In order to make a phase change from liquid to gas you must add energy equal to the what of vaporization?

In order to make a phase change from liquid to gas you must add energy equal to the what of vaporization?
by

1 Answer

Answer :

Need answer
by

Related questions

The change of a gas to a liquid is called: w) vaporization x) sublimation y) condensation z) freezing

Description : The change of a gas to a liquid is called: w) vaporization x) sublimation y) condensation z) freezing

Last Answer : ANSWER: Y -- CONDENSATION

The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Description : The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Last Answer : ANSWER: X -- HEAT OF VAPORIZATION

What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Description : What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Last Answer : Latent heat

The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Last Answer : Latent Heat of Vaporization

The process of breaking up or liquid into fine droplets by spraying is A. vaporization B. atomization C. condensation D. evaporation

Description : The process of breaking up or liquid into fine droplets by spraying is A. vaporization B. atomization C. condensation D. evaporation

Last Answer : ANSWER : B

The process of breaking up a liquid into fine droplets by spraying is called a. vaporization b. carburetion c. injection d. atomization

Description : The process of breaking up a liquid into fine droplets by spraying is called a. vaporization b. carburetion c. injection d. atomization

Last Answer : ANSWER d. atomization

Vapour lock is a. complete or partial stoppage of fuel supply due to vaporization of the fuel b. locking of carburetor due to high vapor pressure c. excess fuel supply to the engine d. supply of liquid fuel to the engine

Description : Vapour lock is a. complete or partial stoppage of fuel supply due to vaporization of the fuel b. locking of carburetor due to high vapor pressure c. excess fuel supply to the engine d. supply of liquid fuel to the engine

Last Answer : ANSWER a. complete or partial stoppage of fuel supply due to vaporization of the fuel

The changing of solid directly to vapor without passing through liquid state is called  a. Evaporation  b. Vaporization  c. Sublimation  d. Condensation

Description : The changing of solid directly to vapor without passing through liquid state is called  a. Evaporation  b. Vaporization  c. Sublimation  d. Condensation

Last Answer : Sublimation

What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Description : What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Last Answer : Sublimation

In single-phase alternators, in order for the voltages induced in all the armature windings to add together for a single output, how must the windings be connected?

Description : In single-phase alternators, in order for the voltages induced in all the armature windings to add together for a single output, how must the windings be connected?

Last Answer : In series.

Is the energy of the molecules increase or decrease in the state of vaporization?

Description : Is the energy of the molecules increase or decrease in the state of vaporization?

Last Answer : Energy of the molecules increase in the state ofvaporization.

The energy required to melt one mole of a solid at its melting point is called one of the following. w) the molar heat of fusion x) the molar hear of vaporization y) the molar heat of capacity z) the melting point

Description : The energy required to melt one mole of a solid at its melting point is called one of the following. w) the molar heat of fusion x) the molar hear of vaporization y) the molar heat of capacity z) the melting point

Last Answer : ANSWER: W -- THE MOLAR HEAT OF FUSION

Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Description : Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Last Answer : (D) A counter diffusion at an almost equal molar rate

Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Description : Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Last Answer : (C) No change

Question regarding the difference in vaporization of two like compounds.

Description : Question regarding the difference in vaporization of two like compounds.

Last Answer : answer:If you had asked me which one would leave a residue, I would've intuitively gone with your answer and said A. Given the results you have found though, the answer must lie in their ability ... so combustion would be incomplete. I hope that helps. Its been a long time since I studied chemistry.

For vaporization of water at 1 atmospheric pressure the values of `DeltaH` and `DeltaS` are `40.63KJmol^(-1)` and `108JK^(-1)mol^(-1)` , respectively.

Description : For vaporization of water at 1 atmospheric pressure the values of `DeltaH` and `DeltaS` are `40.63KJmol^(-1)` and `108JK^(-1)mol^(-1)` , respectively.

