whya. A loosely knitted sweater will keep you warmer than a tightly knitted one.b. Small gaps are left between the joints of concrete slabs on bridges.?

whya. A loosely knitted sweater will keep you warmer than a tightly knitted one.b. Small gaps are left between the joints of concrete slabs on bridges.?
by

1 Answer

Answer :

to allow expansion in summer
by

Related questions

Is it possible to repair a knitted sweater?

Description : I have a hole in a knitted sweater from grandma. I don't know if I should admit it to her. Will it be fixed somehow? Someone who knits will definitely advise. So I don't show it to Grandma and she can't fix it. I'd rather not tell her and leave the sweater in the closet.

Last Answer : will definitely go. Grandma will fix it for you.

How To Make A Knitted Sweater

Description : How To Make A Knitted Sweater

Last Answer : Unprepared for the winter season, you are in some obscure corner of your home and shivering. Snow starts to cover the driveway of your home. A fireplace sounds nice but you don't have any ... is finished. You can finally embrace the cold weather along with your loved ones this winter season.

Free electrons are: (a) Fixed (b) Loosely bounded (c) Strongly fixed (d) Tightly bound

Description : Free electrons are: (a) Fixed (b) Loosely bounded (c) Strongly fixed (d) Tightly bound

Last Answer : (b) Loosely bounded

The distributed system is a collection of (P) and communication is achieved in distributed system by (Q) , where (P) and (Q) are : (A) Loosely coupled hardware on tightly coupled software and disk sharing, respectively. (B) Tightly coupled hardware on loosely coupled software and shared memory, respectively. (C) Tightly coupled software on loosely coupled hardware and message passing ,respectively. (D) Loosely coupled software on tightly coupled hardware and file sharing, respectively.

Description : The distributed system is a collection of (P) and communication is achieved in distributed system by (Q) , where (P) and (Q) are : (A) Loosely coupled hardware on tightly ... message passing ,respectively. (D) Loosely coupled software on tightly coupled hardware and file sharing, respectively.

Last Answer : (C) Tightly coupled software on loosely coupled hardware and message passing ,respectively. 

Distributed operating systems consist of: (1) Loosely coupled O.S. software on a loosely coupled hardware (2) Loosely coupled O.S. software on a tightly coupled hardware (3) Tightly coupled O.S. software on a loosely coupled hardware (4) Tightly coupled O.S. software on a tightly coupled hardware

Description : Distributed operating systems consist of: (1) Loosely coupled O.S. software on a loosely coupled hardware (2) Loosely coupled O.S. software on a tightly coupled hardware (3) Tightly coupled O.S. software on a loosely coupled hardware (4) Tightly coupled O.S. software on a tightly coupled hardware

Last Answer : Answer: 3

n Girder and Slab Bridges Danger level should be marked below bottom of girders/slabs for water way is > 12.20 < 30.5 m a) 300 mm b) 600 mm* c) 500 mm d) 450 mm

Description : n Girder and Slab Bridges Danger level should be marked below bottom of girders/slabs for water way is > 12.20 < 30.5 m a) 300 mm b) 600 mm* c) 500 mm d) 450 mm

Last Answer : b) 600 mm*

In Girder and Slab Bridges Danger level should be marked below bottom of girders/slabs for water way is > 6.10 < 12.2 m a) 300 mm b) 600 mm c) 450 mm* d) 500 mm

Description : In Girder and Slab Bridges Danger level should be marked below bottom of girders/slabs for water way is > 6.10 < 12.2 m a) 300 mm b) 600 mm c) 450 mm* d) 500 mm

Last Answer : c) 450 mm*

Pick up the correct statement from the following: (A) Construction joints in columns are provided a few cm below the junction of beam (B) Construction joints in columns are provided at the bottom hunching (C) Construction joints in beams and slabs are provided within middle third (D) All the above

Description : Pick up the correct statement from the following: (A) Construction joints in columns are provided a few cm below the junction of beam (B) Construction joints in columns are provided at the bottom ... (C) Construction joints in beams and slabs are provided within middle third (D) All the above

Last Answer : Answer: Option D

Vertical construction joints are provided where the shearing forces are minimum in the case of (A) Slabs (B) Beams (C) Girders (D) All of these

Description : Vertical construction joints are provided where the shearing forces are minimum in the case of (A) Slabs (B) Beams (C) Girders (D) All of these

Last Answer : Answer: Option D

A small gap is left at the joints of rails in a railway track to – (1) avoid the tracks being distorted due to seasonal temperature variation (2) avoid the heating of tracks to high temperature (3) control the speed of train (4) keep the rails equidistant

Description : A small gap is left at the joints of rails in a railway track to – (1) avoid the tracks being distorted due to seasonal temperature variation (2) avoid the heating of tracks to high temperature (3) control the speed of train (4) keep the rails equidistant

Last Answer : (1) avoid the tracks being distorted due to seasonal temperature variation Explanation: A small gap is left at the joints of rails in a railway track to provide space for the expansion of rail pieces when the temperature rises during summer.

