Description : A coal gasifier operating at 20 atm. (e.g. Lurgi gasifier) as compared to one operating at atmospheric pressure (e.g. Kopper-Totzek or Winkler gasifier) will produce a gas having (A) Higher ... calorific value (B) Higher carbon monoxide content (C) Lower carbon dioxide content (D) None of these

Last Answer : (A) Higher methane content and thus higher calorific value

Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas because of the color of the flame, when it is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Description : Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas ... is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Last Answer : (B) Acetylene gas cannot be used for illumination purpose

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor(C) Cannot use coking coal(D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Producer gas containing least amount of tar is produced by the (A) Partial combustion of coal (B) Partial combustion of large size (< 50 mm) coke (C) High pressure gasification of coal (e.g. in Lurgi gasifier) (D) Atmospheric pressure gasification of coal (e.g., in Kopper-Totzek gasifier)

Description : Producer gas containing least amount of tar is produced by the (A) Partial combustion of coal (B) Partial combustion of large size (< 50 mm) coke (C) High pressure gasification of coal (e.g. in Lurgi gasifier) (D) Atmospheric pressure gasification of coal (e.g., in Kopper-Totzek gasifier)

Last Answer : (B) Partial combustion of large size (< 50 mm) coke

Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

Which of the following gasifiers can be attached to coal based fertiliser plants? (A) Lurgi (high pressure) gasifier (B) Kopper-Totzek gasifier (C) Gasifier working at 20 atm (D) Gasifier working at 40 atm

Description : Which of the following gasifiers can be attached to coal based fertiliser plants? (A) Lurgi (high pressure) gasifier (B) Kopper-Totzek gasifier (C) Gasifier working at 20 atm (D) Gasifier working at 40 atm

Last Answer : (B) Kopper-Totzek gasifier

. Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : . Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

Lurgi gasifier (high pressure gasifier) as compared to Kopper Totzek gasifier (atmospheric pressure gasifier) produces (A) Higher amount of methane (B) Lower amount of hydrogen (C) Both (A) and (B) (D) Higher amount of both methane and hydrogen

Description : Lurgi gasifier (high pressure gasifier) as compared to Kopper Totzek gasifier (atmospheric pressure gasifier) produces (A) Higher amount of methane (B) Lower amount of hydrogen (C) Both (A) and (B) (D) Higher amount of both methane and hydrogen

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

Higher efficiency in the combustion of solid fuel cannot be achieved by (A) Proper fuel preparation (B) Keeping the flue gas exhaust temperature very high (C) Adopting efficient-fuel firing technique & equipment (D) Supplying correct quantity of combustion air

Description : Higher efficiency in the combustion of solid fuel cannot be achieved by (A) Proper fuel preparation (B) Keeping the flue gas exhaust temperature very high (C) Adopting efficient-fuel firing technique & equipment (D) Supplying correct quantity of combustion air

Last Answer : (B) Keeping the flue gas exhaust temperature very high

Ratio of primary air to secondary air increases with increase in the rank of coal, because the (A) High rank coals have higher amount of volatile matter (B) Ratio of fixed carbon to volatile matter increases (C) Oxygen content progressively decreases (D) Calorific value of the coal increases

Description : Ratio of primary air to secondary air increases with increase in the rank of coal, because the (A) High rank coals have higher amount of volatile matter (B) Ratio of fixed carbon to volatile matter increases (C) Oxygen content progressively decreases (D) Calorific value of the coal increases

Last Answer : (B) Ratio of fixed carbon to volatile matter increases

High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Description : High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Last Answer : (A) Are soft & friable (poor strength and size stability)

Coking coals are invariably (A) Lignites (B) Bituminous coals (C) Semi-anthracites (D) Anthracites

Description : Coking coals are invariably (A) Lignites (B) Bituminous coals (C) Semi-anthracites (D) Anthracites

Last Answer : (B) Bituminous coals

Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Description : Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Last Answer : (B) Cokes of high reactivity are obtained from strongly coking coals

Very __________ coals are completely devoid of cokability i.e., it is non-coking. (A) Young (B) Mature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Very __________ coals are completely devoid of cokability i.e., it is non-coking. (A) Young (B) Mature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (C) Both 'a' & 'b'

Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Description : Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Last Answer : (B) Takes 2-3 days for coking of coal but requires no external fuel for heating

In continuous fluidisation (A) Solids are completely entrained (B) The pressure drop is less than that for batch fluidisation (C) There is no entrainment of solids (D) Velocity of the fluid is very small

