Why is copper mainly used in electrical cables and electronic industries? -SST 10th

Why is copper mainly used in electrical cables and electronic industries? -SST 10th
by

1 Answer

Answer :

It is used in electrical cables as it is malleable, ductile and a good conductor of heat and electricity.
by

Related questions

Why is copper mainly used in electrical cables, electronics and chemical industries? -SST 10th

Description : Why is copper mainly used in electrical cables, electronics and chemical industries? -SST 10th

Last Answer : Copper is malleable, ductile and a good conductor of electricity. Therefore, it is mainly used in electrical cables, electronics and chemical industries.

The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Description : The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Last Answer : (c) smaller dielectric loss

Name the regions where electronic industries are located. -SST 10th

Description : Name the regions where electronic industries are located. -SST 10th

Last Answer : Bengaluru has emerged as the electronic capital’ of India. Other important centres for electronic goods are Mumbai, Delhi, Hyderabad, Pune, Chennai, Kolkata, Lucknow, Coimbatore.

Why is mica considered the most important mineral in electric and electronic industries? -SST 10th

Description : Why is mica considered the most important mineral in electric and electronic industries? -SST 10th

Last Answer : Mica is: (i) Excellent dielectric in strength and has low powerless factor. (ii) It has insulating properties and resistance to high voltage. (iii) Most indispensable mineral used in electric and electronic industries.

Name the Electronic Industries of India. -SST 10th

Description : Name the Electronic Industries of India. -SST 10th

Last Answer : (i) Bharat Electronic Ltd. (BEL). (ii) The Indian Telephone Industries (ITI). (iii) The Electronic Corporation of India Ltd. (ECIL).

When Ontario Hydro workers set up electrical cables during the summer they allow the cables to sag. Suggest a reason for this. In your answer refer to the particle theory?

Description : When Ontario Hydro workers set up electrical cables during the summer they allow the cables to sag. Suggest a reason for this. In your answer refer to the particle theory?

Last Answer : i know someones going to be on this sooooooooo....... they sag because the hydro workers know, from the heat the cbles will sag during the summer, so they start the sag so they cant sag anymore

Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should never be grounded. C. Electrical cables must be rigidly held in place by welding of armored cable, or glued in place where nonmetallic insulation is used. D. All of the above.

Description : Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should ... , or glued in place where nonmetallic insulation is used. D. All of the above.

Last Answer : Answer: A

When electrical cables penetrate watertight bulkheads, _______________. A. they should be grounded on either side of the bulkhead B. they must be bent to a radius of six diameters C. a watertight stuffing tube capable of accepting packing should be employed D. they should be secured by a clamp

Description : When electrical cables penetrate watertight bulkheads, _______________. A. they should be grounded on either side of the bulkhead B. they must be bent to a radius of six diameters C. a watertight stuffing tube capable of accepting packing should be employed D. they should be secured by a clamp

Last Answer : Answer: C

The physical layer provides __________a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Description : The physical layer provides __________ a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Last Answer : d. all of the mentioned

The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal levelC. specification for IR over optical fiber D. all of the mentioned

Description : The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Description : The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Last Answer : d) all of the mentioned

One of the practical application of platinum is a) electrical cables c)decorating food stuff b) cooking vessel d)dentistry

Description : One of the practical application of platinum is a) electrical cables c)decorating food stuff b) cooking vessel d)dentistry

Last Answer : d)dentistry

The material commonly used for sheaths of underground cables is (a) lead (b) rubber (c) copper (d) iron

Description : The material commonly used for sheaths of underground cables is (a) lead (b) rubber (c) copper (d) iron

Last Answer : (a) lead

The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Description : The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Last Answer : (b) steel

Copper as conductor for cables is used as (a) annealed (b) hardened and tempered (c) hard drawn (d) alloy with chromium

Description : Copper as conductor for cables is used as (a) annealed (b) hardened and tempered (c) hard drawn (d) alloy with chromium

Last Answer : (a) annealed

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Last Answer : B. absorption loss

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Last Answer : absorption loss

The material commonly used for sheaths of underground cables is (a) lead (b) rubber (c) copper (d) iron

Description : The material commonly used for sheaths of underground cables is (a) lead (b) rubber (c) copper (d) iron

Last Answer : (a) lead

The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Description : The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Last Answer : (b) steel

Why is aluminium used instead of copper for overhead cables?

Description : Why is aluminium used instead of copper for overhead cables?

Last Answer : Because copper reacts with atmosphere variation and it's cost High as compared to aluminium and aluminium is good property and less cost so aluminium is used

Economic problem arises mainly due to (1) overpopulation (2) unemployment (3) scarcity of resources (4) lack of industries

Description : Economic problem arises mainly due to (1) overpopulation (2) unemployment (3) scarcity of resources (4) lack of industries

Last Answer : (3) scarcity of resources Explanation: The theory of Economic problem states that there is scarcity, or that the finite resources available are insufficient to satisfy all human wants and needs. The ... produced and how the factors of production (such as capital and labor) are to be allocated.

