The steam input in to a turbogenerator connected to infinite bus is increased. Which of the events will take...

The steam input in to a turbogenerator connected to infinite bus is increased. Which of the events will take place? (a) The generator will feed more leading KVAR to bus bar and power angle will not change (b) The generator will feed more real power to bus bar and power angle will increase (c) The generator will feed more power to bus bar and power angle will decrease (d) The generator will feed more lagging KVAR to bus bar and power angle will not change
by

1 Answer

Answer :

The steam input in to a turbogenerator connected to infinite bus is increased. Which of the events will take place? (a) The generator will feed more leading KVAR to bus bar and power angle will not change (b) The generator will feed more real power to bus bar and power angle will increase (c) The generator will feed more power to bus bar and power angle will decrease (d) The generator will feed more lagging KVAR to bus bar and power angle will not change

by

Related questions

How does increase in steam input of the Alternator connected to infinite bus-bars affect this operation?

Description : How does increase in steam input of the Alternator connected to infinite bus-bars affect this operation?

Last Answer : KW output power of alternator increase with increase in steam input keeping excitation constant.

A 3~phase synchronous motor, connected to infinite bus, is operating at no load at normal excitation. ...

Description : A 3~phase synchronous motor, connected to infinite bus, is operating at no load at normal excitation. The field excitation of the motor is first decreased to zero and then increased in the ... 2) First decrease and then increase, (3) Increases continuously (4) First increase and then decreased

Last Answer : A 3~phase synchronous motor, connected to infinite bus, is operating at no load at normal excitation. The field excitation of the motor is first decreased to zero and then increased in the reverse direction. The armature current of the synchronous motor will: Increases continuously.

How does increase in excitation of the Alternator connected to infinite bus-bars affect this operation?

Description : How does increase in excitation of the Alternator connected to infinite bus-bars affect this operation?

Last Answer : Increase in excitation level of the synchronous generator will effectively increase the reactive power supplied by the generator keeping steam input constant.

A three phase, salient pole synchronous motor is connected to an infinite bus. It is operated at no load a

Description : A three phase, salient pole synchronous motor is connected to an infinite bus. It is operated at no load a normal excitation. The field excitation of the motor is first reduced to zero ... First increases and then decreases steeply (C) First decreases and then increases steeply (D) Remains constant

Last Answer : B

Why the input resistance of an ideal OPAMP is infinite and output resistance is zero? secondly, how can we measure these resistances(input and output) in case of an ideal OPAMPand Real OP-AMP in the following conditions when 1- load is not connected. 2- load is connected.

Description : Why the input resistance of an ideal OPAMP is infinite and output resistance is zero? secondly, how can we measure these resistances(input and output) in case of an ideal OPAMPand Real OP-AMP in the following conditions when 1- load is not connected. 2- load is connected.

Last Answer : Ans- Ideal OP-AMP is a power ful concept. If one goes through the history of amplifying devices it becomes clear that less it loads the previous stage better the output signal. ie ... . Can refer application notes by device manufacturer available in internet for more precise and practical solutions.

A synchronous generator is feeding power to infinite bus bars at unity power factor. Its excitation is now...

Description : A synchronous generator is feeding power to infinite bus bars at unity power factor. Its excitation is now increased. It will feed (a) The same power but at a leading power factor (b) The same power ... a lagging power factor (c) More power at unity power factor (d) Less power at unity power factor

Last Answer : A synchronous generator is feeding power to infinite bus bars at unity power factor. Its excitation is now increased. It will feed The same power but at a lagging power factor 

An alternator with frequency f1 is to be synchronized with an infinite bus of frequency f....

