The time constant of the capacitance circuit is defined as the time during which voltage?

The time constant of the capacitance circuit is defined as the time during which voltage?
by

1 Answer

Answer :

The time constant of the capacitance circuit is defined as the time during which voltage rises to 63.2% of its final steady value.

by

Related questions

Time constant of a circuit is the time in seconds taken after the application of voltage to each?

Description : Time constant of a circuit is the time in seconds taken after the application of voltage to each?

Last Answer : Time constant of a circuit is the time in seconds taken after the application of voltage to each 63% of maximum value.

Time constant of a capacitive circuit

Last Answer : It is denoted as τ, tau and has the value of 1/RC. We

The time constant of a series R-C circuit is given by?

Description : The time constant of a series R-C circuit is given by?

Last Answer : The time constant of a series R-C circuit is given by RC.

Time constant of a capacitive circuit?

Description : Time constant of a capacitive circuit?

Last Answer : Time constant of a capacitive circuit increase with increase of capacitance and increase of resistance.

Time constant of an inductive circuit?

Description : Time constant of an inductive circuit?

Last Answer : Time constant of an inductive circuit increases with increase of inductance and decrease of resistance.

Time constant for RC circuit formula

Description : Time constant for RC circuit formula τ = RC Where, τ = time constant

Last Answer : Time constant for RC circuit formula τ = RC Where, τ = time constant

The time constant of the servo-mechanism can be decreased by

Description : The time constant of the servo-mechanism can be decreased by

Last Answer : The time constant of the servo-mechanism can be decreased by decreasing the inertia of the system

A diode in which the change in reverse bias voltage varies the capacitance is called as

Description : A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode  

Last Answer : A diode in which the change in reverse bias voltage varies the capacitance is called as Varactor diode

effect of inductance and capacitance on performance of transmission line.

Description : effect of inductance and capacitance on performance of transmission line.

Last Answer : Following are the effect on performance of transmission line:  1. Due to inductance (L) voltage drop in transmission line produces.  2. Capacitor (C) draws charging current ... , transmission line efficiency, voltage regulation & also power factor of transmission line gets affected. 

What is capacitance?

Description : What is capacitance?

Last Answer : Capacitance is the capacity of element to store electric charge in it. The unit of capacitance is Farad. 

Energy stored in electrostatic field of capacitance formula

Description : Energy stored in electrostatic field of capacitance formula

Last Answer : Energy stored in electrostatic field of capacitance formula

Capacitance formula

Description : Capacitance

Last Answer : Capacitance formula

What is the capacitance when a capacitor passes a current of 31.43 mA when supplied with 40 V AC with a

Description : What is the capacitance when a capacitor passes a current of 31.43 mA when supplied with 40 V AC with a frequency of 1000 Hz? A) 0.125 F B) 0.125 μF C) 1257.2 μF D) None of these

Last Answer : What is the capacitance when a capacitor passes a current of 31.43 mA when supplied with 40 V AC with a frequency of 1000 Hz? A) 0.125 F B) 0.125 μF C) 1257.2 μF D) None of these

What is the reciprocal of capacitance?

Description : What is the reciprocal of capacitance?

Last Answer : The reciprocal of capacitance is called elastance, and its unit is the reciprocal farad, also called the daraf.

Calculate the value of equivalent capacitance of the combination.

Description : Calculate the value of equivalent capacitance of the combination.

Last Answer : Calculate the value of equivalent capacitance of the combination

Explain estimation of channel capacitance of CMOS.

Description : Explain estimation of channel capacitance of CMOS.

Last Answer : Capacitance estimation: The dynamic response i.e. switching speed of MOS system depends on capacitance associated with the MOS devices which are formed by different layers in MOS transistors ... are due to three dimensional, distributed charge voltage relations within the device structure. 

Capacitance is the ability of a body to store an__________.

Description : Capacitance is the ability of a body to store an__________.  (A) electrical charge (B) electric current (C) voltage (D) All of the above

Last Answer : Capacitance is the ability of a body to store an electrical charge 

For 11 kV line the capacitance per km per phase will be of the order of:

Description : For 11 kV line the capacitance per km per phase will be of the order of:  (A) 1 Farad (B) 0.1 Farad (C) 0.01 Farad (D) 0.01 microF

Last Answer : For 11 kV line the capacitance per km per phase will be of the order of: 0.01 Farad

Which of the following can be used to measure the capacitance of a capacitor?

Description : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Last Answer : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Shunt capacitance is neglected while considering?

Last Answer : Shunt capacitance is neglected while considering short transmission line.

does the BJT have internal capacitance?

Last Answer : Yes BJT have internal capacitances.

The time of closing the cycle, in modern circuit breakers is?

Last Answer : The time of closing the cycle, in modern circuit breakers is 0.003 sec.

A dc chopper is fed from a constant voltage mains the duty ratio of chopper is progressively increased while

Description : A dc chopper is fed from a constant voltage mains the duty ratio of chopper is progressively increased while the chopper feeds an RL load. The per unit current ripple would  (1) increase progressively  (2 ... 0.5 and then increase  (4) increase to a maximum value at α = 0.5 and then decrease

Last Answer : A dc chopper is fed from a constant voltage mains the duty ratio of chopper is progressively increased while the chopper feeds an RL load. The per unit current ripple would increase to a maximum value at α = 0.5 and then decrease

In a given transformer for a given applied voltage, losses which remain constant irrespective of load changes are?