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Waste/polluted water discharged from electroplating, blast furnace and coal mining industries contain mainly __________ substances. (A) Radioactive (B) Organic (C) Inorganic (D) None of these

Description : Waste/polluted water discharged from electroplating, blast furnace and coal mining industries contain mainly __________ substances. (A) Radioactive (B) Organic (C) Inorganic (D) None of these

Last Answer : (C) Inorganic

Economic problem arises mainly due to (1) overpopulation (2) unemployment (3) scarcity of resources (4) lack of industries

Description : Economic problem arises mainly due to (1) overpopulation (2) unemployment (3) scarcity of resources (4) lack of industries

Last Answer : scarcity of resources

Name two products each of the following industries: 1. petrochemical industry 2. heavy engineering industry. 3. electronic industry. -Geography

Description : Name two products each of the following industries: 1. petrochemical industry 2. heavy engineering industry. 3. electronic industry. -Geography

Last Answer : 1. Synthetic fibers, plastics 2. Wrist watch, drilling machines 3. Computers, Television

Which minerals are indispensable for electric and electronic industries? -Geography

Description : Which minerals are indispensable for electric and electronic industries? -Geography

Last Answer : Mica is one of the minerals which is indispensable for electric and electronic industries. It is a mineral formed by the series of plates or leaves and can be clear, black, green, red, ... is another leading Mica producing area. Another important producer is the Nellore Mica belt of Andhra Pradesh.

What does contractor compliance with the Electronic Industries Alliance Standard 748 (EIA-748) Earned Value Management System (EVMS) guidelines require?

Description : What does contractor compliance with the Electronic Industries Alliance Standard 748 (EIA-748) Earned Value Management System (EVMS) guidelines require?

Last Answer : Need answer

Laser welding is widely employed in the __________ industries. (A) Electronic (B) Structural (C) Process (D) Heavy

Description : Laser welding is widely employed in the __________ industries. (A) Electronic (B) Structural (C) Process (D) Heavy

Last Answer : Option A

Laser welding is widely employed in the __________ industries. (A) Electronic (B) Structural (C) Process (D) Heavy

Description : Laser welding is widely employed in the __________ industries. (A) Electronic (B) Structural (C) Process (D) Heavy

Last Answer : Option A

Which of the following statements is false? Electronic commerce: A. can allow new ventures to compete on more or less equal terms with large firms. B. can lead to small businesses having reduced contact with its customers. C. is rarely used in small businesses. D. is used in many different industries and markets.

Description : Which of the following statements is false? Electronic commerce: A. can allow new ventures to compete on more or less equal terms with large firms. B. can lead to small businesses having reduced contact ... C. is rarely used in small businesses. D. is used in many different industries and markets.

Last Answer : C. is rarely used in small businesses.

In which of the following industries is mica used as a raw material? (a) Electrical (b) Iron and steel (c) Toys (d) Glass and pottery

Description : In which of the following industries is mica used as a raw material? (a) Electrical (b) Iron and steel (c) Toys (d) Glass and pottery

Last Answer : Ans:(a)

What is mainly obtained from bauxite? (a) Copper (b) Aluminium (c) Iron (d) Gold

Description : What is mainly obtained from bauxite? (a) Copper (b) Aluminium (c) Iron (d) Gold

Last Answer : Ans:(b)

Babbitt metal (used for making bearings) comprises of (A) Mainly tin (85%) and lead (B) Saw dust and iron dust mixture (C) Zinc and aluminium (D) Copper and aluminium

Description : Babbitt metal (used for making bearings) comprises of (A) Mainly tin (85%) and lead (B) Saw dust and iron dust mixture (C) Zinc and aluminium (D) Copper and aluminium

Last Answer : (A) Mainly tin (85%) and lead

70] Silicon steel used in laminations mainly reduces A. Hysteresis loss B. Eddy current losses C. Copper loss D. All of the above

Description : 70] Silicon steel used in laminations mainly reduces A. Hysteresis loss B. Eddy current losses C. Copper loss D. All of the above

Last Answer : A. Hysteresis loss

The efficiency of a transformer is mainly dependent on (A) core losses. (B) copper losses. (C) stray losses. (D) dielectric losses.

Description : The efficiency of a transformer is mainly dependent on (A) core losses. (B) copper losses. (C) stray losses. (D) dielectric losses.

Last Answer : Ans: A Core loss has prominent value over other losses

Does anybody know an easy way to draw your own electrical/electronic diagrams in ladder or schematic drawings on your computer?

Description : Does anybody know an easy way to draw your own electrical/electronic diagrams in ladder or schematic drawings on your computer?

Last Answer : here is some software that claims to allow you to draw your own circuits, it also claims to be free. however as i have never used it my self i cant say for sure.

Why is mica used in the electrical and electronic industry? -Geography

Description : Why is mica used in the electrical and electronic industry? -Geography

Last Answer : Mica has insulating properties which can withstand high voltage and has low power loss factor. This has made mica useful in the electrical and electronic industry.

