Who has the responsibility of ensuring the welder is using the correct polarity during welding? a) The welder and the welding inspector b) Store man and the welder c) Welding Engineer d) The Q/A department

Who has the responsibility of ensuring the welder is using the correct polarity during welding?  
a) The welder and the welding inspector b) Store man and the welder  
c) Welding Engineer d) The Q/A department
by

1 Answer

Answer :

a) The welder and the welding inspector
by

Related questions

Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable

Description : Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable

Last Answer : a) The welding engineer

Who has the final responsibility of sentencing and accepting a weld on completion? a) The contractor’s inspector b) Site manager c) The welder d) The client’s inspector or certifying authority

Description : Who has the final responsibility of sentencing and accepting a weld on completion? a) The contractor’s inspector b) Site manager c) The welder d) The client’s inspector or certifying authority

Last Answer : d) The client’s inspector or certifying authority

What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant information c) None if the tensile strength of the consumables is the same as the approved one d) Change the electrode for the correct type and continue welding

Description : What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant ... the same as the approved one d) Change the electrode for the correct type and continue welding

Last Answer : b) Report the incident and record all relevant information

Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder as he knows which welds are likely to produce the least defects c) This will be referenced in the inspection and test plan d) Nobody, as welding is always carried out to a high standard the use of percentage NDT is of no real value

Description : Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder ... welding is always carried out to a high standard the use of percentage NDT is of no real value

Last Answer : c) This will be referenced in the inspection and test plan

t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved qualification to cover the intended scope of work d) Yes as long as no NDT is required on the finished weld

Description : t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved ... cover the intended scope of work d) Yes as long as no NDT is required on the finished weld

Last Answer : a) Never

Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Description : Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Last Answer : d) The workshop humidity

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

Who is responsible for site safety? a) Site Quality Engineer b) Welding Supervisor c) An approved safety engineer d) Everyone

Description : Who is responsible for site safety? a) Site Quality Engineer b) Welding Supervisor c) An approved safety engineer d) Everyone

Last Answer : d) Everyone

Who should have access to the WPQR’S? a) NDT operators b) Inspectors only c) Welders only d) Welding Engineer

Description : Who should have access to the WPQR’S? a) NDT operators b) Inspectors only c) Welders only d) Welding Engineer

Last Answer : d) Welding Engineer

welding i want to weld steel bars to my trailer should i use a arch welder or a wire feed welder?

Description : welding i want to weld steel bars to my trailer should i use a arch welder or a wire feed welder?

Last Answer : arch welding is a more stable form of welding. it get hotter and creates a stronger bond

Mark the incorrect option a) An Inspector must posses a practical knowledge of post office work, and with all departmental forms so as to be qualified to instruct his subordinates in their duties, especially when any new class of business is undertaken by the Department. b) He must also be qualified to take charge of a head office or important sub-office in any sudden emergency c) An inspector must be having knowledge of Technology and management. d) None of these

Description : Mark the incorrect option a) An Inspector must posses a practical knowledge of post office work, and with all departmental forms so as to be qualified to instruct his subordinates in their duties ... emergency c) An inspector must be having knowledge of Technology and management. d) None of these

Last Answer : c) An inspector must be having knowledge of Technology and management.

In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Description : In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Last Answer : d) They give more accurate indications

What is the average salary for an entry level job as a welding engineer?

Description : What is the average salary for an entry level job as a welding engineer?

Last Answer : The average salery for an entry level job as a welding engineeris pretty good you will make $56000 a year which isn't bad its amoderate living to survive.

When using multiple SAW arc systems (twin wires etc), the arcs often have different polarities or use all AC rather than DC polarity, this is to? a) Prevent arc blow between arcs b) To maximize productivity c) To even out the power factor on the mains supply d) Make it easier to initiate the arc

Description : When using multiple SAW arc systems (twin wires etc), the arcs often have different polarities or use all AC rather than DC polarity, this is to? a) Prevent arc blow between arcs b) To maximize productivity c) To even out the power factor on the mains supply d) Make it easier to initiate the arc

Last Answer : a) Prevent arc blow between arcs

The head of public works department of any Indian state, is (A) Transport Minister (B) Chief Engineer (C) Superintending Engineer (D) Executive Engineer

Description : The head of public works department of any Indian state, is (A) Transport Minister (B) Chief Engineer (C) Superintending Engineer (D) Executive Engineer

Last Answer : Answer: Option B

Q-9 how many electrodes are used in the TANDEM SAW? What is the polarity of the both electrode?

