Oxygen is produced by fractionation of air using __________ process. (A) Linde's (B) Claude's (C) Either (A) or (B) (D) None of these

Oxygen is produced by fractionation of air using __________ process.
(A) Linde's
(B) Claude's
(C) Either (A) or (B)
(D) None of these
by

1 Answer

Answer :

(C) Either (A) or (B)
by

Related questions

Explain manufacturing of oxygen and Nitrogen by Claude’s process.

Description : Explain manufacturing of oxygen and Nitrogen by Claude’s process.  

Last Answer : CLAUDES PROCESS: Principle: when a cooled compressed gas is allowed to some external work e.g. pushing the piston of gas engine, it falls in temperature. Flow diagram:   Process description: ... to the exit provided. Liq O2 evaporate as it cools the air and escape to the exit indicated 

Claude's liquefaction process employs the cooling of gases by (A) Expansion in an engine (B) Following a constant pressure cycle (C) Throttling (D) None of these

Description : Claude's liquefaction process employs the cooling of gases by (A) Expansion in an engine (B) Following a constant pressure cycle (C) Throttling (D) None of these

Last Answer : A) Expansion in an engine

Most commonly used crude heater before the fractionation tower in a refinery is the __________ heater. (A) Electric immersion (B) Pipestill (C) Steam coil (D) None of these

Description : Most commonly used crude heater before the fractionation tower in a refinery is the __________ heater. (A) Electric immersion (B) Pipestill (C) Steam coil (D) None of these

Last Answer : (B) Pipestill

Fertiliser plants get their N2 requirements (A) By fractionation of liquefied air (B) By dissociating oxides of nitrogen (C) From coal gas (coke oven gas) (D) From producer gas

Description : Fertiliser plants get their N2 requirements (A) By fractionation of liquefied air (B) By dissociating oxides of nitrogen (C) From coal gas (coke oven gas) (D) From producer gas

Last Answer : (A) By fractionation of liquefied air

The process by which the amount of DNA, RNA and protein can be known at a time is: (a) Cell fractionation (b) Autoradiography (c) Phase-contrast microscopy (d) Tissue culture

Description : The process by which the amount of DNA, RNA and protein can be known at a time is: (a) Cell fractionation (b) Autoradiography (c) Phase-contrast microscopy (d) Tissue culture

Last Answer : Ans. ((b))

Ignition temperature of a fuel in air is __________ that in pure oxygen. (A) More than(B) Less than(C) Equal to(D) Either more or less; depends on the type of fuel

Description : Ignition temperature of a fuel in air is __________ that in pure oxygen. (A) More than (B) Less than (C) Equal to (D) Either more or less; depends on the type of fuel

Last Answer : (A) More than

A student coming out cell fractionation of a tissue and forgot to label his tubes. The contents of one tube when studied showed organelles bounded by

Description : A student coming out cell fractionation of a tissue and forgot to label his tubes. The contents of one tube when studied showed organelles bounded by

Last Answer : A student coming out cell fractionation of a tissue and forgot to label his tubes. The contents of ... . SER B. Chloroplast C. Lysosome D. Perosisome

How may cells be disrupted in order to obtain subcellular organelles by centrifugal fractionation?

Description : How may cells be disrupted in order to obtain subcellular organelles by centrifugal fractionation?

Last Answer : There are several ways of disrupting cells: 1. Osmotic lysis. The plasma membranes of cells are water-permeable but are impermeable to large molecules and some ions. Thus if cells are placed ... cause microcavitation in the sample, and this disrupts the cell membranes, usually in a few seconds.

The rupture and fractionation do not usually occur in the water column in vessel/tracheids during the ascent of sap because of (a) weak gravitational pull (b) transpiration pull (c) lignified thick walls (d) cohesion and adhesion

Description : The rupture and fractionation do not usually occur in the water column in vessel/tracheids during the ascent of sap because of (a) weak gravitational pull (b) transpiration pull (c) lignified thick walls (d) cohesion and adhesion

Last Answer : (d) cohesion and adhesion.

