How much would the boiling point of water increase if 4 mol of NaCl were added to 1kg of water?

How much would the boiling point of water increase if 4 mol of NaCl were added to 1kg of water?
by

1 Answer

Answer :

Feel Free to Answer
by

Related questions

How much would the boiling of water increase if 4 mol of NaCl were added to 1 kg of water?

Description : How much would the boiling of water increase if 4 mol of NaCl were added to 1 kg of water?

Last Answer : 4.08 C

How much would the boiling point of water increase if 4 mol of sugar were added to 1 kg of water kb0.51c cmolkgfor water nd I1 for sugar?

Description : How much would the boiling point of water increase if 4 mol of sugar were added to 1 kg of water kb0.51c cmolkgfor water nd I1 for sugar?

Last Answer : Feel Free to Answer

Standard enthalpy of formation of ethane is -84.7kjper mol calculate the enthalpy change for the formation of 0.1kg ethane

Description : Standard enthalpy of formation of ethane is -84.7kjper mol calculate the enthalpy change for the formation of 0.1kg ethane

Last Answer : Standard enthalpy of formation of ethane is -84.7kjper mol calculate the enthalpy change for the formation of 0.1kg ethane

What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Description : What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Last Answer : Heat of vaporation

What would the final freezing point of water be if 3 mol of sugar were added to 1 kg of water kf1.86 c molkg for water and I 1 for sugar?

Description : What would the final freezing point of water be if 3 mol of sugar were added to 1 kg of water kf1.86 c molkg for water and I 1 for sugar?

Last Answer : Feel Free to Answer

Calculate the enthalpy of vaporisation per mole for ethanol. Given `DeltaS = 109.8 J K^(-1) mol^(-1)` and boiling point of ethanol is `78.5^(@)`.

Description : Calculate the enthalpy of vaporisation per mole for ethanol. Given `DeltaS = 109.8 J K^(-1) mol^(-1)` and boiling point of ethanol is `78.5^(@)`.

Last Answer : Calculate the enthalpy of vaporisation per mole for ethanol. Given `DeltaS = 109.8 J K^(-1) mol^(-1)` ... KJ mol^(-1)` D. Some more data is required

Tetraethyl lead (TEL) is added to petrol to (a) prevent its freezing (b) increase its boiling point (c) increase its flash point (d) increase its anti-knocking rating

Description : Tetraethyl lead (TEL) is added to petrol to (a) prevent its freezing (b) increase its boiling point (c) increase its flash point (d) increase its anti-knocking rating

Last Answer : Ans:(d)

In \( III ^{ rd } \) group of salt analysis for cations \( NH _{4} Cl \) and \( NH _{4} OH \) are added as group reagents. Which of the following can be used instead of \( NH _{4} Cl \) ?(a) \( NaCl \)(b) \( \left( NH _{4}\right)_{2} SO _{4} \)(c) \( \left( NH _{4}\right)_{2} C _{2} O _{4} \)(d) \( NH _{4} NO _{3} \)

Description : In \( III ^{ rd } \) group of salt analysis for cations \( NH _{4} Cl \) and \( NH _{4} OH \) are added as group reagents. Which of the following can be used instead of \( NH _{4} Cl \) ?(a) \( NaCl \)(b) \( \left( NH _ ... \)(c) \( \left( NH _{4}\right)_{2} C _{2} O _{4} \)(d) \( NH _{4} NO _{3} \)

Last Answer : In \( III ^{ rd } \) group of salt analysis for cations \( NH _{4} Cl \) and \( NH _{4} OH \) are added as ... O _{4} \) (d) \( NH _{4} NO _{3} \)

What is observed (i) When a beam of light is pressed through a colloidal sol (ii) An electrolyte, NaCl is added to hydrated ferric oxide sol. (iii) Electric current is passed through colloidal sol.

Description : What is observed (i) When a beam of light is pressed through a colloidal sol (ii) An electrolyte, NaCl is added to hydrated ferric oxide sol. (iii) Electric current is passed through colloidal sol.