Description : Q-9 how many electrodes are used in the TANDEM SAW? What is the polarity of the both electrode?

Last Answer : In TANDEM SAW process there are more than one electrode is used. But for first electrode alternative current and for second electrode direct current shall be used.

Q-3 Write the energy distribution for different polarity?

Description : Q-3 Write the energy distribution for different polarity?

Last Answer : DCEP – 67% at electrode and 33% at job. • DCEN – 33 % at electrode and 67% at job. • AC – 50 % at electrode and 50% job.

Q-7 during welding process, why sinusoidal wave form is converted in to the square wave form?

Description : Q-7 during welding process, why sinusoidal wave form is converted in to the square wave form?

Last Answer : In sinusoidal wave, we get maximum energy at one point only. So for the more amount of maximum energy we can get by converting the sinusoidal wave form in to the square wave form, and more penetration and deposition rate is achieved due to maximum energy.

Choose the correct statement about the role of opioid antimotility drugs in the management of diarrhoeas (a) They are used to control diarrhoea irrespective of its etiology (b) They should be used only as a short-term measure after ensuring that enteroinvasive organisms are not involved (c) They are used as adjuvants to antimicrobial therapy of diarrhoea (d) They are the drugs of choice in irritable bowel syndrome diarrhoea

Description : Choose the correct statement about the role of opioid antimotility drugs in the management of diarrhoeas (a) They are used to control diarrhoea irrespective of its etiology (b) They should be ... therapy of diarrhoea (d) They are the drugs of choice in irritable bowel syndrome diarrhoea

Last Answer : Ans: B

4 Choose the correct statement about the role of opioid antimotility drugs in the management of diarrhoeas: A. They are used to control diarrhoea irrespective of its etiology B. They should be used only as a short-term measure after ensuring that enteroinvasive organisms are not involved C. They are used as adjuvants to antimicrobial therapy of diarrhoea D. They are the drugs of choice in irritable bowel syndrome diarrhoea

Description : 4 Choose the correct statement about the role of opioid antimotility drugs in the management of diarrhoeas: A. They are used to control diarrhoea irrespective of its etiology B. They should ... antimicrobial therapy of diarrhoea D. They are the drugs of choice in irritable bowel syndrome diarrhoea

Last Answer : B. They should be used only as a short-term measure after ensuring that enteroinvasive organisms are not involved

Setting the number of defects before the lot is rejected, is a direct responsibility of : 1. a functional worker 2. the project manager 3. management 4. the accounting department

Description : Setting the number of defects before the lot is rejected, is a direct responsibility of : 1. a functional worker  2. the project manager  3. management  4. the accounting department

Last Answer : 3. management

The responsibility for adopting sound accounting policies, maintaining adequate internal control, and making fair representations in the financial statements rests a. With the management. b. With the independent auditor. c. Equally with management and the auditor. d. With the internal audit department.

Description : The responsibility for adopting sound accounting policies, maintaining adequate internal control, and making fair representations in the financial statements rests a. With the management. b. With the independent ... c. Equally with management and the auditor. d. With the internal audit department.

Last Answer : With the management

Which of the following is considered a primary reason for creating an internal audit department? a. To safeguard resources entrusted to the organization. b. To evaluate and improve the effectiveness of control processes. c. To ensure the accuracy, reliability, and timeliness of financial and operating data used in management's decision making. d. To relieve management of the responsibility for establishing effective controls

Description : Which of the following is considered a primary reason for creating an internal audit department? a. To safeguard resources entrusted to the organization. b. To evaluate and improve the ... 's decision making. d. To relieve management of the responsibility for establishing effective controls

Last Answer : To evaluate and improve the effectiveness of control processes.

