State two objectives of energy audit.

State two objectives of energy audit.
by

1 Answer

Answer :

Objective of energy audit 

 To determine ways to reduce energy consumption per unit of product output or to lower operating costs.  Energy Audit provides a “bench-mark" (Reference point) for managing energy in the organization and also provides the basis for planning a more effective use of energy throughout the organization.  Provide detailed documentation for monitoring of energy use
by

Related questions

State the use of Lux Meter and Tachometer in energy audit.

Description : State the use of Lux Meter and Tachometer in energy audit.

Last Answer : Use of lux meter – to measure intensity of light Use of tachometer – to measure speed

Explain the procedure of detailed energy audit.

Description : Explain the procedure of detailed energy audit.

Last Answer : Detailed Energy Audit Detailed audit provides a detailed project implementation plan for a facility, since it evaluate all major energy using systems. This type of audit offers the ... Management aspects of design and operating data collection, field measurements, data analysis, and training

State any two units of energy.

Description : State any two units of energy.

Last Answer : Units of energy: Joule Calorie Kilowatt Kilowatt-hour Watt

State various types of energy losses with their control measures in any utility.

Description : State various types of energy losses with their control measures in any utility.

Last Answer : Energy loss and control in any utility Energy saving opportunities in cooling tower (These measures will save electrical energy used in fan or pumps) 1. Follow manufacturer's recommended ... Preheating combustion air 10. Switching from steam to air atomization Switching to lower cost fuel

Classify energy sources with two examples each.

Description : Classify energy sources with two examples each.

Last Answer : Types of energy Source  Primary energy source is an energy form found in nature that has not been subjected to any conversion or transformation process. The primary energy sources are derived from: the sun, ... energy sources: These sources can renew again and again. e.g Solar, Wind, Biomass, Hydro

Outline any four duties and responsibilities of energy manager.

Description : Outline any four duties and responsibilities of energy manager.

Last Answer : Responsibilities and Duties of Energy Manager Responsibilities Prepare an annual activity plan and present to management concerning financially attractive investments to reduce energy costs Establish an ... and manner as may be provided in the regulations of the Energy Conservation Act.

Illustrate the benefits of hydrogen energy as a future energy.

Description : Illustrate the benefits of hydrogen energy as a future energy.

Last Answer : Benefits of Hydrogen Energy The use of hydrogen greatly reduces pollution. When hydrogen is combined with oxygen in a fuel cell, energy in the form of electricity is produced. This electricity can ... sources of fuel. This ideally means that you need less hydrogen to complete an enormous task.

Explain energy conservation and its importance.

Description : Explain energy conservation and its importance.

Last Answer : Energy conservation Energy Conservation is the deliberate practice or an attempt to save electricity, fuel oil or gas or any other combustible material, to be able to put to additional use for ... are produced. e) Generally to relieve shortage and improve development. f) Advantage in PAT scheme.

List four environmental benefits of wind energy.

Description : List four environmental benefits of wind energy.

Last Answer : Environmental benefits of Wind Energy 1. Renewable & Sustainable 2. Environmentally Friendly 3. Reduces Fossil Fuel Consumption 4. Small Footprint

List the two factors affecting on cost estimation.

Description : List the two factors affecting on cost estimation.

Last Answer : Factors affecting cost estimation 1) Labor Wage Rates 2) Inflation Factor 3) Project Schedule 4) Quality of Plans & Specifications 5) Reputation of Engineer 6) Regulatory Requirements 7) Insurance Requirements 8) Size and Type of Project 9) Location 10) Contingency

Outline the process of accounting.

Description : Outline the process of accounting.

Last Answer : Process of accounting An accounting system tracks and controls the income and expenses of a business. Accounting systems can be as simple as a pen and notepad, and can be as complex ... find themselves required to create reports for external stakeholders, such as lenders and private investors. 

Explain law of demand and law of supply.

Description : Explain law of demand and law of supply.

Last Answer : The Law of Demand The law of demand states that, if all other factors remain equal, the higher the price of a good, the less people will demand that good. In other words, the higher the price, the lower ... ). At point B, the quantity supplied will be Q2 and the price will be P2, and so on.

Describe the concept of fixed cost, variable cost and total cost.