Isolation of cellular components to determine their chemical composition is called (A) Cell differentiation (B) Chromatography (C) Cell fractionation (D) All of these

Description : Isolation of cellular components to determine their chemical composition is called (A) Cell differentiation (B) Chromatography (C) Cell fractionation (D) All of these

Last Answer : (C) Cell fractionation

Theoretical flame temperature of a fuel is that temperature which is attained, when the fuel is completely burnt 'using theoretical amount of air in (A) Air (B) Oxygen (C) Either (A) or (B) (D) Either (A) or (B) without gain or loss of heat

Description : Theoretical flame temperature of a fuel is that temperature which is attained, when the fuel is completely burnt 'using theoretical amount of air in (A) Air (B) Oxygen (C) Either (A) or (B) (D) Either (A) or (B) without gain or loss of heat

Last Answer : (D) Either (A) or (B) without gain or loss of heat

The maximum adiabatic flame temperature in air as compared to that in pure oxygen is (A) Much lower (B) Much higher (C) Same (D) Either lower or higher, depends on the type of fuel

Description : The maximum adiabatic flame temperature in air as compared to that in pure oxygen is (A) Much lower (B) Much higher (C) Same (D) Either lower or higher, depends on the type of fuel

Last Answer : (A) Much lower

All gases except __________ shows a cooling effect during throttling process at atmospheric temperature and pressure. (A) Oxygen (B) Nitrogen (C) Air (D) Hydrogen

Description : All gases except __________ shows a cooling effect during throttling process at atmospheric temperature and pressure. (A) Oxygen (B) Nitrogen (C) Air (D) Hydrogen

Last Answer : (D) Hydrogen

'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost. (A) 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Last Answer : (B) 10 to 20

The noise produced by a ______ cooled machine is less as the rotor moves in a medium of smaller density. (a) air (b) hydrogen (c) either (a) or (b) (d) none of the above

Description : The noise produced by a ______ cooled machine is less as the rotor moves in a medium of smaller density. (a) air (b) hydrogen (c) either (a) or (b) (d) none of the above

Last Answer : (b) hydrogen

Preheating of __________ the flame temperature. (A) The gaseous fuel before combustion decreases (B) Combustion air decreases (C) Either the fuel or the air or both, increases (D) Either the fuel or the air does not affect

Description : Preheating of __________ the flame temperature. (A) The gaseous fuel before combustion decreases (B) Combustion air decreases (C) Either the fuel or the air or both, increases (D) Either the fuel or the air does not affect

Last Answer : (C) Either the fuel or the air or both, increases

Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Description : Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Last Answer : (B) Uses either emulsion or suspension polymerisation methods

Power required in case of forced draught as compared to induced draught (for the same draught produced) is (A) Same (B) Less (C) More (D) Either more or less; depends on the flue gas density

Description : Power required in case of forced draught as compared to induced draught (for the same draught produced) is (A) Same (B) Less (C) More (D) Either more or less; depends on the flue gas density

Last Answer : (B) Less

Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are normally carried out at about __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Description : Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are ... __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Last Answer : (B) 900-1000

Oxygen content in a flue gas was found to be 4%. It implies that excess air used for combustion was around __________ percent. (A) 4 (B) 96 (C) 20 (D) 40

Description : Oxygen content in a flue gas was found to be 4%. It implies that excess air used for combustion was around __________ percent. (A) 4 (B) 96 (C) 20 (D) 40

Last Answer : (C) 20

The maximum adiabatic flame temperature in air is __________ the maximum flame temperature in pure oxygen. (A) Lower than (B) Higher than(C) Same as(D) Not related to

Description : The maximum adiabatic flame temperature in air is __________ the maximum flame temperature in pure oxygen. (A) Lower than (B) Higher than (C) Same as (D) Not related to

