What is hard and brittle iron that is formed into a particular shape by pouring the liquid metal into a mold?

What is hard and brittle iron that is formed into a particular shape by pouring the liquid metal into a mold?
by

1 Answer

Answer :

I think it would be cast
by
selected by

Related questions

Minimum shear reinforcement is necessary to [ A ] Prevent brittle shear failure [ B ] Prevent failure due to shrinkage and thermal stresses [ C ] Hold the reinforcements in place while pouring concrete [ D ] All the above.

Description : Minimum shear reinforcement is necessary to [ A ] Prevent brittle shear failure [ B ] Prevent failure due to shrinkage and thermal stresses [ C ] Hold the reinforcements in place while pouring concrete [ D ] All the above.

Last Answer : [ D ] All the above.

Shrinkage allowance on pattern is provided to compensate for shrinkage when the (A) Metal changes from liquid state to solid state at freezing temperature (B) Solid phase temperature drops from freezing temperature to the room temperature (C) Liquid metal temperature drops from pouring temperature to room temperature (D) Liquid metal temperature drops from pouring temperature to freezing temperature

Description : Shrinkage allowance on pattern is provided to compensate for shrinkage when the (A) Metal changes from liquid state to solid state at freezing temperature (B) Solid phase temperature drops ... to room temperature (D) Liquid metal temperature drops from pouring temperature to freezing temperature

Last Answer : (B) Solid phase temperature drops from freezing temperature to the room temperature

White cast iron is not (A) Malleable(B) Whitish in color(C) Brittle(D) Strong and hard

Description : White cast iron is not (A) Malleable (B) Whitish in color (C) Brittle (D) Strong and hard

Last Answer : (A) Malleable

Duriron is (A) Acid resistant, brittle and very hard (B) High silicon iron (C) Prone to breakage due to thermal expansion because of its very high co￾efficient of thermal expansion (D) All (A), (B) and (C)

Description : Duriron is (A) Acid resistant, brittle and very hard (B) High silicon iron (C) Prone to breakage due to thermal expansion because of its very high co￾efficient of thermal expansion (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Very high sulphur in pig iron makes (A) Its casting unsound (B) Its hard and machinable (C) Its brittle and malleable (D) All (A), (B) & (C)

Description : Very high sulphur in pig iron makes (A) Its casting unsound (B) Its hard and machinable (C) Its brittle and malleable (D) All (A), (B) & (C)

Last Answer : (A) Its casting unsound

White cast iron as compared to grey cast iron is (A) More durable (B) Very brittle (C) Very hard (D) All (A), (B) & (C)

Description : White cast iron as compared to grey cast iron is (A) More durable (B) Very brittle (C) Very hard (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

After AT Welding First train is to be passed after ? (i) 20 Minutes from pouring of weld metal. (ii) 35 Minutes from pouring of weld metal. (iii) 30 Minutes from pouring of weld metal.* (iv) 25 Minutes from pouring of weld metal.

Description : After AT Welding First train is to be passed after ? (i) 20 Minutes from pouring of weld metal. (ii) 35 Minutes from pouring of weld metal. (iii) 30 Minutes from pouring of weld metal.* (iv) 25 Minutes from pouring of weld metal.

Last Answer : (iii) 30 Minutes from pouring of weld metal.*

The rocks which are formed due to pouring of magma at the earth's surface are called (A) Plutonic rocks (B) Hypabyssal rocks (C) Volcanic rocks (D) Igneous rocks

Description : The rocks which are formed due to pouring of magma at the earth's surface are called (A) Plutonic rocks (B) Hypabyssal rocks (C) Volcanic rocks (D) Igneous rocks

Last Answer : Answer: Option C

Does pouring bleach into a septic system hurt the septic system?

Description : Does pouring bleach into a septic system hurt the septic system?

