Locking the apartment to one west

I've been locking apartment doors to only one west for several years, isn't that wrong? I just do it. Does a thief get there better than when he's locked in two?
by

1 Answer

Answer :

It will more or less be the same. It will only get a little worse when you open the door. But by knocking on the door, he usually doesn't steal at all today.
by

Related questions

Locking your mouth shut as a method of losing weight. What could possibly go wrong?

Description : Locking your mouth shut as a method of losing weight. What could possibly go wrong?

Last Answer : Sneezing.

How do you undo excess oil resulting in the locking mechanism no longer working?

Description : How do you undo excess oil resulting in the locking mechanism no longer working?

Last Answer : All I can think of is keep turning the wheels until the clicking starts or stops depending on which one is the problem. And be patient. Don’t rush it.

If all of humanity were to be instantly and irreversibly sterilised tomorrow, locking in biological extinction for the species, how long would it take for humans to turn themselves into robots?

Description : If all of humanity were to be instantly and irreversibly sterilised tomorrow, locking in biological extinction for the species, how long would it take for humans to turn themselves into robots?

Last Answer : I’m not sure “robots” is the term. The better question is “how long would it take humans to turn into wild animals?” 30 days or less.

Have you seen the self locking shopping carts in your local shopping store?

Description : Have you seen the self locking shopping carts in your local shopping store?

Last Answer : Never saw those. I guess in certain areas, shopping cart theft is a big problem.

Do you have a locking gas cap on your vehicle, and if not, why not?

Description : Do you have a locking gas cap on your vehicle, and if not, why not?

Last Answer : I have a 10.6 gallon fuel tank. If someone is crafty enough to want to pry open my cap cover, get to the cap and steal my gasoline, I have to admit – I’d be impressed. And then I’d move.

Where can I get a locking box to use in my refrigerator?

Description : Where can I get a locking box to use in my refrigerator?

Last Answer : Have you tried disguising the food as something else? What does he hate? Use an empty container or wrapper to hide it.

Any suggestions for a large locking box?

Description : Any suggestions for a large locking box?

Last Answer : answer:A camp trunk? Here I still have mine from decades agp; it is useful for storage even though I probably lost the key in 1954. Or a foot locker here

Is it possible to fit a remote locking system to a central locking car door?

Description : Is it possible to fit a remote locking system to a central locking car door?

Last Answer : According to this item, you can if you have power locks. A woman at work had remote start added to her 1997 Honda Civic, which is also a nice feature. She can start her car in the driveway in the morning to warm it up, without having to go out and start the engine. Her son installed it for her.

My jaw keeps locking and seems to pop-out when I try to open my mouth to eat or speak, is this serious or will it go away?

Description : My jaw keeps locking and seems to pop-out when I try to open my mouth to eat or speak, is this serious or will it go away?

Last Answer : Yeah, I have this. For me, it never went away. Mine is caused by my clenching/grinding at night, so if I were you, talk about it with your dentist next time you're there. You may be clenching at ... , or help you out with the clenching. It could get worse, so talk the dentist as soon as you can.

Does locking your door really prevent break-ins?

Description : Does locking your door really prevent break-ins?

Last Answer : this is just common sense answer ... but people probably first started locking doors for privacy reasons ... especially seeing as how people have more tendency to lock doors in cities than in country-side (may not ... (doesn't mean you won't, but less likely is better than nothing, right?) ... ^_^

what is the purpose of locking the sim card?

Description : what is the purpose of locking the sim card?

Last Answer : Don’t worry about it…

Why are all wireless router companies locking their routers by default now?

Description : Why are all wireless router companies locking their routers by default now?

Last Answer : I live in the twin cites any where in the cites they have wifi

When I open my iChat the buddy list rapidly scrolls down and up many times before locking me out, ever had this issue?

Description : When I open my iChat the buddy list rapidly scrolls down and up many times before locking me out, ever had this issue?

