Which of this represent the half-time constant?

Which of this represent the half-time constant? 

a) 0.693 T b) 0.504 T c) 0.876 T d) 0.450 T
by

1 Answer

Answer :

Which of this represent the half-time constant? 


0.693 T 

by

Related questions

Which of these represent short in a series circuit?

Description :  Which of these represent short in a series circuit?  a) Increase in resistance b) Increase in current c) Increase in voltage d) Increase in conductance

Last Answer :  Which of these represent short in a series circuit?  Increase in current

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is

Description : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

Last Answer : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is 500 W

If a function has a constant double time what type of function does this represent?

Description : If a function has a constant double time what type of function does this represent?

Last Answer : Feel Free to Answer

At constant temperature, a. Graph shows relation between pressure and volume. Represent the relation mathematically. b. Identify the law. 

Description : At constant temperature, a. Graph shows relation between pressure and volume. Represent the relation mathematically. b. Identify the law. 

Last Answer : With the help of graph answer the following - At constant temperature, a. Graph shows relation between ... law. c. Write the statement of law.

A proton moving with a constant velocity passes through a region of space without any changing its velocity. If `E` and `B` represent the electric and

Description : A proton moving with a constant velocity passes through a region of space without any changing its velocity. If `E` and `B` represent the electric and

Last Answer : A proton moving with a constant velocity passes through a region of space without any changing its velocity. If `E` and ... = 0` D. `E ne 0, B ne 0`

In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASKB)PSKC)FSKD)QAM

Description : In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASK B) PSK C) FSK D) QAM

Last Answer : PSK

Which of the following diagramInternal energy is equal to the heat absorbed in case of a/an __________ process. (A) Constant volume (B) Polytropic (C) Adiabatic (D) Constant pressure s does not represent an Otto cycle?

Description : Which of the following diagrams does not represent an Otto cyInternal energy is equal to the heat absorbed in case of a/an __________ process. (A) Constant volume (B) Polytropic (C) Adiabatic (D) Constant pressure cle?

Last Answer : (A) Constant volume

Represent constant volume process on PV & TS diagram for steam.

Description : Represent constant volume process on PV & TS diagram for steam.

Last Answer : Represent constant volume process on PV & TS diagram for steam.

Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

Description : Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

Last Answer : Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

In the time response analysis of control system, Damping Ratio is given by -

Description : In the time response analysis of control system, Damping Ratio is given by - a) Actual damping / Critical damping b) Critical damping /Actual damping c) ( Sum of the Actual damping and critical damping) /Actual damping d)( Difference of the Actual damping and critical damping) / critical damping

Last Answer : In the time response analysis of control system, Damping Ratio is given by -  Actual damping / Critical damping

Which one of the following frequency meter is suitable for measuring radio frequency?

Description : Which one of the following frequency meter is suitable for measuring radio frequency?   (a) Vibrating reed frequency meter (b) Weston frequency meter (c) Electrical resonance frequency meter (d) Heterodyne frequency meter 

Last Answer : Which one of the following frequency meter is suitable for measuring radio frequency?   (a) Vibrating reed frequency meter (b) Weston frequency meter (c) Electrical resonance frequency meter (d) Heterodyne frequency meter 

Which of the following factors limit the deflection of the pointer of a PMMC instrument of about

Description : Which of the following factors limit the deflection of the pointer of a PMMC instrument of about 90o?  1. Its damping mechanism  2. Linearity of magnetic field in which the coil moves  3. Control spring arrangement  4. ... Only 1 and 3 (b) Only 2 and 4 (c) Only 2 and 3 (d) Only 1 and 4 

Last Answer : Which of the following factors limit the deflection of the pointer of a PMMC instrument of about 90o?  1. Its damping mechanism  2. Linearity of magnetic field in which the coil moves  3. Control spring arrangement  4. ... Only 1 and 3 (b) Only 2 and 4 (c) Only 2 and 3 (d) Only 1 and 4 

Torque/weight ratio of an instrument indicates

Description : Torque/weight ratio of an instrument indicates   (a) Selectivity (b) Accuracy (c) Fidelity (d) Sensitivity

Last Answer : Torque/weight ratio of an instrument indicates Sensitivity

Wagner's earth devices are used in AC bridge circuits for

Description : Wagner's earth devices are used in AC bridge circuits for (a) Eliminating the effect of earth capacitances (b) Eliminating the effect of intercomponent capacitances (c) Eliminating the effect of stray electrostatic fields (d) Shielding the bridge elements

Last Answer : Wagner's earth devices are used in AC bridge circuits for Eliminating the effect of earth capacitances