Description : Describe the concept of fixed cost, variable cost and total cost.

Last Answer : Total cost  Total cost refers to total expense incurred in reaching a particular level of output, if such total cost is divided by quantity produced average or unit cost is obtained. The ... . Direct material, direct labour, direct expenses, variable overheads are some examples of variable cost.

List the advantages and disadvantages of hydropower.

Description : List the advantages and disadvantages of hydropower. 

Last Answer : Hydropower plant Advantages Renewable - Hydroelectric energy is renewable. This means that we cannot use up. However, there's only a limited number of suitable reservoirs where hydroelectric power ... MW under construction. Only one of these projects was started in the last two years. 

Explain any four important properties of petroleum fuel.

Description : Explain any four important properties of petroleum fuel.

Last Answer : Properties of petroleum fuel The flash point of a volatile fuel is the lowest temperature at which it can vaporize to form an ignitable mixture in air. The flash point is an important concept in ... of combustion contain the water vapor and that the heat in the water vapor is not recovered.

Explain construction and working of solar water heater.

Description : Explain construction and working of solar water heater.

Last Answer : Solar Water Heater  Construction A typical domestic solar water heater consists of a hot water storage tank and one or more flat plate collectors. Inlet and outlet pipes are connected ... the tank continues automatically due to density difference between hot and cold water (thermosyphon effect).

Define calorific value. Differentiate between net calorific value and gross calorific value.

Description : Define calorific value. Differentiate between net calorific value and gross calorific value.

Last Answer : Calorific value of fuel  The amount of energy produced by the complete combustion of a material or fuel.  Measured in units of energy per amount of material, e.g. kJ/kg. Difference between NCV and GCV ... is not an actual heat available for use. It is an actual heat available for use.

Describe profitability evaluation by rate of return on investment.

Description : Describe profitability evaluation by rate of return on investment. 

Last Answer : Profitability by ROI Return on investment, or ROI, is the most common profitability ratio. There are several ways to determine ROI, but the most frequently used method is to divide net profit by total ... investment types. Return on investment = (revenue − cost of goods sold) / cost of goods sold

Explain construction of biogas plant.

Description : Explain construction of biogas plant.

Last Answer : Fixed Roof Biogas Plant  Construction It consits of inlet tank, digester and outlet tank. Sluury is prepeared in inlet tank. Mass is digeated in digester. Gas is collected at the top dome. Digested mass ... digester gas can supply useful energy in the form of hot air, hot water or steam.

Define balance sheet.

Description : Define balance sheet.

Last Answer : Balance sheet  It is a statement of the assets, liabilities, and capital of a business or other organization at a particular point in time, detailing the balance of income and expenditure over the preceding period.

List various types of costs.

Description : List various types of costs. 

Last Answer : Types of Cost Total Cost Fixed Cost Variable cost Direct cost Indirect Cost

State the difference between energy conservation and energy audit.

Description : State the difference between energy conservation and energy audit. 

Last Answer : energy conservation Energy audit It is reducing the growth of energy consumption by avoiding unnecessary usage of energy It is an inspection, survey & analysis of energy flows ... Various measuring instruments, with proper sensing elements are required for the energy audit. 

Problems on electrical power and energy

Description : Problems on electrical power and energy

Last Answer : Problem on electrical power and energy 1 : https://youtu.be/ZvWHuMdmv9g Problem on electrical power and energy 2 : https://youtu.be/19IZMc6U2vs Problem on electrical power and energy 3 : https ... : https://youtu.be/iYqGIwA919A Problem on electrical power and energy : https://youtu.be/iWnWQz_mzHk

Problem on electrical power and energy 2

Description : Problem on electrical power and energy 2

Last Answer : Problem on electrical power and energy 2

Problem on electrical power and energy 1

Description : Problem on electrical power and energy 1

Last Answer : Problem on electrical power and energy 1

Problem on electrical power and energy 7

Description : Problem on electrical power and energy 7

Last Answer : Problem on electrical power and energy 7

Problem on electrical power and energy 6

Description : Problem on electrical power and energy 6

Last Answer : Problem on electrical power and energy 6

Problem on electrical power and energy 5

Description : Problem on electrical power and energy 5

Last Answer : Problem on electrical power and energy 5

In time-cost optimization of a project, crashing is done. (A) On all the activities (B) On all the activities lying on the critical path (C) Only on activities lying on the original critical path and having flatter cost slopes (D) On original critical activities and those that become critical at any stage of crashing in the order of ascending cost slope

