The advantage of AC over DC is that (a) it contains more electrical energy (b) it is free from voltage fluctuations (c) it generation costs much less (d) it can be transmitted over long distances with minimum power loss

The advantage of AC over DC is that (a) it contains more electrical energy (b) it is free from voltage fluctuations (c) it generation costs much less (d) it can be transmitted over long distances with minimum power loss
by

1 Answer

Answer :

Ans:(d)
by
selected

Related questions

Electricity is transmitted over long distances – (1) it is fast (2) there is less wastage of energy (3) it is safer (4) it is cheaper

Description : Electricity is transmitted over long distances – (1) it is fast (2) there is less wastage of energy (3) it is safer (4) it is cheaper

Last Answer : (2) there is less wastage of energy Explanation: Long distance means higher wastage of energy. So High volt direct-current (HVDC) technology is used forgreater efficiency in very long distances. ... at high voltages (110 kV or above) to reduce the energy lost in long-distance transmission.

Electricity is transmitted over long distances (1) it is fast (2) there is less wastage of energy (3) it is safer (4) it is cheaper

Description : Electricity is transmitted over long distances (1) it is fast (2) there is less wastage of energy (3) it is safer (4) it is cheaper

Last Answer : there is less wastage of energy

A transformer in an electric circuit serves to ____________. A. generate its own electrical power B. transform electrical energy into mechanical energy C. increase or decrease circuit voltage as required D. convert AC current to DC current

Description : A transformer in an electric circuit serves to ____________. A. generate its own electrical power B. transform electrical energy into mechanical energy C. increase or decrease circuit voltage as required D. convert AC current to DC current

Last Answer : Answer: C

A transformer – (1) converts DC to AC (2) is used to decrease or increase AC voltage (3) converts AC voltage to D.C. voltage (4) converts electrical energy into mechanical energy

Description : A transformer – (1) converts DC to AC (2) is used to decrease or increase AC voltage (3) converts AC voltage to D.C. voltage (4) converts electrical energy into mechanical energy

Last Answer : (2) is used to decrease or increase AC voltage Explanation: Transformers have made longdistance transmission of electric power a practical reality, as AC voltage can be "stepped up" and ... the loads), voltage levels are reduced by transformers for safer operation and less expensive equipment.

A transformer – (1) converts DC to AC (2) is used to decrease or increase AC voltage (3) converts AC voltage to D.C. voltage (4) converts electrical energy into mechanical energy

Description : A transformer – (1) converts DC to AC (2) is used to decrease or increase AC voltage (3) converts AC voltage to D.C. voltage (4) converts electrical energy into mechanical energy

Last Answer : (2) is used to decrease or increase AC voltage Explanation: Transformers have made longdistance transmission of electric power a practical reality, as AC voltage can be "stepped up" and ... the loads), voltage levels are reduced by transformers for safer operation and less expensive equipment.

A transformer (1) converts DC to AC (2) is used to decrease or increase AC voltage (3) converts AC voltage to D.C. voltage (4) converts electrical energy into mechanical energy

Description : A transformer (1) converts DC to AC (2) is used to decrease or increase AC voltage (3) converts AC voltage to D.C. voltage (4) converts electrical energy into mechanical energy

Last Answer : is used to decrease or increase AC voltage

An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. can be started across the line D. offer a more effective means of controlling speed

Description : An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. can be started across the line D. offer a more effective means of controlling speed

Last Answer : Answer: D

An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. offer infinite speed variation D. all of the above

Description : An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. offer infinite speed variation D. all of the above

Last Answer : Answer: C

Wireless Internet is a way to send and receive Internet data over relatively short distances with low-power transmitters. What type of waves are transmitted for wifi?

Description : Wireless Internet is a way to send and receive Internet data over relatively short distances with low-power transmitters. What type of waves are transmitted for wifi?

Last Answer : radio waves

The electrical supply applied to the anodes shown in the illustration is _____________. EL-0090 A. low voltage, high current DC B. low voltage, high current AC C. high voltage, low current DC D. high voltage, low current AC

Description : The electrical supply applied to the anodes shown in the illustration is _____________. EL-0090 A. low voltage, high current DC B. low voltage, high current AC C. high voltage, low current DC D. high voltage, low current AC

Last Answer : Answer: A

Adam's Pool Service charges £50 for swimming pool cleaning performed prior to May 15 and £75 for jobs performed after that date. This pricing structure provides the benefits to Adam's of: A)price leaders. B)smoothing demand fluctuations. C)increasing service tangibility. D)tying prices to service costs.