Loading effect is principally caused by instruments

Description : Loading effect is principally caused by instruments   (a) High resistance (b) Low sensitivity (c) High sensitivity (d) High range

Last Answer : B

Thermocouple instruments can be used for a frequency range upto

Description : Thermocouple instruments can be used for a frequency range upto   (a) 100Hz (b) 5000 Hz (c) 1 MHz (d) 50 MHz and above 

Last Answer : Thermocouple instruments can be used for a frequency range upto 50 MHz and above 

In a single phase induction energy meter, in order to obtain true value of energy, the shunt

Description : In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by   (a) 90o (b) 0o (c) 45o (d) 60o

Last Answer : In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by 90o

Gearing, blacklash, friction between moving parts and scale accuracies are generally known as

Description : Gearing, blacklash, friction between moving parts and scale accuracies are generally known as  (a) Instrument errors (b) Interference errors (c) Calibration errors (d) Interaction errors

Last Answer : Gearing, blacklash, friction between moving parts and scale accuracies are generally known as Instrument errors

If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of

Description : If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is   (a) 33.2 V/cm (b) 0.03 cm/V (c) 66.4 V/cm (d) 0.015 cm/V

Last Answer : If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is 0.03 cm/V

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is

Description : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Last Answer : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is 11%

If stator field is rotating in clockwise direction rotor rotates in

Description : If stator field is rotating in clockwise direction rotor rotates in (A) any direction (B) cannot predict (C) anticlockwise (D) clockwise 

Last Answer : If stator field is rotating in clockwise direction rotor rotates in clockwise 

What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp?

Description : What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp? (A) 5000 amp (B) 1000 amp (C) 400 amp (D) 800 amp 

Last Answer : What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp? (A) 5000 amp (B) 1000 amp (C) 400 amp (D) 800 amp 

What is the vector location of TRAP interrupt?

Description : What is the vector location of TRAP interrupt? (A) 0000 h (B) 0008 h (C) 0014 h (D) 0024 h

Last Answer : What is the vector location of TRAP interrupt?  0024 h

An amplifier has a voltage gain of 50; this gain in dB will be

Description : An amplifier has a voltage gain of 50; this gain in dB will be (A) 34 dB (B) 68 dB (C) 41 dB (D) 14 dB 

Last Answer : An amplifier has a voltage gain of 50; this gain in dB will be 34 dB

Converter is a device for transforming

Description : Converter is a device for transforming (A) ac to dc (B) dc to dc (C) dc to ac (D) ac to ac

Last Answer : Converter is a device for transforming ac to ac

The input frequency is 50 Hz. The ripple frequency in a 12 phase full wave rectifier is

Description : The input frequency is 50 Hz. The ripple frequency in a 12 phase full wave rectifier is (A) 1200 Hz (B) 600 Hz (C) 100 Hz (D) 50 Hz 

Last Answer : The input frequency is 50 Hz. The ripple frequency in a 12 phase full wave rectifier is 1200 Hz

The grid in triodes is made in the form of

Description : The grid in triodes is made in the form of (A) mesh (B) metal strip (C) metallic cylinder (D) single filament wire 

Last Answer : The grid in triodes is made in the form of mesh

The 555 timer can be used in which of the following configurations ?

Description : The 555 timer can be used in which of the following configurations ?  a) astable, monostable b) monostable, bistable c) astable, toggled d) bistable, tristable

Last Answer : The 555 timer can be used in astable, monostable configurations.

The dc current through each diode in a bridge rectifier equals : -

Description : The dc current through each diode in a bridge rectifier equals : - a) the load current b) half the dc load current c) twice the dc load current d) one-fourth the dc load current

Last Answer : The dc current through each diode in a bridge rectifier equals : - the load current

Intrinsic semiconductor material is characterized by a valence shell of how many electrons?

Description : Intrinsic semiconductor material is characterized by a valence shell of how many electrons? a) 1 b) 2 c) 4 d) 6

Last Answer : Intrinsic semiconductor material is characterized by a valence shell of 4 electrons.

Sample -and -hold circuits in ADCs are designed to : -

Description : Sample -and -hold circuits in ADCs are designed to : - a) sample and hold the output of the binary counter during the conversion process b) stabilize theAD Cs threshold c) voltage ... d) signal during the conversion process sample and hold the ADC staircase waveform during the conversion process

Last Answer : Sample -and -hold circuits in ADCs are designed to : - voltage during the conversion process stabilize the input analog 

Base 10 refers to which number system?

Description : Base 10 refers to which number system? a) binary coded decimal b) decimal c) octal d) hexadecimal

Last Answer : Base 10 refers to decimal number system.

