The magnitude of heat of solution ….. On addition of solvent to solution

The magnitude of heat of solution ….. On addition of solvent to solution
by

1 Answer

Answer :

The magnitude of heat of solution ….. On addition of solvent to solution A. Decreases B. Increases C. Remains constant D. Increases or decreases
by

Related questions

On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)

Description : On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

lass Ionomer Cement sets because of,** A. Acid-Base reaction B. Addition polymerisation reaction C. Growth of glass crystals D. Slip plane locking E. Solvent evaporation

Description : lass Ionomer Cement sets because of,** A. Acid-Base reaction B. Addition polymerisation reaction C. Growth of glass crystals D. Slip plane locking E. Solvent evaporation

Last Answer : A. Acid-Base reaction

State and prove parallelogram law of vector addition and determine magnitude and direction of resultant vector.

Description : State and prove parallelogram law of vector addition and determine magnitude and direction of resultant vector.

Last Answer : State and prove parallelogram law of vector addition and determine magnitude and direction of resultant vector.

13.a) What is solute and solvent in aerated drinks? b) Given a solution of substance 'A' how will you test whether it is saturated or unsaturated with respect to 'A' at the given temperature. -Chemistry

Description : 13.a) What is solute and solvent in aerated drinks? b) Given a solution of substance 'A' how will you test whether it is saturated or unsaturated with respect to 'A' at the given temperature. -Chemistry

Last Answer : (a) No solute and solvent is available in aerated drinks. (b) in the given solution add small amount of solute A, if A dissolved a daydream a transparent solution is formed then it is an unsaturated solution and if A doesn't dissolved and a precipitate is formed then it's a saturated solution

What is the solvent in a salt solution like brine?

Description : What is the solvent in a salt solution like brine?

Last Answer : Water.

What are the solvent and solute in a solution containing 100 g of ethanol and 3 g of sucrose?

Description : What are the solvent and solute in a solution containing 100 g of ethanol and 3 g of sucrose?

Last Answer : Feel Free to Answer

When a solution contains the most solute that will dissolve in the solvent?

Description : When a solution contains the most solute that will dissolve in the solvent?

Last Answer : Feel Free to Answer

If you have a solution of saltwater. In this solution what is the solvent and what is the solute?

Description : If you have a solution of saltwater. In this solution what is the solvent and what is the solute?

Last Answer : Water is a solvent and salt is a solute and the solution with that is ocean water (salt water).

In a solution of sugar and water which is the solvent and which is the solute?

Description : In a solution of sugar and water which is the solvent and which is the solute?

Last Answer : Water is the solvent, sugar the solute.

What no more solute can be dissolved in the solvent the solution is what?

Description : What no more solute can be dissolved in the solvent the solution is what?

Last Answer : The word you're looking for is..... saturated.

What no more solute can be dissolved in the solvent the solution is what?

Description : What no more solute can be dissolved in the solvent the solution is what?

Last Answer : The word you're looking for is..... saturated.

Why do solute particles have to be mixed with solvent particles in order to create a solution?

Description : Why do solute particles have to be mixed with solvent particles in order to create a solution?

Last Answer : That's basically what "solution" means.

In a potassium nitrate solution, what is the solvent?

Description : In a potassium nitrate solution, what is the solvent?

Last Answer : Water

What forms when a solvent evapourates from a saturated solution?

Description : What forms when a solvent evapourates from a saturated solution?

Last Answer : Crystal

What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Last Answer : B. A solute and a solvent

(1) a homogeneous mixture of two or more substances Explanation: A homogeneous mixture of two or more substances uniformly dispersed throughout a single phase is called solution. In such a mixture, a solute is a substance dissolved in another substance, known as a solvent. The solution more or less takes on the characteristics of the solvent including its phase, and the solvent is commonly the major fraction of the mixture.

Description : (1) a homogeneous mixture of two or more substances Explanation: A homogeneous mixture of two or more substances uniformly dispersed throughout a single phase is called solution. In such a mixture, a ... the solvent including its phase, and the solvent is commonly the major fraction of the mixture.