Last Answer : (A) Lower than

Presence of nitrogen in high concentration in contaminated air reduces partial pressure of oxygen in lungs, thereby causing asphyxia (suffocation) leading to death from oxygen deficiency. Concentration of N2 in contaminated air at which it acts as a natural asphyxiate is ≥ __________ percent. (A) 84 (B) 88 (C) 80 (D) 92

Description : Presence of nitrogen in high concentration in contaminated air reduces partial pressure of oxygen in lungs, thereby causing asphyxia (suffocation) leading to death from oxygen deficiency. Concentration of N2 in contaminated air at ... asphyxiate is ≥ __________ percent. (A) 84 (B) 88 (C) 80 (D) 92

Last Answer : (A) 84

Oxygen is separated by distillation from air after its liquefaction. The boiling point of oxygen is about __________ °C. (A) -83 (B) -183 (C) -196 (D) -218

Description : Oxygen is separated by distillation from air after its liquefaction. The boiling point of oxygen is about __________ °C. (A) -83 (B) -183 (C) -196 (D) -218

Last Answer : (B) -183

Electrochemical corrosion can occur, only if __________ is present in contact with metal. (A) Air (B) Oxygen (C) Liquid medium (D) Gaseous medium

Description : Electrochemical corrosion can occur, only if __________ is present in contact with metal. (A) Air (B) Oxygen (C) Liquid medium (D) Gaseous medium

Last Answer : (C) Liquid medium

Sodium bicarbonate is produced during soda ash manufacture using a __________ tower. (A) Plate (B) Baffle (C) Packed (D) None of these

Description : Sodium bicarbonate is produced during soda ash manufacture using a __________ tower. (A) Plate (B) Baffle (C) Packed (D) None of these

Last Answer : (B) Baffle

__________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether

Description : __________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether

Last Answer : (B) Ethyl alcohol

__________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Description : __________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Last Answer : (B) Phenol formaldehyde

Petroleum coke is commercially produced by the __________ process. (A) Hydrocracking (B) Visbreaking (C) Fluid catalytic cracking (D) Delayed coking

Description : Petroleum coke is commercially produced by the __________ process. (A) Hydrocracking (B) Visbreaking (C) Fluid catalytic cracking (D) Delayed coking

Last Answer : (D) Delayed coking

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

Fuel economy in furnaces can be achieved by (A) Using oxygen enriched combustion air (B) Preheating the combustion air (C) Reducing the heat loss through furnace openings & doors (D) All (A), (B) and (C

Description : Fuel economy in furnaces can be achieved by (A) Using oxygen enriched combustion air (B) Preheating the combustion air (C) Reducing the heat loss through furnace openings & doors (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Stack heat losses can be minimised by (A) Controlling the excess air (B) Oxygen enrichment of combustion air (C) Using low c.v. fuels (D) Maintaining proper draft in the furnace

Description : Stack heat losses can be minimised by (A) Controlling the excess air (B) Oxygen enrichment of combustion air (C) Using low c.v. fuels (D) Maintaining proper draft in the furnace

Last Answer : (A) Controlling the excess air

Short/intense flame is produced during combustion of gaseous fuel by using (A) High amount/current of combustion air(B) Low amount/current of combustion air(C) Preheated secondary air(D) Very little excess air

Description : Short/intense flame is produced during combustion of gaseous fuel by using (A) High amount/current of combustion air (B) Low amount/current of combustion air (C) Preheated secondary air (D) Very little excess air

Last Answer : (A) High amount/current of combustion air

5. In "Imperial Smelting Process" for extraction of zinc, zinc vapour thus produced is quenched in the external condenser by the use of the following: (A) Jet of water at high pressure (B) Blast of air (C) Mixture of water and air (D) Rain of molten lead

Description : 5. In "Imperial Smelting Process" for extraction of zinc, zinc vapour thus produced is quenched in the external condenser by the use of the following: (A) Jet of water at high pressure (B) Blast of air (C) Mixture of water and air (D) Rain of molten lead

Last Answer : Option D

The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Description : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Last Answer : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid- ... . `H_(2)O` D. `CO_(2)`