Which of the following defects is usually associated with the MAG GMAW) welding process when using Dip Transfer? a) Centerline cracking b) Lack of side wall Fusion c) Undercut d) Tungsten inclusions

Description : Which of the following defects is usually associated with the MAG GMAW) welding process when using Dip Transfer? a) Centerline cracking b) Lack of side wall Fusion c) Undercut d) Tungsten inclusions

Last Answer : b) Lack of side wall Fusion

Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps

Description : Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps

Last Answer : a) MAG (GMAW)

Why it is sometimes necessary to preheat the base material before welding? a) To remove oil and grease b) To remove moisture from inside the material c) To prevent the possible risk of cracking d) Not required if using cellulosic electrodes as these will provide enough heat

Description : Why it is sometimes necessary to preheat the base material before welding? a) To remove oil and grease b) To remove moisture from inside the material c) To prevent the possible risk of cracking d) Not required if using cellulosic electrodes as these will provide enough heat

Last Answer : c) To prevent the possible risk of cracking

When measuring AC current flow, you must always connect the meter _____________. A. in series with the power source and load B. in parallel with the power source and load C. insuring correct polarity D. using the lowest range possible to prevent instrument damage

Description : When measuring AC current flow, you must always connect the meter _____________. A. in series with the power source and load B. in parallel with the power source and load C. insuring correct polarity D. using the lowest range possible to prevent instrument damage

Last Answer : Answer: A

Why is it important to store a welding hose using a welding hose reel?

Description : Why is it important to store a welding hose using a welding hose reel?

Last Answer : Any damage to a welding hose can end up causing serious damage to the person using it. Using a welding hose reel will significantly reduce the chance of a rip or tear in the hose, making the user that much safer. It's important to utilize welding hose reels for proper storage and to stay organized.

How rejected portion are to be disposed-off? (i) By Igniting 5 Portions at a time in pit away from store?* (ii) By throwing them away (iii) By dispose off in a pit (iv) By using it in Branch/Yard lines for welding

Description : How rejected portion are to be disposed-off? (i) By Igniting 5 Portions at a time in pit away from store?* (ii) By throwing them away (iii) By dispose off in a pit (iv) By using it in Branch/Yard lines for welding

Last Answer : (i) By Igniting 5 Portions at a time in pit away from store?*

During root welding, which of the following would be the main cause of excess penetration? a) The root gap is too small in accordance with WPS b) Preheat not used c) The current is too high d) Root face is too large

Description : During root welding, which of the following would be the main cause of excess penetration? a) The root gap is too small in accordance with WPS b) Preheat not used c) The current is too high d) Root face is too large

Last Answer : c) The current is too high

Qualification of Inspector of Post office is a) An inspector must be a man of active habits and physically able to stand the strain of constant traveling, by night as will as day. b) He must be thoroughly acquainted with the work of post office and the positions of Post office and mail lines c) He must be able to conduct efficiency the investigation that are entrusted to him d) All the above

Description : Qualification of Inspector of Post office is a) An inspector must be a man of active habits and physically able to stand the strain of constant traveling, by night as will as day. b) He must be ... c) He must be able to conduct efficiency the investigation that are entrusted to him d) All the above

Last Answer : d) All the above

You are using a mechanical voltage tester to check the fuses in a three-phase circuit supplying an electric motor. For which of the following reasons must the motor be stopped during the test? A. Testing an energized circuit presents a hazard to the testing personnel. B. A faulty fuse could go undetected with the motor energized. C. Reversed polarity of the circuit would be indicated by the voltage tester with the circuit energized. D. All of the above.

Description : You are using a mechanical voltage tester to check the fuses in a three-phase circuit supplying an electric motor. For which of the following reasons must the motor be stopped during the test? A. ... circuit would be indicated by the voltage tester with the circuit energized. D. All of the above.

Last Answer : Answer: B

Ideas for something fun to reverse engineer and take apart?

