Explain law of demand and law of supply.

1 Answer

Answer :

The Law of Demand

The law of demand states that, if all other factors remain equal, the higher the price of a good, the less people will demand that good. In other words, the higher the price, the lower the quantity demanded. The amount of a good that buyers purchase at a higher price is less because as the price of a good goes up, so does the opportunity cost of buying that good. As a result, people will naturally avoid buying a product that will force them to forgo the consumption of something else they value more. The chart below shows that the curve is a downward slope. A, B and C are points on the demand curve. Each point on the curve reflects a direct correlation between quantity demanded (Q) and price (P). So, at point A, the quantity demanded will be Q1 and the price will be P1, and so on. The demand relationship curve illustrates the negative relationship between price and quantity demanded. The higher the price of a good the lower the quantity demanded (A), and the lower the price, the more the good will be in demand (C). 

image


The Law of Supply

Like the law of demand, the law of supply demonstrates the quantities that will be sold at a certain price. But unlike the law of demand, the supply relationship shows an upward slope. This means that the higher the price, the higher the quantity supplied. Producers supply more at a higher price because selling a higher quantity at a higher price increases revenue. A, B and C are points on the supply curve. Each point on the curve reflects a direct correlation between quantity supplied (Q) and price (P). At point B, the quantity supplied will be Q2 and the price will be P2, and so on.

image

Related questions

Description : Explain the procedure of detailed energy audit.

Last Answer : Detailed Energy Audit Detailed audit provides a detailed project implementation plan for a facility, since it evaluate all major energy using systems. This type of audit offers the ... Management aspects of design and operating data collection, field measurements, data analysis, and training

Description : Explain any four important properties of petroleum fuel.

Last Answer : Properties of petroleum fuel The flash point of a volatile fuel is the lowest temperature at which it can vaporize to form an ignitable mixture in air. The flash point is an important concept in ... of combustion contain the water vapor and that the heat in the water vapor is not recovered.

Description : Explain construction and working of solar water heater.

Last Answer : Solar Water Heater  Construction A typical domestic solar water heater consists of a hot water storage tank and one or more flat plate collectors. Inlet and outlet pipes are connected ... the tank continues automatically due to density difference between hot and cold water (thermosyphon effect).

Description : Explain energy conservation and its importance.

Last Answer : Energy conservation Energy Conservation is the deliberate practice or an attempt to save electricity, fuel oil or gas or any other combustible material, to be able to put to additional use for ... are produced. e) Generally to relieve shortage and improve development. f) Advantage in PAT scheme.

Description : Explain construction of biogas plant.

Last Answer : Fixed Roof Biogas Plant  Construction It consits of inlet tank, digester and outlet tank. Sluury is prepeared in inlet tank. Mass is digeated in digester. Gas is collected at the top dome. Digested mass ... digester gas can supply useful energy in the form of hot air, hot water or steam.

Description : Outline the process of accounting.

Last Answer : Process of accounting An accounting system tracks and controls the income and expenses of a business. Accounting systems can be as simple as a pen and notepad, and can be as complex ... find themselves required to create reports for external stakeholders, such as lenders and private investors. 

Description : Describe the concept of fixed cost, variable cost and total cost.

Last Answer : Total cost  Total cost refers to total expense incurred in reaching a particular level of output, if such total cost is divided by quantity produced average or unit cost is obtained. The ... . Direct material, direct labour, direct expenses, variable overheads are some examples of variable cost.

Description : Outline any four duties and responsibilities of energy manager.

Last Answer : Responsibilities and Duties of Energy Manager Responsibilities Prepare an annual activity plan and present to management concerning financially attractive investments to reduce energy costs Establish an ... and manner as may be provided in the regulations of the Energy Conservation Act.

Description : List the advantages and disadvantages of hydropower. 

Last Answer : Hydropower plant Advantages Renewable - Hydroelectric energy is renewable. This means that we cannot use up. However, there's only a limited number of suitable reservoirs where hydroelectric power ... MW under construction. Only one of these projects was started in the last two years. 

Description : Illustrate the benefits of hydrogen energy as a future energy.

Last Answer : Benefits of Hydrogen Energy The use of hydrogen greatly reduces pollution. When hydrogen is combined with oxygen in a fuel cell, energy in the form of electricity is produced. This electricity can ... sources of fuel. This ideally means that you need less hydrogen to complete an enormous task.

Description : State various types of energy losses with their control measures in any utility.

Last Answer : Energy loss and control in any utility Energy saving opportunities in cooling tower (These measures will save electrical energy used in fan or pumps) 1. Follow manufacturer's recommended ... Preheating combustion air 10. Switching from steam to air atomization Switching to lower cost fuel

Description : Define calorific value. Differentiate between net calorific value and gross calorific value.