The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Description : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Last Answer : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their ... P_(2)O_(5)` D. `FeO, CuO`

The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Description : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Last Answer : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their ... `Mn_(3)O_(4),N_(2)O_(5)`

The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Description : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Last Answer : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their ... C. CO,NO D. `Na_(2),CaO`

The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Description : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Last Answer : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid- ... . `N_(2)O, C_(3)O_(2)`

MN and PS are two equal chords of a circle drawn on either side of centre O of the circle . Both the chords are produced to meet at point A. If the ra

Description : MN and PS are two equal chords of a circle drawn on either side of centre O of the circle . Both the chords are produced to meet at point A. If the ra

Last Answer : MN and PS are two equal chords of a circle drawn on either side of centre O of the circle . Both the chords ... 12 `cm and OA `=17` cm , then find NA.

Air-tech management learns that last month's production run of heaters is defective and announces a recall of the specific models produced. To handle the large number of products it expects to receive for replacement, Air -tech will probably need to add a __________ to its distribution network. A)distribution centre B)private warehouse C)dispatching shipment system D)public warehouse E)materials handling system

Description : Air-tech management learns that last month's production run of heaters is defective and announces a recall of the specific models produced. To handle the large number of products ... distribution centre B)private warehouse C)dispatching shipment system D)public warehouse E)materials handling system

Last Answer : D)public warehouse

Addition polymerisation takes place either by a free radical mechanism or ionic mechanism depending on the reagents used. Free radical polymerisation is catalyzed by __________, which decompose to give free radicals. (A) Organic peroxides (B) Sulphuric acid (C) Hydrofluoric acid (D) None of these

Description : Addition polymerisation takes place either by a free radical mechanism or ionic mechanism depending on the reagents used. Free radical polymerisation is catalyzed by __________, which decompose to give free radicals. (A) Organic peroxides (B) Sulphuric acid (C) Hydrofluoric acid (D) None of these

Last Answer : (A) Organic peroxides

Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) More than (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Description : Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) ... (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Last Answer : (C) Same as

True vapour pressure of a petroleum fraction __________ Reid vapour pressure. (A) Is less than (B) Is more than (C) Is same as (D) May be either more or less than

Description : True vapour pressure of a petroleum fraction __________ Reid vapour pressure. (A) Is less than (B) Is more than (C) Is same as (D) May be either more or less than

Last Answer : (D) May be either more or less than

The atomic number of an element is equal to the number of __________ present in its atom. (A) Neutrons (B) Electrons (C) Protons (D) Either (B) or (C)

Description : The atomic number of an element is equal to the number of __________ present in its atom. (A) Neutrons (B) Electrons (C) Protons (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)

Critical energy should be __________ the neutron binding energy of the atom in order to initiate a nuclear fission. (A) Equal to (B) Less than (C) More than (D) Either more or less

Description : Critical energy should be __________ the neutron binding energy of the atom in order to initiate a nuclear fission. (A) Equal to (B) Less than (C) More than (D) Either more or less

Last Answer : (C) More than

Specific surface area is the surface area of a unit __________ of materials. (A) Weight (B) Volume (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Specific surface area is the surface area of a unit __________ of materials. (A) Weight (B) Volume (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface. (A) Plane (B) Curved (C) Ribbed (D) Either (A) or (B)

Description : Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface. (A) Plane (B) Curved (C) Ribbed (D) Either (A) or (B)

Last Answer : (C) Ribbed

Acetaldehyde is shipped in __________ drums. (A) Cast iron (B) Steel (C) Aluminium (D) Either (B) & (C)

Description : Acetaldehyde is shipped in __________ drums. (A) Cast iron (B) Steel (C) Aluminium (D) Either (B) & (C)

Last Answer : (D) Either (B) & (C)

Caustic soda is transported in __________ lined containers. (A) Glass (B) Nickel (C) Neoprene (D) Either (B) or (C)

Description : Caustic soda is transported in __________ lined containers. (A) Glass (B) Nickel (C) Neoprene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)