Description : Adam's Pool Service charges £50 for swimming pool cleaning performed prior to May 15 and £75 for jobs performed after that date. This pricing structure provides the benefits to Adam's of: ... leaders. B)smoothing demand fluctuations. C)increasing service tangibility. D)tying prices to service costs.

Last Answer : B)smoothing demand fluctuations.

15) Adam's Pool Service charges £50 for swimming pool cleaning performed prior to May 15 and £75 for jobs performed after that date. This pricing structure provides the benefits to Adam's of: A)price leaders. B)smoothing demand fluctuations. C)increasing service tangibility. D)tying prices to service costs.

Description : 15) Adam's Pool Service charges £50 for swimming pool cleaning performed prior to May 15 and £75 for jobs performed after that date. This pricing structure provides the benefits to Adam's ... leaders. B)smoothing demand fluctuations. C)increasing service tangibility. D)tying prices to service costs.

Last Answer : B)smoothing demand fluctuations.

The main advantage of AC over DC is:

Description : The main advantage of AC over DC is:  (A) Conversion flexibility from one voltage level to other (B) AC can be easily converted into DC by using a rectifier (C) AC is easy to maintain & can be easily distributed at long distances (D) All of the above

Last Answer : Ac is easy to maintain and ac can be easily converted to dc by rectifier .There is no commutator for conversion in ac that's why ac machines are weight less and more efficiency.ac machines occupy less space than dc .

The power transmitted will be maximum when (a) corona losses are minimum (b) reactance is high (c) sending end voltage is more (d) receiving end voltage is more

Description : The power transmitted will be maximum when (a) corona losses are minimum (b) reactance is high (c) sending end voltage is more (d) receiving end voltage is more

Last Answer : (c) sending end voltage is more

On AC vessels, which of the following statements represents the most difficult problem involved in obtaining a DC potential suitable for use by computer components? A. A stepdown transformer is always required. B. Vessel vibrations affect the voltage source. C. The voltage must be rectified and made ripple free. D. Rectifiers cannot operate with voltage regulators.

Description : On AC vessels, which of the following statements represents the most difficult problem involved in obtaining a DC potential suitable for use by computer components? A. A stepdown transformer is ... voltage must be rectified and made ripple free. D. Rectifiers cannot operate with voltage regulators.

Last Answer : Answer: C

AC supply system compared to DC supply system has the advantage:

Description : AC supply system compared to DC supply system has the advantage:

Last Answer : AC supply system compared to DC supply system has the advantage: low cost of switching

AC and DC generators are similar in that they _____________. A. both generate alternating voltages B. both rectify the voltage before delivery C. are constructed at the same physical size for the same kilowatt rating D. both supply three-phase power

Description : AC and DC generators are similar in that they _____________. A. both generate alternating voltages B. both rectify the voltage before delivery C. are constructed at the same physical size for the same kilowatt rating D. both supply three-phase power

Last Answer : Answer: A

Is the power line voltage available in our homes a dc or an ac voltage?

Description : Is the power line voltage available in our homes a dc or an ac voltage?

Last Answer : The power line voltage available in our homes is AC. Mobile dwellings are the most commonly DC-supplied homes and even then they tend to include AC supply for heavier loads.

______ risk is the potential exchange loss from outstanding obligations as a result of exchange-rate fluctuations. A. Trade B. Exchange C. Finance D. Noncompletion E. Transaction

Description : ______ risk is the potential exchange loss from outstanding obligations as a result of exchange-rate fluctuations. A. Trade B. Exchange C. Finance D. Noncompletion E. Transaction

Last Answer : E. Transaction

A flywheel is used, (A) To store and release energy when required during the work cycle (B) To reduce the power capacity of electric motor (C) To reduce the amplitude of speed fluctuations (D) Any one of above functions

Description : A flywheel is used, (A) To store and release energy when required during the work cycle (B) To reduce the power capacity of electric motor (C) To reduce the amplitude of speed fluctuations (D) Any one of above functions

Last Answer : (D) Any one of above functions

Which of the following are functions of flywheel? a) Store and release energy during work cycle b) Reduce power capacity of the electric motor c) Reduce amplitude of speed fluctuations d) All of the listed

Description : Which of the following are functions of flywheel? a) Store and release energy during work cycle b) Reduce power capacity of the electric motor c) Reduce amplitude of speed fluctuations d) All of the listed

