Depends on the heat absorption capacity of the object ???

by

1 Answer

Answer :

: The heat absorption capacity of an object depends on the color.
by

Related questions

Which colored object has higher heat absorption capacity ?

Last Answer : " Black" material has high heat absorption capacity.

Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Description : Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Last Answer : (C) Decrease in equilibrium solubility

At a fixed total pressure, humidity depends only on the (A) Partial pressure of vapour in the mixture (B) Heat capacity of the vapour (C) Density of the vapour (D) None of these

Description : At a fixed total pressure, humidity depends only on the (A) Partial pressure of vapour in the mixture (B) Heat capacity of the vapour (C) Density of the vapour (D) None of these

Last Answer : (A) Partial pressure of vapour in the mixture

What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K?  A. Heat capacity  B. Specific heat  C. Latent heat  D. Molar heat

Description : What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K?  A. Heat capacity  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Heat capacity

The absorption of radio waves by the atmosphere depends on which thing? -General Knowledge

Description : The absorption of radio waves by the atmosphere depends on which thing? -General Knowledge

Last Answer : The answer is 'Their frequency'

The absorption of radio waves by the atmosphere depends on which thing? -General Knowledge

Description : The absorption of radio waves by the atmosphere depends on which thing? -General Knowledge

Last Answer : frequency The absorption of radio waves by the atmosphere depends on their frequency.

The absorption of radio waves by the atmosphere depends on which thing?

Description : The absorption of radio waves by the atmosphere depends on which thing?

Last Answer : Their frequency

Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Description : Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Last Answer : (C) Solubility

In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Description : In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Last Answer : (B) Smaller than

Passive absorption of minerals depends on (a) temperature (b) temperature and metabolic inhibitor (c) metabolic inhibitor (d) humidity

Description : Passive absorption of minerals depends on (a) temperature (b) temperature and metabolic inhibitor (c) metabolic inhibitor (d) humidity

Last Answer : (a) temperature

The optical property of a water body depends on: (A) Absorption by the dissolved material (B) Absorption by the suspended particulate matter (C) Scattering by the suspended particulate matter (D) All of these

Description : The optical property of a water body depends on: (A) Absorption by the dissolved material (B) Absorption by the suspended particulate matter (C) Scattering by the suspended particulate matter (D) All of these

Last Answer : Answer: Option D

The absorption ofradiowaves bythe atmosphere depends on a. their frequency b. their distance from the transmitter c. the polarization of the waves d. the polarization of the atmosphere

Description : The absorption ofradiowaves bythe atmosphere depends on a. their frequency b. their distance from the transmitter c. the polarization of the waves d. the polarization of the atmosphere

Last Answer : a. their frequency

The success of oral rehydration therapy of diarrhoea depends upon the following process in the intestinal mucosa: A. Sodium pump mediated Na+ absorption B. Glucose coupled Na+ absorption C. Bicarbonate coupled Na+ absorption D. Passive Na+ diffusion secondary to nutrient absorption

Description : The success of oral rehydration therapy of diarrhoea depends upon the following process in the intestinal mucosa: A. Sodium pump mediated Na+ absorption B. Glucose coupled Na+ absorption C. Bicarbonate coupled Na+ absorption D. Passive Na+ diffusion secondary to nutrient absorption

Last Answer : B. Glucose coupled Na+ absorption

12. What is characteristic of the oral route? a) Fast onset of effect b) Absorption depends on GI tract secretion and motor function c) A drug reaches the blood passing the liver d) The sterilization of medicinal forms is obligatory

Description : 12. What is characteristic of the oral route? a) Fast onset of effect b) Absorption depends on GI tract secretion and motor function c) A drug reaches the blood passing the liver d) The sterilization of medicinal forms is obligatory

Last Answer : b) Absorption depends on GI tract secretion and motor function

Sparking at the brushes of a running motor could be an indication of _____________. A. normal operation B. a dirty commutator C. increased brush capacity D. water vapor absorption

Description : Sparking at the brushes of a running motor could be an indication of _____________. A. normal operation B. a dirty commutator C. increased brush capacity D. water vapor absorption

Last Answer : Answer: B

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

Nylon-6, 10 which is used for bristles making is superior to nylon 6, 6 due to its lower water absorption capacity, is a/an (A) Polyester (B) Polyamide (C) Polyisopren

Description : Nylon-6, 10 which is used for bristles making is superior to nylon 6, 6 due to its lower water absorption capacity, is a/an (A) Polyester (B) Polyamide (C) Polyisopren

Last Answer : (B) Polyamide

Slate (A) Is a metamorphic rock (B) Splits into thin sheets along its bedding planes (C) Has a smooth surface and contains alumina and silica (D) Possesses good water absorption capacity

Description : Slate (A) Is a metamorphic rock (B) Splits into thin sheets along its bedding planes (C) Has a smooth surface and contains alumina and silica (D) Possesses good water absorption capacity

Last Answer : Answer: Option A

The following is true of aluminium hydroxide gel except: A. It is a weak and slowly reacting antacid B. Its acid neutralizing capacity decreases on storage C. It interferes with absorption of phosphate in the intestine D. It causes loose motions as a side effect

Description : The following is true of aluminium hydroxide gel except: A. It is a weak and slowly reacting antacid B. Its acid neutralizing capacity decreases on storage C. It interferes with absorption of phosphate in the intestine D. It causes loose motions as a side effect

