What is the Volume of a pipe .475 inches in diameter?

What is the Volume of a pipe .475 inches in diameter?
by

1 Answer

Answer :

That would depend on its length which has not been given
by
selected by

Related questions

How many cubic inches 3 inch diameter pipe 8 ft long?

Description : How many cubic inches 3 inch diameter pipe 8 ft long?

Last Answer : how many cubic inches in a 3 inch diameter pipe 8 ft long

Nominal Pipe Size (NPS) of a pipe less than 12 inches in diameter indicates its(A) Inner diameter(B) Outer diameter(C) Thickness(D) Neither inner nor outer diameter

Description : Nominal Pipe Size (NPS) of a pipe less than 12 inches in diameter indicates its (A) Inner diameter (B) Outer diameter (C) Thickness (D) Neither inner nor outer diameter

Last Answer : (D) Neither inner nor outer diameter

Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Description : Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Last Answer : 7.85

The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Description : The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Last Answer : Let the length of one parallel side of trapezium is a. So length of other parallel side = a + 4 Given the area of trapezium = 475 & the height = 19 Now area of a trapezium = 21 height ... =23∴Length of smalle rparallel side of trapezium =23 & Length of other parallel side of trapezium = 23+4=27

The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Description : The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Last Answer : According to question find the lengths of its two parallel sides

The area of a trapezium is 475 cm square and the .. -Maths 9th

Description : The area of a trapezium is 475 cm square and the .. -Maths 9th

Last Answer : Let AB = x cm ∴ DC = x + 4 Area of trapezium ABCD = 1/2(AB + DC)AL 475 = 1/2(x + x + 4) x 19 950 = (2x + 4)19 ⇒ 38x + 76 = 950 ⇒ 38x = 950 - 76 ⇒ x = 874/38 ⇒ x = 23 ∴ Sides of trapezium are 23, 23 + 4 i.e., 23 cm, 27 cm

What is 475 divided by1000?

Description : What is 475 divided by1000?

Last Answer : 475 divided by1000 = 0.475

How do you write .475 as a fraction?

Description : How do you write .475 as a fraction?

Last Answer : 475/1000 or 19/40 in its simplest form.

What is 14.475 rounded to hunderedths?

Description : What is 14.475 rounded to hunderedths?

Last Answer : 14.48If the digit to be rounded is followed by a 5 or greater, the number is rounded up. If it is less than 5, the digit remains the same and the digits to the right are dropped. In the number 14.475, ... Since the 7 is followed by 5, you round 7 up to 8. So 14.475 rounded to hundredths is 14.48.

What is the percent decrease from 500 to 475?

Description : What is the percent decrease from 500 to 475?

Last Answer : Need answer

What is 400 + 475?

Description : What is 400 + 475?

Last Answer : 875

The reduced levels of the string at the consecutive sight rails A and B are 203.575 m, 203.475 m respectively. If the difference of their R.D.s is 10 m, the gradient of the sewer line is A. 1 in 100 upward B. 1 in 500 upward C. 1 in 100 downward D. 1 in 503 upward

Description : The reduced levels of the string at the consecutive sight rails A and B are 203.575 m, 203.475 m respectively. If the difference of their R.D.s is 10 m, the gradient of the sewer line is A. 1 in 100 upward B. 1 in 500 upward C. 1 in 100 downward D. 1 in 503 upward

Last Answer : ANS: C

In the schematic diagram of the DC compound generator shown in the illustration, the positive ammeter reading is 500 amps and the negative ammeter reading is 475 amps. What is the current flow through the neutral bus? EL-0037 A. 0 amp B. 12.5 amp C. 25 amp D. 975 amp

Description : In the schematic diagram of the DC compound generator shown in the illustration, the positive ammeter reading is 500 amps and the negative ammeter reading is 475 amps. What is the current flow through the neutral bus? EL-0037 A. 0 amp B. 12.5 amp C. 25 amp D. 975 amp

Last Answer : Answer: C

The laser frequency when the light has the wavelength 800 nm is a. 375 x 10^12 Hz b. 475 x 10^15 Hz c. 375 x 10^9 Hz d. 375 x 10^18 Hz

