What manufacturing processes were applied to SS Forged Fittings?

What manufacturing processes were applied to SS Forged Fittings?
by

1 Answer

Answer :

There are four processes of manufacturing a SS forged fittings. First is Mandrel method, as the name suggests a curved mandrel is inserted into a length of pipe. Extrusion Method consists of a machine that has the mould of the fitting into which the pipe inserted and come out in the shape of a fittings.Next is the UO method in which a piece of sheet is cut out and then it is pressed on an anvil that has the inverted shape of a fittings. Hot Forming Method is somewhat similar to Extrusion Method, here a piece of pipe goes through a mould of the fittings and come out in the needed shape.
by
selected by

Related questions

How are Forged Pipe Fittings Made?

Description : How are Forged Pipe Fittings Made?

Last Answer : Pipe Fittings are Plumbing materials that support the course of flow in Adjustments such as elbows, tees. Changes the size of the tubing, for instance reducers, raising tees. Link different components ... fittings (Socket Weld and Threaded) are created in compliance with the standards of ASME (Am

I have been on SSDI for 15 years and am 65 years old. My wife just turn 62 years old and applied for SS.Does she get a part of SSDI or my life earnings?

Description : I have been on SSDI for 15 years and am 65 years old. My wife just turn 62 years old and applied for SS.Does she get a part of SSDI or my life earnings?

Last Answer : I don't think so, if she is not disabled. Has your wife worked all these years? If so she would draw off of her own benefit. You need to call your local social security office and ask them ... apply for any S.S. benefit but you will forfeit around 30% by taking it earlier than full retirement age.

Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Description : Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Last Answer : b.Subtractive manufacturing

Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting

Description : Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting

Last Answer : (A) Sintering

Which of the following information systems focuses on making manufacturing processes more efficient and of higher quality? a) Computer aided manufacturing b) Computer integrated manufacturing c) Computer aided software engineering d) Computer aided system engineering e) None of these

Description : Which of the following information systems focuses on making manufacturing processes more efficient and of higher quality? a) Computer aided manufacturing b) Computer integrated manufacturing c) Computer aided software engineering d) Computer aided system engineering e) None of these

Last Answer : a) Computer aided manufacturing

Which of the manufacturing processes is/are required to make a typical stainless steel spoon out of sheet metal? A. Casting B. Forming C. Brazing D. Blow moulding

Description : Which of the manufacturing processes is/are required to make a typical stainless steel spoon out of sheet metal? A. Casting B. Forming C. Brazing D. Blow moulding

Last Answer : Forming

Classify various Manufacturing Processes.

Description : Classify various Manufacturing Processes. 

Last Answer : The Four main types of Manufacturing Processes are (1) Casting & Molding, (2) Machining, (3) Joining & Shearing and (4) Forming.

Have you ever forged a doctor's note for your employer?

Description : Have you ever forged a doctor's note for your employer?

Last Answer : Forged as in how?

Can smart cards be forged, copied, or altered?

Description : Can smart cards be forged, copied, or altered?

Last Answer : answer:They are probably better than much of what is around now, but no doubt once they are in use, sophisticated thieves will begint rying to break them. Basically, their claims to security ... privacy in a single sign-on system that uses fingerprint biometrics as the single sign-on credential.

My first is in wield, sever bones and marrow. My second is in blade, forged in cold steel. My third is in arbalest, and also in arrows. My fourth is in power, plunged through a shield. My fifth is in honour, and also in vows My last will put an end to it all.What am I? -Riddles

Description : My first is in wield, sever bones and marrow. My second is in blade, forged in cold steel. My third is in arbalest, and also in arrows. My fourth is in power, plunged through a shield. My fifth is in honour, and also in vows My last will put an end to it all.What am I? -Riddles

Last Answer : A weapon!

With which software is the certificate forged ?

Description : With which software is the certificate forged ?

Last Answer : Fake certificates can be created with Adobe Photoshop.

IF a signature is forged on a contract for a car is it void and if so what happens to the car?

Description : IF a signature is forged on a contract for a car is it void and if so what happens to the car?

Last Answer : A forged signature on a contract for a car is considered fraud, you should contact an attorney for this situation.

Does the Edelbrock E-Force Supercharger Kit 15541 require forged internals?

Description : Does the Edelbrock E-Force Supercharger Kit 15541 require forged internals?

Last Answer : The Edelbrock E-Force supercharger does require forged internals if you want your engine to last for a long time.

What is the difference between high carbon and forged cutlery?

Description : What is the difference between high carbon and forged cutlery?

Last Answer : High carbon knives are made so that they are strong but very flexible whereas forged cutlery is a knife made from one solid piece of metal that is hammered into shape allowing the weight of the ... strength and resilience than high carbon cutlery because of the process in which the blades are made.