Description : In time-cost optimization of a project, crashing is done. (A) On all the activities (B) On all the activities lying on the critical path (C) Only on activities lying on the ... critical activities and those that become critical at any stage of crashing in the order of ascending cost slope

Last Answer : D

Which of the following is not a greenhouse gas ? a) CFCs b) SO2 c) PFC d) SF6

Description : Which of the following is not a greenhouse gas ? a) CFCs b) SO2 c) PFC d) SF6

Last Answer : b) SO2

Answer the following S. No Statement Chose the correct answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the blanks 3 Non Contact Infrared Thermometer cannot measure temperature of objects placed in hazardous places True/False 4 To measure the RPM of a Flywheel, ______ type of RPM meter is used and for a visible shaft-end _______ type of RPM meter is used. Fill in the blanks 5 In a switch yard, _____ instrument is used to identify the loose joints and terminations Fill in the blanks 6 Every Designated Consumer shall have its first energy audit conducted by ________ Energy Auditor within ______ months of

Description :  Answer the following S. No Statement Chose the correct  answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the ... of RPM  meter is used and for a visible shaft-end _______ type of  RPM meter is used.

Last Answer : Sr  No Statement Chose the correct  answer OR Fill-in-the-blanks Solution 1 Fyrite measures CO2, O2 and  SO2 True/False False 2 Ultrasonic Flow Meter uses the  principle of____& ____ ... ]  10 In a gasification system the  reduction zone is above the  combustion zone True/False False

Which of the following criteria is a responsibility of DesignatedConsumer? a) designate or appoint an accredited Energy Auditor b) adhere to stipulated energy consumption norms and standards as notified c) submit the status of energy consumption information every three years d) conduct energy audit through a certified energy auditor periodically

Description : Which of the following criteria is a responsibility of DesignatedConsumer? a) designate or appoint an accredited Energy Auditor b) adhere to stipulated energy consumption norms and standards ... information every three years d) conduct energy audit through a certified energy auditor periodically

Last Answer : b) adhere to stipulated energy consumption norms and standards as notified

Which of the following is not a part of energy audit as per the Energy Conservation Act, 2001? a) monitoring and analysis of energy use b) verification of energy use c) submission of technical report with recommendations d) ensuring implementation of recommended measures followed by review

Description : Which of the following is not a part of energy audit as per the Energy Conservation Act, 2001? a) monitoring and analysis of energy use b) verification of energy use c) submission of technical report with recommendations d) ensuring implementation of recommended measures followed by review

Last Answer : d) ensuring implementation of recommended measures followed by review

Explain stepwise the “Detailed energy audit” procedure.

Description : Explain stepwise the “Detailed energy audit” procedure.

Last Answer : A) Start up meeting: For this programme, we proceed with this meeting. If then continue us until implementation of energy saving measures. B) Analysis of energy used: Identify where ... are considered, the analysis of energy loss and measurement of insulation level is also considered.

Define memory segmentation. How memory segmentation is achieved in 8086? State advantages of memory segmentation.

Description : Define memory segmentation. How memory segmentation is achieved in 8086? State advantages of memory segmentation.

Last Answer : Memory Segmentation: The memory in an 8086 microprocessor is organized as a segmented memory. The physical memory is divided into 4 segments namely, - Data segment, Code Segment, Stack Segment and Extra ... 16 bit size. 6) Programs and data can be stored separately from each other in segmentation.

State the use of OF and DF flags of 8086 microprocessor.

Description : State the use of OF and DF flags of 8086 microprocessor.

Last Answer : Overflow Flag: This flag is set if an overflow occurs, i.e. if the result of a signed operation is large enough to be accommodated in destination register. Direction Flag: It selects either increment or decrement mode for DI &/or SI register during string instructions.

State the functions of following pins of 8085 1) SOD 2) HLDA

Description : State the functions of following pins of 8085 1) SOD 2) HLDA

Last Answer : 1) SOD: Serial Output data SOD pin is used to transmit data serially from accumulator to the external devices connected to the pin.  2) HLDA: Microprocessor generates HLDA signal to acknowledge requesting device after HOLD signal.