Description : The laser frequency when the light has the wavelength 800 nm is a. 375 x 10^12 Hz b. 475 x 10^15 Hz c. 375 x 10^9 Hz d. 375 x 10^18 Hz

Last Answer : a. 375 x 10^12 Hz

The maximum payload of a TCP segment is: a. 65,535 b. 65,515 c. 65,495 d. 65,475

Description : The maximum payload of a TCP segment is: a. 65,535 b. 65,515 c. 65,495 d. 65,475

Last Answer : c. 65,495

The laser frequency when the light has the wavelength 800 nm is ∙ a. 375 x 1012 Hz ∙ b. 475 x 1015 Hz ∙ c. 375 x 109 Hz ∙ d. 375 x 1018 Hz

Description : The laser frequency when the light has the wavelength 800 nm is ∙ a. 375 x 1012 Hz ∙ b. 475 x 1015 Hz ∙ c. 375 x 109 Hz ∙ d. 375 x 1018 Hz

Last Answer : d. 375 x 1018 Hz

Service life in terms of total GMT carried for 52 kg. 90 UTS rail is:- (a) 425 GMT (b) 475 GMT (c) 525 GMT* (d) 545 GMT

Description : Service life in terms of total GMT carried for 52 kg. 90 UTS rail is:- (a) 425 GMT (b) 475 GMT (c) 525 GMT* (d) 545 GMT

Last Answer : (c) 525 GMT*

The Maximum payload of a TCP segment is (A) 65,535 (B) 65,515 (C) 65,495 (D) 65,475

Description : The Maximum payload of a TCP segment is (A) 65,535 (B) 65,515 (C) 65,495 (D) 65,475

Last Answer : (C) 65,495

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the fifth stick on the side to which the tree should fall. During construction of a dam, a tree 18 inches in diameter was completely covered by water. Since the treetop was fouling the boat's propellers, it had to be cut down. A diver went down and put a stick of dynamite on the four sides of the tree. Since the current is flowing south at 2 knots per hour, on which side of the tree would you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Description : Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the ... you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Last Answer : It doesn't matter where the fifth stick is placed, since the tree won't fall in any direction. Being wood, it will float and rise to the surface.

the diameter of a frisbee is 12 inches. what's the area of the frisbee? -General Knowledge

Description : the diameter of a frisbee is 12 inches. what's the area of the frisbee? -General Knowledge

Last Answer : Area of a circle = pi x radius squared. Radius of a Frisbee of diameter 12 in. = 12/2 = 6 ins. Area of Frisbee = 3.14 x (6 x 6) = 3.14 x 36 = 113.04 sq in.

What decking is an acceptable repair procedure for a flatbed trailer that has a hole in its wood deck about 2 inches in diameter?

Description : What decking is an acceptable repair procedure for a flatbed trailer that has a hole in its wood deck about 2 inches in diameter?

Last Answer : What type of fire extinguishers are commercial vehiclestransporting ammunition

What is the diameter if the circumference is 4.25 inches?

Description : What is the diameter if the circumference is 4.25 inches?

Last Answer : Diameter of circle: 4.25/pi = 1.353 inches rounded to 3 decimalplaces

If The exact area of a circle is 81pi square inches what are the radius and diameter of the circle explain?

Description : If The exact area of a circle is 81pi square inches what are the radius and diameter of the circle explain?

Last Answer : The radius is 9 inches because area of circle is pi*9 squared =81pi square inches and the diameter is twice the radius which is2*9 = 18 inches

How many square inches in a 8 inch diameter circle?

Description : How many square inches in a 8 inch diameter circle?

Last Answer : Area = pi*42 = 50.265 square inches to 3 decimal places

A snack bar sells popcorn and cone shaped containers. One container has a diameter of 8 inches and a height of 10 inches. How many cubic inches of popcorn does the container hold (Rounded to the nearest tenth)?

Description : A snack bar sells popcorn and cone shaped containers. One container has a diameter of 8 inches and a height of 10 inches. How many cubic inches of popcorn does the container hold (Rounded to the nearest tenth)?

Last Answer : In coned shape containers*

What is the area of a circle with a diameter of 49 inches?

Description : What is the area of a circle with a diameter of 49 inches?