Last Answer : Choose the incorrect statement pertaining to organic compounds - (1) They have low melting and boiling points (2) They do not dissolve in water (3) They are not easily combustible (4) They contain mainly carbon and hydrogen

Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Description : Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Last Answer : Answer: C

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Last Answer : (C) Aqueous solution (10% water) of diethylene glycol

The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Description : The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Last Answer : (B) Methyl ethyl ketone

The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

. In a solution containing 0.30 Kg mole of solute and 600 kg of solvent, the molality is (A) 0.50 (B) 0.60 (C) 1 (D) 2

Description : . In a solution containing 0.30 Kg mole of solute and 600 kg of solvent, the molality is (A) 0.50 (B) 0.60 (C) 1 (D) 2

Last Answer : (A) 0.50

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Description : Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Last Answer : (A) Solvent extraction

Number of gram of solute per 1000 gm of solvent is called a. Normal solution b. Molar solution c. molal solution d. simple solution

Description : Number of gram of solute per 1000 gm of solvent is called a. Normal solution b. Molar solution c. molal solution d. simple solution

Last Answer : molal solution

Define the following : Solute , Solvent , Solution , Aqueous Solution & Solubility.

Description : Define the following : Solute , Solvent , Solution , Aqueous Solution & Solubility.

Last Answer : Ans : Solute : The component of the solution present in smaller amount is called solute. It is also defined as the substance that gets dissolved in the solvent. Example : Glucose is solute in glucose solution. ... grams / 100 grams. Solubility of sugar in water at 100 degree C is 487 grams/100 ml.

A molar solution is one that contains one mole of a solute in [IIT 1986] (A) 1000 g of the solvent (B) One litre of the solvent (C) One litre of the solution (D) 22.4 litres of the solution

Description : A molar solution is one that contains one mole of a solute in [IIT 1986] (A) 1000 g of the solvent (B) One litre of the solvent (C) One litre of the solution (D) 22.4 litres of the solution

Last Answer : (C) One litre of the solution

During osmosis w) Pure solvent diffuses through a membrane but solutes do not. x) Pure solutes diffuse through a membrane but solvent does not. y) Pure solvent and a solution both diffuse at the same time through a membrane. z) Gases diffuse through a membrane into a solution and build up pressure.

Description : During osmosis w) Pure solvent diffuses through a membrane but solutes do not. x) Pure solutes diffuse through a membrane but solvent does not. y) Pure solvent and a solution both diffuse at the same time through a membrane. z) Gases diffuse through a membrane into a solution and build up pressure. 

Last Answer : ANSWER: W -- PURE SOLVENT DIFFUSES THROUGH A MEMBRANE BUT SOLUTES DO NOT. 

An aqueous solution is always a solution in which the: w) solute is water x) solute is a salt y) solvent is a salt z) solvent is water

Description : An aqueous solution is always a solution in which the: w) solute is water x) solute is a salt y) solvent is a salt z) solvent is water 

Last Answer : ANSWER: Z -- SOLVENT IS WATER

Which of the following properties is lower for a solution than for the pure solvent? w) osmotic pressure x) vapor pressure y) temperature z) boiling point

Description : Which of the following properties is lower for a solution than for the pure solvent? w) osmotic pressure x) vapor pressure y) temperature z) boiling point

Last Answer : ANSWER: X -- VAPOR PRESSURE

Which of the following properties is greater for a solution than for the pure solvent? w) freezing point x) vapor pressure y) temperature z) boiling point

Description : Which of the following properties is greater for a solution than for the pure solvent? w) freezing point x) vapor pressure y) temperature z) boiling point

Last Answer : ANSWER: D -- BOILING POINT

Relative to the pure solvent, the boiling point of a solution is: w) higher x) lower y) at the same temperature

Description : Relative to the pure solvent, the boiling point of a solution is: w) higher x) lower y) at the same temperature

