Which of the following tests is not done for transformer oil? (A) Flash point and acid value (B) Aniline point (C) Dielectric strength (D) Copper strip corrosion test

Which of the following tests is not done for transformer oil?
(A) Flash point and acid value
(B) Aniline point
(C) Dielectric strength
(D) Copper strip corrosion test
by

1 Answer

Answer :

(B) Aniline poin
by

Related questions

A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Description : A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (A) Viscosity index

Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Description : Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (C) Aniline point

Define Dielectric Strength for transformer oil. State its value for new transformer oil.

Description : Define Dielectric Strength for transformer oil. State its value for new transformer oil.

Last Answer : Dielectric strength is defined as the maximum voltage that can be applied to across to the Fulid with out electrical breakdown is called Dielectric strength.

63 The dielectric strength of transformer oil is expected to be A. 1kV B. 33kV C. 100kV D. 330 kV

Description : 63 The dielectric strength of transformer oil is expected to be A. 1kV B. 33kV C. 100kV D. 330 kV

Last Answer : B. 33kv

The dielectric strength of transformer oil should be (A) 100 V. (B) 5 KV. (C) 30 KV. (D) 132 KV.

Description : The dielectric strength of transformer oil should be (A) 100 V. (B) 5 KV. (C) 30 KV. (D) 132 KV.

Last Answer : (C) 30 KV.

The dielectric strength of transformer oil is expected to be?

Description : The dielectric strength of transformer oil is expected to be?

Last Answer : The dielectric strength of transformer oil is expected to be 33 kV.

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Description : Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Last Answer : (C) Aromatic

The efficiency of a transformer is mainly dependent on (A) core losses. (B) copper losses. (C) stray losses. (D) dielectric losses.

Description : The efficiency of a transformer is mainly dependent on (A) core losses. (B) copper losses. (C) stray losses. (D) dielectric losses.

Last Answer : Ans: A Core loss has prominent value over other losses

Which of the following statements about copper wire sized by the AWG rating is correct? A. Number 12 AWG wire has a higher current rating than number 10 AWG wire. B. Number 10 AWG wire has a higher dielectric strength than number 12 AWG wire. C. Number 12 AWG wire is larger than Number 10 AWG wire. D. Number 12 AWG wire at 25°C has more resistance per 1000 feet than No. 10 AWG wire at 25°C.

Description : Which of the following statements about copper wire sized by the AWG rating is correct? A. Number 12 AWG wire has a higher current rating than number 10 AWG wire. B. Number 10 AWG wire has a higher ... Number 12 AWG wire at 25°C has more resistance per 1000 feet than No. 10 AWG wire at 25°C.

Last Answer : Answer: D

Which of the following statements concerning copper wire sized by AWG numbers is correct? A. Number 12 AWG wire has a higher current rating than 10 AWG wire. B. Number 12 AWG wire at 25°C has more resistance per 1000 ft than 10 AWG wire at 25°C. C. Number 10 AWG wire has a higher dielectric strength than 12 AWG wire. D. Number 12 AWG wire is larger than number 10 AWG wire.

Description : Which of the following statements concerning copper wire sized by AWG numbers is correct? A. Number 12 AWG wire has a higher current rating than 10 AWG wire. B. Number 12 AWG wire at 25°C has more ... dielectric strength than 12 AWG wire. D. Number 12 AWG wire is larger than number 10 AWG wire.

Last Answer : Answer: B

The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C

Description : The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C

Last Answer : (d) 104°C

High copper amalgam lasts longer than low copper amalgam because of:** A. Increased compressive strength B. Increased corrosion resistance C. High creep D. Increased tensile strength E. Decreased setting expansion

Description : High copper amalgam lasts longer than low copper amalgam because of:**  A. Increased compressive strength  B. Increased corrosion resistance  C. High creep  D. Increased tensile strength  E. Decreased setting expansion 

Last Answer : A. Increased compressive strength 

Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) More than (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Description : Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) ... (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Last Answer : (C) Same as

The total permittivity of a dielectric transformer oil (relative permittivity is 2.2) will be (in order 10 -11 ) a) 1.94 b) 19.4 c) 0.194 d) 194

Description : The total permittivity of a dielectric transformer oil (relative permittivity is 2.2) will be (in order 10 -11 ) a) 1.94 b) 19.4 c) 0.194 d) 194

Last Answer : a) 1.94

State the causes for dielectric failure of highly purified transformer oil.

Description : State the causes for dielectric failure of highly purified transformer oil. 