Description : In continuous fluidisation (A) Solids are completely entrained (B) The pressure drop is less than that for batch fluidisation (C) There is no entrainment of solids (D) Velocity of the fluid is very small

Last Answer : (A) Solids are completely entrained

To get high tray efficiency (A) Interfacial surface between liquid and gas phase should be large (B) Time of contact between the two phases should be less (C) Gas velocity should be very low (D) Liquid entrainment should be severe

Description : To get high tray efficiency (A) Interfacial surface between liquid and gas phase should be large (B) Time of contact between the two phases should be less (C) Gas velocity should be very low (D) Liquid entrainment should be severe

Last Answer : (A) Interfacial surface between liquid and gas phase should be large

Higher fuel combustion efficiency cannot be achieved by (A) Preheating of fuel gases & combustion air (B) Reducing sulphur content in the fuel (C) Adopting proper fuel firing technique & fuel preparation (D) Supplying correct amount of combustion air

Description : Higher fuel combustion efficiency cannot be achieved by (A) Preheating of fuel gases & combustion air (B) Reducing sulphur content in the fuel (C) Adopting proper fuel firing technique & fuel preparation (D) Supplying correct amount of combustion air

Last Answer : (B) Reducing sulphur content in the fuel

Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Description : Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Last Answer : (A) It cannot burn low grade coal

The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Description : The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Last Answer : Ans: D

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Fussain (A) Is friable, charcoal like substance(B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking coal, controls its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)

Description : Fussain (A) Is friable, charcoal like substance (B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking ... its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes(C) Blending with highly coking coal to check its swelling which helps insaving coke even walls from damage and to produce high strength coke(D) All (A), (B) and (C)

Description : Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes (C) Blending with highly coking coal to check its swelling which helps in saving coke even walls from damage and to produce high strength coke (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

High temperature carbonisation of coal produces (A) Inferior coke compared to low temperature carbonisation(B) Less of gases compared to liquid products(C) Larger quantity of tar compared to low temperature carbonisation(D) None of these

Description : High temperature carbonisation of coal produces (A) Inferior coke compared to low temperature carbonisation (B) Less of gases compared to liquid products (C) Larger quantity of tar compared to low temperature carbonisation (D) None of these

Last Answer : (D) None of these

Plate efficiency (A) Is a function of the mass transfer between liquid and vapour (B) Increases due to foaming (C) Increases due to liquid entrainment (D) Increases due to weeping and dumping of liquid

Description : Plate efficiency (A) Is a function of the mass transfer between liquid and vapour (B) Increases due to foaming (C) Increases due to liquid entrainment (D) Increases due to weeping and dumping of liquid

Last Answer : (A) Is a function of the mass transfer between liquid and vapour

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Plate efficiency in a distillation column is reduced due to the __________ of liquid. (A) Entrainment (B) Foaming (C) Weeping & dumping (D) All (A), (B) & (C)

Description : Plate efficiency in a distillation column is reduced due to the __________ of liquid. (A) Entrainment (B) Foaming (C) Weeping & dumping (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

_________ process is meant for direct hydrogenation of coal to produce liquid fuel. (A) Fischer-Tropsch (B) Bergius (C) Lurgi (D) None of these

Description : _________ process is meant for direct hydrogenation of coal to produce liquid fuel. (A) Fischer-Tropsch (B) Bergius (C) Lurgi (D) None of these

Last Answer : (B) Bergius

High pressure coal gasification is employed in __________ process. (A) Lurgi (B) Kopper-Totzek (C) Winkler (D) None of these

Description : High pressure coal gasification is employed in __________ process. (A) Lurgi (B) Kopper-Totzek (C) Winkler (D) None of these

Last Answer : (A) Lurgi

Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier. (A) Entrained (B) Moving (C) Fixed (D) Fluidised

Description : Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier. (A) Entrained (B) Moving (C) Fixed (D) Fluidised

Last Answer : (A) Entrained

Which of the following coal gasification processes will produce gas having maximum methane content? (A) Winkler process (B) Lurgi process (C) Kopper-Totzek process (D) All can produce same methane content

Description : Which of the following coal gasification processes will produce gas having maximum methane content? (A) Winkler process (B) Lurgi process (C) Kopper-Totzek process (D) All can produce same methane content

Last Answer : (B) Lurgi process

Gas yield in the Kopper-Totzek coal gasifier is about __________ Nm3 /ton coal (ash = 35%). (A) 150 (B) 1500 (C) 3500 (D) 5000

