Description : The length and width of a swimming pool are 50 metres and 15 metres respectively. If the depth of the swimming pool at one end is 10 -Maths 9th
Last Answer : 11250 m3 If we take the vertical crossection of the face of the swimming pool, then it is a trapezium ABCD, with parallel sides AD and BC respectively of lengths 10 m and 20 m and distance between parallel sides as 50 m ... 50]×15[12(10+20)×50]×15 m3 = (15 x 50 x 15) m3 = 11250 m3.
Description : The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is A. 100 cm B. 110 cm C. 120 cm D. 150 cm
Last Answer : ANS: C
Description : The width of a rectangular sewer is twice its depth while discharging 1.5 m/sec. The width of the sewer is A. 0.68 m B. 0.88 m C. 1.36 m D. 1.76 m
Description : The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m
Last Answer : ANS: D
Description : 15 cumecs, the depth d and width are related by For drains up to A. d = 0.2 B B. d = 0.5 B C. B = 0.2 d D. B = 0.5 d
Last Answer : ANS: B
Description : Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept ... . The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width
Description : In a sedimentation tank (length L, width B, depth D) the settling velocity of a particle for a discharge Q, is A. Q/(B × D) B. Q/(L × D) C. Q/L D. Q/(B × L)
Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ
Last Answer : (A) 3.6 W.D.V.ρ
Description : The ratio of width to depth for the most economical rectangular section in open channel flow is (A) 0.5 (B) 1 (C) 1.5 (D) 2
Last Answer : (D) 2
Description : If 'x' is the depth of flow in an open channel of large width, then the hydraulic radius is equal to (A) x (B) x/2 (C) x/3 (D) 2x/3
Last Answer : (A) x
Description : The location of centre of pressure, which defines the point of application of the total pressure force on the surface, can be calculated by applying the principle of moments according to which "sum of the moment of the resultant force about an ... liquid) (A) 1/(y/3) (B) 2y/3 (C) 1/(y/4) (D) 3y/4
Last Answer : (B) 2y/3
Description : In which system of tillage the crop is planted in unprepared soil by opening a narrow slot or trench only of sufficient width and depth to obtain proper seed coverage? a. Cost effective Tillage b. Absolute Tillage c. Zero Tillage d. Nominal Tillage
Last Answer : c. Zero Tillage
Description : The capability of a soil mass of full width and depth to transmit water, is known (A) Porosity (B) Permeability (C) Transmissibility (D) None of these
Last Answer : (B) Permeability
Description : For beams of uniform strength, if depth is constant, (A) Width b M (B) Width b M (C) Width b 3 M (D) Width b 1/M
Last Answer : (A) Width b M
Description : A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 × 106 N/mm2 , the deflection of the free end, is (A) 2 mm (B) 3 mm (C) 4 mm (D) 5 mm
Last Answer : (D) 5 mm
Description : The moment of inertia of a rectangular section of width and depth about an axis passing through C.G. and parallel to its width is (A) BD²/6 (B) BD3 /6 (C) BD3 /12 (D) B²D/6
Last Answer : (C) BD3 /12
Description : For a strongest rectangular beam cut from a circular log, the ratio of the width and depth, is (A) 0.303 (B) 0.404 (C) 0.505 (D) 0.707
Last Answer : (D) 0.707
Description : The width of a beam of uniform strength having a constant depth d length L, simply supported at the ends with a central load W is (A) 2WL/3fd² (B) 3WL/2fd² (C) 2fL/3Wd 4 (D) 3fL²/2Wd
Last Answer : (B) 3WL/2fd²
Description : If the width b and depth d of a beam simply supported with a central load are interchanged, the deflection at the centre of the beam will be changed in the ratio of (A) b/d (B) d/b (C) (d/b)2 (D) (b/d)
Last Answer : (D) (b/d)2
Description : The section modulus of a rectangular section is proportional to (A) Area of the section (B) Square of the area of the section (C) Product of the area and depth (D) Product of the area and width
Last Answer : (A) Area of the section
Description : The width b and depth d of a beam cut from a wooden cylindrical log of 100 cm diameter for maximum strength are: (A) b = 57.73 cm d = 81.65 cm (B) b = 81.65 cm d = 57.73 cm (C) b = 50.00 cm d = 50.00 cm (D) b = 40.00 cm d = 80.00 cm
Last Answer : (A) b = 57.73 cm d = 81.65 cm
Description : The deflection of any rectangular beam simply supported, is (A) Directly proportional to its weight (B) Inversely proportional to its width (C) Inversely proportional to the cube of its depth (D) Directly proportional to the cube of its length
Last Answer : (C) Inversely proportional to the cube of its depth
Description : Pick up the correct statement from the following: (A) If the ratio of depth to width is less than 2, it is shallow foundation (B) If the ratio of depth to width is more than 2, it is deep ... the ratio of the length to width is between 1 and 2, it is spread foundation (D) All the above