A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : -

Description : A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : - a) AND or OR gates b) XOR or XNOR gates c) NOR or NAND gates d) AND or NOR gates

Last Answer : A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : - NOR or NAND gates

A zero -level detector is a -

Description : A zero -level detector is a - a) comparator with a sine wave output b) comparator with a trip point referenced to zero c) peak detector d) limiter

Last Answer : A zero -level detector is a - comparator with a trip point referenced to zero

A single transistor can be used to build which of the following digital logic gates : -

Description : A single transistor can be used to build which of the following digital logic gates : - a) AND gates b) OR gates c) NOT gates d) NAND gates

Last Answer : a

The maximum phase lead is contributed by a phase lead network at: -

Description : The maximum phase lead is contributed by a phase lead network at: - a) mid corner frequency b) lower corner frequency c) upper corner frequency d) phase corner frequency

Last Answer : The maximum phase lead is contributed by a phase lead network at: -  mid corner frequency

With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across...

Description : With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across the diode? a) 0.3V b) 0.7V c) 0.9V d) 1.4V

Last Answer : 0.7V

Which of the following describes the operation of a positive edge - triggered D -type flip-flop?

Description : Which of the following describes the operation of a positive edge - triggered D -type flip-flop? a) if both inputs are HIGH, the output will toggle b) the output will follow the input on the leading ... on the leading edge of the clock and is passed to the output on the trailing edge of the clock.

Last Answer : Which of the following describes the operation of a positive edge - triggered D -type flip-flop?   the output will follow the input on the leading edge of the clock

The polarity of induced voltage while a field is collapsing is : -

Description : The polarity of induced voltage while a field is collapsing is : - a) independent of the force creating the field b) opposite to the force creating c) the field identical to the force creating d) the field present only if the force is stationary

Last Answer : The polarity of induced voltage while a field is collapsing is : - opposite to the force creating

The basic logic gate whose output is the complement of the input is the: -

Description : The basic logic gate whose output is the complement of the input is the: - a) OR gate b) AND gate c) inverter d) comparator

Last Answer : The basic logic gate whose output is the complement of the input is the: -  inverter

The output of an AND gate with three inputs, A, B and C, is HIGH when________.

Description : The output of an AND gate with three inputs, A, B and C, is HIGH when __________. a) A=1,B=1,C=0 b) A= 0,B= 0,C= 0 ' c) A=1,B=1,C=1 d) A=1,B= 0,C= 1

Last Answer : Sahara theme port n a n d Gate if two input Array Logic 0 the output is dash

Convert hexadecimal value 16 to decimal: -

Description : Convert hexadecimal value 16 to decimal: - a) 2210 b) 1610 c) 1010 d) 2010

Last Answer : Convert hexadecimal value 16 to decimal: - 2210

How many bits are needed to address 64 K memory: -

Description : How many bits are needed to address 64 K memory: - a) 3 b) 10 c) 16 d) 32

Last Answer : How many bits are needed to address 64 K memory: - 16

Which of the following flip-flop do not have race problem ?

Description : Which of the following flip-flop do not have race problem ? a)T flip-flop b) D flip-flop c) JK flip-flop d) Master Slave flip-flop

Last Answer : Which of the following flip-flop do not have race problem ? a)T flip-flop b) D flip-flop c) JK flip-flop d) Master Slave flip-flop

The ASCII is an input output code : -

Description : The ASCII is an input output code : - a) it is a two bit code b) it is a four bit code c) it is a seven bit code d) it is a eight bit code

Last Answer : The ASCII is an input output code : - it is a seven bit code

LED emits light : -

Description : LED emits light : - a) only in RED color b) only in YELLOW color c) only in GREEN color d) In RED, GREEN, YELLOW and AMBER color

Last Answer : LED emits light : -  In RED, GREEN, YELLOW and AMBER color

Wait status can be achieved in 8085 microprocessor by : -

Description : Wait status can be achieved in 8085 microprocessor by : - a) TRAP b) DMA c) HOLD d) INTR

Last Answer : Wait status can be achieved in 8085 microprocessor by : - HOLD

Damping torque used in energy meter is : -

Description :  Damping torque used in energy meter is : - a) Electrostatic b) Electro magnetic c) Eddy Current d) None

Last Answer : Damping torque used in energy meter is : - Eddy Current

Thermocouple is used to measure : -

Description : Thermocouple is used to measure : - a) AC b) DC c) Both d) None

Last Answer : Thermocouple is used to measure : - a) AC b) DC c) Both d) None

Moving coil in dynamometer wattmeter connected : -

Description :  Moving coil in dynamometer wattmeter connected : - a) in series with fixed coil b) across supply c) in series with load d) across load

Last Answer : Moving coil in dynamometer wattmeter connected : - across supply