Description : Gas yield in the Kopper-Totzek coal gasifier is about __________ Nm3 /ton coal (ash = 35%). (A) 150 (B) 1500 (C) 3500 (D) 5000

Last Answer : (C) 3500

Which of the following is a single stage, fixed bed high pressure coal gasification process? (A) Winkler process (B) Kopper-Totzek process (C) Lurgi Process (D) None of these

Description : Which of the following is a single stage, fixed bed high pressure coal gasification process? (A) Winkler process (B) Kopper-Totzek process (C) Lurgi Process (D) None of these

Last Answer : (C) Lurgi Process

Tabular bowl centrifuges as compared to disk bowl centrifuges (A) Operate at higher speed (B) Employ bowl of larger diameter (C) Can’t be operated under pressure/vacuum (D) Can’t be used for separation of fine suspended solids from a liquid

Description : Tabular bowl centrifuges as compared to disk bowl centrifuges (A) Operate at higher speed (B) Employ bowl of larger diameter (C) Can’t be operated under pressure/vacuum (D) Can’t be used for separation of fine suspended solids from a liquid

Last Answer : (A) Operate at higher speed

Cannel coal and boghead coal are the examples of (A) Humic coals (B) Liptobiolites (C) Sapropelic coals (D) None of these

Description : Cannel coal and boghead coal are the examples of (A) Humic coals (B) Liptobiolites (C) Sapropelic coals (D) None of these

Last Answer : (C) Sapropelic coals

Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of(A) Thermal cracking(B) Gum formation(C) Coking(D) Discoloration

Description : Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of (A) Thermal cracking (B) Gum formation (C) Coking (D) Discoloration

Last Answer : (C) Coking

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

Consider the following problems being faced by the Indian Coal Industry : 1. Poor quality of coal and bottlenecks in the coal movement 2. Low utilisation capacity of washeries 3. Growing dependence on the import of coking coal 4. Administered prices Which of the above are correct? [BPSC 2011] (a) II, III and IV (b) I, II, III and IV (c) I, III and IV (d) I, II and III

Description : Consider the following problems being faced by the Indian Coal Industry : 1. Poor quality of coal and bottlenecks in the coal movement 2. Low utilisation capacity of washeries 3. Growing dependence on the import of coking coal 4. ... (b) I, II, III and IV (c) I, III and IV (d) I, II and III

Last Answer : Ans: (b)

Which of the following statement (s) regarding India's coal reserves is/are true ? 1. Over 90 percent of total reserves are located in the valleys of Son, Damodar, Mahanadi and Godavari 2. Indian coal reserves are characterised by low ash content and high calorific value 3. India has limited prime coking reserves (a) I only (b) I and III (c) II and III (d) I, II and III

Description : Which of the following statement (s) regarding India's coal reserves is/are true ? 1. Over 90 percent of total reserves are located in the valleys of Son, Damodar, Mahanadi and Godavari 2. Indian coal reserves are characterised ... reserves (a) I only (b) I and III (c) II and III (d) I, II and III

Last Answer : Ans: (c)

A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger(C) Is not subjected to washing(D) Has low quantity of mineral matter

Description : A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger (C) Is not subjected to washing (D) Has low quantity of mineral matter

Last Answer : (B) Is harder and stronger

Proximity analysis of coal provides data for a first, general assessment of a coal’s quality and type. What elements it reports ?

Description : Proximity analysis of coal provides data for a first, general assessment of a coal’s quality and type. What elements it reports ?

Last Answer : Moisture, volatile matter, ash and fixed carbon.

A good coking coal should have high __________ content. (A) Ash (B) Sulphur & phosphorus (C) Moisture (D) None of these

Description : A good coking coal should have high __________ content. (A) Ash (B) Sulphur & phosphorus (C) Moisture (D) None of these

Last Answer : (D) None of these

Anthracite coal (A) Contains more volatile matter than bituminous coal (B) Ignites more easily than bituminous coal (C) Is essentially a coking coal (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Description : Anthracite coal (A) Contains more volatile matter than bituminous coal (B) Ignites more easily than bituminous coal (C) Is essentially a coking coal (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Last Answer : (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Description : Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Last Answer : (B) Pulverised coking coal

Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Lignite is (A) A high rank coal (B) A coking coal (C) Can be used for gasification and steam generation (D) A black banded coal which burns with a non-smoky yellowish flame

Description : Lignite is (A) A high rank coal (B) A coking coal (C) Can be used for gasification and steam generation (D) A black banded coal which burns with a non-smoky yellowish flame

Last Answer : (C) Can be used for gasification and steam generation