Description : The point at which the solid, liquid and gaseous forms of a substance co-exist is called its (a) boiling point (b) melting point (c) triple point (d) freezing point
Last Answer : Ans:(c)
Description : The point at which the solid, liquid and gaseous forms of a substance co-exist is called its (a) Boiling point (b) Melting point (c) Triple point (d) Freezing point
Description : What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state? A. Heat of fusion B. Heat of vaporation C. Heat of condensation D. Heat of fission
Last Answer : Heat of vaporation
Description : The direction of heat flow between two objects depends on - (1) Their masses (2) Their heat contents (3) Their temperatures (4) Whether they are in solid, liquid or gaseous state
Last Answer : (3) Their temperatures Explanation: Heat always flows from a body at higher temperature to a body at a lower temperature.
Description : What is the unique state at which solid, liquid and gaseous phase can go co-exist in equilibrium? a. Triple point b. Critical point c. Boiling point d. Pour point
Last Answer : Triple point
Description : Name the methods for disposal of solid, liquid and gaseous waste. -SST 10th
Last Answer : Solid waste disposal methods: dumping, incineration, composting. Liquid waste disposal methods: grit chamber, sedimentation, digestion and drying. Gaseous waste disposal methods: air scrubbers and electrostatic precipitators.
Description : What is the common names for solid liquid and gaseous states of water?
Last Answer : solid = iceliquid = watergaseous = water vapour
Description : Most substances are more dense in their solid form than in their liquid or gaseous form. What makes the solid phase more dense?
Last Answer : Solid has more energy
Description : Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock
Last Answer : (A) Type of fuels viz. solid, liquid or gaseous
Description : Bomb calorimeter is used for the determination of calorific value of the __________ fuels. (A) Gaseous (B) Solid (C) Liquid (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : The optimum percentage of excess air for combustion depends upon the__________ of the fuel. (A) Type (solid, liquid or gaseous) (B) Calorific value (C) Sulphur content (D) Ignition temperature
Last Answer : (A) Type (solid, liquid or gaseous)
Description : Wobbe index' is a characteristic of (A) Solid fuels (B) Gaseous fuels (C) Liquid fuels (D) Fat coals
Last Answer : (B) Gaseous fuels
Description : In the context of the chemical process industries, the term BOD is normally associated with the (A) Characterisation of solid wastes (B) Organic concentration in gaseous effluents (C) Characterisation of liquid effluents (D) Characterisation of boiler feed water
Last Answer : (C) Characterisation of liquid effluents
Description : One of the methods of purification of leach liquor is ion exchange, which involves (A) Exchange between two liquid phases (B) Exchange between a gaseous phase and a liquid phase (C) Exchange between a liquid phase and an organic resin phase (D) Exchange between a solid phase and a gas phase
Last Answer : (C) Exchange between a liquid phase and an organic resin phase
Description : A stable interface between solid _________ liquid ____________ and gaseous ___________ promotes high rate of electrode processes. a) Fuel, electrolyte, electrode b) Electrode, fuel, electrolyte c) Electrode, electrolyte, fuel d) Fuel, electrode, electrolyte
Last Answer : c) Electrode, electrolyte, fuel
Description : Fuels that may classified conveniently in solid, liquid and gaseous. a. Unleaded fuel b. Diesel fuel c. Fossil fuel d. All of the above
Last Answer : Fossil fuel
Description : In which of the following form(s), the waster products are discharged into the biosphere? A. Gaseous B. Liquid C. Solid D. All of the above
Last Answer : D. All of the above
Description : ________ fuels produce least amount of harmful gases and do not leave behind solid residue on combustion. a) solid b)gaseous c)liquid d )semi-solid
Last Answer : b)gaseous
Description : The substance which does not expand on going from liquid state to solid state is – (1) Water (2) Cast-iron (3) Aluminium (4) Type metal
Last Answer : (4) Type metal Explanation: In printing, type metal (sometimes called hot metal) refers to the metal alloys used in traditional type founding and hot metal typesetting. Lead is the main constituent of ... and solidifies in a simple manner at a specific temperature. This is not the case with alloys.
Description : What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state? A. Condensation B. Vaporization C. Sublimation D. Cryogenation
Last Answer : Sublimation
Description : What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state? A. Heat of fusion B. Heat of vaporation C. Heat of condensation D. Heat of fission
Last Answer : Heat of fusion
Description : The substance which does not expand on going from liquid state to solid state is (1) Water (2) Cast-iron (3) Aluminium(4) Type metal
Last Answer : Type metal
Description : What difference in bonding between the solid state and gaseous state of iodine?
Last Answer : Iodine molecule has covalent bonds.
Description : The medicines are most effective, if they are administered in the (a) colloidal state (b) solid state (c) solution state (d) gaseous state
Last Answer : Ans:(a)
Description : State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials.