Last Answer : answer:Yes, it is bad to do so. Remember that septic tanks work by having cells take the incoming kitchen and bathroom waste and converting that into, well, waste. In other words, the microbes are ... do it. Especially straight bleach. Dilute it with a TON of water. (Septic in my back yard)

Correct sequences of male accessory glands pouring their secretions into urethra :

Description : Correct sequences of male accessory glands pouring their secretions into urethra :

Last Answer : Correct sequences of male accessory glands pouring their secretions into urethra : A. Prostate ... Prostate , Bulbourethral glands , Seminal vesicle

Why did European settlers start pouring into minnesota around 1852?

Description : Why did European settlers start pouring into minnesota around 1852?

Last Answer : to have shrex

Which stress strain curve is more steep (a) For a ductile material (b) For a brittle material (c) For a pure metal (d) None

Description : Which stress strain curve is more steep (a) For a ductile material (b) For a brittle material (c) For a pure metal (d) None

Last Answer : b) For a brittle material

Why are ionic solids hard and brittle?

Description : Why are ionic solids hard and brittle?

Last Answer : Ionic solids are brittle and hard as they are bonded with electrostatic bonds.

Why are ionic solids hard and brittle?

Description : Why are ionic solids hard and brittle?

Last Answer : Ionic solids are brittle and hard as they are bonded with electrostatic bonds.

Thermoplastic resins usually(A) Remain hard as long as they are hot(B) Cannot be reclaimed from waste(C) Permanent setting resins(D) Less brittle than thermosetting resins

Description : Thermoplastic resins usually (A) Remain hard as long as they are hot (B) Cannot be reclaimed from waste (C) Permanent setting resins (D) Less brittle than thermosetting resins

Last Answer : (D) Less brittle than thermosetting resins

Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Description : Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Last Answer : (D) Soft

Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Description : Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Last Answer : (D) Soft

Sedimentary rocks are-----? A. Porous (Answer) B. Hard C. Rough D. Brittle E. Volcanic

Description : Sedimentary rocks are-----? A. Porous (Answer) B. Hard C. Rough D. Brittle E. Volcanic

Last Answer : A. Porous (Answer)

The materials which have the same elastic properties in all directions, are called (A) Isotropic (B) Brittle (C) Homogeneous (D) Hard

Description : The materials which have the same elastic properties in all directions, are called  (A) Isotropic  (B) Brittle  (C) Homogeneous  (D) Hard 

Last Answer : (A) Isotropic 

A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Description : A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Last Answer : A) Ductile material

Quartzite, a metamorphic stone is (A) Hard (B) Brittle (C) Crystalline (D) All the above

Description : Quartzite, a metamorphic stone is (A) Hard (B) Brittle (C) Crystalline (D) All the above

Last Answer : Answer: Option D

The substance which undergo plastic deformation until break is a) Brittle b) Ductile c) Hard d) Soft

Description : The substance which undergo plastic deformation until break is a) Brittle b) Ductile c) Hard d) Soft

Last Answer : d) Soft

The substance which break just after elastic limit: a) Ductile b) Brittle c) Soft d) Hard

Description : The substance which break just after elastic limit: a) Ductile b) Brittle c) Soft d) Hard

Last Answer : d) Hard

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Cast iron is a __________ material. (A) Brittle (B) Ductile (C) Tough (D) Malleable

Description : Cast iron is a __________ material. (A) Brittle (B) Ductile (C) Tough (D) Malleable

Last Answer : (A) Brittle

Cast iron is (A) Used for making shock resisting parts (B) Manufactured in cupola and is brittle (C) Having compressive strength more than its tensile strength(D) All (A), (B) & (C)

Description : Cast iron is (A) Used for making shock resisting parts (B) Manufactured in cupola and is brittle (C) Having compressive strength more than its tensile strength (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Steel produced from phosphatic iron is __________ in nature. (A) Malleable (B) Ductile (C) Brittle (D) Tough

Description : Steel produced from phosphatic iron is __________ in nature. (A) Malleable (B) Ductile (C) Brittle (D) Tough

Last Answer : (C) Brittle

Why is the threat of Omicron taken so differently from Fentanyl that is pouring across the southern border?