Last Answer : Answer: Option D
Description : A foundation is called shallow if its depth, is (A) One-fourth of its width (B) Half of its width (C) Three-fourth of its width (D) Equal to its width
Description : If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm
Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2
Last Answer : Answer: Option A
Description : Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which ... A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width
Last Answer : Answer: Option B
Description : A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm
Last Answer : Answer: Option C
Description : The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm
Description : The width of the rib of a T-beam, is generally kept between (A) 1/7 to 1/3 of rib depth (B) 1/3 to 1/2 of rib depth (C) 1/2 to 3/4 of rib depth (D) 1/3 to 2/3 of rib depth
Description : If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm
Description : For a ribbed slab (A) Clear spacing between ribs shall not be greater than 4.5 cm (B) Width of the rib shall not be less than 7.5 cm (C) Overall depth of the slab shall not exceed four times the breadth of the rib (D) All the above
Description : If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5
Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer
Description : If D is the depth of scour below original bed, then the width of launching apron is generally taken as (A) 1.2 D (B) 1.5 D (C) 2.0 D (D) 2.5 D
Description : The critical depth in a channel can be produced (A) By raising the bottom of the channel (B) By lowering the bottom of the channel (C) By decreasing the width of the channel (D) Both (a) and (c) of above
Description : The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom ... equal to half the width at the top (D) The sloping side is equal to the width at the bottom
Description : Pick up the correct statement from the following: (A) If the bed level is above N.S.L. the canal is called fully in baking and the berms are designed as 3 d where d is full supply depth of water ... and partly in filling and berms are designed as 2d where d is full supply depth (D) All the above
Last Answer : (D) All the above
Description : The excavation exceeding 1.5 m in width and 10 sq.m in plan area with a depth not exceeding 30 cm, is termed as (A) Excavation (B) Surface dressing (C) Cutting (D) Surface excavation
Last Answer : (D) Surface excavation
Description : Assertion A: Depth and width required at the entrance to a harbour are more than those required in the channel. Reason R: The entrance to a harbour is usually more exposed to waves as compared to the harbour itself. ... explanation of A (C) A is true but R is false (D) A is false but R is true
Last Answer : (A) Both A and R is true and R is the correct explanation of A
Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other
Description : Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is ... ) The pile which transfers the load to a hard rock bed at certain depth is called load bearing
Description : Vertical section of plough influences 1. Pulverization 2. Depth of cut 3. Width of cut 4. direction of pull
Last Answer : ans 2
Description : Vertical section of plough influence A. Pulverisation B. Depth of cut C. Width of cut. D. Direction of pull
Last Answer : Pulverisation
Description : Vertical section of plough influences A. Pulverization C. Width of cut B. Depth of cut D. Direction of pull
Last Answer : Depth of cut
Description : Consider the following statements: The time of BOD assimilation in a stream can be affected by 1. Ratio of stream depth to flow width. 2. Stream BOD value 3. BOD rate constant. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only
Last Answer : (a) 1, 2 & 3
Description : For hydraulically efficient rectangular channel of bed width 4.0 m, the depth of flow is (a) 4 m (b) 0.5 m (c) 1 m (d) 2 m
Last Answer : (d) 2 m
Description : Consider the following statements: Mitra's hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate ... a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only
Last Answer : d) 1 and 3 only
Description : Slenderness ratio of the column is the ratio of [ A ] the effective length to width of column [ B ] the effective length to depth of column [ C ] the effective length to least lateral design [ D ] none of the above
Last Answer : [ C ] the effective length to least lateral design
Description : The Percentage of steel in T-beam mainly based on [ A ] Flange width [ B ] Rib width [ C ] Flange depth [ D ] None of the above.
Last Answer : [ B ] Rib width