Last Answer : Using 3.14 as Pi the area of circle is: 1884.785

A wheel has a diameter of 21 inches. How far does it travel if it makes 30 complete revolutions?

Description : A wheel has a diameter of 21 inches. How far does it travel if it makes 30 complete revolutions?

Last Answer : I need help

An automatic ice-cream scoop serves spherical helpings of ice cream. The scoop can be adjusted to serve helpings from 1 inch in diameter to 2 inches in diameter. If Tim orders a scoop with a 2-inch diameter, and if Paul wants only half as much ice cream?

Description : An automatic ice-cream scoop serves spherical helpings of ice cream. The scoop can be adjusted to serve helpings from 1 inch in diameter to 2 inches in diameter. If Tim orders a scoop with a 2-inch diameter, and if Paul wants only half as much ice cream?

Last Answer : THE ANSWER IS 2BECAUSE..... We have to use Tim's scoop radius to calculate his scoop volume, then divide it by 2 to find Paul's scoop volume and finally calculate its radius to get the diameter. Tim's scoop radius ... to write, 4/3*pi* radius cubed= 4/6*pi(i.e. Paul's scoop volume and the volume o

How much greater is the area of a large pizza with a diameter of 8 inches than a medium pizza with a diameter of 7 inches use 3.14 for pi.?

Description : How much greater is the area of a large pizza with a diameter of 8 inches than a medium pizza with a diameter of 7 inches use 3.14 for pi.?

Last Answer : 6

A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Description : A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Last Answer : Answer: C

Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Description : Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Last Answer : (A) 2

Pipes having diameter 14 inches or more are designated by their (A) Outside diameter (B) Inside diameter (C) Schedule number (D) None of these

Description : Pipes having diameter 14 inches or more are designated by their (A) Outside diameter (B) Inside diameter (C) Schedule number (D) None of these

Last Answer : (A) Outside diamete

Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) (A) D = 1840 H0.5 /N (B) D = 1840 N/H0.5 (C) H = 1840 D0.5 /N (D) D = 1840 H/N

Description : Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) (A) D = 1840 H0.5 /N (B) D = 1840 N/H0.5 (C) H = 1840 D0.5 /N (D) D = 1840 H/N

Last Answer : (A) D = 1840 H0.5 /N

In a hot water heating system, there is cylindrical pipe of length 28 m and diameter 5 cm. Find the total radiating surface in the system. -Maths 9th

Description : In a hot water heating system, there is cylindrical pipe of length 28 m and diameter 5 cm. Find the total radiating surface in the system. -Maths 9th

Last Answer : Height of cylindrical pipe = Length of cylindrical pipe = 28m Radius of circular end of pipe = diameter/ 2 = 5/2 cm = 2.5cm = 0.025m Now, CSA of cylindrical pipe = 2πrh, where r = radius and h = height of ... = 2 (22/7) 0.025 28 m2 = 4.4m2 The area of the radiating surface of the system is 4.4m2.

A metal pipe is 77 cm long. The inner diameter of a cross section is 4 cm, the outer diameter being 4.4cm. -Maths 9th

Description : A metal pipe is 77 cm long. The inner diameter of a cross section is 4 cm, the outer diameter being 4.4cm. -Maths 9th

Last Answer : Let r1 and r2 Inner and outer radii of cylindrical pipe r1 = 4/2 cm = 2 cm r2 = 4.4/2 cm = 2.2 cm Height of cylindrical pipe, h = length of cylindrical pipe = 77 cm (i) curved surface ... CSA of roller = (500 31680) cm2 = 15840000 cm2 = 1584 m2. Therefore, area of playground is 1584 m2. Answer!

Water is following at the rate of 5 km/hr through a pipe of diameter 14 cm into a rectangular tank which is 50 m long -Maths 9th

Description : Water is following at the rate of 5 km/hr through a pipe of diameter 14 cm into a rectangular tank which is 50 m long -Maths 9th

Last Answer : Convert all to metres: 5 km = 5000 m 14 cm = 0.14 m 7 cm = 0.07 m Find the radius: Radius = Diameter 2 Radius = 0.14 2 = 0.07 m Find the amount of water that flowed out in an hour: Volume ... hours needed: Number of hours = 154 77 = 2 hours It takes 2 hours to fill up the tank to rise by 7 cm

What is the diameter a hand bender can bend copper pipe?