Last Answer : VV Seems jp solved it VV

For a self locking lifting machine, the efficiency must be a.50 percent b.100 percent c.more than 50 percent d.107 dynes e.less than 50 percent

Description : For a self locking lifting machine, the efficiency must be a.50 percent b.100 percent c.more than 50 percent d.107 dynes e.less than 50 percent

Last Answer : e. less than 50 percent

Suppose you want to send in the mail a valuable object to a friend. You have a box which is big enough to hold the object. The box has a locking ring which is large enough to have a lock attached and you have several locks with keys. However, your friend does not have the key to any lock that you have. You cannot send the key in an unlocked box since it may be stolen or copied. How do you send the valuable object, locked, to your friend - so it may be opened by your friend? -Riddles

Description : Suppose you want to send in the mail a valuable object to a friend. You have a box which is big enough to hold the object. The box has a locking ring which is large enough to have a lock attached ... you send the valuable object, locked, to your friend - so it may be opened by your friend? -Riddles

Last Answer : Send the box with a lock attached and locked. Your friend attaches his or her own lock and sends the box back to you. You remove your lock and send it back to your friend. Your friend may then remove the lock she or he put on and open the box.

You want to send a valuable object to a friend. You have a box which is more than large enough to contain the object. You have several locks with keys. The box has a locking ring which is more than large enough to have a lock attached. But your friend does not have the key to any lock that you have. How do you do it? Note that you cannot send a key in an unlocked box, since it might be copied. -Riddles

Description : You want to send a valuable object to a friend. You have a box which is more than large enough to contain the object. You have several locks with keys. The box has a locking ring which is more than ... do it? Note that you cannot send a key in an unlocked box, since it might be copied. -Riddles

Last Answer : Attach a lock to the ring. Send it to her. She attaches her own lock and sends it back. You remove your lock and send it back to her. She removes her lock.

Suppose you want to send in the mail a valuable object to a friend. You have a box which is big enough to hold the object. The box has a locking ring which is large enough to have a lock attached and you have several locks with keys. However, your friend does not have the key to any lock that you have. You cannot send the key in an unlocked box since it may be stolen or copied. How do you send the valuable object, locked, to your friend - so it may be opened by your friend? -Riddles

Description : Suppose you want to send in the mail a valuable object to a friend. You have a box which is big enough to hold the object. The box has a locking ring which is large enough to have a lock attached ... you send the valuable object, locked, to your friend - so it may be opened by your friend? -Riddles

Last Answer : Send the box with a lock attached and locked. Your friend attaches his or her own lock and sends the box back to you. You remove your lock and send it back to your friend. Your friend may then remove the lock she or he put on and open the box.

Tell us about the fingerprint locking app. ? I want to give a fingerprint lock on my mother's phone so that the app will print 3/4 people and it will open after any one print . If so, say the name of any nearby app.

Description : Tell us about the fingerprint locking app. ? I want to give a fingerprint lock on my mother's phone so that the app will print 3/4 people and it will open after any one print . If so, say the name of any nearby app.

Last Answer : There are no such apps on Play Store or any other web The ones that are there work on everyone's fingers Thanks

Write the process of locking and unlocking an object ?

Description : Write the process of locking and unlocking an object ?

Last Answer : The process of locking and unlocking objects is as follows: After creating many round , oval , square and rectangular objects, to lock the object, you have to select a specific object. You need to ... give the unlock all command from the object menu. All locked objects will be unlocked or unlocked.

Inoperative lights and central locking

Description : What could it be, please, the turn signal lights, high beam lights on my car have stopped working out of nowhere, and on the contrary, the handbrake is on again. At the same time, the central locking system has stopped working and one door cannot be locked even manually.

Last Answer : Wiring fault. Visit the service.

samsung galaxy s3 gt i9300 immediately after switching on, it locks on the locking surface and nothing goes wrong with it .. not even the three-button works, it also cuts

Description : I really don't know what to do with what the repair or the price would be ... I don't understand the phones at all Thank you in advance

Last Answer : How long have you had your mobile? I have experience with Samsung that after about a year and a half it will get stuck. If this happens, it helps me remove the back cover with the battery for a while ... again. If the locking area remained on the display, I would take it for service, I have no idea.