Last Answer : For vaporization of water at 1 atmospheric pressure the values of `DeltaH` and `DeltaS` are `40.63KJmol^(-1)` and ` ... 373.4 K C. 293.4 K D. 273.4 K

What does the latent heat of vaporization represents?

Description : What does the latent heat of vaporization represents?

Last Answer : The amount of energy required to turn a mole of a liquid into agas

What is the difference between water's high heat capacity and high heat of vaporization?

Description : What is the difference between water's high heat capacity and high heat of vaporization?

Last Answer : Water heat of vaporization at 100 oC: 2030 kJ/kg.Water specific heat at 15 oC: 4,187 kJ/kg.K.

What does the latent heat of vaporization represents?

Description : What does the latent heat of vaporization represents?

Last Answer : The amount of energy required to turn a mole of a liquid into agas

What does the heat latent heat of vaporization measure?

Description : What does the heat latent heat of vaporization measure?

Last Answer : The energy required to boil a substance

At lower temperatures and pressures, the latent heat of vaporization of a refrigerant (a) decreases (b) increases (c) remains same (d) depends on other factors

Description : At lower temperatures and pressures, the latent heat of vaporization of a refrigerant (a) decreases (b) increases (c) remains same (d) depends on other factors

Last Answer : Ans: b

What is the temperature at which the water vapour in the mixture of water vapour in air, starts condensing called? A. condensation temperature B. dew point temperature C. vaporization temperature D. all of the above

Description : What is the temperature at which the water vapour in the mixture of water vapour in air, starts condensing called? A. condensation temperature B. dew point temperature C. vaporization temperature D. all of the above

Last Answer : ANSWER : B

Alcohols alone cannot be used in CI engines as a) their self ignition temperature is high b) latent heat of vaporization is high c) all of the mentioned d) none of the mentioned

Description : Alcohols alone cannot be used in CI engines as a) their self ignition temperature is high b) latent heat of vaporization is high c) all of the mentioned d) none of the mentioned

Last Answer : Answer: c Explanation: None.

Condensation is the reverse of – (1) Vaporization (2) Smog (3) Cirrus cloud (4) Fog

Description : Condensation is the reverse of – (1) Vaporization (2) Smog (3) Cirrus cloud (4) Fog

Last Answer : (1) Vaporization Explanation: Condensation is the change of physical state of matter from gaseous phase into liquid phase and is the reverse of vaporization. When the relative humidity reaches 100 per cent, the air is completely saturated. The air temperature is said to be as dew-point.

Vegetables are cooked in lesser time by adding a pinch of salt while cooking because (1) boiling point of water increases (2) latent heat of vaporization of water decreases (3) latent heat of vaporization of water increases (4) boiling point of water decreases

Description : Vegetables are cooked in lesser time by adding a pinch of salt while cooking because (1) boiling point of water increases (2) latent heat of vaporization of water decreases (3) latent heat of vaporization of water increases (4) boiling point of water decreases

Last Answer : (1) boiling point of water increases Explanation: Adding salt raises the boiling point of water, which allows food to cook at higher temperature. The higher the temperature, the higher the rate of heat transfer between the food and water, thus it cooks more quickly.

Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer : (2) steam has latent heat of vaporization Explanation: It is because steam releases its latent heat as it condenses, which is substantial. The heat of vaporization of steam is over 2000 J per gram. And when it releases that it's then 100 degree water, the same as boiling water.

Water is not suitable as a calorimetric substance because it – (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vaporization

Description : Water is not suitable as a calorimetric substance because it – (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vaporization

Last Answer : (1) has high specific heat Explanation: The specific heat of water is higher than all other common substances. Hence, water is used for heating purposes (as in hot water bottles) and for cooling ... the liquids, mercury has the lowest specific heat due to which it is used as a thermometric liquid.