Description : What is the diameter a hand bender can bend copper pipe?

Last Answer : Feel Free to Answer

What instrument can be used to measure the diameter of a pipe?

Description : What instrument can be used to measure the diameter of a pipe?

Last Answer : What is the answer ?

The suction pipe diameter of refrigerating unit compressor in comparison to delivery side is (a) bigger (b) smaller (c) equal (d) smaller/bigger depending on capacity

Description : The suction pipe diameter of refrigerating unit compressor in comparison to delivery side is (a) bigger (b) smaller (c) equal (d) smaller/bigger depending on capacity

Last Answer : Ans: a

Large diameter sewers subjected to external pressure alone, are reinforced A. Near the inner surface of the pipe B. Near the outer surface of the pipe C. Both A. and B. D. With elliptical cage

Description : Large diameter sewers subjected to external pressure alone, are reinforced A. Near the inner surface of the pipe B. Near the outer surface of the pipe C. Both A. and B. D. With elliptical cage

Last Answer : ANS: D

The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Description : The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Last Answer : (B) Less

A fluid is flowing inside the inner tube of a double pipe heat exchanger with diameter 'd'. For a fixed mass flow rate, the tube side heat transfer co￾efficient for turbulent flow conditions is proportional to (A) d 0.8 (B) d -0.2 (C) d -1 (D) d -1.8

Description : A fluid is flowing inside the inner tube of a double pipe heat exchanger with diameter 'd'. For a fixed mass flow rate, the tube side heat transfer co￾efficient for turbulent flow conditions is proportional to (A) d 0.8 (B) d -0.2 (C) d -1 (D) d -1.8

Last Answer : (B) d -0.2

The Sieder-Tate correlation for heat transfer in turbulent flow in pipe gives Nu α Re 0.8 , where, Nu is the Nusselt number and Re is the Reynolds number for the flow. Assuming that this relation is valid, the heat transfer co-efficient varies with the pipe diameter (D) as (A) D-1.8 (B) D-0.2 (C) D0.2 (D) D1.8

Description : The Sieder-Tate correlation for heat transfer in turbulent flow in pipe gives Nu α Re 0.8 , where, Nu is the Nusselt number and Re is the Reynolds number for the flow. Assuming that this relation is valid, the heat transfer co-efficient ... pipe diameter (D) as (A) D-1.8 (B) D-0.2 (C) D0.2 (D) D1.8

Last Answer : (B) D-0.2

Pressure gradient in the pipe flow is influenced by the (A) Diameter of pipe (B) Velocity of the fluid (C) Density & viscosity of the fluid (D) All (A), (B) and (C)

Description : Pressure gradient in the pipe flow is influenced by the (A) Diameter of pipe (B) Velocity of the fluid (C) Density & viscosity of the fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The head loss in turbulent flow in a pipe varies (A) Directly as the velocity (B) Inversely as the square of the velocity (C) Approximately as the square of the velocity (D) Inversely as the square of the diameter

Description : The head loss in turbulent flow in a pipe varies (A) Directly as the velocity (B) Inversely as the square of the velocity (C) Approximately as the square of the velocity (D) Inversely as the square of the diameter

Last Answer : (C) Approximately as the square of the velocity

Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter

Description : Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter

Last Answer : (A) Pitot tube

Vena-contracta pressure tapping is at a distance __________ from the position of an orificemeter fitted in a pipe of internal diameter 'd' (A) d (B) 0.5 d (C) 2d (D) 4d

Description : Vena-contracta pressure tapping is at a distance __________ from the position of an orificemeter fitted in a pipe of internal diameter 'd' (A) d (B) 0.5 d (C) 2d (D) 4d

Last Answer : (B) 0.5 d

Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Description : Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Last Answer : (A) Type of orifice

Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge(B) Length & discharge(C) Length & diameter(D) Friction factor & diameter

Description : Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge (B) Length & discharge (C) Length & diameter (D) Friction factor & diameter

Last Answer : (A) Head & discharge