Is central locking one hundred percent?

Description : I have a new car with central locking, but anyway, when I lock it, I'll go around it and check if all the doors are locked. Am I doing it unnecessarily?

Last Answer : Yes, it's useless.

Are there any office chairs with locking wheels for use on carpet?

Description : Are there any office chairs with locking wheels for use on carpet?

Last Answer : I thought most do. The one I got from Staples does.

where can I get used glass locking display cases in Myrtle Beach,SC?

Description : where can I get used glass locking display cases in Myrtle Beach,SC?

Last Answer : You can find the glass locking display cases at your local hardware store such as a Home Depot or a lowes

Vapour lock is a. complete or partial stoppage of fuel supply due to vaporization of the fuel b. locking of carburetor due to high vapor pressure c. excess fuel supply to the engine d. supply of liquid fuel to the engine

Description : Vapour lock is a. complete or partial stoppage of fuel supply due to vaporization of the fuel b. locking of carburetor due to high vapor pressure c. excess fuel supply to the engine d. supply of liquid fuel to the engine

Last Answer : ANSWER a. complete or partial stoppage of fuel supply due to vaporization of the fuel

The greatest erosive power of a river is associated with – (1) gorges (2) meanders (3) inter-locking spurs (4) V-shaped valley

Description : The greatest erosive power of a river is associated with – (1) gorges (2) meanders (3) inter-locking spurs (4) V-shaped valley

Last Answer : (2) meanders Explanation: Erosive power of a stream is proportional to the square of the velocity. Thus, when discharge increases, the depth increases and the velocity increases, resulting in dramatic ... on the outer bank erodes a deeper channel. The result of all these actions is a meander

Which of the following is/are true concerning electric power operated watertight door systems? A. Each motor driven door must use the main bus as its source of power. B. Each distribution panel for the system must be on the lowest level where berthing quarters are located. C. Distribution panels must not be provided with a means of locking in order to permit quick activation of the system. D. Each system must have a separate branch circuit.

Description : Which of the following is/are true concerning electric power operated watertight door systems? A. Each motor driven door must use the main bus as its source of power. B. Each distribution panel for ... to permit quick activation of the system. D. Each system must have a separate branch circuit.

Last Answer : Answer: D

what are key-mode and locking mode properties? level ?

Description : what are key-mode and locking mode properties? level ?

Last Answer : Key Mode : Specifies how oracle forms uniquely identifies rows in the database.This is property includes for application that will run against NON-ORACLE datasources . Key setting unique (default.) ... locks on rows that correspond to queried records in the form. a) immediate b) delayed

Locking on to a defined target is known as A. Homing B. Referencing C. Searching D. Defining

Description : Locking on to a defined target is known as A. Homing B. Referencing C. Searching D. Defining

Last Answer : A. Homing

Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Description : Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Last Answer : (C) Vapour locking tendency

Boiling range of motor gasoline is an indication of the (A) Case of starting (B) Rate of acceleration (C) Vapour locking tendency (D) All (A), (B) and (C)

Description : Boiling range of motor gasoline is an indication of the (A) Case of starting (B) Rate of acceleration (C) Vapour locking tendency (D) All (A), (B) and (C)

Last Answer : (B) Rate of acceleration

Which of the following help in accomplishing the locking? a) Creating supplementary friction b) Using special locking devices like split pins c) By plastic deformation d) All of the listed

Description : Which of the following help in accomplishing the locking? a) Creating supplementary friction b) Using special locking devices like split pins c) By plastic deformation d) All of the listed

Last Answer : d) All of the listed

Which of the following is not a function of washer? a) Distributes load over a large area of clamped parts b) Provides bearing surface over large clearance bolts c) Prevents marring of the bolt head and nut surface d) Helps in locking of the fastener

Description : Which of the following is not a function of washer? a) Distributes load over a large area of clamped parts b) Provides bearing surface over large clearance bolts c) Prevents marring of the bolt head and nut surface d) Helps in locking of the fastener