Description : An alternator with frequency f1 is to be synchronized with an infinite bus of frequency f. For proper synchronization (1) f1=f (2) f1<f (3)f1>f (4) either (b) or (c) 

Last Answer : A

The source of emergency lighting and power at loss of normal ship's power on a cargo vessel should be obtained from the ______________. A. emergency generator supply to the emergency switchboard B. emergency generator supply to the main switchboard C. battery supply to the main switchboard D. turbogenerator supply to the emergency switchboard

Description : The source of emergency lighting and power at loss of normal ship's power on a cargo vessel should be obtained from the ______________. A. emergency generator supply to the emergency ... switchboard C. battery supply to the main switchboard D. turbogenerator supply to the emergency switchboard

Last Answer : Answer: A

A four pole turbogenerator is used in conjunction with a 160 pole propulsion motor. If the generator is turning at 3,200 RPM, what is the current speed of the propeller? A. 40 RPM B. 60 RPM C. 80 RPM D. 100 RPM

Description : A four pole turbogenerator is used in conjunction with a 160 pole propulsion motor. If the generator is turning at 3,200 RPM, what is the current speed of the propeller? A. 40 RPM B. 60 RPM C. 80 RPM D. 100 RPM

Last Answer : Answer: C

A turbogenerator has a rated output of 1200 KW at 60 Hertz, with a no load frequency of 61.5 Hertz. What is its speed droop? A. 1.03% B. 1.50% C. 2.44% D. 2.50%

Description : A turbogenerator has a rated output of 1200 KW at 60 Hertz, with a no load frequency of 61.5 Hertz. What is its speed droop? A. 1.03% B. 1.50% C. 2.44% D. 2.50%

Last Answer : Answer: D

In the illustration, the component labeled 'EXC' is _______. EL-0003 A. a separate class II regulated DC generator for critical direct current loads B. a generator feeding the FLD winding through the voltage regulator. C. the controller to drive the governor for turbogenerator speed. D. the electronic driver for the switchboard metering circuits

Description : In the illustration, the component labeled 'EXC' is _______. EL-0003 A. a separate class II regulated DC generator for critical direct current loads B. a generator feeding the FLD ... to drive the governor for turbogenerator speed. D. the electronic driver for the switchboard metering circuits

Last Answer : Answer: B

The voltage of an operating AC turbogenerator is raised or lowered by adjusting the _____________. A. exciter generator governor controls B. synchronizing switch C. phase sequence switch D. generator field exciter

Description : The voltage of an operating AC turbogenerator is raised or lowered by adjusting the _____________. A. exciter generator governor controls B. synchronizing switch C. phase sequence switch D. generator field exciter

Last Answer : Answer: D

Which of the following will happen to the alternator frequency if the load is removed from a turbogenerator, whose governor has a 3% speed droop? A. It will remain unchanged. B. It will decrease by approximately 3%. C. It will become variable. D. It will increase.

Description : Which of the following will happen to the alternator frequency if the load is removed from a turbogenerator, whose governor has a 3% speed droop? A. It will remain unchanged. B. It will decrease by approximately 3%. C. It will become variable. D. It will increase.

Last Answer : Answer: D

What is meant by infinite bus-bars?

Description : What is meant by infinite bus-bars?

Last Answer : The source or supply lines with non-variable voltage and frequency are called infinite bus-bars. The source lines are said to have zero source impedance and infinite rotational inertia.

A cylinder rotor generator delivers 0.5 pu power in the steady-state to an infinite bus through a transmission

Description : A cylinder rotor generator delivers 0.5 pu power in the steady-state to an infinite bus through a transmission line of reactance 0.5 pu. The generator no-load voltage is 1.5 pu and the infinite bus voltage is 1 pu. The ... fault at the generator terminal is  (A) 53.5 (B) 60.2 (C) 70.8 (D) 79.6

Last Answer : A cylinder rotor generator delivers 0.5 pu power in the steady-state to an infinite bus through a transmission line of reactance 0.5 pu. The generator no-load voltage is 1.5 pu and the ... clearing angle, in degrees, for a three-phase dead short circuit fault at the generator terminal is 79.6

A large AC generator, supplying power to an infinite bus, has a sudden short-circuit occurring at its terminals

Description : A large AC generator, supplying power to an infinite bus, has a sudden short-circuit occurring at its terminals. Assuming the prime mover input and the voltage behind the transient reactance to remain constant immediately after the fault, acceleration of the generator rotor is