Description : In a given transformer for a given applied voltage, losses which remain constant irrespective of load changes are?

Last Answer : In a given transformer for a given applied voltage, losses which remain constant irrespective of load changes are hysteresis and eddy current losses.

Define : i) Diffuse radiation ii) Beam radiation ii) Insolation iv) Solar constant

Description : Define : i) Diffuse radiation ii) Beam radiation ii) Insolation iv) Solar constant

Last Answer : i) Diffuse radiation: It is the solar radiation which is scattered by the particles in earth's atmosphere and this radiation does not have any unique direction.  ii) Beam radiation: Solar radiation ... from the sun.  OR  It is the average radiation received outside the earth's atmosphere

Define the term solar constant.

Description : Define the term solar constant.

Last Answer : Solar energy arrived atmosphere at a constant rate of 1350W/M²

What is meant by energy meter constant?

Description : What is meant by energy meter constant?

Last Answer : Energy Meter Constant  A fixed value which is used when converting meter readings to actual energy use, especially when potential transformers and similar types of equipment are used in metering. For example, K=--------rev/Kwh

In series resonant circuit, increasing inductance to its twice value and reducing capacitance to its half value?

Description : In series resonant circuit, increasing inductance to its twice value and reducing capacitance to its half value?  

Last Answer : In series resonant circuit, increasing inductance to its twice value and reducing capacitance to its half value will increase the selectivity of the circuit.

Give the expression for ABCD constant of T model.

Description : Give the expression for ABCD constant of T model.

Last Answer : Expression for ABCD constants of T model: 

A transfer function has a second order denominator and constant gain in the numerator

Description : A transfer function has a second order denominator and constant gain in the numerator

Last Answer : A transfer function has a second order denominator and constant gain in the numerator the system has two zeros at infinity

A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms

Description : A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is

Last Answer : Please show the solution for this question

When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a

Description : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is

Last Answer : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is √3/2

While keeping the excitation constant, if the steam supply of an alternator running in parallel with another

Description : While keeping the excitation constant, if the steam supply of an alternator running in parallel with another identical alternator is increased, then (A) It would over-run the other alternator (B) Its rotor ... (C) Its portion of share in load will increase (D) Its power factor would be decreased.

Last Answer : While keeping the excitation constant, if the steam supply of an alternator running in parallel with another identical alternator is increased, then Its portion of share in load will increase

For constant torque drive which speed control method is preferred ?

Last Answer : For constant torque drive armature voltage control speed control method is preferred.

The maximum constant load torque under which a synchronous motor will pull into synchronism...

Description : The maximum constant load torque under which a synchronous motor will pull into synchronism at rated rotor supply voltage and frequency is known as?

Last Answer : The maximum constant load torque under which a synchronous motor will pull into synchronism at rated rotor supply voltage and frequency is known as pull-in torque.

In an actual transformer the iron loss remains practically constant from no load to full load because?

Description : In an actual transformer the iron loss remains practically constant from no load to full load because?

Last Answer : In an actual transformer the iron loss remains practically constant from no load to full load because core flux remains practically constant.

For a transformer, operating at constant load current, maximum efficiency will occur at?

Description : For a transformer, operating at constant load current, maximum efficiency will occur at?

Last Answer : For a transformer, operating at constant load current, maximum efficiency will occur at unity power factor.

If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Description : If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Last Answer : 0.1s

A supply of 24 V DC is applied across a circuit which consist of three resistors connected in parallel R1= 1.2KΩ, R2= 560 Ω, R3= 2.1Ω and a fourth resistor of 7.8 Ω connected in series with the parallel group. Determine the current, voltage and power across each resistor

Last Answer : Req= (1/1200 +1/560 + 1/2.1)^-1        = 2.1 ohms RT= 2.1 + 7.8      = 9.9 ohms IT = V/R = 24/9.9                = 2.4 A Veq= R I =  2.1 2 ... 7.8         = 12.096 w                 = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose [email protected]

What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively?

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Last Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______

Description : A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______ A) DC voltage restorer B) Clamping circuit C) Both A and B D) None of these

Last Answer : A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______ A) DC voltage restorer B) Clamping circuit C) Both A and B D) None of these

A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is ...

Description : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is (A) 300 W (B) 150 W (C) 45 W (D) 20 W

Last Answer : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is 150 W

in open circuit or no load test of transformer which side is low voltage side and which side is high voltage side?

Last Answer : Primary side is low voltage side and secondary side is high voltage side.

Source transformation Replace the circuit with voltage source in series with a single resistor

Description : Source transformation Replace the circuit with voltage source in series with a single resistor

Last Answer : Source transformation Replace the circuit with voltage source in series with a single resistor

In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

The arc voltage in a circuit breaker is :

Description : The arc voltage in a circuit breaker is :

Last Answer : The arc voltage in a circuit breaker is : in phase with the arc current

An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic

Description : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Last Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

The arc voltage produced in A.C. circuit breaker is always?

Last Answer : The arc voltage produced in A.C. circuit breaker is always in phase with the arc current.