Last Answer : d) All of the listed

Regarding an AC generator connected to the main electrical bus; as the electric load and power factor vary, a corresponding change is reflected in the generator armature reaction. These changes in armature reaction are compensated for by the __________ A. governor speed droop setting B. voltage regulator C. balance coil D. phase-balance relay

Description : Regarding an AC generator connected to the main electrical bus; as the electric load and power factor vary, a corresponding change is reflected in the generator armature reaction. These changes in ... . governor speed droop setting B. voltage regulator C. balance coil D. phase-balance relay

Last Answer : Answer: B

Which exchange-rate system involves a “leaning against the wind” strategy in which short-term fluctuations in exchange rates are reduced without adhering to any particular exchange rate over the long run? A. Pegged or fixed exchange rates B. Adjustable pegged exchange rates C. Managed floating exchange rates D. Freely floating exchange rates

Description : Which exchange-rate system involves a leaning against the wind strategy in which short-term fluctuations in exchange rates are reduced without adhering to any particular exchange rate over the ... pegged exchange rates C. Managed floating exchange rates D. Freely floating exchange rates

Last Answer : C. Managed floating exchange rates

hich exchange-rate system involves a “leaning against the wind” strategy in which short-term fluctuations in exchange rates are reduced without adhering to any particular exchange rate over the long run? A. Pegged or fixed exchange rates B. Adjustable pegged exchange rates C. Managed floating exchange rates D. Freely floating exchange rates

Description : hich exchange-rate system involves a leaning against the wind strategy in which short-term fluctuations in exchange rates are reduced without adhering to any particular exchange rate over ... Adjustable pegged exchange rates C. Managed floating exchange rates D. Freely floating exchange rates

Last Answer : C. Managed floating exchange rates

Scattering losses are caused by the interaction of light with density fluctuations within a fiber. What are the two scattering mechanisms called when the size of the density fluctuations is (a) greater than and (b) less than one-tenth of the operating wavelength?

Description : Scattering losses are caused by the interaction of light with density fluctuations within a fiber. What are the two scattering mechanisms called when the size of the density fluctuations is (a) greater than and (b) less than one-tenth of the operating wavelength?

Last Answer : . (a) Mie scattering; (b) Rayleigh scattering.

What is the minimum recommended absorption coefficient value for AC and DC rotating machines?

Description : What is the minimum recommended absorption coefficient value for AC and DC rotating machines? 

Last Answer : Tips:  a. IR value decreases some what with an increase I applied voltage. However for machines in good condition substantially the same IR is obtained for any test voltage ... a value which after correction for temperature, may be compared with the recommended minimum value of IR. 

What are the minimum recommended PI values for AC and DC rotating machines?

Description : What are the minimum recommended PI values for AC and DC rotating machines? 

Last Answer : Following minimum recommended PI values criteria is to be followed. a. 1.5 for class – A insulation. b. 2.0 for class – B insulation. c. 2.5 for class – F insulation. 

When voltage and current developed in an AC circuit reach their peak values at the same time, the power factor is _____________. A. lagging B. leading C. maximum D. minimum

Description : When voltage and current developed in an AC circuit reach their peak values at the same time, the power factor is _____________. A. lagging B. leading C. maximum D. minimum

Last Answer : Answer: C

The main advantage of using worm gears is a.Low power loss b.High velocity ratio c.Ease of manufacture d.Minimum cost e.All of the above

Description : The main advantage of using worm gears is a.Low power loss b.High velocity ratio c.Ease of manufacture d.Minimum cost e.All of the above

Last Answer : c. Ease of manufacture

A transformer is a device for (a) stepping up (or down) DC voltage (b) generating electricity (c) stepping up (or down) AC voltage (d) converting AC into DC

Description : A transformer is a device for (a) stepping up (or down) DC voltage (b) generating electricity (c) stepping up (or down) AC voltage (d) converting AC into DC

Last Answer : Ans:(c)

If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Description : If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Last Answer : Answer: D

A short in the shunt field of a DC motor is best located by _____________. A. visual inspection of the commutator B. applying AC voltage to each field coil and measuring the voltage drop across each field coil C. using a growler and hacksaw blade D. isolating each coil from the others and using a megohmmeter

Description : A short in the shunt field of a DC motor is best located by _____________. A. visual inspection of the commutator B. applying AC voltage to each field coil and measuring the voltage drop across ... using a growler and hacksaw blade D. isolating each coil from the others and using a megohmmeter