Last Answer : D. It causes loose motions as a side effec

Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on the initial velocity ( v 0 ) and the braking capacity, or deceleration, ?a that is caused by the braking. A car travelling at speed 72km/hr suddenly applies the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Description : Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on ... the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Last Answer : Here u=72 km/hr = 72×10003600m/s=2072×10003600m/s=20 m/s , v=0 a= -5 m/s2 Now using the relation v2=u2+2asv2=u2+2as 0=(20)2+2×(−5)×s0=(20)2+2×(−5)×s s=40ms=40m

Storage capacity of magnetic disk depends on A) tracks per inch of surface B) bits per inch of tracks C) disk pack in disk surface D) All of above

Description : Storage capacity of magnetic disk depends on A) tracks per inch of surface B) bits per inch of tracks C) disk pack in disk surface D) All of above

Last Answer : Answer : D

The capacity of an antihistaminic to produce sedation depends on the following except (a) Relative affinity for central versus peripheral H1 receptors (b) Ability to penetrate blood-brain barrier (c) Individual susceptibility (d) Ratio of H1 : H2 blockade produced by the drug

Description : The capacity of an antihistaminic to produce sedation depends on the following except (a) Relative affinity for central versus peripheral H1 receptors (b) Ability to penetrate blood-brain barrier (c) Individual susceptibility (d) Ratio of H1 : H2 blockade produced by the drug

Last Answer : Ans: D

The capacity of a pneumatic conveying system depends upon the (A) Bulk density of materials (B) Pressure of the conveying air (C) Diameter of the conveying line (D) All (A), (B) and (C)

Description : The capacity of a pneumatic conveying system depends upon the (A) Bulk density of materials (B) Pressure of the conveying air (C) Diameter of the conveying line (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Description : The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Last Answer : (A) Speed

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

What are the factors on which the capacity of the battery depends?

Description : What are the factors on which the capacity of the battery depends?

Last Answer : The capacity of the battery is measured in ampere-hour. The capacity of the battery depends upon the following factors. a. Number and area of the positive plate. b. Discharge voltage ... . Temperature. When the temperature increases the resistance of the battery decreases and the capacity increases.

What is capacitor? On what factor capacity of a capacitor depends?

Description : What is capacitor? On what factor capacity of a capacitor depends?

Last Answer : Capacitor or condenser is a device to store electrical energy and to release it into the circuit of which the capacitor forms a part. Capacity of a capacitor depends on following factors a. Capacity ... the distance is less the capacity more. c. It depends on the nature of dielectric constant. 

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : Surface

Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Description : Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Last Answer : All of above

The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Description : The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Description : The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Last Answer : c. Both (a) and (b)

Horsepower requirement for given pump capacity depends upon the (A) Specific gravity of the liquid (B) Suction lift (C) Discharge head (D) All (A), (B) and (C)

Description : Horsepower requirement for given pump capacity depends upon the (A) Specific gravity of the liquid (B) Suction lift (C) Discharge head (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Allowable bearing pressure for a foundation depends upon (A) Allowable settlement only (B) Ultimate bearing capacity of soil only (C) Both allowable settlement and ultimate bearing capacity (D) None of above

Description : Allowable bearing pressure for a foundation depends upon (A) Allowable settlement only (B) Ultimate bearing capacity of soil only (C) Both allowable settlement and ultimate bearing capacity (D) None of above

Last Answer : (C) Both allowable settlement and ultimate bearing capacity

Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a soil depends upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Description : Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a ... upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Last Answer : Answer: Option A

The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Description : The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Last Answer : Answer: Option D

Capacity & power requirement for an air compressor working at high altitude compared to sea-level will be (A) More (B) Less (C) Same (D) Either more or less; depends on the climatic conditions

Description : Capacity & power requirement for an air compressor working at high altitude compared to sea-level will be (A) More (B) Less (C) Same (D) Either more or less; depends on the climatic conditions

Last Answer : (B) Less

Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Description : Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Last Answer : Answer: Option D

The traffic carrying capacity of a single lane, depends on (A) Type of the vehicles (B) Level crossings (C) Road intersections (D) All the above

Description : The traffic carrying capacity of a single lane, depends on (A) Type of the vehicles (B) Level crossings (C) Road intersections (D) All the above

Last Answer : Answer: Option D

The charging time depends on which of the following factor? • Battery size • Battery capacity Size of vehicle • Voltage of batery

Description : The charging time depends on which of the following factor? • Battery size • Battery capacity Size of vehicle • Voltage of batery

Last Answer : • Battery capacity

The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Description : The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Last Answer : (c) Voltage

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Description : Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Last Answer : d. All of above

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Description : The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Last Answer : a) Shearing strength of soil and its angle of repose*

Water holding capacity of land depends on ?

Description : 13. Water holding capacity of land depends on ? (a) Soil composition (b) Grain size (c) Aggregation of grain (d) All of these

Last Answer : (d) All of these

The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Description : The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Last Answer : D. Ratio of H1:H2 blockade produced by the drug

The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Description : The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Last Answer : D. Ratio of H1:H2 blockade produced by the drug

If the population growth follows a logistic curve, the maximum sustainable yield: (A) is equal to half the carrying capacity. (B) is equal to the carrying capacity. (C) depends on growth rates. (D) depends on the initial population.

Description : If the population growth follows a logistic curve, the maximum sustainable yield: (A) is equal to half the carrying capacity. (B) is equal to the carrying capacity. (C) depends on growth rates. (D) depends on the initial population.

Last Answer : (A) is equal to half the carrying capacity.