Last Answer : d) Helps in locking of the fastener

Maximum possible efficiency of a self-locking screw is a) 50% b) 75% c) 66% d) 33%

Description : Maximum possible efficiency of a self-locking screw is a) 50% b) 75% c) 66% d) 33%

Last Answer : a) 50%

Self-locking takes place when a) Coefficient of friction is equal to or greater than the tangent of the helix angle b) Coefficient of friction is lesser than or equal to the tangent of the helix angle c) Coefficient of friction is equal to or greater than the tangent of the helix angle d) None of the mentioned

Description : Self-locking takes place when a) Coefficient of friction is equal to or greater than the tangent of the helix angle b) Coefficient of friction is lesser than or equal to the tangent of the helix ... friction is equal to or greater than the tangent of the helix angle d) None of the mentioned

Last Answer : c) Coefficient of friction is equal to or greater than the tangent of the helix angle

Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface

Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut

What is magnetic locking or cogging effect of induction motor?

Description : What is magnetic locking or cogging effect of induction motor?

Last Answer : In squirrel cage induction motor some times the rotor and stator care teeth or slots are comes face to face or parallel at stationary condition. If we are starting the motor at this condition the motor ... the rotor slot, such that there is no common factor between the rotor slot and stator slots.

The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Description : The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

_______ in GAE provides coarse-grained locking service a) Bigtable b) Chubby c) MapReduce d) GFS

Description : _______ in GAE provides coarse-grained locking service a) Bigtable b) Chubby c) MapReduce d) GFS

Last Answer : Chubby

Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Description : Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Last Answer : (C) Spark plug fouling

What’s the primary advantage of a anti- lock braking system a) They allow you to stop easier b) They prevent locking c) They allow you to steer while braking

Description : What’s the primary advantage of a anti- lock braking system a) They allow you to stop easier b) They prevent locking c) They allow you to steer while braking

Last Answer : c) They allow you to steer while braking

TMJ dysfunction common symptom is, A. Clicking B. Locking C. Pain in the muscles of mastication

Description : TMJ dysfunction common symptom is,  A. Clicking  B. Locking  C. Pain in the muscles of mastication 

Last Answer : C. Pain in the muscles of mastication 

lass Ionomer Cement sets because of,** A. Acid-Base reaction B. Addition polymerisation reaction C. Growth of glass crystals D. Slip plane locking E. Solvent evaporation

Description : lass Ionomer Cement sets because of,** A. Acid-Base reaction B. Addition polymerisation reaction C. Growth of glass crystals D. Slip plane locking E. Solvent evaporation

Last Answer : A. Acid-Base reaction

____ is used latching, locking, triggering. A. Solenoid B. Relay C. Linear Actuator D. Servo motors

Description : ____ is used latching, locking, triggering. A. Solenoid B. Relay C. Linear Actuator D. Servo motors

Last Answer : A. Solenoid 

Which of the following concurrency protocol ensures both conflict serializability and freedom from deadlock : I. 2-phase locking II. Time phase ordering (A) Both I & II (B) II only (C) I only (D) Neither I nor II

Description : Which of the following concurrency protocol ensures both conflict serializability and freedom from deadlock : I. 2-phase locking II. Time phase ordering (A) Both I & II (B) II only (C) I only (D) Neither I nor II

Last Answer : (B) II only

Which of the following concurrency protocol ensures both conflict serializability and freedom from deadlock ? (a) 2-phase Locking (b) Time stamp - ordering (A) Both (a) and (b) (B) (a) only (C) (b) only (D) Neither (a) nor (b)

Description : Which of the following concurrency protocol ensures both conflict serializability and freedom from deadlock ? (a) 2-phase Locking (b) Time stamp - ordering (A) Both (a) and (b) (B) (a) only (C) (b) only (D) Neither (a) nor (b)

Last Answer : (C) (b) only

The greatest erosive power of a river is associated with (1) gorges (2) meanders (3) inter-locking spurs (4) V-shaped valley

Description : The greatest erosive power of a river is associated with (1) gorges (2) meanders (3) inter-locking spurs (4) V-shaped valley

Last Answer : meanders