Last Answer : Answer: B

The voltage developed by an AC generator is controlled by varying the ____________. A. speed of the prime mover B. AC excitation to the field C. DC excitation to the field D. DC excitation of the voltage regulator

Description : The voltage developed by an AC generator is controlled by varying the ____________. A. speed of the prime mover B. AC excitation to the field C. DC excitation to the field D. DC excitation of the voltage regulator

Last Answer : Answer: C

The voltage output of an AC generator is accurately controlled by _____________. A. changing the sensitivity of the prime mover to large changes in voltage B. varying the reluctance of the air gap C. varying the DC exciter voltage D. shorting out part of the armature windings

Description : The voltage output of an AC generator is accurately controlled by _____________. A. changing the sensitivity of the prime mover to large changes in voltage B. varying the reluctance of the air gap C. varying the DC exciter voltage D. shorting out part of the armature windings

Last Answer : Answer: C

The most common source of excitation for synchronous motors is a/an _____________. A. low voltage battery B. motor attenuator set C. DC exciter generator D. AC supply

Description : The most common source of excitation for synchronous motors is a/an _____________. A. low voltage battery B. motor attenuator set C. DC exciter generator D. AC supply

Last Answer : Answer: C

The output voltage of a three-phase alternator is regulated by the _____________. A. AC voltage to the armature B. AC voltage to the field C. DC voltage to the armature D. DC voltage to the field

Description : The output voltage of a three-phase alternator is regulated by the _____________. A. AC voltage to the armature B. AC voltage to the field C. DC voltage to the armature D. DC voltage to the field

Last Answer : Answer: D

When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only and a low resistance meter for DC measurements C. whenever a low impedance meter is not available, regardless of the components being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

An electronic device used to convert AC voltage into DC voltage is called?

Description : An electronic device used to convert AC voltage into DC voltage is called?

Last Answer : Rectifier

Why does using ac vice dc bias voltage result in a stronger output signal?

Description : Why does using ac vice dc bias voltage result in a stronger output signal?

Last Answer : Because an ac bias voltage of the proper frequency and level places the input signal away from both steps in the magnetism curve. The result is two undistorted output signals that are combined into one strong output.

What are three advantages of adding an ac bias voltage to the input signal instead of adding a fixed dc bias voltage?

Description : What are three advantages of adding an ac bias voltage to the input signal instead of adding a fixed dc bias voltage?

Last Answer : a. Reproduces a stronger output signal. b. Greatly improves the SNR. c. Greatly reduces the natural tape hiss.

Why does adding dc vice ac bias voltage to the input signal result in a poor signal-to-noise ratio (SNR)?

Description : Why does adding dc vice ac bias voltage to the input signal result in a poor signal-to-noise ratio (SNR)?

Last Answer : With dc bias, the SNR is poor because only a small portion of the magnetism curve is straight enough to use, thus the output signal is weak compared with the natural tape hiss.

What component causes a generator to produce dc voltage rather than ac voltage at its output terminals?

Description : What component causes a generator to produce dc voltage rather than ac voltage at its output terminals?

Last Answer : A commutator

The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Description : The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Last Answer : a) A pulsating uni-directional current

In a simple dc circuit, voltage equals resistance multiplied by current. This is also considered true in an AC circuit if the what values of the current and voltage are used.

Description : In a simple dc circuit, voltage equals resistance multiplied by current. This is also considered true in an AC circuit if the what values of the current and voltage are used.

Last Answer : ANSWER: ROOT MEAN SQUARE (RMS) VALUES

An AC supply of 230 V is applied to half wave rectifier circuit. A transformer turns ratio is 20 : 1. Find i) Output DC voltage (ii) Peak Inverse Voltage (PIV)

Description : An AC supply of 230 V is applied to half wave rectifier circuit. A transformer turns ratio is 20 : 1. Find i) Output DC voltage (ii) Peak Inverse Voltage (PIV)

Last Answer : Solution:

An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic

Description : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Last Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

In order to reduce the harmful effects of harmonics on the AC side of a high voltage DC transmission system...

Description : In order to reduce the harmful effects of harmonics on the AC side of a high voltage DC transmission system_____ are provided. (A) synchronous condensers (B) shunt capacitors (C) shunt filters (D) static compensators

Last Answer : In order to reduce the harmful effects of harmonics on the AC side of a high voltage DC transmission system shunt filters are provided.