A small gap is left at the joints of rails in a railway track to (1) avoid the tracks being distorted due to seasonal temperature variation (2) avoid the heating of tracks to high temperature (3) control the speed of train (4) keep the rails equidistant

Description : A small gap is left at the joints of rails in a railway track to (1) avoid the tracks being distorted due to seasonal temperature variation (2) avoid the heating of tracks to high temperature (3) control the speed of train (4) keep the rails equidistant

Last Answer : avoid the tracks being distorted due to seasonal temperature variation

Why An asphalt sidewalk is warmer to the touch than a concrete sidewalk?

Description : Why An asphalt sidewalk is warmer to the touch than a concrete sidewalk?

Last Answer : asphalt is usually is black, and the color black takes in and stores more heat rather than a concrete sidewalk because it has a lighter color.

If high yield strength deformed bars are used, the are of distribution reinforcement in slabs, should not less than. (a) 0.12% of the gross area of concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete

Description : If high yield strength deformed bars are used, the are of distribution reinforcement in slabs, should not less than. (a) 0.12% of the gross area of concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete

Last Answer : (a) 0.12% of the gross area of concrete

If plain bars are used, the area of distribution reinforcement in slabs should not less than (a) 0.12% of the gross area f concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete

Description : If plain bars are used, the area of distribution reinforcement in slabs should not less than (a) 0.12% of the gross area f concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete

Last Answer : (b) 0.15% of the gross area of concrete

Can I do anything on a budget to improve concrete slabs?

Description : Can I do anything on a budget to improve concrete slabs?

Last Answer : My builder painted my concrete patio and it looks great. It's not my first choice in terms of beautification, tile or pavers would look more elegant, but the paint is very inexpensive relatively ... Home Depot or Lowe's and spend time talking to the paint people and garden people about options.

The concrete work for the following part of the building of specified thickness is measured in square metres (A) Root slabs (B) Floors (C) Wall panels (D) All the above

Description : The concrete work for the following part of the building of specified thickness is measured in square metres (A) Root slabs (B) Floors (C) Wall panels (D) All the above

Last Answer : (D) All the above

Consider the following activities in a building construction: 1. Concreting of roof slabs 2. Brick-jelly lime concrete terracing 3. Erection of form work for slab 4. Construction of parapet wall in terrace The correct sequence of these activities is (A) 1, 3, 2, 4 (B) 3, 1, 4, 2 (C) 3, 1, 2, 4 (D) 1, 3, 4, 2

Description : Consider the following activities in a building construction: 1. Concreting of roof slabs 2. Brick-jelly lime concrete terracing 3. Erection of form work for slab 4. Construction of parapet wall in terrace The correct sequence of these ... (B) 3, 1, 4, 2 (C) 3, 1, 2, 4 (D) 1, 3, 4, 2

Last Answer : (C) 3, 1, 2, 4

For the construction of R.C.C. slabs, columns, beams, walls, etc. the grade of concrete mix used, is (A) 1 : 3 : 6 (B) 1 : 1½ : 3 (C) 1 : 2 : 4 (D) 1 : 1 : 2

Description : For the construction of R.C.C. slabs, columns, beams, walls, etc. the grade of concrete mix used, is (A) 1 : 3 : 6 (B) 1 : 1½ : 3 (C) 1 : 2 : 4 (D) 1 : 1 : 2

Last Answer : (C) 1 : 2 : 4

The concrete slump recommended for beams and slabs; is (A) 25 to 50 mm (B) 25 to 75 mm (C) 30 to 125 mm (D) 50 to 100 mm

Description : The concrete slump recommended for beams and slabs; is (A) 25 to 50 mm (B) 25 to 75 mm (C) 30 to 125 mm (D) 50 to 100 mm

Last Answer : Answer: Option C

Why gaps are left between two sections of a railway track?

Description : Why gaps are left between two sections of a railway track?

Last Answer : The gaps allow the expansion and contraction of rails during summer and winter season.