Description : Why is the threat of Omicron taken so differently from Fentanyl that is pouring across the southern border?

Last Answer : I haven’t received my fentanyl booster yet, so I’m quite scared of catching fentanyl. But I do wear a mask at the market, so I’m hoping I don’t catch fentanyl!

Has anyone heard of pouring car engine degreaser down your drains to keep them from clogging?

Description : Has anyone heard of pouring car engine degreaser down your drains to keep them from clogging?

Last Answer : I have not heard of using a car engine degreaser to keep drains open. However, upon the suggestion of my city's sewer department we have been using Dawn dishwashing detergent for this purpose ... -cup down the kitchen sink on the disposal side to keep emulsification from clogging the drain lines.

After pouring concrete, what material should be used to fill the gap left by the forms?

Description : After pouring concrete, what material should be used to fill the gap left by the forms?

Last Answer : answer:What's the purpose? Car park? I would vote for pea gravel. The ground will heave and swell and shrink, and the drainage might be better. If it were my gravel and concrete would throw ... topsoil as a carrier under the gravel. Daisies,bluets, black-eyed Susans and Shirley poppies might pop up.

In a bread machine, what is an important "extra" to add when pouring the mix in?

Description : In a bread machine, what is an important "extra" to add when pouring the mix in?

Last Answer : Lurve.

George walked for thirty minutes in the pouring rain without getting a single hair on his head wet. He didn't have a hat or an umbrella and his coat had no hood.How did he do that? -Riddles

Description : George walked for thirty minutes in the pouring rain without getting a single hair on his head wet. He didn't have a hat or an umbrella and his coat had no hood.How did he do that? -Riddles

Last Answer : He was bald.

Which statement is the negation of the following statementThe rain is pouring down.?

Description : Which statement is the negation of the following statementThe rain is pouring down.?

Last Answer : The rain is not pouring down.

Sodium fire in laboratory should not be extinguished by pouring water.Why?

Description : Sodium fire in laboratory should not be extinguished by pouring water.Why?

Last Answer : Ans. Sodium reacts violently with water producing hydrogen gas which also catches fire.Instead of water pyrene should be used.

Leakage in a cooking gas cylinder is detected by (A) Radio-isotopes (B) Pouring soap solution on the surface and locating the gas bubbles (C) Halide torch (D) Pungent smell of mercaptans present in the gas

Description : Leakage in a cooking gas cylinder is detected by (A) Radio-isotopes (B) Pouring soap solution on the surface and locating the gas bubbles (C) Halide torch (D) Pungent smell of mercaptans present in the gas

Last Answer : Option D

For providing a raft foundation, the following activities are involved 1. Ramming the foundation bed 2. Excavation of the soil upto required depth 3. Laying the reinforcement over the foundation bed 4. Curing the cement concrete placed over reinforcement 5. Pouring the cement concrete over the reinforcement The correct sequence is (A) 1, 2, 3, 4, 5 (B) 5, 4, 3, 2, 1 (C) 2, 1, 3, 5, 4 (D) 3, 2, 5, 1,

Description : For providing a raft foundation, the following activities are involved 1. Ramming the foundation bed 2. Excavation of the soil upto required depth 3. Laying the reinforcement over the foundation bed 4. Curing the cement concrete placed over ... 2, 1 (C) 2, 1, 3, 5, 4 (D) 3, 2, 5, 1, 4

Last Answer : Answer: Option C

How long should acrylic self-cure special trays been made prior to taking impression: A. 12 hrs B. Immediately after fabricating it C. After been left in water for an hour D. Wait for an hour before pouring

Description : How long should acrylic self-cure special trays been made prior to taking impression: A. 12 hrs B. Immediately after fabricating it C. After been left in water for an hour D. Wait for an hour before pouring

Last Answer : A. 12 hrs

Which impression material should NOT be kept in water within on hour: (in another paper it was: 30 mins before pouring) A. Polyether B. Condensation silicone C. Polyvinyl silicone

Description : Which impression material should NOT be kept in water within on hour: (in another paper it was: 30  mins before pouring)  A. Polyether  B. Condensation silicone  C. Polyvinyl silicone 

Last Answer : A. Polyether 

What is the time of removal the tensor from the newly executed A T Weld? (i) 15 minutes after pouring. (ii) 20 minutes after pouring* (iii) 25 minutes after pouring. (iv) 30 minutes after pouring.