Last Answer : A large AC generator, supplying power to an infinite bus, has a sudden short-circuit occurring at its terminals. Assuming the prime mover input and the voltage behind the transient reactance ... , acceleration of the generator rotor is inversely proportional to the moment of inertia of the machine

Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1 (C) When a vertical plate is heated in infinite air environmental under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Description : Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 ... under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Last Answer : (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1

Characteristics impedance of a transmission line is the impedance measured at the ___________ when its length is infinite. A. input B. shorted end of the line C. output D. midsection

Description : Characteristics impedance of a transmission line is the impedance measured at the ___________ when its length is infinite. A. input B. shorted end of the line C. output D. midsection

Last Answer : A. input

If frequency of modulated wave is less than frequency of carrier wave, then input signal is A. negative B. positive C. zero D. infinite

Description : If frequency of modulated wave is less than frequency of carrier wave, then input signal is A. negative B. positive C. zero D. infinite

Last Answer : negative

The equivalent resistance between point A and B of an infinite network of resistance, each of `1Omega`, connected as shown, is

Description : The equivalent resistance between point A and B of an infinite network of resistance, each of `1Omega`, connected as shown, is

Last Answer : The equivalent resistance between point A and B of an infinite network of resistance, each of `1Omega`, connected ... C. `(1+sqrt5)/(2)Omega` D. zero

If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Description : If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Last Answer : same

Momentum of two objects moving with same speed but in opposite direction upon collision is A. increased B. decreased C. is zero D. is infinite

Description : Momentum of two objects moving with same speed but in opposite direction upon collision is A. increased B. decreased C. is zero D. is infinite

Last Answer : is zero

Generating capacity connected to the bus bars and ready to take load when switched on is known as ?

Last Answer : Generating capacity connected to the bus bars and ready to take load when switched on is known as spinning reserve.

A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input

Description : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is :

Last Answer : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is : 200 V

Two wattmeters connected to measure the power input to a balanced three-phase circuit indicate ...

Description : Two wattmeters connected to measure the power input to a balanced three-phase circuit indicate 4.5 KW and 3 KW respectively. Find the power factor of the circuit. A. 0.7 B. 0.8 C. 0.95 D. 0 

Last Answer : Two wattmeters connected to measure the power input to a balanced three-phase circuit indicate 4.5 KW and 3 KW respectively. Find the power factor of the circuit.  0.95

The ……….. is code that recognizes some special sequence of input or is triggered by being run from a certain user ID of by unlikely sequence of events. a) Trap doors b) Trojan horse c) Logic Bomb d) Virus

Description : The ……….. is code that recognizes some special sequence of input or is triggered by being run from a certain user ID of by unlikely sequence of events. a) Trap doors b) Trojan horse c) Logic Bomb d) Virus

Last Answer : a) Trap doors

The ……….. is code that recognizes some special sequence of input or is triggered by being run from a certain user ID of by unlikely sequence of events. A) Trap doors B) Trojan horse C) Logic Bomb D) Virus

Description : The ……….. is code that recognizes some special sequence of input or is triggered by being run from a certain user ID of by unlikely sequence of events. A) Trap doors B) Trojan horse C) Logic Bomb D) Virus

Last Answer : A) Trap doors

Which is the input of control unit: a. Master clock signal b. Instruction register c. Flags d. Control signals from bus e. Allof these

Description : Which is the input of control unit: a. Master clock signal b. Instruction register c. Flags d. Control signals from bus e. Allof these

Last Answer : e. Allof these

Consider a 32 - bit microprocessor, with a 16 - bit external data bus, driven by an 8 MHz input clock. Assume that the microprocessor has a bus cycle whose minimum duration equals four input clock cycles. What is the maximum data transfer rate for this microprocessor? (A) 8x106 bytes/sec (B) 4x106 bytes/sec (C) 16x106 bytes/sec (D) 4x109 bytes/sec

Description : Consider a 32 - bit microprocessor, with a 16 - bit external data bus, driven by an 8 MHz input clock. Assume that the microprocessor has a bus cycle whose minimum duration equals four input clock cycles. What ... (A) 8x106 bytes/sec (B) 4x106 bytes/sec (C) 16x106 bytes/sec (D) 4x109 bytes/sec 

