Should a bread knife ideally be serrated?

Should a bread knife ideally be serrated?
by

1 Answer

Answer :

Most bread knives usually come serrated, wether that knife be bought in a set, or by itself. Serrated knives are by far the best for cutting bread.
by

Related questions

It is a mower with a knife made of several serrated triangular sections that reciprocate against stationary fingers. a. Rotary mower c. Cylinder mower. d. None of above

Description : It is a mower with a knife made of several serrated triangular sections that reciprocate against stationary fingers. a. Rotary mower c. Cylinder mower. d. None of above

Last Answer : Ans-   b. Reciprocating mower  

What does it matter if we touched the bread when every one is using the same knife to cut it?

Description : What does it matter if we touched the bread when every one is using the same knife to cut it?

Last Answer : People don’t think that far ahead. The assumption is that hands will never touch the surfaces of the areas on the utensils which contact the bread.

How do I clean rust off of a bread knife?

Description : How do I clean rust off of a bread knife?

Last Answer : Use vinegar to clean the rust, leave the blade in the vinegar (the normal one, not big deal) overnight, in the morning wash it with a lil of baking soda, or if this doesn't work (when theres a ... followed by rubbing it with a slice of onion, rinse well with hot water and dry it with a soft cloth.

What are some other uses for the global bread knife?

Description : What are some other uses for the global bread knife?

Last Answer : Global bread knives can be used for a variety of slicing tasks. They are perfect for using on any type of baked goods such as cakes, loaves or muffins.

Does an electric bread knife cut through meat as well?

Description : Does an electric bread knife cut through meat as well?

Last Answer : A bread knife is made to cut through bread, not through meat. This means it will not cut well through meat because the texture is different and much more tough.

What type of knife is best for slicing bread?

Description : What type of knife is best for slicing bread?

Last Answer : A bread slicing knife works the best. Several other knives work for this task as well. However, using a bread slicing knife gives you the the most even bread slices.

How can I resharpen serrated steak knives?

Description : How can I resharpen serrated steak knives?

Last Answer : I have a wet-stone motor driven sharpener. I clean up the flat side, behind the serrations. The combination of a sharpen edge with serrations makes the knife very sharp. It was so sharp that I cut my wrist and still have the scar.

A list of 20 plants with Serrated leaves

Description : A list of 20 plants with Serrated leaves

Last Answer : Need Answer

What do you use serrated cooking knives for Meat or vegetables?

Description : What do you use serrated cooking knives for Meat or vegetables?

Last Answer : You would not need a serrated knife for either, unless your are planning to use a steak knife to cut a cooked meat product. If you buy brand new cooking knife it will cut both meat and vegetables, the only reason you would need a serrated knife would be for cutting bread.

Do serrated knives stay sharp longer?

Description : Do serrated knives stay sharp longer?

Last Answer : Yes, they do stay sharp longer. The points on the knife will dull out before the actual edge of the blade. As with all knives however, misuse will cause rapid dulling.

The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2. Spike tooth and wire loop type 3. Spike tooth and hammer mill 4. hammer mill and flails

Description : The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2. Spike tooth and wire loop type 3. Spike tooth and hammer mill 4. hammer mill and flails

Last Answer : ans 3

The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Description : The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Last Answer : ans 2

Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type c) Spike tooth d) Hammer mill

Description : Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type c) Spike tooth d) Hammer mill

Last Answer : a) Raspbar type cylinder

The two types of cylinder used on power wheat threshers are: a) Serrated disc and rasp bar b) Spike tooth and wire loop type c) Spike tooth and hammer mill d) Hammer mill and flails

Description : The two types of cylinder used on power wheat threshers are: a) Serrated disc and rasp bar b) Spike tooth and wire loop type c) Spike tooth and hammer mill d) Hammer mill and flails

Last Answer : c) Spike tooth and hammer mill

Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type cylinder c) Spike tooth d) Hammer mill

Description : Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type cylinder c) Spike tooth d) Hammer mill

Last Answer : a) Raspbar type cylinder

Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Description : Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Last Answer : a. Spur wheel

Which of the following is not one of the three broad types of channel pattern? (A) Straight (B) Serrated (C) Braided (D) Meandering

Description : Which of the following is not one of the three broad types of channel pattern? (A) Straight (B) Serrated (C) Braided (D) Meandering

Last Answer : (B) Serrated 

Ideally what is your time worth?

Description : Ideally what is your time worth?

Last Answer : I would like to think that I’m worth more than minimum wage, but I am clueless in what my skills would be worth and what skills have are marketable?

Which profession would you have ideally chosen for yourself if you hadn't taken money as a factor?