Last Answer : Calorific value of fuel  The amount of energy produced by the complete combustion of a material or fuel.  Measured in units of energy per amount of material, e.g. kJ/kg. Difference between NCV and GCV ... is not an actual heat available for use. It is an actual heat available for use.

Description : Describe profitability evaluation by rate of return on investment. 

Last Answer : Profitability by ROI Return on investment, or ROI, is the most common profitability ratio. There are several ways to determine ROI, but the most frequently used method is to divide net profit by total ... investment types. Return on investment = (revenue − cost of goods sold) / cost of goods sold

Description : Classify energy sources with two examples each.

Last Answer : Types of energy Source  Primary energy source is an energy form found in nature that has not been subjected to any conversion or transformation process. The primary energy sources are derived from: the sun, ... energy sources: These sources can renew again and again. e.g Solar, Wind, Biomass, Hydro

Description : State two objectives of energy audit.

Last Answer : Objective of energy audit  To determine ways to reduce energy consumption per unit of product output or to lower operating costs. Energy Audit provides a bench-mark" (Reference ... effective use of energy throughout the organization. Provide detailed documentation for monitoring of energy use

Description : List the two factors affecting on cost estimation.

Last Answer : Factors affecting cost estimation 1) Labor Wage Rates 2) Inflation Factor 3) Project Schedule 4) Quality of Plans & Specifications 5) Reputation of Engineer 6) Regulatory Requirements 7) Insurance Requirements 8) Size and Type of Project 9) Location 10) Contingency

Description : Define balance sheet.

Last Answer : Balance sheet  It is a statement of the assets, liabilities, and capital of a business or other organization at a particular point in time, detailing the balance of income and expenditure over the preceding period.

Description : List various types of costs. 

Last Answer : Types of Cost Total Cost Fixed Cost Variable cost Direct cost Indirect Cost

Description : State the use of Lux Meter and Tachometer in energy audit.

Last Answer : Use of lux meter – to measure intensity of light Use of tachometer – to measure speed

Description : List four environmental benefits of wind energy.

Last Answer : Environmental benefits of Wind Energy 1. Renewable & Sustainable 2. Environmentally Friendly 3. Reduces Fossil Fuel Consumption 4. Small Footprint

Description : State any two units of energy.

Last Answer : Units of energy: Joule Calorie Kilowatt Kilowatt-hour Watt

Description : State the difference between energy conservation and energy audit. 

Last Answer : energy conservation Energy audit It is reducing the growth of energy consumption by avoiding unnecessary usage of energy It is an inspection, survey & analysis of energy flows ... Various measuring instruments, with proper sensing elements are required for the energy audit. 

Description : Problems on electrical power and energy

Last Answer : Problem on electrical power and energy 1 : https://youtu.be/ZvWHuMdmv9g Problem on electrical power and energy 2 : https://youtu.be/19IZMc6U2vs Problem on electrical power and energy 3 : https ... : https://youtu.be/iYqGIwA919A Problem on electrical power and energy : https://youtu.be/iWnWQz_mzHk

Description : Problem on electrical power and energy 2

Last Answer : Problem on electrical power and energy 2

Description : Problem on electrical power and energy 1

Last Answer : Problem on electrical power and energy 1

Description : Problem on electrical power and energy 7

Last Answer : Problem on electrical power and energy 7

Description : Problem on electrical power and energy 6

Last Answer : Problem on electrical power and energy 6

Description : Problem on electrical power and energy 5

Last Answer : Problem on electrical power and energy 5

Description : In time-cost optimization of a project, crashing is done. (A) On all the activities (B) On all the activities lying on the critical path (C) Only on activities lying on the ... critical activities and those that become critical at any stage of crashing in the order of ascending cost slope

Last Answer : D

Description : Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Last Answer : 1. A step down transformer 2. A rectifier 3. A filter 4. A regulator Operation of Regulated Power Supply:- Step Down Transformer:- A step down transformer will ... regulator. A regulator will maintain the output constant even when changes at the input or any other changes occur.

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Last Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

Last Answer : In a power plant if the maximum demand on the plant is equal to the plant capacity, then plant reserve capacity will be zero.

Last Answer : Maximum demand on a power plant is the greatest of all "short time interval averaged" demand during a period.