Description : Ideas for something fun to reverse engineer and take apart?

Last Answer : answer:While this might sound boring, ripping apart our front loading washing machine to clean the pump was interesting. It wasn't really hard but it was interesting. I just tried to replace the home ... iPhone 4 and it was a fucking disaster. A washing machine is way easier to get back together.

The first chip ………… was made by Intel in 1971 scientist Ted Hoff and engineer Frederico Faggin -Technology

Description : The first chip ………… was made by Intel in 1971 scientist Ted Hoff and engineer Frederico Faggin -Technology

Last Answer : The first chip Intel 4004was made by Intel in 1971 scientist Ted Hoff and engineer Frederico Faggin

Can I use a 115v 26 amp welder on a regular outlet?

Description : Can I use a 115v 26 amp welder on a regular outlet?

Last Answer : answer:As long as the wiring and the breakers are at least 30 amp you should be okay. Don't try to use it in a 20 amp circuit. If in doubt have someone come in and test the circuits, or ... . A little effort and money spent up front may save you from burning down your garage and possibly your house.

What are the pros and cons of becoming a welder?

Description : What are the pros and cons of becoming a welder?

Last Answer : answer:It's a good craft and well paid when there is work. If you're into the building trades, it is a good choice. On the other hand, you don't do much more than weld all the time. And if ... working construction you might be in a ditch or outdoors in bad weather. But that's true of a lot of jobs.

Any tips for a novice welder?

Description : Any tips for a novice welder?

Last Answer : answer:My tip is this. Have a potato with you at all times. My father was a mechanical engineer that owned a welding and machine shop. After school we went to the shop. When I wasn't sweeping I was bolting ... eyes. It still hurt but it was a lot better. And practice.. Being a good welder is a art.

What should I get for my first welder, arc or stick?

Description : What should I get for my first welder, arc or stick?

Last Answer : ‘pends, I think you should get the arc.

How to land top welder jobs?

Description : How to land top welder jobs?

Last Answer : Welding is an industry where lots of really good jobs exist. If you want to be competitive for welder jobs, then you have to do the right things to position yourself. These jobs pay very ... jobs. These places have dedicated programs that do nothing but provide prospective welders with a skill set.

How many pipe welder jobs are currently open?

Description : How many pipe welder jobs are currently open?

Last Answer : That depends, are you wondering about pipe welder jobs at acertain company, in a certain city, a certain state, or all thejobs in the country? If you want to know about a certain company,contact the ... out. If it is one of the other choices,narrow down the demographic on monster to get an idea.

What is the salary for an underwater welder?

Description : What is the salary for an underwater welder?

Last Answer : While underwater welding is a dangerous career, it can be very lucrative and pay upwards of 100,000 dollars per year with a median salary around 90,000 dollars annually

what is the salary of an underwater welder?

Description : what is the salary of an underwater welder?

Last Answer : An underwater welder starts off in the mid 40s. You should research this on any website and scan salary given in ads. You may want to call a center by using 411. This could direct you to an actual center.

What kind of experience do I need to be a welder?

Description : What kind of experience do I need to be a welder?

Last Answer : According to my research in order to become a Welder you will need to take a test to receive your Welder's certificate. Once you get the certificate you can apply for jobs.

How do I learn to be a professional welder?

Description : How do I learn to be a professional welder?

Last Answer : Most community colleges offer welding as a degree. You will have a teacher who knows everything about welding and has the experience to back them up.

does a welder have to do any type of schooling/classes?

Description : does a welder have to do any type of schooling/classes?

Last Answer : There are multiple technical trade schools that provide welding classes and certification programs. One example is http://www.witcc.edu

New AT weld should be entered in TMS by ? (i) Sectional JE/SSE* (ii) Incharge SSE (iii) Welder (iv) None of the above

Description : New AT weld should be entered in TMS by ? (i) Sectional JE/SSE* (ii) Incharge SSE (iii) Welder (iv) None of the above

Last Answer : (i) Sectional JE/SSE*