Last Answer : Failure phenomena in insulating material means the dielectric property fails : The dielectric failure mean the dielectric strength of insulating material reduces due to high voltages or high ... 6. Due to poor maintenance of insulating material there may be possibility dielectric failure
Description : What is the temperature called at which a substance changes from a solid to a liquid?
Last Answer : It is the melting point of the substance.
Description : What substance changes from liquid to a solid?
Last Answer : One example is when water (liquid) is frozen and is turned into a solid (ice).
Description : What will determine if the substance is a solid liquid or gas at 100 degrees?
Last Answer : What is the answer ?
Description : (4) Water drops in a dispersion medium of air Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... or gas. Cloud is a colloidal dispersion of Water drops in a dispersion medium of air.
Last Answer : Conduction band electrons have more mobility than holes because they – (1) are lighter (2) experience collision less frequently (3) have negative charge (4) need less energy to move them
Description : (2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.
Last Answer : The presence of ozone in the stratosphere is responsible for – (1) increasing the average global temperature in recent years (2) higher rate of photosynthesis (3) checking the penetration of ultra-violet rays to the earth (4) supplying oxygen for people travelling in jets
Description : Any substance above its critical temperature exists as (A) Saturated vapour (B) Solid (C) Gas (D) Liquid
Last Answer : (C) Gas
Description : Solid and liquid phases of a substance are in equilibrium at the (A) Critical temperature (B) Melting point (C) Freezing point (D) Both (B) and (C)
Last Answer : D) Both (B) and (C)
Description : _________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage. a. Convection b. Conduction c. Radiation d. Sublimation
Description : The pressure of the vapor phase of a substance that is in equilibrium with the liquid or solid phase. a. Phase Pressure b. Equilibrium Vapor Pressure c. Specific Pressure d. Equilibrium Phase Pressure
Last Answer : Equilibrium Vapor Pressure
Description : Which one of the following best defines the word allotropes ? A Different structural forms of an element B A pair of substances that differ by H+ C Elements that possess properties intermediate between ... a specific number of neutrons E The different phases (solid, liquid or gas) of a substance
Last Answer : A Different structural forms of an element
Description : What term refers to the heat needed to change a unit mass of a substance at its melting temperature from a solid into a liquid?
Last Answer : ANSWER: HEAT OF FUSION or LATENT HEAT OF FUSION or ENTHALPY OF FUSION
Description : The critical temperature is the temperature: w) above which a substance cannot be vaporized x) at which the density is a minimum y) at which solid, liquid, and vapor are in equilibrium z) above which the substance cannot be liquified.
Last Answer : ANSWER: Z -- ABOVE WHICH THE SUBSTANCE CANNOT BE LIQUIFIED.
Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation
Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation
Description : In nature water may occur as (A) Liquid (B) Solid (C) Vapours (D) All the above
Last Answer : Answer: Option D
Description : The angle of contact in case of a liquid depends upon (A) The nature of the liquid and the solid (B) The material which exists above the free surface of the liquid (C) Both of die above (D) Any one of the above
Last Answer : Answer: Option C
Description : Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are ... __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800
Last Answer : (B) 900-1000
Description : A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg ( ... + kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg
Last Answer : (D) 1/ke ff = 1/k + 1/kg
Description : Explain the reasons for failure of gaseous and solid dielectric materials used in electrical engineering application.
Last Answer : Reasons for failure of gaseous and solid dielectric materials used in electrical engineering application. 1. If the system voltage increases more than breakdown voltage for some interval then ... chemical breakdown usually occurs at very high temperature and high humidity of the surrounding air
Description : Which one can be directly solidified from gaseous state without entering into liquid state? (A) Helium (B) Oxygen (C) Carbon dioxide (D) None of these
Last Answer : (C) Carbon dioxide
Description : What refers to the state at which liquid and gaseous phases are indistinguishable? a. Triple point b. Critical point c. Boiling point d. Pour point
Last Answer : Critical point
Description : _________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed. a) Vapor b) Saturated Vapor c) Superheated Vapor d) Wet Vapor
Last Answer : Vapor
Description : State gaseous and liquid insulating material.
Last Answer : i) Gaseous insulating material : 1. Air 2. Nitrogen 3. Hydrogen 4. SF6 ii) liquid insulating material: 1. Transformer oil 2. Capacitor oil 3. Cable oil 4. Pyranol 5. Savotal 6. Savol 7. Vegetable oil 8. Silicon liquids
Description : What is the hardest substance found in nature? -General Knowledge
Last Answer : While diamonds may be the hardest naturally occurring substance found on earth, he explains, they are not the hardest available (there are two harder substances - a laboratory synthetic nanomaterial called wurtzite boron nitride and a substance found in meteorites called lonsdaleite)