Last Answer : Ans.: (i) Tyndal Effect (iv) Coagulation (v) Electrophoresis

In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin

Description : In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin

Last Answer : Lower the freezing point

How much salt is in 1kg of ocean water?

Description : How much salt is in 1kg of ocean water?

Last Answer : How much salt is in 1kg of water

1 kg of wood contains 15% moisture and 5% hydrogen by weight. How much water is evaporated during complete combustion of 1kg of wood? a) 0.6 kg b) 200 g c) 0.15 kg d) none of the above

Description : 1 kg of wood contains 15% moisture and 5% hydrogen by weight. How much water is evaporated during complete combustion of 1kg of wood? a) 0.6 kg b) 200 g c) 0.15 kg d) none of the above

Last Answer : b)200 g

Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Description : Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Last Answer : (B) 1-1.3

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Description : The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Last Answer : Kilocalorie

There was a fat man. He was being chased by zombies. The only way to get away was to cross a rope bridge. The rope bridge could only carry 80kg and the man was 79kg. The fat man had 2 things he needed to carry. Each weighed 1kg. How was he going to get across? -Riddles

Description : There was a fat man. He was being chased by zombies. The only way to get away was to cross a rope bridge. The rope bridge could only carry 80kg and the man was 79kg. The fat man had 2 things he needed to carry. Each weighed 1kg. How was he going to get across? -Riddles

Last Answer : Juggle the 2 things while getting across.

What fraction is 1kg in 250 g?

Description : What fraction is 1kg in 250 g?

Last Answer : 250/1000

What is the weight of a mass of 1kg equal to Newton ?

Description : What is the weight of a mass of 1kg equal to Newton ?

Last Answer : Sitting on the earth , the weight of an object of mass 1 kg = mg = 1 * 9.8 [g = 9.8ms ^ -2] = 9.8 N ( Newton) Therefore , the weight of an object of mass 1 kg on Earth is 9.8 Newtons.

A uniform rope of mass M=0.1kg and length L=10m hangs from the celling. `[g=10m//s^(2)]` :-

Description : A uniform rope of mass M=0.1kg and length L=10m hangs from the celling. `[g=10m//s^(2)]` :-

Last Answer : A uniform rope of mass M=0.1kg and length L=10m hangs from the celling. `[g=10m//s^(2) ... in the rope remain constant along the length of the rope

`1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Description : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Last Answer : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

What is greater 1kg or 100g?

Description : What is greater 1kg or 100g?

Last Answer : 1

How many times heavier is 1kg to 500g?

Description : How many times heavier is 1kg to 500g?

Last Answer : Feel Free to Answer

What is greater 1kg or 100g?

Description : What is greater 1kg or 100g?

Last Answer : 1

What percent of 1kg is 250g?

Description : What percent of 1kg is 250g?

Last Answer : 4

A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Description : A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Last Answer : D 0.00791

Flat Rate parcel price 1Kg, 2 Kg & 5 Kg are a) 125,200 & 400 b) 100,150 & 200 c) 50,100 &150 d) None of these

Description : Flat Rate parcel price 1Kg, 2 Kg & 5 Kg are a) 125,200 & 400 b) 100,150 & 200 c) 50,100 &150 d) None of these

Last Answer : a) 125,200 & 400

Stoichiometric combustion of 12 kg of carbon requires __________ of oxygen. (A) 1kg mole(B) 22.4 Nm3(C) 32 kg(D) All (A), (B) and (C)

Description : Stoichiometric combustion of 12 kg of carbon requires __________ of oxygen. (A) 1kg mole (B) 22.4 Nm3 (C) 32 kg (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Tea and Coffee are perfect substitute of each other, given the price of Tea and Coffee being `100 and `200 per Kg. a consumer is prepared to buy 3 Kg. of each. If the price of tea remain same and the price of Coffee rises to `400 per kg. the demand for Tea goes to 6 Kg. and that of Coffee falls to 1Kg. The elasticity of substitution between Tea and Coffee is (a) 1 ; (b) 4 ; (c) 5 ; (d) 3

