Aniline point is the temperature at which (A) Equal weight of diesel & the aniline are completely miscible (B) Equal weight of aniline & the test sample are completely miscible (C) Equal volume of aniline & the test sample are completely miscible (D) Aniline vaporises

Aniline point is the temperature at which
(A) Equal weight of diesel & the aniline are completely miscible
(B) Equal weight of aniline & the test sample are completely miscible
(C) Equal volume of aniline & the test sample are completely miscible
(D) Aniline vaporises
by

1 Answer

Answer :

(C) Equal volume of aniline & the test sample are completely miscible
by

Related questions

Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) More than (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Description : Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) ... (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Last Answer : (C) Same as

Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Description : Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Last Answer : (C) Equal to cetane number plus 3

Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Critical solution temperature (or the con-solute temperature) for partially miscible liquids (e.g., phenol-water) is the minimum temperature at which (A) A homogeneous solution (say of phenol water) is formed (B) Mutual solubility of the two liquids shows a decreasing trend (C) Two liquids are completely separated into two layers (D) None of these

Description : Critical solution temperature (or the con-solute temperature) for partially miscible liquids (e.g., phenol-water) is the minimum temperature at which (A) A homogeneous solution (say of phenol water) is ... a decreasing trend (C) Two liquids are completely separated into two layers (D) None of these

Last Answer : (A) A homogeneous solution (say of phenol water) is formed

Though liquid ammonia itself is a fertiliser (with 82% nitrogen content) yet it is commonly not used as such in a tropical country like India, because it (A) Has a pungent smell (B) Vaporises at normal temperature (C) Is toxic and highly corrosive (D) Is in short supply

Description : Though liquid ammonia itself is a fertiliser (with 82% nitrogen content) yet it is commonly not used as such in a tropical country like India, because it (A) Has a pungent smell (B) Vaporises at normal temperature (C) Is toxic and highly corrosive (D) Is in short supply

Last Answer : (B) Vaporises at normal temperature

Diesel index is defined as (A) (°API) × (Aniline Point, °F)/100 (B) (°API) × (Aniline Point, °C)/100 (C) (°API) × (100)/Aniline Point, °F (D) (°API) × (100)/Aniline Point, °C

Description : Diesel index is defined as (A) (°API) × (Aniline Point, °F)/100 (B) (°API) × (Aniline Point, °C)/100 (C) (°API) × (100)/Aniline Point, °F (D) (°API) × (100)/Aniline Point, °C

Last Answer : (A) (°API) × (Aniline Point, °F)/100

High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

Description : High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

Last Answer : (C) Is highly paraffinic

Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Description : Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Last Answer : (B) Paraffin

Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline

Description : Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline

Last Answer : (C) Naphtha

Aniline point of high speed diesel may be about __________ °C. (A) 35 (B) 70 (C) 105 (D) 150

Description : Aniline point of high speed diesel may be about __________ °C. (A) 35 (B) 70 (C) 105 (D) 150

Last Answer : (B) 70

High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor

Description : High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor

Last Answer : (B) It is highly paraffinic in nature

In the diving apparatus, helium is used along with oxygen, because it is (A) Easily available (B) Not soluble in blood at high pressure (C) Lighter than nitrogen (D) Completely miscible with oxygen

Description : In the diving apparatus, helium is used along with oxygen, because it is (A) Easily available (B) Not soluble in blood at high pressure (C) Lighter than nitrogen (D) Completely miscible with oxygen

Last Answer : (B) Not soluble in blood at high pressure

Copper is completely miscible with (A) nickel. (B) gold. (C) hydrogen. (D) lead.

Description : Copper is completely miscible with (A) nickel. (B) gold. (C) hydrogen. (D) lead.

Last Answer : (B) gold.

Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Description : Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Last Answer : (C) Aromatic

Which of the following tests is not done for transformer oil? (A) Flash point and acid value (B) Aniline point (C) Dielectric strength (D) Copper strip corrosion test

Description : Which of the following tests is not done for transformer oil? (A) Flash point and acid value (B) Aniline point (C) Dielectric strength (D) Copper strip corrosion test

Last Answer : (B) Aniline poin

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

A solute distributes itself between two non-miscible solvents in contact with each other in such a way that, at a constant temperature, the ratio of its concentrations in two layers is constant, irrespective of its total amount". This is (A) The distribution law (B) Followed from Margules equation (C) A corollary of Henry's law (D) None of these

Description : A solute distributes itself between two non-miscible solvents in contact with each other in such a way that, at a constant temperature, the ratio of its concentrations in two layers is constant, irrespective of ... B) Followed from Margules equation (C) A corollary of Henry's law (D) None of these

Last Answer : (A) The distribution law

A plait point is the point on the solubility curve, where the tie line reduces to a point. What is the number of plait point for a ternary system containing two pairs of partially miscible liquids? (A) 0 (B) 1 (C) 2 (D) 3

Description : A plait point is the point on the solubility curve, where the tie line reduces to a point. What is the number of plait point for a ternary system containing two pairs of partially miscible liquids? (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0