A tight-rope walker carries a long pole which he holds across his body. The purpose of this pole is to------? A. Prop him up if he falls B. Spread out his weight and reduce the pressure on the rope C. Add extra weight to keep the rope tightly stretched D. To keep the centre of gravity always vertically above the rope (Answer)

Description : A tight-rope walker carries a long pole which he holds across his body. The purpose of this pole is to------? A. Prop him up if he falls B. Spread out his weight and reduce the ... to keep the rope tightly stretched D. To keep the centre of gravity always vertically above the rope (Answer)

Last Answer : D. To keep the centre of gravity always vertically above the rope (Answer)

A tight-rope walker carries a long pole which he holds across his body. The purpose of this pole is to-----? A. Prop him up if he falls B. Spread out his weight and reduce the pressure on the rope C. Add extra weight to keep the rope tightly stretched D. To keep the Center of gravity always above vertically above the rope (Answer)

Description : A tight-rope walker carries a long pole which he holds across his body. The purpose of this pole is to-----? A. Prop him up if he falls B. Spread out his weight and reduce the ... keep the rope tightly stretched D. To keep the Center of gravity always above vertically above the rope (Answer)

Last Answer : D. To keep the Center of gravity always above vertically above the rope (Answer)

what is the best fabric for a sweater to keep you warm?

Description : what is the best fabric for a sweater to keep you warm?

Last Answer : Wool is one of the best sweater fabrics for keeping you warm, rivaled by cashmere and fleece. As a rule, knitted sweaters that occupy space tend to be good fabrics as they trap air to be heated within their material and provide an insulating layer against the outside.

Why two thin shirts can keep us warmer than a single thick shirt in winter ? (1) Two thin shirts become thicker so prevent transmission of heat (2) Air layer between two shirts works as good conductor (3) Air layer between two shirts behaves like insulating media (4) No radiation of heat takes place

Description : Why two thin shirts can keep us warmer than a single thick shirt in winter ? (1) Two thin shirts become thicker so prevent transmission of heat (2) Air layer between two shirts works as good conductor (3) Air layer between two shirts behaves like insulating media (4) No radiation of heat takes place

Last Answer : Air layer between two shirts behaves like insulating media

How to shrink machine knitted clothing material?

Description : How to shrink machine knitted clothing material?

Last Answer : Wool? Or cotton? Wash in hot water, dry on high heat.

Who knows how to mend holes in knitted clothing?

Description : Who knows how to mend holes in knitted clothing?

Last Answer : A seamstress….?

Knitted curtains?

Description : Knitted curtains?

Last Answer : How about this pattern?

Why is a knitted blanket called an afghan.

Description : Why is a knitted blanket called an afghan.

Last Answer : That’s something I’ve wondered about myself. For that matter, why is that stool-like chair accessory called an ottoman?

Warm knitted gloves?

Description : Is it worth knitting gloves for the winter? Or is it better to buy leather, for example?

Last Answer : Of course they are warm. Knitted best wool.

How the fish braid is knitted

Description : Is it very complicated?

Last Answer : here is an illustrative video: http://budkocka.cz/krasa/rybi-cop/ (finger)

What is A knitted helmet called?

Description : What is A knitted helmet called?

Last Answer : Need answer

How do engineer determine the number of cells for concrete box girder bridges?

Description : How do engineer determine the number of cells for concrete box girder bridges?

Last Answer : If the depth of a box girder bridge exceeds 1/6 or 1/5 of the bridge width, then it is recommended to be designed as a single cell box girder bridge. However, if the bridge depth is ... improvement in transverse load distribution when the number of cells of box girder is increased to three or more.

Are diaphragms necessary in the design of concrete box girder bridges?

Description : Are diaphragms necessary in the design of concrete box girder bridges?

Last Answer : Diaphragms are adopted in concrete box girder bridges to transfer loads from bridge decks to bearings. Since the depth of diaphragms normally exceeds the width by two times, they are usually designed ... In fact, diaphragms also contribute to the provision of torsional restraint to the bridge deck.

Sometimes the side of concrete bridges is observed to turn black in colour. What is the reason for this phenomenon?

Description : Sometimes the side of concrete bridges is observed to turn black in colour. What is the reason for this phenomenon?

Last Answer : In some cases, it may be due to the accumulation of dust and dirt. However, for the majority of such phenomenon, it is due to fungus or algae growth on concrete bridges. After rainfall, the ... help to solve this problem. Reference is made to Sandberg Consulting Engineers Report 18380/X/01.

In Case If Concrete Box Girder Bridges How Is The Number Of Cells Determined?

Description : In Case If Concrete Box Girder Bridges How Is The Number Of Cells Determined?

Last Answer : Answer : When the depth of a box girder bridge exceed 1/6th or 1/5th of the bridge width then the design recommended is that of a single cell box girder bridge. But in case the depth of ... the transverse load distribution when the number of cells of the box girder is higher than three or more.

How long can grocery store keep chicken under the warmer to be sold?

Description : How long can grocery store keep chicken under the warmer to be sold?

Last Answer : answer:As long as the food is kept cool enough or warm enough to satisfy the local Board of Health, there is no violation of law or regulation, as far as I know. However, most stores have quality and ... you, but I don't think that a law has been violated just because it's dried out and tasteless.