IEEE stands for ___________ a) Instantaneous Electrical Engineering b) Institute of Emerging Electrical Engineers c) Institute of Emerging Electronic Engineers d) Institute of Electrical and electronics engineers

Description : IEEE stands for ___________ a) Instantaneous Electrical Engineering b) Institute of Emerging Electrical Engineers c) Institute of Emerging Electronic Engineers d) Institute of Electrical and electronics engineers

Last Answer : Answer: d Explanation: The IEEE is an organization of professionals in the field of electronics and electrical engineering. IEEE has given certain standards of its own which are followed in the field of computer science and electrical engineering

Before any work on electrical or electronic equipment is performed, which of the following precautions should be carried out? A. De-energize the applicable switchboard bus. B. Bypass the interlocks. C. Secure and tag the supply circuit breaker in the open position. D. Station a man at the circuit supply switch.

Description : Before any work on electrical or electronic equipment is performed, which of the following precautions should be carried out? A. De-energize the applicable switchboard bus. B. Bypass the interlocks. C. ... supply circuit breaker in the open position. D. Station a man at the circuit supply switch.

Last Answer : Answer: C

Which type of flux should be used when soldering electrical wire connections and electronic components? A. Silver flux B. Rosin flux C. Solid flux D. Acid flux

Description : Which type of flux should be used when soldering electrical wire connections and electronic components? A. Silver flux B. Rosin flux C. Solid flux D. Acid flux

Last Answer : Answer: B

Which system is used in digital computers because all electrical and electronic circuits can be made to respond to the states concept: a. Hexadecimal number b. Binary number c. Octal number d. Decimal number

Description : Which system is used in digital computers because all electrical and electronic circuits can be made to respond to the states concept: a. Hexadecimal number b. Binary number c. Octal number d. Decimal number

Last Answer : b. Binary number

Information is handled in the computer by _ __ a. Electrical digit b. Electrical component c. Electronic bit d. None of these

Description : Information is handled in the computer by _ __ a. Electrical digit b. Electrical component c. Electronic bit d. None of these

Last Answer : b. Electrical component

HEV stands for ------- a. Hybrid Electronic Vehicle b. Hybrid Electrical vehicle c. Hybrid Environmental Vehicle d. None of the above

Description : HEV stands for ------- a. Hybrid Electronic Vehicle b. Hybrid Electrical vehicle c. Hybrid Environmental Vehicle d. None of the above

Last Answer : Ans:- b. Hybrid Electrical vehicle

To protect most of the electrical equipment handling low power, the types of relays used are (a) thermocouple (b) electronic and bimetallic (c) both (a) and (b) (d) none of the above

Description : To protect most of the electrical equipment handling low power, the types of relays used are (a) thermocouple (b) electronic and bimetallic (c) both (a) and (b) (d) none of the above

Last Answer : (c) both (a) and (b)

What type of flux must be used in all electrical and electronic soldering?

Description : What type of flux must be used in all electrical and electronic soldering?

Last Answer : Noncorrosive, nonconductive rosin fluxes.

State advantages of electronic ballast compare to electrical ballast.

Description : State advantages of electronic ballast compare to electrical ballast.

Last Answer : advantages of electronic ballast compare to electrical ballast: 1. Instant light 2. Lighter in weight 3. power saving is up to 35% 4. Heat output is negligible, that reduces load on air conditioning. 5. Improved power factor 6. Operates at low voltage 7. Enhances life of lamp

Pick out the wrong statement. (A) Copper is the metal having the highest electronic conductivity (B) Hardenability & Weldability of metals are inversely related (C) Covalent bonding formed by sharing of electrons is present in all semiconductor materials (D) Glass transition temperature applies to 'polymers' but not to 'glasses'

Description : Pick out the wrong statement. (A) Copper is the metal having the highest electronic conductivity (B) Hardenability & Weldability of metals are inversely related (C) Covalent bonding formed by ... all semiconductor materials (D) Glass transition temperature applies to 'polymers' but not to 'glasses'

Last Answer : Option A

The massses of the three wires of copper are in the ratio 1 : 3 : 5. And their lengths are in th ratio 5 : 3 : 1. the ratio of their electrical resist

Description : The massses of the three wires of copper are in the ratio 1 : 3 : 5. And their lengths are in th ratio 5 : 3 : 1. the ratio of their electrical resist

Last Answer : The massses of the three wires of copper are in the ratio 1 : 3 : 5. And their lengths are in th ratio 5 : 3 : ... 5:3:1` C. `1:15:125` D. `125:15:1`

The masses of the three wires of copper are in the ratio `5:3:1` and their lengths are in the ratio `1:3:5`. The ratio of their electrical resistances

Description : The masses of the three wires of copper are in the ratio `5:3:1` and their lengths are in the ratio `1:3:5`. The ratio of their electrical resistances

Last Answer : The masses of the three wires of copper are in the ratio `5:3:1` and their lengths are in the ratio `1:3:5`. The ... ):15:1` C. `1:15:125` D. `1:3:5`