Last Answer : (B) 4x106 bytes/sec

Direct relation between…….. &………of saturated steam, the amount of energy input to process easy to control. a) volume, pressure b) volume, temperature c) temperature, pressure d) None of above

Description : Direct relation between…….. &………of saturated steam, the amount of energy input to process easy to control. a) volume, pressure b) volume, temperature c) temperature, pressure d) None of above

Last Answer : c) temperature, pressure

Pick up the incorrect statement from the following a. The activity which consumes maximum time, is called a node b. The activity is the time consuming part of a project c. The beginning and end of a job, are called events d. Logically and sequentially connected activities and events form a network

Description : Pick up the incorrect statement from the following a. The activity which consumes maximum time, is called a node b. The activity is the time consuming part of a project c. The beginning ... of a job, are called events d. Logically and sequentially connected activities and events form a network

Last Answer : a. The activity which consumes maximum time, is called a node

Pick up the incorrect statement from the following: (A) The activity is the time consuming part of a project (B) The beginning and end of a job, are called events (C) The activity which consumes maximum time, is called a node (D) Logically and sequentially connected activities and events form a network

Description : Pick up the incorrect statement from the following: (A) The activity is the time consuming part of a project (B) The beginning and end of a job, are called events (C) The activity ... maximum time, is called a node (D) Logically and sequentially connected activities and events form a network

Last Answer : (C) The activity which consumes maximum time, is called a node

Why peripherals are not connected directly to the system bus?

Description : Why peripherals are not connected directly to the system bus?

Last Answer : One of the major reasons is the peripherals' cabling would puttoo much capacitive loading on the system bus, either slowing itsoperation by orders of magnitude or making it impossible to operateat all!

Network components are connected to the same cable in the _____ topology. 1) Star 2) Ring 3) Bus 4) Mesh 5) Mixed

Description : Network components are connected to the same cable in the _____ topology. 1) Star 2) Ring 3) Bus 4) Mesh 5) Mixed

Last Answer : Answer :2

Regarding an AC generator connected to the main electrical bus; as the electric load and power factor vary, a corresponding change is reflected in the generator armature reaction. These changes in armature reaction are compensated for by the __________ A. governor speed droop setting B. voltage regulator C. balance coil D. phase-balance relay

Description : Regarding an AC generator connected to the main electrical bus; as the electric load and power factor vary, a corresponding change is reflected in the generator armature reaction. These changes in ... . governor speed droop setting B. voltage regulator C. balance coil D. phase-balance relay

Last Answer : Answer: B

If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Last Answer : C) Star Topology

State weather the following statement is true or false for Token Bus 1).It is a linear or tree- shaped cable onto which the stations are attached. 2). the token propagates around the logical ring, with only the token holder being permitted to transmit frames 3). In this token bus arrangement The physical order in which the stations are connected to the cable is very important. A. 1. False, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Description : State weather the following statement is true or false for Token Bus 1).It is a linear or tree- shaped cable onto which the stations are attached. 2). the token propagates around the logical ring, with only the token holder ... 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : D. 1. true, 2. true, 3. false

Which of the following is correct regarding Bus Topology: a) All nodes (file server, workstations and peripherals) are connected to the linear cable. b) Popular on LANs because that are inexpensive and easy to install c) A bus topology consists of a main run of cable with a terminator at each end. d) All of Above e) None of These

Description : Which of the following is correct regarding Bus Topology: a) All nodes (file server, workstations and peripherals) are connected to the linear cable. b) Popular on LANs because that are inexpensive and easy to ... main run of cable with a terminator at each end. d) All of Above e) None of These

Last Answer : d) All of Above

In a load flow analysis of a power system, the load connected at a bus is represented as a) Constant current drawn from the bus b) Constant impedance connected at the bus c) Voltage and frequency dependent sources at the boss d) Constant real and reactive power drawn from the bus

Description : In a load flow analysis of a power system, the load connected at a bus is represented as a) Constant current drawn from the bus b) Constant impedance connected at the bus c) Voltage and frequency dependent sources at the boss d) Constant real and reactive power drawn from the bus