Description : Tea and Coffee are perfect substitute of each other, given the price of Tea and Coffee being `100 and `200 per Kg. a consumer is prepared to buy 3 Kg. of each. If the price of tea remain same and the price of ... elasticity of substitution between Tea and Coffee is (a) 1 ; (b) 4 ; (c) 5 ; (d) 3

Last Answer : (c) 5 ;

Determine the amount of heat required to produce 1Kg of steam at a pressure of 7 bar, at a temperature 29 degree Celsius, under the following . (i) When the steam is wet having dryness fraction 0.87 (ii) When the steam is dry saturated Assume specific heat = 2.35KJ/KgK

Description : Determine the amount of heat required to produce 1Kg of steam at a pressure of 7 bar, at a temperature 29 degree Celsius, under the following . (i) When the steam is wet having dryness fraction 0.87 (ii) When the steam is dry saturated Assume specific heat = 2.35KJ/KgK 

Last Answer : P 7bar T 29ᵒC x=0.9 m =1kg C p =2.35 KJ/KgK At pressure 7 bar saturation Temp T sat =165 ᵒC h f =697.2 KJ/Kg h fg= 2064.8 KJ/Kg i) Heat required when steam is wet ... ) When the stem is dry saturated hg=hf+hfg =2762 kj Heat actually required = 2762-121.8 = 2640.2 kj

Should salt be added to the cooking water while boiling pasta?

Description : Should salt be added to the cooking water while boiling pasta?

Last Answer : You don't have to add salt to the cooking water. The salt adds flavor and raises the boiling point a bit, but you can boil the pasta without the salt.

To get the hard boiled eggs, why common salt is added to water before boiling the eggs?

Description : To get the hard boiled eggs, why common salt is added to water before boiling the eggs?

Last Answer : Due to addition of common salt the B. P. of the salt containing water elevated, hence the egg at high temperature becomes hard.

Pick up the correct statement from the following: (A) Due to boiling, the bacterias present in water can be destroyed (B) Lime may be used for softening hard water (C) Excess lime when added to water, raises the pH value of water (D) All the above

Description : Pick up the correct statement from the following:  (A) Due to boiling, the bacterias present in water can be destroyed  (B) Lime may be used for softening hard water  (C) Excess lime when added to water, raises the pH value of water  (D) All the above 

Last Answer : (D) All the above 

Give reason for the following: (a)LiCl is more covalent than KCl. (b)LiF has lower melting point than NaCl. (c)CuCl is more covalent than NaCl.

Description : Give reason for the following: (a)LiCl is more covalent than KCl. (b)LiF has lower melting point than NaCl. (c)CuCl is more covalent than NaCl.

Last Answer : Ans(a).Due to smaller size and high poalrising power of Li+ ion ,LiCl is more covalent than KCl. (b)Small cation Li+ ion highly polarizes large anion I- , LiI is more covalent and hence has ... to pseudo inert gas configuration, Cu+ is more polarizing than Na+ and hence CuCl is more Covalent NaCl.

Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Description : Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Last Answer : (A) Ethylene glycol

Mercaptans are (A) Low boiling sulphur compounds(B) Added in LPG cylinders to detect gas leakage by its smell(C) Undesirable in petrol, as they reduce its octane number(D) All (A), (B) and (C)

Description : Mercaptans are (A) Low boiling sulphur compounds (B) Added in LPG cylinders to detect gas leakage by its smell (C) Undesirable in petrol, as they reduce its octane number (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The use of pressurized radiator cap is to a) Reduce evaporation loss b) Increase engine operating temperature c) Increase boiling point of water d) Reduce heat losses

Description : The use of pressurized radiator cap is to a) Reduce evaporation loss b) Increase engine operating temperature c) Increase boiling point of water d) Reduce heat losses

Last Answer : ans c

How many of the following properties increase down the group for nitrogen family (a) Atomic size (b) Acidic character of oxides (c) Boiling point of h

Description : How many of the following properties increase down the group for nitrogen family (a) Atomic size (b) Acidic character of oxides (c) Boiling point of h

Last Answer : How many of the following properties increase down the group for nitrogen family (a) Atomic ... Metallic character (g) Basic character of hydrides