State the functions of temporary registers of 8085 microprocessor.

Description : State the functions of temporary registers of 8085 microprocessor.

Last Answer : Temp Register (8 bits) is also called as operand register as it is used by μp for storing one of the operands during an operation and also for storing the result of any execution temproary.

State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them.

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

State the type of insulating materials under Class Y and Class B.

Description : State the type of insulating materials under Class Y and Class B.

Last Answer : The type of insulating materials under Class Y : 1. Cotton  2. Silk 3. Paper 4. Rubber 5. PVC The type of insulating materials under Class B: 1. Backelite 2. Impregnated varnish 3. Mica 4. Fiber glass 5. Asbestos 

State gaseous and liquid insulating material.

Description : State gaseous and liquid insulating material.

Last Answer : i) Gaseous insulating material : 1. Air 2. Nitrogen 3. Hydrogen 4. SF6 ii) liquid insulating material: 1. Transformer oil 2. Capacitor oil 3. Cable oil 4. Pyranol 5. Savotal 6. Savol 7. Vegetable oil 8. Silicon liquids

State suitable single phase motor for following applications: (i) Table fan (ii) Mixers and Grinders

Description : State suitable single phase motor for following applications: (i) Table fan (ii) Mixers and Grinders

Last Answer : Application Suitable Single Phase Motor Table Fan 1) Capacitor split phase motor 2) Capacitor start capacitor run motor Mixers and Grinders 1) Universal motor 2) A.C. Series motor

State the impact of inductance and resistance on transmission line performance

Description : State the impact of inductance and resistance on transmission line performance

Last Answer : Impact of inductance on transmission line: 1) It causes IXL drop in transmission line which affects regulation. 2) It is the only parameter which decides power transmission capacity of line i. ... is very small, it causes losses, temperature rise& poor voltage regulation so it cannot be neglected

State the needs and benefits of star labelling.

Description : State the needs and benefits of star labelling. 

Last Answer : Needs of star labelling: * Star labelling is meanly required to recognize quality of product * Star labelling is also required to determine life and efficiency of the product. * Star labels ... emission and air pollution will be reduces. 5. Market efficiency and compilation will be improve. 

State the various lighting calculations methods and Describe any one of them.

Description : State the various lighting calculations methods and Describe any one of them.

Last Answer : Lighting calculation methods: 1. Lumens or Light flux method 2. Point to point or Inverse Square law method 3. Watts per Square meter method i) Lumens or Light ... is taken according to the illumination desired on an average value considering overall efficiency of the lighting system.

State the different types of outdoor flood lighting and where are they used.

Description : State the different types of outdoor flood lighting and where are they used.

Last Answer : There are three types of projectors used for flood lighting :  a) Narrow beam Projector b) Medium angle Projector c) Wide angle Projector a) Narrow beam Projectors: - Light beam with such ... yards, stadiums, car parking area etc. 3) It is used for illuminating advertisements, boarding's etc.

State different types of electrical signal and draw all types of waveforms.

Description : State different types of electrical signal and draw all types of waveforms.

Last Answer : Types of electrical signals 1) Sine wave 2) Triangular wave 3) Square wave Waveforms

State any two advantages and two disadvantages of nuclear power plant.

Description : State any two advantages and two disadvantages of nuclear power plant.

Last Answer : Disadvantages of Nuclear Power Plant: -   1. The capital cost of Nuclear power plant is very high as compare to other power plant of same capacity. 2. The erection & ... material could be released into the environment. Causing extensive damage to the mankind,animals and environment.

State the factors to be considered while selecting refrigerants.

Description : State the factors to be considered while selecting refrigerants. 

Last Answer : Selection criteria for refrigerant : 1. Working pressure range and pressure ratio. The pressure required to be maintained in the evaporator and condenser should be low enough to reduce the material ... . It should have moderate density in liquid form, a relatively high density in gaseous form.

State the uses of Industrial water.

Description : State the uses of Industrial water.

Last Answer : Uses of industrial water:  1. In chemical reaction 2. Utility(cooling agent) 3. Steam production 4. Cleaning 5. In cooling tower