Defined as the ratio of weight of dry steam to the weight of stuff.  a. dryness fraction  b. Vaporization  c. fusion  d. super heated steam

Description : Defined as the ratio of weight of dry steam to the weight of stuff.  a. dryness fraction  b. Vaporization  c. fusion  d. super heated steam

Last Answer : dryness fraction

What is the latent heat of vaporization of water at 1 atm?  A. 2314.8 kJ/kg  B. 2257.1 kJ/kg  C. 2511.7 kJ/kg  D. 2429.8 kJ/kg

Description : What is the latent heat of vaporization of water at 1 atm?  A. 2314.8 kJ/kg  B. 2257.1 kJ/kg  C. 2511.7 kJ/kg  D. 2429.8 kJ/kg

Last Answer : 2257.1 kJ/kg

A cobalt chloride solution soaked into a piece of cotton can be used as an indicator for changes in humidity levels. Pink indicates a high-humidity environment and blue a low-humidity environment. What are these color changes caused by: w) The ionization and reduction of the cobalt plus two slash cobalt plus three couple. x) The vaporization and redeposition of cobalt chloride. y) The loss and readsorption of the cobalt's waters of hydration. z) This is an illustration of the Schrodinger principle.

Description : A cobalt chloride solution soaked into a piece of cotton can be used as an indicator for changes in humidity levels. Pink indicates a high-humidity environment and blue a low-humidity environment. What ... the cobalt's waters of hydration. z) This is an illustration of the Schrodinger principle.  

Last Answer : ANSWER: Y -- THE LOSS AND READSORPTION OF THE COBALT'S WATERS OF HYDRATION.

Which of the following molecules would have the smallest molar enthalpy of vaporization? w) Water x) Formaldehyde y) Methane z) Ammonia

Description : Which of the following molecules would have the smallest molar enthalpy of vaporization? w) Water x) Formaldehyde y) Methane z) Ammonia

Last Answer : ANSWER: Y -- METHANE

The loss of water by plants in the form of vapor i called: a) evaporation b) transpiration c) evapotranspiration d) vaporization

Description : The loss of water by plants in the form of vapor i called: a) evaporation b) transpiration c) evapotranspiration d) vaporization

Last Answer : ANSWER: C -- evapotranspiration

Vegetables are cooked in lesser time by adding a pinch of salt while cooking because (1) boiling point of water increases (2) latent heat of vaporization of water decreases (3) latent heat of vaporization of water increases (4) boiling point of water decreases

Description : Vegetables are cooked in lesser time by adding a pinch of salt while cooking because (1) boiling point of water increases (2) latent heat of vaporization of water decreases (3) latent heat of vaporization of water increases (4) boiling point of water decreases 

Last Answer :  boiling point of water increases

Condensation is the reverse of (1) Vaporization (2) Smog (3) Cirrus cloud (4) Fog

Description : Condensation is the reverse of (1) Vaporization (2) Smog (3) Cirrus cloud (4) Fog

Last Answer : Vaporization

What is an example of the liquid to gas phase change equilibrium?

Description : What is an example of the liquid to gas phase change equilibrium?

Last Answer : Need answer

The energy associated with individual molecules in a gas, liquid or solid.  a. Specific Energy  b. Molecular Energy  c. Internal Energy  d. Phase Energy

Description : The energy associated with individual molecules in a gas, liquid or solid.  a. Specific Energy  b. Molecular Energy  c. Internal Energy  d. Phase Energy

Last Answer : Internal Energy

We can add a liquid called _______to water at home in order to kill germs.?

Description : We can add a liquid called _______to water at home in order to kill germs.?

Last Answer : We can add a liquid called _______to water at home in order to kill germs.

The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ) (1 + 0.5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Description : The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ... 5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Last Answer : (C) dXA /dt = k1 (1 - XA

Arrange solid, liquid and gas in order of energy. Give reason.

Description : Arrange solid, liquid and gas in order of energy. Give reason.

Last Answer : Ans. Solid < liquid < gas. This is because solid absorb energy to change into a liquid which further absorb energy to change into a gas.

