Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene
Last Answer : (A) Terylene
Description : Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these
Last Answer : (C) PVC
Description : __________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene
Last Answer : (A) Teflon
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite
Last Answer : (B) Nylon-66
Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite
Last Answer : (A) Polyisoprene
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit
Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC
Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66. (b) Neoprene, PVC and Nylon 6.
Description : Nylon-6, 10 which is used for bristles making is superior to nylon 6, 6 due to its lower water absorption capacity, is a/an (A) Polyester (B) Polyamide (C) Polyisopren
Last Answer : (B) Polyamide
Description : __________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC
Last Answer : (A) Nylon-66
Description : Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC
Last Answer : (A) Polystyrene
Description : Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC
Last Answer : (A) Expanded polystyrene
Description : __________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene
Last Answer : (C) Bakelite
Description : __________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene
Last Answer : (C) Teflon/Dacron
Description : Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene
Last Answer : (A) Epoxy polymer
Description : Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6
Last Answer : (B) As plasticisers
Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC
Last Answer : (B) Dacron
Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC
Description : What material is most often used for the outer covering of coaxial cables? A. PVC B. Teflon C. PE D. Polystyrene
Last Answer : A. PVC
Description : Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.
Last Answer : Ans: Nylon 6 —Condensation polymer Neoprene and PVC— Addition polymer.
Description : Arrange the following Polymers in increasing order of inter molecular forces Nylon 6, Neoprene and PVC
Last Answer : Ans : Nylon 6, PVC and. Neop
Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)
Last Answer : (C) Higher hardness
Description : Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon
Last Answer : (A) Nylon-6
Description : Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR
Last Answer : (B) Nylon-6
Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin
Description : Polycaprolactam is nothing but (A) Orlon (B) Nylon-66 (C) Nylon-6 (D) Saran
Last Answer : (C) Nylon-6
Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these
Last Answer : (B) Hexamethylene diamine and the adipic acid
Description : Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness
Last Answer : (A) Abrasion resistance
Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these
Last Answer : (D) None of these
Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Diamine and the ring (B) Dibasic acid and the ring (C) Diamine and the dibasic acid (D) None of these
Last Answer : (C) Diamine and the dibasic acid
Description : Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon
Description : Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966
Last Answer : (A) Average degree of polymerisation of the polymer is 1966
Description : Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these
Description : Which of the following polymers contain nitrogen (a) PVC (b) Teflon (c) Nylon (d) Terylene
Last Answer : Nylon
Description : Why are the numbers 6, 6 and 6 put in the name of Nylon 66 and Nylon 6?
Last Answer : Ans: Nylon 66 means that it is formed by two monomers each containing six carbon atoms. While in Nylon 6 means that it is formed by a monomer containing six carbon atoms.
Description : Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber
Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these
Last Answer : (A) Hexamethylene diamine and adipic acid
Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite
Last Answer : (B) Teflon
Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol
Last Answer : (A) Adipic acid and Hexamethylene diamine
Description : __________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene
Last Answer : (A) Neoprene
Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66
Last Answer : (B) Bakelite
Description : The inter particle forces between linear chains in nylon-66 are __________ bonds. (A) Hydrogen (B) Covalent (C) Ionic (D) None of these
Last Answer : (A) Hydrogen
Description : The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid
Last Answer : (C) Adipic acid
Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol
Description : P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66
Last Answer : (C) Teflon
Description : Nylon-66 is obtained from:
Last Answer : Nylon-66 is obtained from: A. Hexamethylene diamine and adipic acid B. Phenol and formaldehyde C. ... and adipic acid D. Adipic acid and phthalic acid
Description : ______ fiber is used in making bulletproof vests. (1) Nylon-66 (2) Terylene (3) Kevlar (4) Lexan
Last Answer : (3) Kevlar Explanation: Kevlar, a para-aramid synthetic fiber, is used for making bullet proof vests protective inserts.
Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite
Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.
Description : Clasify the polymers as addition and condenstation polymers. Nylon 66, Buna-S, Polythene.
Last Answer : Ans: Nylon 66 condensation polymer. Buna-S and polythene—Addition polymer.