One mole of aniline warmed with the mixture of `NaNO_(2)+HCl`. If we assume 100% yield, volume of `N_(2)` gas liberated at S.T.P is

Description : One mole of aniline warmed with the mixture of `NaNO_(2)+HCl`. If we assume 100% yield, volume of `N_(2)` gas liberated at S.T.P is

Last Answer : One mole of aniline warmed with the mixture of `NaNO_(2)+HCl`. If we assume 100% yield, volume of `N_(2)` gas ... 4 L` C. `33.6 L` D. `44.8 L`

Ribbon blenders are exclusively meant for (A) Blending miscible liquids (B) Non-flowing powder and thin pastes (C) Bath mixing (D) Continuous mixing

Description : Ribbon blenders are exclusively meant for (A) Blending miscible liquids (B) Non-flowing powder and thin pastes (C) Bath mixing (D) Continuous mixing

Last Answer : (B) Non-flowing powder and thin pastes

A gravity decanter is meant for the separation of two __________ density. (A) Immiscible liquids of different (B) Miscible liquids of different (C) Immiscible liquids of same (D) Miscible liquids of same

Description : A gravity decanter is meant for the separation of two __________ density. (A) Immiscible liquids of different (B) Miscible liquids of different (C) Immiscible liquids of same (D) Miscible liquids of same

Last Answer : (A) Immiscible liquids of different

Sides of equilateral-triangular co-ordinates (on which ternary liquid system is plotted) represent (A) A pure component (B) A binary mixture (C) A ternary mixture (D) Partially miscible ternary system

Description : Sides of equilateral-triangular co-ordinates (on which ternary liquid system is plotted) represent (A) A pure component (B) A binary mixture (C) A ternary mixture (D) Partially miscible ternary system

Last Answer : (B) A binary mixture

What is the number of degree of freedom for a system of two miscible non-reacting species in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 2 (C) 1 (D) 3

Description : What is the number of degree of freedom for a system of two miscible non-reacting species in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 2 (C) 1 (D) 3

Last Answer : (C) 1

What is the degree of freedom for two miscible (non-reacting) substances in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 1 (C) 2 (D) 3

Description : What is the degree of freedom for two miscible (non-reacting) substances in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (C) 2

Fugacity is a measure of the (A) Escaping tendencies of the same substance in different phases of a system (B) Relative volatility of a mixture of two miscible liquids (C) Behaviour of ideal gases (D) None of these

Description : Fugacity is a measure of the (A) Escaping tendencies of the same substance in different phases of a system (B) Relative volatility of a mixture of two miscible liquids (C) Behaviour of ideal gases (D) None of these

Last Answer : (A) Escaping tendencies of the same substance in different phases of a system

When using a pumping loop to mix two miscible fluids in a tank, when can the content are considered well mixed?

Description : When using a pumping loop to mix two miscible fluids in a tank, when can the content are considered well mixed?

Last Answer : A rule of thumb is to turn the tank over three (3) times and then sample the tank for mixture properties. By “turn the tank over”, we mean to force the entire volume of the tank through the pump at least three times. More turnovers may be necessary, but three times is a good starting point.

Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Description : Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Last Answer : (C) Luminosity number

A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Description : A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (A) Viscosity index

Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Description : Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (C) Aniline point

In a consolidated drained test on a normally consolidated clay, the volume of the soil sample during shear (A) Decreases (B) Increases (C) Remains unchanged (D) First increases and then decreases

Description : In a consolidated drained test on a normally consolidated clay, the volume of the soil sample during shear (A) Decreases (B) Increases (C) Remains unchanged (D) First increases and then decreases

Last Answer : (A) Decreases

or a given spray sample: A. The volume median diameter (VMD) is equal to number median diameter (NMD). B. The VMD is less than the NMD. C. The VMD is larger than the NMD. D. None of the above.

Description : or a given spray sample: A. The volume median diameter (VMD) is equal to number median diameter (NMD). B. The VMD is less than the NMD. C. The VMD is larger than the NMD. D. None of the above.

Last Answer : C. The VMD is larger than the NMD.

PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?

Description : PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?

Last Answer : {

A moist soil sample of volume 60 cc. weighs 108 g and its dried weight is 86.4 g. If its absolute density is 2.52, the degree of saturation is (A) 54 % (B) 64 % (C) 74 % (D) 84 %

Description : A moist soil sample of volume 60 cc. weighs 108 g and its dried weight is 86.4 g. If its absolute density is 2.52, the degree of saturation is (A) 54 % (B) 64 % (C) 74 % (D) 84 %

Last Answer : (D) 84 %

The water content in a soil sample when it continues to loose weight without loosing the volume, is called (A) Shrinkage limit (B) Plastic limit (C) Liquid limit (D) Semi-solid limit

Description : The water content in a soil sample when it continues to loose weight without loosing the volume, is called (A) Shrinkage limit (B) Plastic limit (C) Liquid limit (D) Semi-solid limit

Last Answer : Answer: Option A

Which of the following is the best example of law of conservation of mass? [NCERT 1975] (A) 12 g of carbon combines with 32 g of oxygen to form 44 g of CO2. (B) When 12 g of carbon is heated in a vacuum there is no change in mass. (C) A sample of air increases in volume when heated at constant pressure but its mass remains unaltered. (D) The weight of a piece of platinum is the same before and after heating in air.