Description : What is the time of removal the tensor from the newly executed A T Weld? (i) 15 minutes after pouring. (ii) 20 minutes after pouring* (iii) 25 minutes after pouring. (iv) 30 minutes after pouring.

Last Answer : (ii) 20 minutes after pouring*

The slat type mold board is used in a) Sticky soil b) Hard soil c) Loose soil d) Stoney and trashy soil Ans. a

Description : The slat type mold board is used in a) Sticky soil b) Hard soil c) Loose soil d) Stoney and trashy soil Ans. a

Last Answer : ans a

Statement-1: The reduction of a metal oxide is easier if the metal formed is in liquid state at the temperature of reduction. Statement-2: The value o

Description : Statement-1: The reduction of a metal oxide is easier if the metal formed is in liquid state at the temperature of reduction. Statement-2: The value o

Last Answer : Statement-1: The reduction of a metal oxide is easier if the metal formed is in liquid state at ... . Statement-1 is false but Statement -2 is true

Which of the following molecules or ions is NOT formed when K metal reacts with liquid CH3OH? Is it: w) potassium ion x) hydrogen ion y) methoxy ion z) hydrogen molecule

Description : Which of the following molecules or ions is NOT formed when K metal reacts with liquid CH3OH? Is it: w) potassium ion x) hydrogen ion y) methoxy ion z) hydrogen molecule

Last Answer : ANSWER: X -- HYDROGEN ION

The substance which does not expand on going from liquid state to solid state is – (1) Water (2) Cast-iron (3) Aluminium (4) Type metal

Description : The substance which does not expand on going from liquid state to solid state is – (1) Water (2) Cast-iron (3) Aluminium (4) Type metal

Last Answer : (4) Type metal Explanation: In printing, type metal (sometimes called hot metal) refers to the metal alloys used in traditional type founding and hot metal typesetting. Lead is the main constituent of ... and solidifies in a simple manner at a specific temperature. This is not the case with alloys.

__________ metal is liquid at room temperature . a) mercury b)iron c)copper d)silver

Description : __________ metal is liquid at room temperature . a) mercury b)iron c)copper d)silver

Last Answer : a) mercury

The substance which does not expand on going from liquid state to solid state is (1) Water (2) Cast-iron (3) Aluminium(4) Type metal

Description : The substance which does not expand on going from liquid state to solid state is (1) Water (2) Cast-iron (3) Aluminium(4) Type metal

Last Answer : Type metal 

Metals are generally hard, which of the following metal is an exception and can be cut with a knife? a) iron b)sodium c)gold d)magnesium

Description : Metals are generally hard, which of the following metal is an exception and can be cut with a knife? a) iron b)sodium c)gold d)magnesium

Last Answer : b)sodium

Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its fatigue strength (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Description : Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its ... (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Last Answer : (C) Cold working of a metal decreases its fatigue strength

Uniform flow occurs when (A) The flow is steady (B) The flow is streamline (C) Size and shape of the cross section in a particular length remain constant (D) Size and cross section change uniformly along length

Description : Uniform flow occurs when (A) The flow is steady (B) The flow is streamline (C) Size and shape of the cross section in a particular length remain constant (D) Size and cross section change uniformly along length

Last Answer : Answer: Option C

Building strength into brittle hair?

Description : Building strength into brittle hair?

Last Answer : vitamins high in amino acids

The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Description : The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Last Answer : B) Malleability