Last Answer : The causes for dielectric failure of highly purified transformer oil:  1. Voltage rating 2. Humidity in atmosphere 3. Temperature of the oil 4. Due to improper cable joints and connection. 5. Increasing in supply frequency. 6. Due to unbalanced load. 

Notched bar test is used for testing the __________ of a material. (A) Impact strength (B) Endurance limit (C) Machinability (D) Corrosion resistance

Description : Notched bar test is used for testing the __________ of a material. (A) Impact strength (B) Endurance limit (C) Machinability (D) Corrosion resistance

Last Answer : (A) Impact strength

Where Portion sample tests(test piece) should be conducted? (i) At desire by RDSO (ii) At Zonal CMT’s organisation or the Flash Butt Welding plant. * (iii) In RDSO campus (iv) As decided by in charge of the plant

Description : Where Portion sample tests(test piece) should be conducted? (i) At desire by RDSO (ii) At Zonal CMT’s organisation or the Flash Butt Welding plant. * (iii) In RDSO campus (iv) As decided by in charge of the plant

Last Answer : At Zonal CMT’s organisation or the Flash Butt Welding plant.

Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Description : Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Last Answer : (C) Equal to cetane number plus 3

Aniline point is the temperature at which (A) Equal weight of diesel & the aniline are completely miscible (B) Equal weight of aniline & the test sample are completely miscible (C) Equal volume of aniline & the test sample are completely miscible (D) Aniline vaporises

Description : Aniline point is the temperature at which (A) Equal weight of diesel & the aniline are completely miscible (B) Equal weight of aniline & the test sample are completely miscible (C) Equal volume of aniline & the test sample are completely miscible (D) Aniline vaporises

Last Answer : (C) Equal volume of aniline & the test sample are completely miscible

Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Description : Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Last Answer : (C) Higher flash point and fire point

When using a megohmmeter to test the dielectric strength of wire insulation, a continuous series of slight downscale kicks by the pointer is result of ____________. A. good insulation B. the leakage of current along the surface of dirty insulation C. the capacitance of the windings D. the dielectric-absorption effect of the insulation

Description : When using a megohmmeter to test the dielectric strength of wire insulation, a continuous series of slight downscale kicks by the pointer is result of ____________. A. good insulation B. the ... dirty insulation C. the capacitance of the windings D. the dielectric-absorption effect of the insulation

Last Answer : Answer: B

When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of current along the surface of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Description : When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of ... of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Last Answer : Answer: C

Dielectric strength of a material is (A) Its energy storage capacity (B) A magnetic property (C) Its capacity to resist the flow of current(D) Its capacity to withstand high voltage

Description : Dielectric strength of a material is (A) Its energy storage capacity (B) A magnetic property (C) Its capacity to resist the flow of current (D) Its capacity to withstand high voltage

Last Answer : (D) Its capacity to withstand high voltage

Which of the following tests measures the toughness of road aggregates? (A) Crushing strength test (B) Abrasion test (C) Impact test (D) Shape test

Description : Which of the following tests measures the toughness of road aggregates? (A) Crushing strength test (B) Abrasion test (C) Impact test (D) Shape test

Last Answer : Answer: Option C

What is good dielectric break down value for insulating oil?

Description : What is good dielectric break down value for insulating oil?

Last Answer : 60 kV.

Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points

Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)

Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability to be cast, rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Last Answer : (A) High strength to weight ratio

Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Description : Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Last Answer : (C) Machinability

Presence of cobalt in steel improves its (A) Cutting ability (B) Corrosion resistance (C) Tensile strength

Description : Presence of cobalt in steel improves its (A) Cutting ability (B) Corrosion resistance (C) Tensile strength

Last Answer : (A) Cutting ability

Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Description : Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Last Answer : (C) Corrosion resistance

Moist atmospheric air at high temperature (e.g., in summer) having high concentration of sulphur dioxide causes(A) Fading of dyes on textiles(B) Corrosion, tarnishing & soiling of metals(C) Reduced strength of textiles(D) All (A), (B) and (C)

Description : Moist atmospheric air at high temperature (e.g., in summer) having high concentration of sulphur dioxide causes (A) Fading of dyes on textiles (B) Corrosion, tarnishing & soiling of metals (C) Reduced strength of textiles (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Exposure to SO2 containing chimney gases results in the (A) Reduction in strength of leather & cloth (B) Acceleration of corrosion rates of metals (C) Increased drying & hardening time of paints (D) All (A), (B) and (C)