Last Answer : d) Constant real and reactive power drawn from the bus

The value of off diagonal elements is a) sum of admittances connected at bus j b) which is connected between bus i and bus j with positive sign c) which is connected between bus i and bus j with negative sign d) sum of admittances connected at bus i

Description : The value of off diagonal elements is a) sum of admittances connected at bus j b) which is connected between bus i and bus j with positive sign c) which is connected between bus i and bus j with negative sign d) sum of admittances connected at bus i

Last Answer : c) which is connected between bus i and bus j with negative sign

um of the elements of row i equal to shunt admittances connected to bus i. If this summation is zero, indicates there is no a) shunt admittance b) mutual coupling c) both 1 and 2 d) none of the above

Description : um of the elements of row i equal to shunt admittances connected to bus i. If this summation is zero, indicates there is no a) shunt admittance b) mutual coupling c) both 1 and 2 d) none of the above

Last Answer : c) both 1 and 2

Which register is connected to the memory by way of the address bus: a. MAR b. MDR c. SAM d. None of these

Description : Which register is connected to the memory by way of the address bus: a. MAR b. MDR c. SAM d. None of these

Last Answer : a. MAR

If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Last Answer : C) Star Topology

When an alternator connected to the bus-bar is shut down the bus-bar voltage will (a) fall (b) rise (c) remain unchanged (d) none of the above

Description : When an alternator connected to the bus-bar is shut down the bus-bar voltage will (a) fall (b) rise (c) remain unchanged (d) none of the above

Last Answer : (c) remain unchanged

In load flow analysis, the load connected at a bus is represented as?

Description : In load flow analysis, the load connected at a bus is represented as?

Last Answer : constant real and reactive powers drawn from bus

Which one of the following is the correct matching of the events occurring during menstrual cycle? (a) Proliferative phase : Rapid regeneration of myometrium and maturation of Graafian follicle (b) Secretory phase : Development of corpus luteum and increased secretion of progesterone (c) Menstruation : Breakdown of myometrium and ovum not fertilised (d) Ovulation : LH and FSH attain peak level and sharp fall in the secretion of progesterone

Description : Which one of the following is the correct matching of the events occurring during menstrual cycle? (a) Proliferative phase : Rapid regeneration of myometrium and maturation of Graafian follicle (b) ... ) Ovulation : LH and FSH attain peak level and sharp fall in the secretion of progesterone

Last Answer : (b) Secretory phase : Development of corpus luteum and increased secretion of progesterone

Jake’s Market recorded the following events involving a recent purchase of merchandise: Received goods for $20,000, terms 2/10, n/30. Returned $400 of the shipment for credit. Paid $100 freight on the shipment. Paid the invoice within the discount period. As a result of these events, the company’s merchandise inventory a. increased by $19,208. b. increased by $19,700. c. increased by $19,306. d. increased by $19,308.

Description : Jake's Market recorded the following events involving a recent purchase of merchandise: Received goods for $20,000, terms 2/10, n/30. Returned $400 of the shipment for credit. Paid $100 freight on the shipment. ... . b. increased by $19,700. c. increased by $19,306. d. increased by $19,308.

Last Answer : d. increased by $19,308.

Zach’s Market recorded the following events involving a recent purchase of merchandise: Received goods for $50,000, terms 2/10, n/30. Returned $1,000 of the shipment for credit. Paid $250 freight on the shipment. Paid the invoice within the discount period. As a result of these events, the company’s merchandise inventory a. increased by $48,020. b. increased by $49,250. c. increased by $48,265. d. increased by $48,270.

Description : Zach's Market recorded the following events involving a recent purchase of merchandise: Received goods for $50,000, terms 2/10, n/30. Returned $1,000 of the shipment for credit. Paid $250 freight on the shipment ... 020. b. increased by $49,250. c. increased by $48,265. d. increased by $48,270.

Last Answer : d. increased by $48,270.

What happens to the bus bar dimensions of the waveguide when the frequency is increased?

Description : What happens to the bus bar dimensions of the waveguide when the frequency is increased?

Last Answer : The bus bar becomes wider.