Description : Which profession would you have ideally chosen for yourself if you hadn't taken money as a factor?

Last Answer : Writer and/or editor. I’m lucky, though, and get to do a lot of writing and editing in my ‘day job’. I’m happy with that. :)

Does a translator ideally have perfect pitch?

Description : Does a translator ideally have perfect pitch?

Last Answer : I don’t think being a translator has quite the same requirements of being a Cantor. Billions of people throughout the world speak tonal languages without having perfect pitch.

Do any doctors on here feel like insurance companies cause you to not practice medicine how you ideally want to?

Description : Do any doctors on here feel like insurance companies cause you to not practice medicine how you ideally want to?

Last Answer : I know a psychologist who originally started her practice not taking insurance, because she didn't want to have to deal with the constraints. After about two years, she started taking insurance, because she ... within. Her practice is now thriving, and she doesn't seem to regret the decision at all.

Recommendations for simple (ideally free) photo-editing software?

Description : Recommendations for simple (ideally free) photo-editing software?

Last Answer : Oh…..and I’m running Leopard on a MacBook Pro…

The sugar industry is ideally suited for the cooperative sector. Why? -Geography

Description : The sugar industry is ideally suited for the cooperative sector. Why? -Geography

Last Answer : Sugarcane cultivation is seasonal hence the production too is seasonal. The farmers are engaged in the cultivation of the sugarcane, and when it is reaped, a cluster of farmers set up a ... together. Hence it is a cooperative sector. The cooperative formation has been successful in Maharashtra.

James ordered a fishing rod, priced at $3.56. Unfortunately, James is an Eskimo who lives in a very remote part of Greenland and the import rules there forbid any package longer than 4 feet to be imported. The fishing rod was 4 feet and 1 inch, just a little too long, so how can the fishing rod be mailed to James without breaking the rules? Ideally James would like the fishing rod to arrive in one piece! -Riddles

Description : James ordered a fishing rod, priced at $3.56. Unfortunately, James is an Eskimo who lives in a very remote part of Greenland and the import rules there forbid any package longer than 4 feet to ... without breaking the rules? Ideally James would like the fishing rod to arrive in one piece! -Riddles

Last Answer : Insert the fishing rod into a box which measures 4 feet on all sides, the fishing rod will fit within the diagonal of the box with room to spare.

Which industry, due to its seasonal nature, is ideally suited to the cooperative sector? -SST 10th

Description : Which industry, due to its seasonal nature, is ideally suited to the cooperative sector? -SST 10th

Last Answer : This answer was deleted by our moderators...

Why is sugar industry ideally suited to the cooperative sector? -SST 10th

Description : Why is sugar industry ideally suited to the cooperative sector? -SST 10th

Last Answer : (i) The sugar industry is seasonal in nature and so is ideally suited to the cooperative sector. (ii) For entire year the farmers are engaged in producing sugarcane as it is an annual ... nature of the sugar industry is combated by setting up cooperative where farmers share the profits and losses.

What breasts are ideally big?

Description : What should a girl 175 cm tall 70 kg? Twos, threes, fours?

Last Answer : And if they weren't ideal, would you get some silicone in them? Or do you have them cut? Nina, don't be silly! (giggle) And if you had them perfect, you might be so annoying that everyone would be afraid of you. Really, don't be silly!

Number of WBCs per `mm^(3)` of human blood is ideally

Description : Number of WBCs per `mm^(3)` of human blood is ideally

Last Answer : Number of WBCs per `mm^(3)` of human blood is ideally A. 8000 B. 4000 C. 3000 D. 16000

What according to you, Mrs. Adis should have ideally done? Explain your answer.

Description : What according to you, Mrs. Adis should have ideally done? Explain your answer.

Last Answer : What according to you, Mrs. Adis should have ideally done? Explain your answer.

Oxygen percentage in the flue gas coming out of a gaseous fuel fired furnace should be ideally about __________ percent. (A) < 2 (B) < 5 (C) < 8 (D) < 10

Description : Oxygen percentage in the flue gas coming out of a gaseous fuel fired furnace should be ideally about __________ percent. (A) < 2 (B) < 5 (C) < 8 (D) < 10

Last Answer : (A) < 2

Flue gas outlet temperature from the chimney of any furnace should be ideally about __________ °C. (A) 50 (B) 100 (C) 150

Description : Flue gas outlet temperature from the chimney of any furnace should be ideally about __________ °C. (A) 50 (B) 100 (C) 150

Last Answer : (C) 150

For ideally incompressible fluid, the Mach number will be(A) 1.5 (B) 1 (C) 0 (D) 5

Description : For ideally incompressible fluid, the Mach number will be (A) 1.5 (B) 1 (C) 0 (D) 5

Last Answer : (B) 1

Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Description : Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Last Answer : (A) Vane

At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm.) and the gas behaves ideally.) (A) μ° + RT ln f (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Description : At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm. ... (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Last Answer : (A) μ° + RT ln f

Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) Solders generally melt at less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Description : Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) ... less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Last Answer : Option B

State where are the stomata ideally located. Are they cellular structures?