Description : Which of the following is the best example of law of conservation of mass? [NCERT 1975] (A) 12 g of carbon combines with 32 g of oxygen to form 44 g of CO2. (B) When 12 g of carbon is ... mass remains unaltered. (D) The weight of a piece of platinum is the same before and after heating in air.

Last Answer : (A) 12 g of carbon combines with 32 g of oxygen to form 44 g of CO2.

Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Description : Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Last Answer : (C) Aromatics

a gas has a pressure of 766.7 torr at a temperature of 10.0°C. the sample contains 2.35 moles of xenon. what is the volume of the gas in liters?

Description : a gas has a pressure of 766.7 torr at a temperature of 10.0°C. the sample contains 2.35 moles of xenon. what is the volume of the gas in liters?

Last Answer : Using PV=nRT, 10.0ºC = 283.15ºK, R = 62.36 L torr/mol KV= (nRT)/PV = (2.35m*(62.36 L torr/mol K)*283.15ºK)/766.7 TorrV = 54.12 L

Which of the following is TRUE of a sample of gas at a constant temperature when the pressure is doubled? w)the volume doubles x)the volume halves y)the volume remains the same

Description : Which of the following is TRUE of a sample of gas at a constant temperature when the pressure is doubled? w)the volume doubles x)the volume halves y)the volume remains the same

Last Answer : ANSWER: X -- THE VOLUME HALVES

A sample of gas has a volume of 210 cubic centimeters at a temperature of 250 degrees Kelvin. The temperature is raised to 500 degrees Kelvin while the pressure remains unchanged. What is the new volume of the gas.

Description : A sample of gas has a volume of 210 cubic centimeters at a temperature of 250 degrees Kelvin. The temperature is raised to 500 degrees Kelvin while the pressure remains unchanged. What is the new volume of the gas.

Last Answer : ANSWER: 420 CUBIC CENTIMETERS

How can I turn off the sound when using a sample video as my desktop wallpaper without turning off sound completely?

Description : How can I turn off the sound when using a sample video as my desktop wallpaper without turning off sound completely?

Last Answer : I figured it out! Right click anywhere on the “Dreamscene” (as it’s called) and select “Pause Dreamscene”. Couldn’t find this answer ANYWHERE on the net!

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

Pour point and freezing point is equal for (A) Petrol (B) Diesel (C) Water (D) Crude petroleum

Description : Pour point and freezing point is equal for (A) Petrol (B) Diesel (C) Water (D) Crude petroleum

Last Answer : (C) Water

Asserion (A): Ethanol is miscible in all proportions with water Reason (R): Hydrogen bond is formed between water and alcohol molecules.

Description : Asserion (A): Ethanol is miscible in all proportions with water Reason (R): Hydrogen bond is formed between water and alcohol molecules.

Last Answer : Asserion (A): Ethanol is miscible in all proportions with water Reason (R): Hydrogen bond is formed between ... is false D. A is false but R is true

Ethanol and Methanol are miscible in water due to

Description : Ethanol and Methanol are miscible in water due to

Last Answer : Ethanol and Methanol are miscible in water due to A. Dissociation of water B. Their acidic character C. Allyl groups D. Hydrogen bonding

What liquids are miscible to oil?

Description : What liquids are miscible to oil?

Last Answer : Need answer

Are water and ethanol miscible?

Description : Are water and ethanol miscible?

Last Answer : Yes, in all proportions. Wine, beer and other alcoholic drinksare all such mixtures.

Distillation can be used to separate solutions of miscible liquids because ?

Description : Distillation can be used to separate solutions of miscible liquids because ?

Last Answer : Distillation works because liquids boil at different temperatures. Roughly speaking, in order to separate two liquids, you should heat the mixture to a temperature where one of the liquids (but not the ... boil off, leaving the second liquid behind; you can collect the first liquid in a condenser.

Inert gases are - (1) Miscible with water (2) Not stable (3) Chemically uncreative (4) Chemically very active

Description : Inert gases are - (1) Miscible with water (2) Not stable (3) Chemically uncreative (4) Chemically very active

Last Answer : (3) Chemically uncreative Explanation: An inert gas is a gas which does not undergo chemical reactions since their valence shells are filled, meaning they don't normally form chemical bonds with other ... inert gases, also called noble gases, are argon, helium, neon, krypton, xenon and radon.

Inert gases are (1) Miscible with water (2) Not stable (3) Chemically unreactive (4) Chemically very active

Description : Inert gases are (1) Miscible with water (2) Not stable (3) Chemically unreactive (4) Chemically very active

Last Answer : Chemically unreactive