Description : Exposure to SO2 containing chimney gases results in the (A) Reduction in strength of leather & cloth (B) Acceleration of corrosion rates of metals (C) Increased drying & hardening time of paints (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Lead is added to 60:40 brass primarily to improve (A) Machinability (B) Corrosion resistance (C) Fluidity (D) Strength

Description : Lead is added to 60:40 brass primarily to improve (A) Machinability (B) Corrosion resistance (C) Fluidity (D) Strength

Last Answer : (A) Machinability

Wrought iron does not have (A) Uniform strength in all directions (B) Ability to hold protective coating (C) High ductility & corrosion resistance (D) Easily weldable characteristics

Description : Wrought iron does not have (A) Uniform strength in all directions (B) Ability to hold protective coating (C) High ductility & corrosion resistance (D) Easily weldable characteristics

Last Answer : Option A

Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Description : Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Last Answer : Option C

Which of the following is the most prone to atmospheric corrosion? (A) Silver (B) Iron (C) Tin (D) Copper

Description : Which of the following is the most prone to atmospheric corrosion? (A) Silver (B) Iron (C) Tin (D) Copper

Last Answer : (B) Iron

Hastelloy C is a good material of construction in chemical process industry, since it is (A) Highly corrosion resistant and is readily fabricated (B) Relatively inexpensive although it can be fabricated with some difficulty (C) Corrosion resistant to most alkalis, particularly because of its copper content (D) Light and resists attack by acids

Description : Hastelloy C is a good material of construction in chemical process industry, since it is (A) Highly corrosion resistant and is readily fabricated (B) Relatively inexpensive although it can be ... most alkalis, particularly because of its copper content (D) Light and resists attack by acids

Last Answer : (D) Light and resists attack by acids

The main reason for making the copper calorimeter (used in bomb calorimeter) silvery white and shining/polished is to (A) Minimise its corrosion (B) Avoid radiation heat loss (C) Make it look attractive (D) None of these

Description : The main reason for making the copper calorimeter (used in bomb calorimeter) silvery white and shining/polished is to (A) Minimise its corrosion (B) Avoid radiation heat loss (C) Make it look attractive (D) None of these

Last Answer : (B) Avoid radiation heat loss

Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron

Description : Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron

Last Answer : D) Wrought iron

Alloys having more than 80% copper are generally more (A) Abrasion resistant (B) Corrosion resistant (C) Prone to season cracking (D) Machinable

Description : Alloys having more than 80% copper are generally more (A) Abrasion resistant (B) Corrosion resistant (C) Prone to season cracking (D) Machinable

Last Answer : (B) Corrosion resistant

Viscosity index of a lubricating oil (A) Is the measure of its flash point (B) Is the measure of variation of viscosity with temperature (C) Should be low (D) None of these

Description : Viscosity index of a lubricating oil (A) Is the measure of its flash point (B) Is the measure of variation of viscosity with temperature (C) Should be low (D) None of these

Last Answer : (B) Is the measure of variation of viscosity with temperature

Flash point of an oil gives an idea of the (A) Nature of boiling point diagram of the system (B) Amount of low boiling fraction present (C) Explosion hazards (D) All (A), (B) and (C)

Description : Flash point of an oil gives an idea of the (A) Nature of boiling point diagram of the system (B) Amount of low boiling fraction present (C) Explosion hazards (D) All (A), (B) and (C)

Last Answer : (A) Nature of boiling point diagram of the system

Flash point of an oil is determined by the (A) Pensky Martens apparatus (B) Ramsbottom apparatus (C) Saybolt viscometer (D) Conradson apparatus

Description : Flash point of an oil is determined by the (A) Pensky Martens apparatus (B) Ramsbottom apparatus (C) Saybolt viscometer (D) Conradson apparatus

Last Answer : (A) Pensky Martens apparatus

Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Description : Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Last Answer : (D) Heavy fuel oil

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Diesel index is defined as (A) (°API) × (Aniline Point, °F)/100 (B) (°API) × (Aniline Point, °C)/100 (C) (°API) × (100)/Aniline Point, °F (D) (°API) × (100)/Aniline Point, °C

Description : Diesel index is defined as (A) (°API) × (Aniline Point, °F)/100 (B) (°API) × (Aniline Point, °C)/100 (C) (°API) × (100)/Aniline Point, °F (D) (°API) × (100)/Aniline Point, °C

Last Answer : (A) (°API) × (Aniline Point, °F)/100

Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Description : Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Last Answer : (C) Luminosity number