Description : State where are the stomata ideally located. Are they cellular structures?

Last Answer : Answer. Stomata are minute pores found on the surface of leaf. Yes they are cellular structures.

Boiler water pH refers to a quantitative figure that expresses the acidity or alkalinity of boiler water. Ideally it should be between • 8.5 to 9.5 • 7.5 to 8.5 • 9.5 to 10.5

Description : Boiler water pH refers to a quantitative figure that expresses the acidity or alkalinity of boiler water. Ideally it should be between • 8.5 to 9.5 • 7.5 to 8.5 • 9.5 to 10.5

Last Answer : • 8.5 to 9.5

A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is the partial pressure of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Description : A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is ... of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Last Answer : 84.6

Ideally, an oscilloscope presentation should cover what vertical portion of the screen?

Description : Ideally, an oscilloscope presentation should cover what vertical portion of the screen?

Last Answer : At least 60% of the vertical trace.

Communication in an organization should ideally flow (a) From top to bottom (b) from bottom to top (c) Both ways (d) None of these

Description : Communication in an organization should ideally flow (a) From top to bottom (b) from bottom to top (c) Both ways (d) None of these

Last Answer : (c) Both ways

Ideally, the research participant's identity is not known to the researcher. This is called: a. Anonymity b. Confidentiality c. Deception d. Desensitizing

Description : Ideally, the research participant's identity is not known to the researcher. This is called: a. Anonymity b. Confidentiality c. Deception d. Desensitizing

Last Answer : a. Anonymity

Land plane is ideally suited for a) Land levelling b) Earth moving c) Final grading d) Top finishing

Description : Land plane is ideally suited for a) Land levelling b) Earth moving c) Final grading d) Top finishing

Last Answer : d) Top finishing

Land plane is ideally suited for: a. Land leveling b. Earth moving c. Final grading d. Top finishing

Description : Land plane is ideally suited for: a. Land leveling b. Earth moving c. Final grading d. Top finishing

Last Answer : d. Top finishing

Project management is ideally suited for a business environment requiring all of the following except _________. A. Flexibility B. Innovation C. speed D. Repetability

Description : Project management is ideally suited for a business environment requiring all of the following except _________. A. Flexibility B. Innovation C. speed D. Repetability

Last Answer : A. Flexibility

Division operation is ideally suited to handle queries of the type : (A) customers who have no account in any of the branches in Delhi. (B) customers who have an account at all branches in Delhi. (C) customers who have an account in atleast one branch in Delhi. (D) customers who have only joint account in any one branch in Delhi

Description : Division operation is ideally suited to handle queries of the type : (A) customers who have no account in any of the branches in Delhi. (B) customers who have an account at all branches in Delhi. ( ... atleast one branch in Delhi. (D) customers who have only joint account in any one branch in Delhi

Last Answer : (B) customers who have an account at all branches in Delhi. 

Ideally, the damping torque should be

Description : Ideally, the damping torque should be  (1) Proportional to velocity of the moving system and operating current.  (2) Proportional to the velocity of the moving system but independent of operating ... operating current.  (4) Independent of the velocity of the moving system and operating current.

Last Answer : Ideally, the damping torque should be Proportional to the velocity of the moving system but independent of operating current. 

The internal resistance of the ammeter should ideally be

Last Answer : The internal resistance of the ammeter should ideally be Zero.

What is the minimum age, in your opinion, to start teaching a child lethal knife fighting for self defence?

Description : What is the minimum age, in your opinion, to start teaching a child lethal knife fighting for self defence?

Last Answer : I agree, 5. The best knife depends on the common weapons of the other children, and the cultural responses to violence. My choice in my circumstances was the pencil.

What age would a child have to be for you to let them use a sharp knife?

Description : What age would a child have to be for you to let them use a sharp knife?

Last Answer : 8–10.

What would you think/do when you find your roommate/partner is sharpening a knife?

Description : What would you think/do when you find your roommate/partner is sharpening a knife?

Last Answer : My first action would be to gently determine whether they are awake, or experiencing RLS/REM sleep. If they are sleepwalking, I would vacate the premises quick. No telling where a dream could take a turn. If they are awake, I would ask if it was a good time to bring out the brick cheese.