Forged documents are detected by – (1) ultraviolet rays (2) infra-red rays (3) beta rays (4) gamma rays

Description : Forged documents are detected by – (1) ultraviolet rays (2) infra-red rays (3) beta rays (4) gamma rays

Last Answer : (1) ultraviolet rays Explanation: Old postcards, books, signs, photos and other paper products made before the late 1930s rarely glow under a black light. Chemical bleaches and dyes used ... light. Knowing this helps to detect forged documents and distinguish reproductions in all types of ephemera.

Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Description : Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Last Answer : (B) Lead

Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability to be cast, rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Last Answer : (A) High strength to weight ratio

Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Description : Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Last Answer : (B) Wrought iron cannot be easily forged and welded

The certificates which are found as forged for being admitted in the college could be described as valuable security a) Mahinder choudhary v. state of Andrapradesh b) Keshav barathi v. state of maharashtra c) Kansaheb Kalu Patil v. state of maharashtra d) None of these

Description : The certificates which are found as forged for being admitted in the college could  be described as valuable security a) Mahinder choudhary v. state of Andrapradesh b) Keshav barathi v. state of maharashtra c) Kansaheb Kalu Patil v. state of maharashtra d) None of these

Last Answer : c) Kansaheb Kalu Patil v. state of maharashtra

Cold chisel’s hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel

Description : Cold chisel’s hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel

Last Answer : (B) High carbon steel

Cold chisel & hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel

Description : Cold chisel & hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel

Last Answer : (B) High carbon steel

.The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel

Description : .The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel

Last Answer : D. Soft Centre steel

The landside of a mould board plough is made of: a) Malleable iron b) Forged steel c) C45 steel d) Soft centre steel

Description : The landside of a mould board plough is made of: a) Malleable iron b) Forged steel c) C45 steel d) Soft centre steel

Last Answer : d) Soft centre steel

What is trimming? Why it is necessary for forged parts?

Description : What is trimming? Why it is necessary for forged parts?

Last Answer : Trimming: Trimming is the process of removing the flash around the edges of the finished forging in a separate press by trimmer dies. Trimming basically presses a part through a cutting die that runs ... the geometric accuracy 3. To obtain the surface finish 4. To obtain the good appearance 

List out any four characteristics of forged parts

Description : List out any four characteristics of forged parts 

Last Answer : 1) Forging produces predictable and uniform grain size and flow characteristics and has directional toughness. 2) Proper orientation of grains ensures the fatigue resistance and maximum impact strength. 3) Grain ... The forged parts have higher density. 6) The strength to weight ratio is high. 

State different methods by which forged components can be made.

Description : State different methods by which forged components can be made. 

Last Answer : Answer: Different types of forging method - I. Open die forging: a) Hand forging b) Power forging: i. Hammer forging ii. Press forging II. Close die forging: a) Drop forging b) Press forging c) Machine forging OR

Forged documents are detected by (1) ultraviolet rays (2) infra-red rays (3) beta rays (4) gamma rays

Description : Forged documents are detected by (1) ultraviolet rays (2) infra-red rays (3) beta rays (4) gamma rays

Last Answer : ultraviolet rays

Where are the grease fittings for 2011 ford escape?

Description : Where are the grease fittings for 2011 ford escape?

Last Answer : Feel Free to Answer

What is the application and use of a range of electrical components Such as plugs switches sockets lighting and fittings junction boxes consumer units.?

Description : What is the application and use of a range of electrical components Such as plugs switches sockets lighting and fittings junction boxes consumer units.?

Last Answer : Need answer

Is there a difference between gray and white PVC piping and fittings?

Description : Is there a difference between gray and white PVC piping and fittings?

Last Answer : The only difference between gray and white PVC piping is in the color. They're both PVC.

PVC Fittings?

Description : PVC Fittings?

Last Answer : form_title= PVC Fittings form_header= Make DIY a snap with PVC fittings. How many fittings do you need?*= {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, More than 10} What size PVC do you need?*= _ [50] What will you be using the PVC for?*= _ [50]

What is Instrumentation Fittings?

Description : What is Instrumentation Fittings?

Last Answer : Instrumentation FittingsTube FittingsThere are four primary styles of high to low pressure tube fittings. They are differentiated by their end connections and applications, each having its own advantages and ... most pressure applications (up to 15,000 PSI) fitting sizes are specified by the

What are the types of Pipe fittings?

Description : What are the types of Pipe fittings?