For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min -1? Assume that all the other operating conditions are the same for CSTR and PFR. (A) 0.15(B) 0.30 (C) 0.60 (D) 0.90

Description : For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min ... conditions are the same for CSTR and PFR. (A) 0.15 (B) 0.30 (C) 0.60 (D) 0.90

Last Answer : (C) 0.60

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Description : The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Last Answer : (A) XA Vs . τ

The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Description : The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Last Answer : (B) 75

If a two phase system is in physical equilibrium; then it means that, the(A) Escaping tendency of each component from the liquid phase to the vaporphase is exactly equal to that from vapor phase to liquid phase(B) Temperature of the liquid phase is equal to that of the vapor phase(C) Total pressure throughout the liquid phase is equal to that throughout thevapor phase(D) All (A), (B) and (C)

Description : If a two phase system is in physical equilibrium; then it means that, the (A) Escaping tendency of each component from the liquid phase to the vapor phase is exactly equal to that from vapor phase to liquid phase ... liquid phase is equal to that throughout the vapor phase (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fill in the blank. Risk must be considered in the _____ phase and weighed against the potential benefit of the project’s success in order to decide if the project should be chosen. Select one: a. completion b. closeout c. execution d. planning e. initiation

Description : Fill in the blank. Risk must be considered in the _____ phase and weighed against  the potential benefit of the project’s success in order to decide if the project should  be chosen. Select one: a. completion b. closeout c. execution d. planning e. initiation

Last Answer : e. initiation

Once the project is approved and moves into the planninb. The total risk on the project typically reduces as activities are performed without loss. c. Risks must be weighed against the potential benefit of the project’s success in order to decide if the project should be chosen. d. Risks are identified with each major group of activities. e. A risk response plan can be used to identify increasing levels of detailed risk analysisg stage, what happens in the next phase of the project life cycle? Select one: a. Agreements for risk sharing need to be concluded.

Description : Once the project is approved and moves into the planning stage, what happens  in the next phase of the project life cycle? Select one: a. Agreements for risk sharing need to be concluded. ... activities. e. A risk response plan can be used to identify increasing levels of detailed risk analysis

Last Answer : d. Risks are identified with each major group of activities.

Once the project is approved and moves into the planning stage, what happens in the next phase of the project life cycle?Select one: a. Agreements for risk sharing need to be concluded. b. The total risk on the project typically reduces as activities are performed without loss. c. Risks must be weighed against the potential benefit of the project’s success in order to decide if the project should be chosen. d. Risks are identified with each major group of activities. e. A risk response plan can be used to identify increasing levels of detailed risk analysis

Description : Once the project is approved and moves into the planning stage, what  happens in the next phase of the project life cycle? Select one: a. Agreements for risk sharing need to be concluded. ... activities. e. A risk response plan can be used to identify increasing levels of detailed risk analysis

Last Answer : d. Risks are identified with each major group of activities.

In a three-phase electrical system, three ground detecting lamps are provided. One lamp goes dark and the others increase in brightness. When the test button is pushed, all lamps have equal illumination. You should conclude that ____________. A. there is a ground on the line with the dark lamp B. the dark lamp must be replaced C. there are grounds on the lines with the bright lamps D. this is a normal condition

Description : In a three-phase electrical system, three ground detecting lamps are provided. One lamp goes dark and the others increase in brightness. When the test button is pushed, all lamps have equal illumination. You ... C. there are grounds on the lines with the bright lamps D. this is a normal condition

Last Answer : Answer: A

Net positive suction head (NPSH) of a centrifugal pump must be (A) Greater than the vapour pressure of the liquid (B) Less than the vapour pressure of the liquid(C) Equal to the vapour pressure of the liquid(D) Less than barometric pressure

Description : Net positive suction head (NPSH) of a centrifugal pump must be (A) Greater than the vapour pressure of the liquid (B) Less than the vapour pressure of the liquid (C) Equal to the vapour pressure of the liquid (D) Less than barometric pressure

Last Answer : (A) Greater than the vapour pressure of the liquid