How many of the following properties increase down the group for nitrogen family (a) Atomic size (b) Acidic character of oxides (c) Boiling point of h

Description : How many of the following properties increase down the group for nitrogen family (a) Atomic size (b) Acidic character of oxides (c) Boiling point of h

Last Answer : How many of the following properties increase down the group for nitrogen family (a) Atomic ... Metallic character (g) Basic character of hydrides

How many of the following properties of noble gases would increase from Helium to Radon? Boiling point, First lonisation enthalpy, Atomic volume, Abun

Description : How many of the following properties of noble gases would increase from Helium to Radon? Boiling point, First lonisation enthalpy, Atomic volume, Abun

Last Answer : How many of the following properties of noble gases would increase from Helium to Radon? ... Density at STP. Valence electrons, Critical temperature.

When a liquid is at its boiling point, no temperature change takes place due to heating. The energy supplied due to heating (a) Is used up to increase the potential energy of the liquid molecules (b) Is used up to increase the kinetic energy of the molecules (c) Is used up to increase the kinetic energy and potential energy of the molecules (d) Is wasted

Description : When a liquid is at its boiling point, no temperature change takes place due to heating. The energy supplied due to heating (a) Is used up to increase the potential energy of the liquid molecules (b ... c) Is used up to increase the kinetic energy and potential energy of the molecules (d) Is wasted

Last Answer : Ans:(a)

In the pressure cooker, cooking is faster because the increase in vapour pressure - (1) increase the specific heat (2) decreases the specific heat (3) decreases the boiling point (4) increases the boiling point

Description : In the pressure cooker, cooking is faster because the increase in vapour pressure - (1) increase the specific heat (2) decreases the specific heat (3) decreases the boiling point (4) increases the boiling point

Last Answer : (4) increases the boiling point

With the increase of pressure, the boiling point of any substance - (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Description : With the increase of pressure, the boiling point of any substance - (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Last Answer : (1) Increases Explanation: The temperature stays the same until all the liquid has vaporized. As the temperature of a liquid rises, the pressure of escaping vapor also rises, and at the boiling point ... vapor is equal to that exerted on the liquid by the surrounding air, causing bubbles to form.

With the increase of pressure, the boiling point of any substance – (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Description : With the increase of pressure, the boiling point of any substance – (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Last Answer : (1) Increases Explanation: The temperature stays the same until all the liquid has vaporized. As the temperature of a liquid rises, the pressure of escaping vapor also rises, and at the boiling point ... vapor is equal to that exerted on the liquid by the surrounding air, causing bubbles to form.

The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Description : The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Last Answer : (A) Increase

In a multiple effect evaporator, the effect of boiling point elevation is to (A) Reduce the capacity (B) Reduce the economy (C) Increase the economy (D) None of these

Description : In a multiple effect evaporator, the effect of boiling point elevation is to (A) Reduce the capacity (B) Reduce the economy (C) Increase the economy (D) None of these

Last Answer : (A) Reduce the capacity

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

Which of the following decreases with increase in pressure? (A) Melting point of ice (B) Melting point of wax (C) Boiling point of liquids (D) None of these

Description : Which of the following decreases with increase in pressure? (A) Melting point of ice (B) Melting point of wax (C) Boiling point of liquids (D) None of these

Last Answer : (A) Melting point of ice

__________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : __________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Assertion: Coacervates are believed to be precursors of life. Reason: Coacervates were self duplicating aggregates of proteins surrounded by lipid mol

Description : Assertion: Coacervates are believed to be precursors of life. Reason: Coacervates were self duplicating aggregates of proteins surrounded by lipid mol

Last Answer : Assertion: Coacervates are believed to be precursors of life. Reason: Coacervates were self duplicating ... both the assertion and reason are false.

Phenols are added in gasoline to (A) Improve the octane number(B) Act as an antioxidant(C) Reduce its viscosity(D) Increase its pour point

Description : Phenols are added in gasoline to (A) Improve the octane number (B) Act as an antioxidant (C) Reduce its viscosity (D) Increase its pour point

Last Answer : (B) Act as an antioxidant