Last Answer : Pipe Fittings are Piping component that helps in Changes the direction of the flow such as elbows, tees. Changes the size of the pipe such as reducers, reducing tees. Connect different components such ... Thredolet, Nipolet, Letrolet, Swepolet), Steam Traps, Long Radius Bend, Flanges and Valve etc.

What are some brand names for bathroom fittings?

Description : What are some brand names for bathroom fittings?

Last Answer : Neat and Clean bathrooms with Modern bath fittings and design play a wonderful role in rendering pleasant and sumptuous bathing feel on relaxed weekends and hectic mornings. Various types of bathroom ... , your bathroom can be functional and beautiful in equal measure.some of the important bath

What types of lighting fittings are used in the battery room?

Description : What types of lighting fittings are used in the battery room?

Last Answer : Flame proof acid resistant  

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Description : Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Description : Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Last Answer : (D) All the above

Cost of fittings and their fixing is specified for the following sanitary fittings (A) Water closets (B) Flushing pipes (C) Lavatory basins (D) All the above

Description : Cost of fittings and their fixing is specified for the following sanitary fittings (A) Water closets (B) Flushing pipes (C) Lavatory basins (D) All the above

Last Answer : (D) All the above

What Are The Different Types Of Tools Used In Pipe Fittings?

Description : What Are The Different Types Of Tools Used In Pipe Fittings?

Last Answer : Generally tools used in pipe fittings are Pipe vice, Pipe wrench, Pipe die, Pipe tap, Chain wrench, Chisel, Hammer, Reamer and Pipe cutter.

What is the required duration of hydrotest for fittings NPS 10’’ and larger? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minutes.

Description : What is the required duration of hydrotest for fittings NPS 10’’ and larger? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minutes.

Last Answer : c) 3 minutes.

What is the required duration of hydrotest for fittings NPS 2½ “thru 8"? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minute

Description : What is the required duration of hydrotest for fittings NPS 2½ “thru 8"? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minute

Last Answer : b) 2 minutes.

Which of the following is required to be hydrostatically tested per ASME B31.3? a) Flanges. b) Flanged fittings. c) Flanges and flanged fittings. d) There is no hydrostatic testing requirement in ASME B16.5.

Description : Which of the following is required to be hydrostatically tested per ASME B31.3? a) Flanges. b) Flanged fittings. c) Flanges and flanged fittings. d) There is no hydrostatic testing requirement in ASME B16.5.

Last Answer : b) Flanged fittings.

Is it permissible to install tapped holes in fittings per ASME B16.5 a) No. b) Yes. c) Yes, if the metal is thick enough to allow the required thread length. d) Yes, as permitted by ASME B16.20.

Description : Is it permissible to install tapped holes in fittings per ASME B16.5 a) No. b) Yes. c) Yes, if the metal is thick enough to allow the required thread length. d) Yes, as permitted by ASME B16.20.

Last Answer : c) Yes, if the metal is thick enough to allow the required thread length.

Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Description : Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Last Answer : d) All of the above.

How are reducing fittings designated in size? a) By the smaller size. b) By the larger size. c) By sizes. d) They are not designated by size, just class.

Description : How are reducing fittings designated in size? a) By the smaller size. b) By the larger size. c) By sizes. d) They are not designated by size, just class.

Last Answer : c) By sizes.

When flanges and flanged fittings meet the requirements for multiple materials and are marked for multiple materials and are marked in accordance with ASME B16.5, which of the following pressure rating may be used? e) Any applicable pressure rating. f) The lowest must be used. g) The highest must be used. h) Flanges may only meet one material specification.

Description : When flanges and flanged fittings meet the requirements for multiple materials and are marked for multiple materials and are marked in accordance with ASME B16.5, which of the following pressure rating may be ... . g) The highest must be used. h) Flanges may only meet one material specification.

Last Answer : e) Any applicable pressure rating.

What pressure does ASME B16.5 limit flanged fittings to during system hydrostatic testing? a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class. c) The maximum pressure rating for the flange. d) The flange class plus 250psi.

Description : What pressure does ASME B16.5 limit flanged fittings to during system hydrostatic testing? a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class. c) The maximum pressure rating for the flange. d) The flange class plus 250psi.

Last Answer : a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class.

When flanged fittings are to be used at temperatures below -20°F, what pressure rating is to be used? a) The pressure rating at the actual service temperature, found by interpretation. b) The pressure rating at -20°F. c) The pressure equal to the flange class. d) Flanges complying with ASME B16.5 may not be used below -20°F.

Description : When flanged fittings are to be used at temperatures below -20°F, what pressure rating is to be used? a) The pressure rating at the actual service temperature, found by interpretation. b) The pressure ... to the flange class. d) Flanges complying with ASME B16.5 may not be used below -20°F.

Last Answer : b) The pressure rating at -20°F.