Last Answer : ANSWER: W -- HIGHER

Moles of solute divided by kilograms of solvent is expression for: w) molarity x) solute-to-solution ratio y) mole percentage z) molality

Description : Moles of solute divided by kilograms of solvent is expression for: w) molarity x) solute-to-solution ratio y) mole percentage z) molality

Last Answer : ANSWER: Z -- MOLALITY

HCl is dissolved in solvent A; the solution is non-conducting towards an electric current. Solvent A must be: w) polar x) non-polar y) organic z) more acidic than HCl

Description : HCl is dissolved in solvent A; the solution is non-conducting towards an electric current. Solvent A must be: w) polar x) non-polar y) organic z) more acidic than HCl

Last Answer : ANSWER: X -- NON-POLAR

Normality is defined as the number of: w) moles of solute per 1000 grams of solvent x) equivalent weights of solute per liter of solution y) kilograms of solute per liter of solution z) moles of solute per 1000 grams of solution

Description : Normality is defined as the number of: w) moles of solute per 1000 grams of solvent x) equivalent weights of solute per liter of solution y) kilograms of solute per liter of solution z) moles of solute per 1000 grams of solution

Last Answer : ANSWER: X -- EQUIVALENT WEIGHTS OF SOLUTE PER LITER OF SOLUTION

Water is a good solvent of ionic salts because - (1) It has no colour (2) It has a boiling point (3) It has a high dipole moment (4) It has a high specific heat

Description : Water is a good solvent of ionic salts because - (1) It has no colour (2) It has a boiling point (3) It has a high dipole moment (4) It has a high specific heat

Last Answer : (3) It has a high dipole moment

If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry in an oven C. soak it in a bucket of commercial solvent and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Description : If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry ... and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Last Answer : Answer: B

Before working on an electric cargo winch master switch or controller, you should _____________. A. spray the gasket surface with a solvent B. drain condensate from the box C. open the circuit breaker in the power supply and tag D. heat the switch box to remove any moisture

Description : Before working on an electric cargo winch master switch or controller, you should _____________. A. spray the gasket surface with a solvent B. drain condensate from the box C. open the circuit breaker in the power supply and tag D. heat the switch box to remove any moisture

Last Answer : Answer: C

To repair a small electrical motor that has been submerged in saltwater, you should _____________. A. wash it with fresh water and apply an external source of heat B. renew the windings C. send it ashore to an approved service facility D. rinse all electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air

Description : To repair a small electrical motor that has been submerged in saltwater, you should _____________. A. wash it with fresh water and apply an external source of heat B. renew the windings ... electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air

Last Answer : Answer: A

Thermosetting materials (A) Are cross-linked molecules (B) Soften on application of heat (C) Are solvent soluble (D) None of these

Description : Thermosetting materials (A) Are cross-linked molecules (B) Soften on application of heat (C) Are solvent soluble (D) None of these

Last Answer : (A) Are cross-linked molecules

Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Description : Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Last Answer : (D) None of these

Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available (B) One of the liquid components is heat sensitive (C) Viscosity of liquid components is very high (D) One of the liquid components has very high affinity towards the solvent

Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent

Last Answer : (D) One of the liquid components has very high affinity towards the solvent

When the solvent dissolves very little of solute, then (A) Solvent of low latent heat of vaporisation should be used (B) Solvent of low freezing point should be used (C) Large quantity of solvent is required to extract the solute (D) Very small quantity of solvent is required

Description : When the solvent dissolves very little of solute, then (A) Solvent of low latent heat of vaporisation should be used (B) Solvent of low freezing point should be used (C) Large quantity of solvent is required to extract the solute (D) Very small quantity of solvent is required

Last Answer : (C) Large quantity of solvent is required to extract the solute

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Thermosetting materials (A) Are cross-linked molecules (B) Soften on application of heat (C) Are solvent soluble (D) None of these

Description : Thermosetting materials (A) Are cross-linked molecules (B) Soften on application of heat (C) Are solvent soluble (D) None of these

Last Answer : (A) Are cross-linked molecules

Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Description : Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Last Answer : (D) None of these