What do I wear to keep me warmer while swimming?

Description : What do I wear to keep me warmer while swimming?

Last Answer : Check out neoprene swimwear. The neoprene was designed by waterfowl hunters to keep them warm in cool water. You can get less protection by going to one of the lighter 3mm suits or warmer by going with 5mm.

In joints of precast concrete bridge segments, what are the functions of applying epoxy adhesive?

Description : In joints of precast concrete bridge segments, what are the functions of applying epoxy adhesive?

Last Answer : Epoxy adhesive is applied in these joints for the following purposes according to International Road Federation (1977): (i) It seals up the joints completely between precast concrete segments to protect the ... in transferring of shear between the joints in case a large single shear key is used.

Lead is poured into the joints between two __________ pipes. (A) Cast iron (B) Steel (C) Concrete (D) Plastic

Description : Lead is poured into the joints between two __________ pipes. (A) Cast iron (B) Steel (C) Concrete (D) Plastic

Last Answer : (A) Cast iron

Tie bars in cement concrete pavements are at (A) Expansion joints (B) Contraction joints (C) Warping joints (D) Longitudinal joints

Description : Tie bars in cement concrete pavements are at (A) Expansion joints (B) Contraction joints (C) Warping joints (D) Longitudinal joints

Last Answer : Answer: Option D

Joints in concrete structures, are provided (A) To reduce the tensile stresses likely to be developed due to evaporation of water (B) To minimise the change in the dimensions of the slab (C) To minimise the necessary cracking (D) All the above

Description : Joints in concrete structures, are provided (A) To reduce the tensile stresses likely to be developed due to evaporation of water (B) To minimise the change in the dimensions of the slab (C) To minimise the necessary cracking (D) All the above

Last Answer : (D) All the above

Horizontal construction joints in concrete walls are generally provided at (A) Soffit level (B) Window sill level (C) Floor level (D) All the above

Description : Horizontal construction joints in concrete walls are generally provided at (A) Soffit level (B) Window sill level (C) Floor level (D) All the above

Last Answer : Answer: Option D

Expansion joints are provided if the length of concrete structures exceeds (A) 10 m (B) 15 m (C) 15 m (D) 45m

Description : Expansion joints are provided if the length of concrete structures exceeds (A) 10 m (B) 15 m (C) 15 m (D) 45 m

Last Answer : Answer: Option D

Construction joints are generally provided in concrete (A) Roads (B) Retaining walls (C) Lining of canals (D) All the above

Description : Construction joints are generally provided in concrete (A) Roads (B) Retaining walls (C) Lining of canals (D) All the above

Last Answer : Answer: Option D

Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Description : Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Last Answer : d) all the above*

Suggest the type of joints in concrete when it is likely to increase in volume due to temperature change. Explain it and draw its neat sketch.

Description : Suggest the type of joints in concrete when it is likely to increase in volume due to temperature change. Explain it and draw its neat sketch.

Last Answer : When it is likely to increase in volume due to temperature change expansion joint is constructed. i. Expansion joints are provided by keeping a gap between panels of concrete and later sealing it ii. ... cotton and finally such joint is sealed using sealants like wood, thermocol or bitumen. 

List four materials used for filling joints in concrete.

Description : List four materials used for filling joints in concrete.

Last Answer : Materials used for filling joints; 1. Asphalt, tar, bituminous materials 2. Fibre and fibre products 3. Sponge rubber 4. Cork 5. Polymer 6. Thermoplastic 7. Glass

Explain the procedure for joining old and new concrete work, also state any two material used for filling joints.

Description : Explain the procedure for joining old and new concrete work, also state any two material used for filling joints.

Last Answer : Procedure of joining old and new concrete: When new concreting is done in continuation with old concrete after a gap of some days, months or even years, then the new and old concrete must have a strong bond with ... rubber 4. Cork 5. Polymer 6. Thermoplastic and thermo-col 7. Glass

The date of painting of steel work should be painted in white on the out side of the left girder a) of the 1st span only b) first span only but on all spans for Imp. Bridges* c) of the all spans d) None of the above

Description : The date of painting of steel work should be painted in white on the out side of the left girder a) of the 1st span only b) first span only but on all spans for Imp. Bridges* c) of the all spans d) None of the above

Last Answer : b) first span only but on all spans for Imp. Bridges*

Do scientists using the word "theory" loosely extend confusion on its exact, scientific meaning within the non-scientific public?

Description : Do scientists using the word "theory" loosely extend confusion on its exact, scientific meaning within the non-scientific public?

Last Answer : If I'm understanding your question correctly, yes, I think bandying about the colloquial use of theory clouds the scientific meaning of the word. And I find that in debates about evolution ... are misusing the word theory gets tedious. The scientists should probably use hypothesis instead.