Description : Which of the following is not a greenhouse gas ? a) CFCs b) SO2 c) PFC d) SF6

Last Answer : b) SO2

Description : Explain the following a) Dry Bulb Temperature and Wet bulb Temperature b) Maximum Demand and Power Factor c) Gross Calorific Value & Net Calorific Value d) 5S & Return of Investment (ROI) e) CUSUM

Last Answer : a) Dry Bulb Temperature and Wet bulb Temperature Dry bulb Temperature is an indication of the sensible heat content of air-water vapour  mixtures Wet bulb Temperature is a measure of ... of capital cost. This is a broad indicator of the annual return expected from initial capital investment

Description : Explain the following assembler directives. 1) DB 2) DUP 3) EQU 4) ENDs.

Last Answer : 1) DB (Define Byte or Data Byte): This is used to define a byte type variable. The range of values : 0 - 255 for unsigned numbers -128 to 127 for signed numbers This can be used ... the end of the segment The directives SEGMENT, ENDS are always enclosed in data, code, stack and extra segments.

Description : Explain MCB and ELCB with connection diagram supplying single phase load. 

Last Answer : OR OR Explanation: * MCB provides short circuit protection. * MCB provides overload protection * ELCB provides earth fault protection. * MCB is in series with ... occurs, the ELCB cuts off the power within the time of 0.1 sec. automatically to protect the personnel. 

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Last Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

Description : Draw and explain V and inverted V curves for synchronous motor.

Last Answer : V curves' and inverted V curves' for Synchronous Motor:  V curve:  V curve is a plot of the stator current versus field current for different constant loads. The graph is plotted ... Vcurves of synchronous motor. The highest point on each of these curves indicates unity power factor.

Description : Explain construction and working of AC servomotor.

Last Answer : Construction of AC Servo Motor: AC servo motor is mainly composed of a stator and a rotor. Laminated stator core is usually made of silicon steel. Two phase windings are placed in the stator slots at 90 degree ... on rotor. Due to the force or torque acting on the rotor, it is set in motion. 

Description : Explain dynamic and static induced emf with neat diagram.

Last Answer : Dynamically Induced EMF:-  In this case, either coil moves or magnet moves, so that there is relative motion between coil & magnetic field. Thus magnetic field is cut by coil & emf is induced in it. The emf ... The expression for induced EMF is e= -L(di/dt) or = -N(dϕ/dt).

Description : Explain the concept of lagging and leading phase angle by waveform.

Last Answer : i) Leading phase angle :  When two ac quantities of same frequency do not attain their respective zero or peak values simultaneously, then the quantities are said to be out-of-phase quantities. The ... Similarly, in the second diagram, the voltage is said to be lagging the current by  Φ.

Description : How much are our wars increasing the demand for oil?

Last Answer : I’m completely speculating here but would it be fair to say that the closer we get to running out of entire global supplies, the more we will see military incursions to try to forcefully obtain remaining sources of oil?

Description : A building intended to be used for commercial purpose will be required to follow Energy conservation building code under Energy Conservation Act, 2001 provided its a) connected load is 120 kW and above b) ... and above c) connected load is100 kW and above or contract demand is 120 kVA and above

Last Answer : c) connected load is100 kW and above or contract demand is 120 kVA and above

Description : Explain the construction and working of induced draft cooling tower with neat sketch.

Last Answer : Induced draft cooling tower :  Diagram: Construction and working: Cooling towers are employed to cool utility cooling water by direct contact with air. The parts of a cooling tower are ... top pulls the hot air through the fills and cooled water gets collected in the cold water basin.

Description : Explain the method for obtaining instrument air in industry.

Last Answer : Instrument air: Air is passed through a filter to remove suspended impurities. The filtered air is supplied to the compressor. Discharge from the compressor will be at a pressure of 100 to 150 ... pressure regulator is sometimes added to provide a constant reduced pressure in the supply line.

Description : Explain boiler act with respect to (i) Duties of chief inspector (ii) Registration of boiler.

Last Answer : Boiler act: Duties of chief inspector: Maintain records of registered boilers. Examine boiler inspection reports produced by inspectors. Decide whether to issue the certificate for the operation of ... shall examine the boiler and find maximum pressure at which the boiler may be operated.

Description : Explain working of water level indicator with neat sketch.

Last Answer : Water level indicator: Working: Its function to indicate water level in boiler. usually two water level indicator are fitted to in front of boiler. WLI shows the water level in in the boiler drum ... goes below a fixed mark , so that corrosive action may be taken in time to avoid accident. 

Description : Explain the working of cyclone separator with labelled diagram.

Last Answer : Cyclone separator: Working: Cyclone separators work much like a centrifuge, but with a continuous feed of dirty air. In a cyclone separator, dirty flue gas is fed into a chamber. The inside ... at the bottom of the container. The cleaned flue gas escapes out the top of the chamber.